OPMN Configuration Assistant failure

Having trouble getting EM Grid Control installed using a pre-existing 10g db instance.
OPMNCTL always fails as follows :
trinity: /u01/app/oracle/product/10.1.0em/opmn/bin>./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=trinity:6200
0 of 1 processes started.
ias-instance id=EnterpriseManager0.trinity
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=13660)
failed to start a managed process after the maximum retry limit
Log:
/u01/app/oracle/product/10.1.0em/opmn/logs/HTTP_Server~1
Nothing useful in the logs. Any help ?

Hi,
HTTP Failed during configuration tools after install. It is impossbile to startup manually with opmnctl or dcmctl. I have tried with
Oracle support France.
I think it's not a configuration problem, Ive tried this :
In addition to uncommenting 'jserv.conf' from httpd.conf, you may need to do the following changes:
In jserv.properties file, modify wrapper.env.copy=DISPLAY to 'wrapper.env=DISPLAY=<localhost_display:0.0>'.
Pls make sure X-Server is running on your local host and DISPLAY value set is right.
When I try to startup apache manually, I have this msg :
apachectl start
./apache : line -266 : 12421 Erreur de segmentation (core dumped) /usr/./ApacheApache/httpd -d /usr/.../Apache/Apache
/apachectl start : httpd could not be startedProble with glibc ??
I have glibc 2.2.2-10 as requires for RH 7.1. In addendum for install RH 2.1, (http://technet.oracle.com/docs/products/ias/doc_library/90200unix_otn/docs.htm.) they talk about glibc 2.2.4-25. Is it possible to use
it ?? Without modify my kernel in 2.4.3-12 ??
Thanks.

Similar Messages

  • OPMN Configuration Assistant Fails during Installation

    Hi,
    I am trying to install Oracle 10g 10.1.2 (Release 2) in Windows 2K platform, it fails in the installation with the message as "OPMN Configuration Assistant Fails" in the OUI installation wizard and does not proceed at the end of it.
    Then when I try to goto console of opmn and do startall and find out the status, it gives the status as OHS down. ANy idea why this is happening ?
    Regds,
    Nagarajan K.

    Hi Nagarajan!
    When the OHS does not start most of the config assitants will fail. Often the failures occur due to a bad network configuration (check your hosts file), more than one network card or an already running process on that port (eg you already have an Apache running on this machine).
    In the cfgtoollogs a detailled error should be reported in the installactions file.
    cu
    Andreas

  • OPMN configuration assistant failed while applying patch on SOA 10.1.3.1

    Hi All,
    I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
    The error msg i got is:
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Output generated from configuration assistant "Run One-off OPatches":
    Oracle Interim Patch Installer version 1.0.0.0.56
    Copyright 2006 Oracle Corporation. All Rights Reserved..
    We recommend you refer to the OPatch documentation under
    OPatch/docs for usage reference. We also recommend using
    the latest OPatch version. For the latest OPatch version
    and other support related issues, please refer to document
    293369.1 which is viewable from metalink.oracle.com
    ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
    OPatch returns with error code = 100
    Configuration assistant "Run One-off OPatches" succeeded
    Output generated from configuration assistant "OPMN Configuration Assistant":
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    2 of 3 processes started.
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server/
    Error
    --> Process (index=1,uid=1392512192,pid=4728)
    failed to start a managed process after the maximum retry limit
    Log:
    D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    can you please suggest a way out for this error .
    Edited by: user10451494 on May 24, 2009 10:24 AM

    Did you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
    Thanks
    Shail

  • OPMN configuration assistant fails on Install

    We are installing B2B intergation and during the install the OPMN configuration Assistant Fails. The error description is
    Error
    --> Process (pid=2942)
    failed to start a managed process after the maximum retry limit
    Log:
    /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
    The log shows:
    06/05/17 14:56:49 Start process
    May 17, 2006 2:56:51 PM: Starting B2B Engine -MTProd.helenab2b.helenachemical.com..
    May 17, 2006 2:57:00 PM: There was an error starting B2B Engine -MTProd.helenab2b.helenachemical.com.
    Any ideas how to proceed.. we are in the process of opening a TAR.
    Thanks

    Please turn on the debug trace in tip.properties
    Since we want to see why B2B did not start, we want to have as much trace as possible. Please set the following (in tip.properties)
    b2b.oracle.tip.DiagnosticLevel = DEBUG
    oracle.tip.LogType = text
    If there is an exception in also should be logged in /home/oracle/MTProd/opmn/logs/B2B~B2BServer~MTProd.helenab2b.helenachemical.com~1
    Please gather as much trace information as possible when you start the B2B Server manually.
    If opmn is not started, use the 'opmnctl start' command in $ORACLE_HOME/opmn/bin
    Then use the following command to start B2B:
    opmnctl startproc process-type=B2BServer
    Thanks,
    Eng

  • OC4J configuration assistant failure at infrastructure installation

    Hi all,
    We want to upgrade our client server application(forms 6i and 9iDB) to Application server(3 tire). I am trying to install Oracle 9iAS Release 2, Release 9.0.2.0.1 on Win 2000 server with service pack 2.
    OC4J configuration assistant is failing by showing the below error log. Please suggest me what is the problem and how to rectify it.
    Reading ini file - 'D:\ora9ias/j2ee/deploy.ini'
    OC4J instance 'OC4J_Demos': Adding property 'jbo.server.in_oc4j=true'
    OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB'
    OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB'
    OC4J instance 'OC4J_Demos': Adding OC4J command line option '-userThreads'
    OC4J instance 'OC4J_Demos': Adding java command line option '-Xmx512M'
    OC4J instance 'OC4J_Demos': Adding property 'oracle.path=%s_javapPath%'
    OC4J instance 'OC4J_Demos': Adding property 'oracle.display=:0.0'
    OC4J instance 'OC4J_Demos': Adding Environment variable '%LIB_PATH_ENV%' with value '%LIB_PATH_VALUE%'
    OC4J instance 'OC4J_Demos': Adding Environment variable 'PATH' with value 'D:/ora9ias/bin'
    OC4J instance 'OC4J_Demos': Property 'jbo.server.in_oc4j' already exists with value 'true'
    OC4J instance 'home': Adding property 'jbo.server.in_oc4j=true'
    OC4J instance 'OC4J_DAS': Adding java command line option '-server'
    OC4J instance 'OC4J_DAS': Adding java command line option '-Xincgc'
    OC4J instance 'OC4J_DAS': Adding java command line option '-Xmx256m'
    OC4J instance 'OC4J_DAS': Adding java command line option '-Xnoclassgc'
    OC4J instance 'OC4J_DAS': Adding Environment variable 'PATH' with value 'D:\ora9ias\bin'
    Initializing DCM...done.
    Creating OC4J instance 'OC4J_Demos'...done.
    OC4J instance 'home' already exists.
    Creating OC4J instance 'OC4J_DAS'...done.
    Starting OC4J instance 'OC4J_Demos'...done.
    Deploying application 'jocdemo' to OC4J instance 'OC4J_Demos'...done.
    Deploying application 'ojspdemos' to OC4J instance 'OC4J_Demos'...done.
    Adding dependent libraries for application 'ojspdemos'...done.
    Deploying application 'sqljdemos' to OC4J instance 'OC4J_Demos'...
    ERROR: Deploy failed.
    Error message returned is: Instance: soft.DEMO.PENTASOFT.COM.MY Message:
    See base exception for details.
    Base Exception:
    java.lang.NullPointerException:nullSee base exception for details.
    Deploying application 'jazndemos' to OC4J instance 'OC4J_Demos'...
    ERROR: Caught exception during deploy.
    Deploying application 'BC4JJSPDemo' to OC4J instance 'OC4J_Demos'...oracle.ias.sysmgmt.exception.TaskException:
    The configuration files for this Oracle9iAS instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    no further configuration or deployment operations are allowed until the problem with the
    configuration on the filesystem is resolved. This condition arises when a prior operation was
    unsuccessful. Please check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    *     permissions on files
    *     file contention issues on Windows NT
    *     EMD and dcmctl running concurrently
    *     internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
         at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    oracle.ias.sysmgmt.exception.TaskException: The configuration files for this Oracle9iAS instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. Please check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    *     permissions on files
    *     file contention issues on Windows NT
    *     EMD and dcmctl running concurrently
    *     internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
         at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    ERROR: Caught exception during deploy.
    Stopping OC4J instance 'OC4J_Demos'...done.
    Starting OC4J instance 'home'...done.
    Deploying application 'BC4J' to OC4J instance 'home'...
    ERROR: Caught exception during deploy.
    Stopping OC4J instance 'home'...oracle.ias.sysmgmt.exception.TaskException: The configuration files for this Oracle9iAS instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. Please check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    *     permissions on files
    *     file contention issues on Windows NT
    *     EMD and dcmctl running concurrently
    *     internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
         at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    done.
    Starting OC4J instance 'OC4J_DAS'...done.
    Deploying application 'oiddas' to OC4J instance 'OC4J_DAS'...
    ERROR: Caught exception during deploy.
    Stopping OC4J instance 'OC4J_DAS'...oracle.ias.sysmgmt.exception.TaskException: The configuration files for this Oracle9iAS instance are inconsistent with the
    configuration stored in the repository. In order to protect the repository,
    no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. Please check the logs located at
    ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
    the configuration files on disk. Some possible causes are:
    *     permissions on files
    *     file contention issues on Windows NT
    *     EMD and dcmctl running concurrently
    *     internal Oracle error
    After resolving the problem that prevented DCM from updating the configuration
    files, you may use the dcmctl resyncInstance command to resolve the problem.
    Alternatively, you can stop and then restart the active dcmctl or EMD
    process and resyncInstance will automatically be performed.
         at oracle.ias.sysmgmt.task.TaskMaster.evaluate(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deployCommon(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.ApplicationDeployment.deploy(Unknown Source)
         at oracle.ias.sysmgmt.deployment.j2ee.console.EarDeployerImpl.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    done.
    DCM Terminated.
    if I see the ORACLE_HOME/DCM/LOGS, it like below.
    DCMCTL_LOG:
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2004-03-16T17:06:11.854+08:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>iAS_dcm</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>n/a</MSG_GROUP>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>demo</HOST_ID>
    <HOST_NWADDR>128.10.4.22</HOST_NWADDR>
    <MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
    <PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
    <USER_ID>Administrator</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>[ RM ] Exception in repository API getDBConnect()</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[oracle.ias.repository.schema.SchemaException: Unable to
         connect to Directory Server:javax.naming.CommunicationException:
         DEMO.PENTASOFT.COM.MY:4032 [Root exception is java.net.ConnectException:
         Connection refused: connect]
         at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:104)
         at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:330)
         at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:415)
         at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:197)
         at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDBConnect(Unknown Source)
         at oracle.ias.sysmgmt.persistence.PersistenceManager.getSeedInfo(Unknown Source)
         at oracle.ias.sysmgmt.persistence.PersistenceManager.isDBConfigured(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.initRepository(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    EMD_LOGS:
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2004-03-16T17:24:22.382+08:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>OC4J</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>n/a</MSG_GROUP>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>demo</HOST_ID>
    <HOST_NWADDR>128.10.4.22</HOST_NWADDR>
    <MODULE_ID>iAS_dcm/oracle/defaultLogger/ExceptionLogger</MODULE_ID>
    <PROCESS_ID>null-Thread[Orion Launcher,5,main]</PROCESS_ID>
    <USER_ID>SYSTEM</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>[TM] Config/LoadEdit/ImportExport Adapter resync error</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[oracle.ias.sysmgmt.repository.plugin.orionp.exceptions.SMIOC4JMissMatchedStructureException: OC4J Instance OC4J_demos does not exist in the current iAS instance, unable to save its configuration.
         at oracle.ias.sysmgmt.repository.plugin.orionp.PlugInImpl._saveChanges(Unknown Source)
         at oracle.ias.sysmgmt.repository.plugin.orionp.PlugInImpl.resyncConf(Unknown Source)
         at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromPersistence(Unknown Source)
         at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromPersistence(Unknown Source)
         at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.syncUp(Unknown Source)
         at oracle.ias.sysmgmt.task.ConfigAdapter.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
         at oracle.sysman.emSDK.eml.util.iAS.IASEntryPoint.initialize(IASEntryPoint.java:98)
         at oracle.sysman.emSDK.eml.svlt.NavCfgHandler.startElement(NavCfgHandler.java:220)
         at org.xml.sax.helpers.ParserAdapter.startElement(ParserAdapter.java:580)
         at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:166)
         at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1082)
         at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:287)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:254)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:141)
         at org.xml.sax.helpers.ParserAdapter.parse(ParserAdapter.java:430)
         at oracle.sysman.emSDK.eml.svlt.EMServlet.init(EMServlet.java:332)
         at oracle.sysman.eml.app.ConsoleSN.init(ConsoleSN.java:87)
         at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:1687)
         at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4020)
         at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4119)
         at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:579)
         at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:376)
         at com.evermind.server.Application.getHttpApplication(Application.java:657)
         at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:663)
         at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:524)
         at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:230)
         at com.evermind.server.http.HttpServer.setSites(HttpServer.java:244)
         at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:147)
         at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:1818)
         at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1154)
         at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:70)
         at java.lang.Thread.run(Thread.java:484)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:49)
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    Please suggest me what to do and how to rectify. Can we work with forms without this component. I am getting the same component failure when I install 9IAS option on infrastructure.
    With best regards and Thanks
    Varma.

    Hi,
    Thank you for the information. I installed 3 times but still the same problem persists. Apache is working fine. Hosts file also configured with the same system IP. Is this component important for executing 9i forms and reports. Is there any way to install this component alone.
    Can u suggest any good document about installation and configuration of Oracle 9i application for a layman in Oracle 9iAS. if you have any documents can u send them to [email protected]
    Waiting for your replay....
    With best regards
    Varma.

  • OID Configuration Assistant failure on 2000 Server

    Hello,
    Has anyone experienced problems with the OID Configuration Assistant step during iAS10g install on a Windows 2000 Server? The same steps that work fine on a 2kWS fail on this machine.
    oidca.log:
    -> LOADING: d:\oracle\10gInfra\ldap\schema\oid\oidDefaultSubscriberConfig.sbs
    -> LOADING: d:\oracle\10gInfra\ldap\schema\oid\oidSubscriberCreateJAZN.sbs
    Creating DIP profiles..
    Register OID Database..
    Updating orcladmin and dipadmin password..
    Setting superuser credentials..
    Adding OID target to targets.xml..
    Stopping OID Server..
    Stopping OID Monitor..
    Starting OID Server using OPMN..
    Wed Jun 23 08:55:00 EEST 2004 Bind request issued. Waiting for OID Server response.
    Wed Jun 23 08:55:35 EEST 2004 Bind request issued. Waiting for OID Server response.
    javax.naming.CommunicationException: <HOSTNAME>:389 [Root exception is java.net.ConnectException: Connection refused: connect]
    For some strange reason the OID cannot start up (Cannot connect to database error if I try to start it manually). I have no problems connecting to the DB using SQL plus and the tnsnames.ora from the infra home. Getting desperate...
    Thankful for assistance,
    - Nik

    So the OIDCA couldn't see that the DB was running?
    Did you install OID on a different server than the
    DB? I am having the "OID could not be started",
    error and can't seem figure it out. No, the DB wasn't running at all.
    There was something else fish about the server configuration. I tried doing another clean install on another machine and it worked fine so this is not a general thing with 2000 server. I am still trying to compare all network settings etc. that might have been different between the two machines.

  • OPMN Configuration Assistant Failed - During Midtier Installation

    I'll try to make this short and sweet.
    2 Boxes both running SLES9 Latest OCS Release (10.1.1.0.2 Sep 27).
    By the book install. Have met all pre-install reqs.
    Infra box installed okay. Very vanilla install except I opted for port ranges: web 7777, SSL 4443 etc.
    Second Box , Midtier.(Apps Install) Trying to get a very vanilla install as well. Did not opt for port changes, took the defaults.
    After about 40 minutes of the OPMN Config Assistant trying to start Webcache
    and Wireless Notification engine, the installer finally times out and fails.
    Logs indicate the following:
    Webcache log -- ...Failed to assign port 80: permission denied...server could not initalize
    OPMN/wireless_notif_eng_1003 log --Panama server notif..eng..1003 failed to initalize
    ipm.log -- Process Crashed: OC4J~OC4J_imeeting~default_island~ Restarting
    Even getting some indication of sql*net listener for email on port 25 failing because of permissions.
    I was under the impression that the installation user id had rights to make high level changes. (I did get the prompt to run the root.sh)
    I have the Metalink guys on this as well and its got them digging a bit deeper.
    Does anyone have any ideas? What am I missing here?
    Thanks in advance!
    Paul

    The Infra box install did give me a problem when I left the port selections to default (I did not use a portlist) i.e http=80, https=443, ldap 389, sldap 636. It refused to finish the install because it did not have rights to assign services to ports below 1024.
    I thought that the Root.sh script took care of that issue (which has been confirmed by the Metalink folks) So I went with what some of the examples in the install guide had and used 7777 for http, 4443 for https, 3060 for ldap and 3131 for sldap. The Infra box then installed without a hitch.
    I have met or exceed the hardware requirements for both boxes and have followed every detail regarding OS configs prior to install.
    I am running into the same issue when installing the Apps box. Trying to take the defaults, no portlist file, just a plain default install.
    I have double checked that no other services are running on these new boxes as I installed the OS with no bells or whistles. Very plain setup in other words.
    My last chat with the Metalink guys seem to think there is a permissions issue and that SLES9 is not playing nice when executing the root.sh. script.
    I am really flustered. Any ideas?

  • OC4J instance configuration assistant Failure

    During installation of both infrastructure and oracle collaboration suite on a windows 2k3 machine. I receive this error message during install and configuration:
    OC4J instance 'OC4J_SECURITY': Adding Environment variable 'DISPLAY' with value 'richsw113.us.mysite.com:0.0'
    Adding web-app 'ui.war' for app 'oiddas'.
    Ignoring jvm command-line option '-Xmx512m'. Larger heap already specified with '-Xmx512m'
    Initializing DCM..done.
    Creating OC4J instance 'OC4J_SECURITY' (protected)..done.
    ERROR: Create failed.
    Error message returned is: Instance: ocsinfra.richsw113.us.mysite.com Message: See base exception for details.See base exception for details.
    Terminating DCM..done.
    Copying C:\product\10.1.2\ocs_1\infra/j2ee/deploy.ini to C:\product\10.1.2\ocs_1\infra/j2ee/deploy.ini.1178196416875.bak.
    Writing any undeployed entries back to C:\product\10.1.2\ocs_1\infra/j2ee/deploy.ini.
    Oc4jDeploy tool completed, but with errors.
    Configuration assistant "OC4J Instance Configuration Assistant" failed
    Does anyone have any ideas as to why I'm recieving this error?

    This is an RDBMS related forum, so this thread will not have too much echo here, I suggest you to post it at the Fusion Middleware / OC4J J2EE forum.
    Any way, as a first approach, by following the requirements stated at the installation manual you should be able to install the OC4J instance without tampering with this specific variables.
    As a good advice, specify the OS you are trying to install to and the product versions.
    Why do you mention the DISPLAY environment and then you post Windows paths?

  • Oracle (9i) Database Configuration Assistant Failure

    G'day people,
    Got a bit of a problem....
    After tussling and finally getting CONNECT / as SYSDBA to work,
    (SQLNET.ORA:SQL_NET.AUTHENTICATION = (NTS) helps heaps, it
    finally gets past the assistant wizard screen for changing the
    configuration of an existing database... However, during the
    actual execution of the sqlplus session to execute the changes,
    the session fails, an anonymous java dialog with a note comes up
    and no information is displayed or logged. (All I wanted to do
    was register the database in an Oracle Internet Directory LDAP
    server) (oh and deploy the sample schemas for my evaluation of
    9i :).
    Has anyone else hit this problem? Could anyone tell me how to do
    the two processes outlined above manually?
    Thanks muchly,
    Lachlan Pitts

    Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.

  • OPMN Configuration Assistant - start HTTP Server failed

    Help!! This is the 7th time I saw this message.
    My situation is:
    1. Installing Oracle 10g on infrastructure option
    2. My OS is Windows XP pro
    3. I installed apache triad and apache HTTP server previously, but before installation I have removed.
    4. I have followed the manual deinstallation in oracle 10g release doc before reinstallation.
    Trying:
    1.When I executed command in dos
    opmnctl verbose startproc ias-component=HTTP_Serverand it show the following message
    <?xml version='1.0' encoding='US-ASCII'?>
    <response>
    <opmn id="danaPC:6200" http-status="204" http-response="0 of 1 processes started
    .">
    <ias-instance id="infra.danapc">
    <ias-component id="HTTP_Server">
    <process-type id="HTTP_Server">
    <process-set id="HTTP_Server">
    <process id="1269235724" pid="2636" status="Init" index="1" log="C:\Or
    acle\infra\opmn\logs\HTTP_Server~1" operation="request" result="failure">
    <msg code="-21" text="failed to start a managed process after the ma
    ximum retry limit">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    </ias-instance>
    </opmn>
    </response>
    2. The log file in opmn\logs\HTTP_SERVER~1 show
    [warn] pid file c:/oracle/infra/apache/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
    ap_spawn_child: Bad file descriptor
    Couldn't fork child for piped log process
    Hope we can come over thsi difficulty and give others the best solutions. Thanks

    It was detailed on Metalink:
    Subject:      Oracle9iAS 9.0.2.x HTTP Server Fails To Start When RotateLogs Is Used On Windows 2000
         Doc ID:      Note:225592.1      Type:      PROBLEM
         Last Revision Date:      05-MAR-2004      Status:      PUBLISHED
    Oracle9iAS 9.0.2.x HTTP Server Fails To Start When RotateLogs Is Used On Windows 2000
    * fact: Oracle HTTP Server Powered by Apache
    * fact: Oracle 9i Application Server Enterprise Edition 9.0.2
    * fact: MS Windows 2000
    * symptom: Trying to use Rotate Log
    * symptom: ORACLE_HOME/Apache/Apache/conf/httpd.conf contains the following:
    * symptom: TransferLog "|rotatelogs $ ORACLE_HOME/Apache/Apache/logs/access_log 86400"
    * symptom: EM website fails to start HTTP Server with errors:
    * symptom: Oracle.sysman.emSDK.util.jdk.EMException: Timeout has been reached
    * symptom: Oracle.sysman.emSDK.util.jdk.EMException: The opmn request has failed.
    * symptom: From opmn: HTTP/1.1 400 Bad request Content-Length: 0 Content-Type: text/html Response: No processes matched the request.
    * symptom: Check opmn log files such as ipm.log and ons.log for detailed.
    * symptom: Starting HTTP Server from dcmctl gives error:
    * symptom: ADMN-906025 The exception 806212 occurred
    * symptom: Error in HTTP Server.1 log file:
    * symptom: [error] (9)Bad file descriptor: dup2(stdin) failed ap_spawn_child: Bad file descriptor Couldn't fork child for piped log process
    * cause: Bug 2438924 ONE OF APACHE PROCESSES WHICH USES ROTATELOGS.EXE CANNOT BE STARTED
    fix:
    1. Take a backup of $ORACLE_HOME\opmn\conf\opmn.xml
    2. Edit Insert $ORACLE_HOME\opmn\conf\opmn.xml
    3. Change line:
    <ohs gid="HTTP Server"/>
    to:
    <ohs gid="HTTP Server">
    <environment>
    <prop name="ComSpec" value="C:\WINNT\system32\cmd.exe"/>
    </environment>
    </ohs>
    4. Shutdown iAS completely and then restart iAS and HTTP Server starts.

  • Oracle Application Server 10.1.3.0.0 OPMN Configuration Assistant Fails Due

    I'm in the process of installing Oracle E-Business Suite 12.1 on RHEL.
    This is where I'm stuck at: having trouble starting OPMN.
    While looking up Metalink, I found Doc ID:ID 422562.1 close to solving my issue.However I'm not sure how to use the solution.
    Here's the solution:
    1. Install the 32-bit version of glibc-devel-2.3.4-2.19.i686.rpm.
    Where can I download this file and any steps to install it would be great?
    Note: To install 32-bit packages on a 64-bit system, you may need to use the force option and the nodeps option of the rpm utility.
    2. The glibc-devel-2.3.4-2.19.i686.rpm installs the crt1.o into /usr/lib; confirm that this file now exists:
    cd /usr/lib
    ls -l crt1.o
    3. Deinstall this failed installation.
    Do I have to deinstall the entire EBS install or just the Oracle AS 10.1.3?
    4. Remove contents of /tmp and /var/tmp.
    5. Reinstall Oracle Application Server 10.1.3.0.0
    How can I reinstall just the Oracle AS 10.1.3?
    Please help.

    I kindly advice you to move this thread to "Application Server" section of this forum...

  • OC4J Instance Configuration Assistant Installation Failure

    I am using Redhat Linux Advanced Server 2.1 and trying to install Oracle 9i Application Server R2 (9.0.2.0.1). While installation of OC4J Instance Configuration Assistant
    component, I found following errors. I need to know solution for same.
    OC4J Instance Configuration Assistant
    Reading ini file - '/ora9isoft/oas/OH2/j2ee/deploy.ini'
    OC4J instance 'OC4J_Demos': Adding property 'jbo.server.in_oc4j=true'
    OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB'
    OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB'
    OC4J instance 'OC4J_Demos': Adding OC4J command line option '-userThreads'
    OC4J instance 'OC4J_Demos': Adding java command line option '-Xmx512M'
    OC4J instance 'OC4J_Demos': Adding property 'oracle.path=%PATH%'
    OC4J instance 'OC4J_Demos': Adding property 'oracle.display=:0.0'
    OC4J instance 'OC4J_Demos': Adding Environment variable '%LIB_PATH_ENV%' with value '%LIB_PATH_VALUE%'
    OC4J instance 'OC4J_Demos': Property 'jbo.server.in_oc4j' already exists with value 'true'
    OC4J instance 'home': Adding property 'jbo.server.in_oc4j=true'
    Initializing DCM...done.
    OC4J instance 'home' already exists.
    Creating OC4J instance 'OC4J_Demos'...done.
    ERROR: Create failed.
    Error message returned is: Instance: as1.dholka.wbtea.com Message: See base exception for details.
    Base Exception:
    oracle.ias.sysmgmt.exception.TaskException:Starting opmn process times out.See base exception for details.
    Starting OC4J instance 'home'...
    ERROR: Start failed.
    Error message returned is: Unable to establish a connection to opmn process.
    Base Exception:
    java.net.UnknownHostException:localhostCheck port, host, or reply message if any
    DCM Terminated.
    Also, for installation of OPMN Configuration Assistant, following error has occured :
    opmnctl: starting opmn and all managed processes...
    /ora9isoft/oas/OH2/opmn/bin/opmnctl: line 2: 20717 Segmentation fault $OPMNADMIN ping
    /ora9isoft/oas/OH2/opmn/bin/opmnctl: line 8: 20722 Segmentation fault $OPMNADMIN pingwait
    opmnctl: opmn start failed
    ---

    niravashah,
    As for the actual error, I suggest you check your ethernet network adapter setup, look for conflicting hostnames - IPs ..
    hope it helps
    RB

  • Oracle 10g Installation: JVM Crashes in Net Configuration Assistant

    Hi,
    I'm trying to install Oracle 10g (10.2.0.1) in Windows 2003 server, Installation goes fine, JVM crashes at the time of configuring, "Network Conf Assistant", Can any one help me out here.... Have given the JVM dump for your reference...
    Thanks in Advance....
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x626DB080
    Function=Java_oracle_net_common_jlsnrctl_executeCommand+0x9150
    Library=E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
    Current Java thread:
         at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
         at oracle.net.ca.ConfigureProfile.typicalConfigure(Unknown Source)
         at oracle.net.ca.NetCA.typicalConfigureServer(Unknown Source)
         at oracle.net.ca.NetCA.<init>(Unknown Source)
         at oracle.net.ca.NetCA.main(Unknown Source)
    Dynamic libraries:
    0x00400000 - 0x0040B000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.exe
    0x7C800000 - 0x7C8C0000      E:\WINDOWS\system32\ntdll.dll
    0x77E40000 - 0x77F42000      E:\WINDOWS\system32\kernel32.dll
    0x77F50000 - 0x77FEC000      E:\WINDOWS\system32\ADVAPI32.dll
    0x77C50000 - 0x77CEF000      E:\WINDOWS\system32\RPCRT4.dll
    0x77BA0000 - 0x77BFA000      E:\WINDOWS\system32\MSVCRT.dll
    0x08000000 - 0x08138000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\client\jvm.dll
    0x77380000 - 0x77412000      E:\WINDOWS\system32\USER32.dll
    0x77C00000 - 0x77C48000      E:\WINDOWS\system32\GDI32.dll
    0x76AA0000 - 0x76ACD000      E:\WINDOWS\system32\WINMM.dll
    0x71BC0000 - 0x71BC8000      E:\WINDOWS\system32\rdpsnd.dll
    0x771F0000 - 0x77201000      E:\WINDOWS\system32\WINSTA.dll
    0x71C40000 - 0x71C98000      E:\WINDOWS\system32\NETAPI32.dll
    0x76B70000 - 0x76B7B000      E:\WINDOWS\system32\PSAPI.DLL
    0x10000000 - 0x10007000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\hpi.dll
    0x76F50000 - 0x76F63000      E:\WINDOWS\system32\Secur32.dll
    0x00380000 - 0x0038E000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\verify.dll
    0x00390000 - 0x003A9000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.dll
    0x003C0000 - 0x003CE000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\zip.dll
    0x03270000 - 0x03382000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\awt.dll
    0x73070000 - 0x73097000      E:\WINDOWS\system32\WINSPOOL.DRV
    0x76290000 - 0x762AD000      E:\WINDOWS\system32\IMM32.dll
    0x77670000 - 0x777A4000      E:\WINDOWS\system32\ole32.dll
    0x03490000 - 0x034E1000      E:\oracle\product\10.2.0\db_1\jdk\jre\bin\fontmanager.dll
    0x626D0000 - 0x626E5000      E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
    0x62740000 - 0x6277D000      E:\oracle\product\10.2.0\db_1\bin\oranl10.dll
    0x60960000 - 0x60A6D000      E:\oracle\product\10.2.0\db_1\bin\oran10.dll
    0x62670000 - 0x6268B000      E:\oracle\product\10.2.0\db_1\bin\orancrypt10.dll
    0x60870000 - 0x60953000      E:\oracle\product\10.2.0\db_1\bin\oracore10.dll
    0x60A80000 - 0x60B44000      E:\oracle\product\10.2.0\db_1\bin\oranls10.dll
    0x63690000 - 0x636A8000      E:\oracle\product\10.2.0\db_1\bin\oraunls10.dll
    0x7C340000 - 0x7C396000      E:\WINDOWS\system32\MSVCR71.dll
    0x60EB0000 - 0x60EB7000      E:\oracle\product\10.2.0\db_1\bin\orauts.dll
    0x71C00000 - 0x71C17000      E:\WINDOWS\system32\WS2_32.dll
    0x71BF0000 - 0x71BF8000      E:\WINDOWS\system32\WS2HELP.dll
    0x62920000 - 0x6296C000      E:\oracle\product\10.2.0\db_1\bin\oranro10.dll
    0x62530000 - 0x62583000      E:\oracle\product\10.2.0\db_1\bin\oraldapclnt10.dll
    0x627F0000 - 0x628F9000      E:\oracle\product\10.2.0\db_1\bin\orannzsbb10.dll
    0x60300000 - 0x60857000      E:\oracle\product\10.2.0\db_1\bin\orageneric10.dll
    0x63430000 - 0x63457000      E:\oracle\product\10.2.0\db_1\bin\orasnls10.dll
    0x60FA0000 - 0x61092000      E:\oracle\product\10.2.0\db_1\bin\oracommon10.dll
    0x61C20000 - 0x61E72000      E:\oracle\product\10.2.0\db_1\bin\oraclient10.dll
    0x636B0000 - 0x636B6000      E:\oracle\product\10.2.0\db_1\bin\oravsn10.dll
    0x60B50000 - 0x60EA8000      E:\oracle\product\10.2.0\db_1\bin\orapls10.dll
    0x034F0000 - 0x034F9000      E:\oracle\product\10.2.0\db_1\bin\oraslax10.dll
    0x63080000 - 0x63284000      E:\oracle\product\10.2.0\db_1\bin\oraplp10.dll
    0x03500000 - 0x0359A000      E:\oracle\product\10.2.0\db_1\bin\orasql10.dll
    0x035A0000 - 0x03700000      E:\oracle\product\10.2.0\db_1\bin\oraxml10.dll
    0x60020000 - 0x60030000      E:\WINDOWS\system32\MSVCIRT.dll
    0x62980000 - 0x62990000      E:\oracle\product\10.2.0\db_1\bin\orantcp10.dll
    0x61ED0000 - 0x61F5B000      E:\oracle\product\10.2.0\db_1\bin\orahasgen10.dll
    0x62AB0000 - 0x62B1A000      E:\oracle\product\10.2.0\db_1\bin\oraocr10.dll
    0x62B20000 - 0x62B60000      E:\oracle\product\10.2.0\db_1\bin\oraocrb10.dll
    0x71BB0000 - 0x71BB9000      E:\WINDOWS\system32\WSOCK32.dll
    0x62790000 - 0x627A7000      E:\oracle\product\10.2.0\db_1\bin\oranldap10.dll
    0x77D00000 - 0x77D8C000      E:\WINDOWS\system32\OLEAUT32.dll
    0x626B0000 - 0x626B7000      E:\oracle\product\10.2.0\db_1\bin\oranhost10.dll
    0x62660000 - 0x62666000      E:\oracle\product\10.2.0\db_1\bin\orancds10.dll
    0x629C0000 - 0x629C8000      E:\oracle\product\10.2.0\db_1\bin\orantns10.dll
    0x03860000 - 0x03868000      E:\oracle\product\10.2.0\db_1\BIN\orawsec10.dll
    0x635D0000 - 0x635E9000      E:\oracle\product\10.2.0\db_1\BIN\orasrvm10.dll
    0x77B90000 - 0x77B98000      E:\WINDOWS\system32\VERSION.dll
    0x62590000 - 0x625DE000      E:\oracle\product\10.2.0\db_1\BIN\oraldapjclnt10.dll
    0x76C10000 - 0x76C39000      E:\WINDOWS\system32\imagehlp.dll
    0x6D580000 - 0x6D628000      E:\WINDOWS\system32\dbghelp.dll
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 567K [0x10010000, 0x100b0000, 0x104f0000)
    eden space 512K, 99% used [0x10010000, 0x1008fa20, 0x10090000)
    from space 64K, 88% used [0x100a0000, 0x100ae298, 0x100b0000)
    to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
    tenured generation total 1408K, used 628K [0x104f0000, 0x10650000, 0x14010000)
    the space 1408K, 44% used [0x104f0000, 0x1058d398, 0x1058d400, 0x10650000)
    compacting perm gen total 5120K, used 4967K [0x14010000, 0x14510000, 0x18010000)
    the space 5120K, 97% used [0x14010000, 0x144e9eb0, 0x144ea000, 0x14510000)
    Local Time = Sun Oct 16 09:26:38 2005
    Elapsed Time = 4
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
    # An error report file has been saved as hs_err_pid2820.log.
    # Please refer to the file for further information.
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "E:\oracle\product\10.2.0\db_1\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------

    No Srini,
    I opted to create a starter database as part of the installation.
    The error occurs "during installation" while trying to do the database configurations.
    (I did try once without installing and configuring the Loopback adapter (With and without plugging into the network).
    Later I read some of the problems with DHCP and installed/configured the Loopback adapter.
    Then tried Installing Oracle 11gR2 (With and without plugging into the network)
    But end up getting stuck at the same Net Configuration Assistant failure).
    Any advise ?
    By the way, thanks for the support.
    San.

  • Oracle 11gR2 Installation on Win7 Pro (Net Configuration Assistant failed)

    Hi Guys,
    I am trying to install Oracle 11gR2 on a new Window7 Professional Laptop.
    I get the error "[INS-20802] Oracle Net Configuration Assistant failed." at time of Oracle Database configuration.
    Log files says
    INFO: Oracle Net Services Configuration:
    INFO: ProfileException: Could not create Profile: TNS-04414: File error
    INFO: Error: null
    INFO: Check the trace file for details: C:\Oracle11g\app\cfgtoollogs\netca\trace_OraDb11g_home1-1109052PM2614.log
    And The above Logfile have
    [main] [ 2011-09-05 14:26:15.963 SGT ] [ConfigureProfile.setProfileParam:136] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
    java.lang.NullPointerException
         at oracle.net.ca.ConfigureProfile.setProfileParam(ConfigureProfile.java:137)
         at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(ConfigureProfile.java:80)
         at oracle.net.ca.InitialSetup.setupConfigObjects(NetCA.java:4442)
         at oracle.net.ca.InitialSetup.<init>(NetCA.java:4080)
         at oracle.net.ca.NetCA.main(NetCA.java:409)
    I did read through the DHCP issues and installed the Loopback adaptor and configured the "Oracle_HostName" system variable.
    I tried both plugging in/out the network cable (If Plugged in my laptop is connected to a work group).
    Anyhelp ASAP is appreciated.

    No Srini,
    I opted to create a starter database as part of the installation.
    The error occurs "during installation" while trying to do the database configurations.
    (I did try once without installing and configuring the Loopback adapter (With and without plugging into the network).
    Later I read some of the problems with DHCP and installed/configured the Loopback adapter.
    Then tried Installing Oracle 11gR2 (With and without plugging into the network)
    But end up getting stuck at the same Net Configuration Assistant failure).
    Any advise ?
    By the way, thanks for the support.
    San.

  • Internet Directory Configuration Assistant fails

    I have installed 10g Infrastructure, but when the Internet Directory Configuration Assistant runs, it fails with the following error:
    Output generated from configuration assistant "Internet Directory Configuration Assistant":
    389
    636
    cn=orcladmin
    asdb
    infra904.superfatpc
    Error occured during the previous operation. Please see the log files.oracle.ldap.oidinstall.backend.OIDCAException: The following port is not free :389
    Configuration assistant "Internet Directory Configuration Assistant" failed
    The ports 389 and 636 are surely free (no process holds them).
    Even though the OIDCA fails, I still can log in the directory at port 389. (There's no entry in the directory at all)
    In the release notes for version 9.0.4 of OracleAS, there's a section titled:
    Configuration Assistant Failure on Computer without Appended Domain Name.
    This is actually my case since my computer do not have the domain name appended, it's just a standardlone computer.
    Oracle also exposes the solutions to workarround this issue, but it couldn't help me because my tnsnames.ora and sqlnet.ora are already correct.
    If any one has experience with this problem before, please help me!
    My computer:
    P4 2.8GHz, socket 775, 1G RAM
    OS: Windows Server 2003
    OracleAS 9.0.4

    Did the installer pre-check return any warnings? can you connect to the OID backend DB. e.g. via sqlplus? Basically this looks like a TAR you should open at metalink.
    regards,
    --Olaf                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for

  • Unable to call c++ .so file in java

    this is my java file prog1.java class prog1      static           try                System.loadLibrary("test");           catch(UnsatisfiedLinkError ule)                System.out.println(ule);                //ule.printStackTrace();      public sta

  • HT204266 how do I create an app?

    I want to create an app, so where do I get started?

  • Is there a way to search the app store by OS?

    My daughter still has an ipod touch 2g and with all the versions of operating software out now it is harder to find apps that will still work on her device without looking at details for every app. I would love a way to search by OS.  I do keep her s

  • Macro media dream weaver - table function

    Macro media dreamweaver mx 6 - Table function stopped working, Why?

  • Forcing char to be unsigned

    I am looking for a way to tell the compiler to handle all char as unsigned char. We are porting a lot of sources, and in all or other compiler we use a flag to have all characters treated as unsigned char. In the code a lot constructions occur where