ORA-01536 Space Quota with resource and unlimited tablespace privilege

Good morning.
I've got the following error ORA-01536: space quota exceeded for tablespace, but my owner has the following grants:
- RESOURCE
- UNLIMITED TABLESPACE
The tablespace transaction has allocated 150GB and when it's about 90% of space used the error occurs, but we have auto extend in all tablespaces.
My environment:
Oracle Database 10.2.0.2
RAC - ASM
Server Red Hat release 4
Best Regards,
Rafael Ceolim

jgarry wrote:
Check the ddl for all objects in the tablespace. There was a thread yesterday where an unused partitioned index had part of it's data in an offline tablespace, or something like that. You might also look at dba_segments for the objects too, in case something is just not where you expect.tanks jgarry for your reply.

Similar Messages

ORA-01536: space quota exceeded for tablespace 'SYSTEM'

Hi All,
Please help me to understand the below issue. I am trying to create a table as below. Connected as APPS user.
SQL>create table test_ts(id number) tablespace APPS_TS_TX_DATA
ORA-00604: error occurred at recursive SQL level 1
ORA-01536: space quota exceeded for tablespace 'SYSTEM'
ORA-06512: at line 2
Below are the details of the user
SQL>select * from user_ts_quotas
        where tablespace_name = 'APPS_TS_TX_DATA'
TABLESPACE_NAME     BYTES     MAX_BYTES     BLOCKS     MAX_BLOCKS
APPS_TS_TX_DATA     929038336     -1     113408     -1
SQL>select * from user_ts_quotas
        where tablespace_name = 'SYSTEM'
No Rows Returned.

Hi,
Thanks for the response. There is no QUOTA defined for SYSTEM user, so it is UNLIMITED, No?
Below are the details of "SYSTEM" tablespace. Is there any issue with this?
TABLESPACE_NAME           BLOCK_SIZE INITIAL_EXTENT       NEXT_EXTENT           MIN_EXTENTS            MAX_EXTENTS
SYSTEM                  8192               16384         16384                1                     505

DRM 11.1.13 - ORA-01536 space quota exceeded for tablespace "DRM_INDEX"

Hello,
Are there any guidelines or recommendations on how to size the index tablespace of the DRM repository? We keep running out of space, it is now set to 10GB. We have hierarchies with 100,000+ nodes in about 6 versions, several exports with queries. Is there any way to cleanup what is causing the index tablespace to grow?
Thank you,

Hi iam new to drm ,installed on my lappi,and when i try to configure,i am understanding the the pre-requisites
Oracle Database Prerequisitesl If you are using an Oracle RAC database system, you must create the tablespaces with the
appropriate RDBMS software prior to installation.
Whether the scripts are run automatically or manually, the user must be logged in as
SYSTEM. When you manually execute the database scripts, the DRM_DB user is created in
the RDBMS (if it does not already exist). The DRM_DB user is assigned a default tablespace
of DRM_DATA and must have access rights to the following items:
Default tablespace (usually DRM_DATA)
UNLIMITED TABLESPACE
CONNECT
CREATE ANY SEQUENCE
CREATE USER
ALTER USER
====================================================
When you manually execute the database scripts, the user is logged in as the schema owner
which, has a default tablespace of DRM_DATA. This user must have access rights to the
following items:
m Default tablespace (usually DRM_DATA) — this can be done after the install if the
tablespaces were not created.
UNLIMITED TABLESPACE
DBA
CONNECT
CREATE ANY SEQUENCE
CREATE USER
ALTER USER
=========================================================
according to the previous understanding of hyperion modules.this time i created a new user "DRM_DATA" under orcl DB
and provide him dba,connct,view,procedure,trigger,session roles..
and when i try to configure it then it states some error////// yur drm_data not have drm prerequisites.

1536 ORA-01536: space quota exceeded for tablespace

I am trying to update a record in the particular table.. its keep saying the above error msg.. I have extended the table space segment, but still am getting the same error.
Can some one have any idea on this..
Thanks in advance

Hi,
execute the following statement form system
SQL> alter user <username> quota unlimited on < tablespace_name> ;
this will allow you to use this tablespace.
-Mohan
<BLOCKQUOTE>quote:<HR>Originally posted by Joekan:
I am trying to update a record in the particular table.. its keep saying the above error msg.. I have extended the table space segment, but still am getting the same error.
Can some one have any idea on this..
Thanks in advance<HR></BLOCKQUOTE>
null

Unlimited Tablespace Privilege

I have one user in the database say'user1'. Let this user has only 'create session' privilge.
I have two sessions open. In one session I am connect as:
"sys/oracle as sysdba" and in other session, I am connect as : "user1/user1".
Now from "sys" session I am granting dba privilege to 'user1'. "grant dba to user1".
When I go to "user1" session and fire a command with out reconnecting :
'select * from session_privs', I see the only two privileges
1 . Create session
2. Unlimited Tablespace.
Here I understand that :
1. I need to connect again as user1/user in order to reflect the dba privilges.
2. But even if I do no connect again, why am I getting "Unlimited Tablespace " privilge.
My question is : Is there something special about this privilege or is this a bug?

This is definitely a wrinkle I wasn't aware of, and which I don't see documented.
In session 1
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.3.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.3.0 - Production
system@jcave > create user newUser identified by newUser;
User created.
system@jcave > grant create session to newUser;
Grant succeeded.
system@jcave > @connect newUser/newUser;
Connected.
newuser> select * from session_privs
2 ;
PRIVILEGE
CREATE SESSIONIn session 2
system@jcave > grant dba to newUser;
Grant succeeded.And new back in session 1
newuser> select * from session_privs;
PRIVILEGE
CREATE SESSION
UNLIMITED TABLESPACEIf I log off and log back on as newUser, I see 140 some rows in session_privs.
Justin

Business event with resources and resource type

Hi,
I am doing bdc for tcode pv10,i want to update the resource type and resource,i tried with it,i do not get idea,pls give me u r suggestions.
cheers,
karthi

Hi,
You need to click on the 'Resource Selection' button on the top left hand corner of the create event screen.
If you do not see any resources there, it means you have not added resources to your event type. Go to PP01, and create relationship A022 (requires resource type).
For rooms and materials, this is fine. For instructors, you need to create relationship A026 (is held by) also.
Regards,
Neha
PS:Reward if helpful

ORA-29532: It Works with JDeveloper and fails under Database

Hello,
We have a web service client. It works fine under JDeveloper but when we upload it to the database and we excute a procedure calling it.
Exception message
"ORA-29532: llamada Java terminada por una excepciÃ³n Java no resuelta: java.lang.Error: HTTPClient Internal Error: could not create instance of HTTPClient.RetryModule -
java.lang.IllegalAccessException: The constructor HTTPClient/RetryModule is private"
We use a procedure to call this simple java web service client. The code is:
[Procedure CODE]
as
num number;
begin
num:=wssuma(4,6);
DBMS_OUTPUT.PUT_LINE(num);
end;
The JDeveloper version is: 9.0.2.822 and the database one is: 9.2.0.5.
Can anybody help us? We're newbies and this error is breaking the project.
Thanks in advance

It means the httpclient your client expects is not compatibl e with the one inside the database. What is your database version? If your database is 9i, you can generate and load webservice clients using the databse webservices callout utility posted at
http://www.oracle.com/technology/sample_code/tech/java/jsp/dbwebservices.html

Reconciliation with resource and delegation

Hi All,
I have developed a java class that is working fine for the delegation purpose means as per the inputs, it sets the delegatee for that user for a particular interval.
Now my requirement is that when I reconcile OIM against a resource, suppose AD, then the value set as delegatee in AD should also be reconciled properly and also if there is any change in delegatee it should be reflected in OIM also. I think this is possible, if at the time of reconciliation I can call the java class developed for delegation. But I am not getting how it can be done on the event of changing a particular attribute? If there is any other way for doing the same, then please suggest.
Besides this, in OIM form we have location and department fields. is it possible to modify it so that the location field is a drop down list and on the basis of the value selected in location, department is populated.
Please put your points over here. It will be really helpful to me.
Thanks
Gaurav

Adding resources to tasks may not adjust duration if the task is not effort driven or if the task is fixed duration.
When you initially assign the resource at a lower assignment unit, Project calculates the work for the resource based upon Assignment Units * Task Duration.
If after you have assigned the resource (your second scenario), you drop the assignment units, Project will, by default, not recalculate the work. It will assume you wish the resource to work fewer hours per day (lower assignment unit) on the same
amount of work. So, duration is adjusted (increased) if you drop assignment units.
See: http://office.microsoft.com/en-us/project-help/change-the-task-type-project-uses-to-calculate-task-duration-HP010092039.aspx
It applies even though the article is for 2007.
For additional information see:
http://office.microsoft.com/en-us/training/using-task-types-RZ001077906.aspx?section=6
And certainly, feel free to post back with additional questions.

Need figure for Hard Drive Space saved with FCS and LS installed

Hello (this is my first post!)
Have a quick question... I am planning a purchase of a 17" MBP in the very near future, and am trying to get a total GB required for my HD with the software I will be using. Basically, if the total is low enough, I can get an SSD!
So here is my quandary. If I were to install Final Cut Studio and Logic Studio on a MBP, there is overlap in Compressor and Soundtrack Pro, and in all (?) of the audio content. If I understand the tech spec breakdown correctly, that means at least 22 GB (from the audio content breakout) of the installation is duplicate. Does anyone know the total GB (for the programs and content) that would be duplicate? I am looking for how much HD space that would be saved in this scenario. This will help me out tremendously in planning my purchase.
Thanks!
Dave
PS - BTW, I am aware some folks install all of the content on a separate external disk. While I have read up on the Pros/Cons, I figure that if I were to have an SSD large enough, it would be excellent to not have to plug in an external HD since the internal speed should suffice...

If you can, aim for a 256GB SSD, which will hold your core programs and have overhead for content (should you choose to store it there) and future expansion/growth.
If it's a 2011 machine, then start eyeballing external drives sporting the ThunderBolt interface, which is RIDICULOUSLY fast. A bunch of products are likely to be announced at this week's National Association of Broadcasters show, and will begin shipping in the days/weeks to come. The external drive should have no problem offering you capacity and performance that you'd need for your work. I have to admit, I'm a little envious - the new 'sandy bridge' MacBook Pro with that ATI chip and the new interface look really fantastic, it's an incredible amount of power to have on the go.
Good luck!

Working with Resources, and JARs

I am writing a program that opens images, displays them, moves them, ect.
I need to know how to get access to a Image from a resource that will still work in a JAR.
Right now to open Images I do this:
File file = new File(szPath);
return (Image)ImageIO.read(file);
This approach works great until I go to a JAR file.
How do I fix this issue?

Suppose the jar file looked like this:
manifest --(with Main-Class: mypackage.Foo)--\\ mypackage\\ Foo.class\\ res\\ image.pngThen the Foo class can access the image with:
Image im = imageIO.read(getClass().getResource("/res/image.png"));The first / in the string argument to getResource() means "ignore where the Foo class is and just locate this image from the 'top' of the classpath". This (with a leading /) is the easiest to understand initially.
(One gotcha on Windows is that iMaGe.png and image.png will function interchangeably as Files but not as jar archive entries. So check the file names before you create the jar.)
If you still have problems, post a SSCCE.
http://homepage1.nifty.com/algafield/sscce.html
Edited by: pbrockway2 on Jan 17, 2008 2:17 PM
Doesn't matter what the main class is (or whether there is one.)

RDF ORA-05136 error space quota exceeded for tablespace

Hi,
I'm having a hard time finding the root cause of this error. My users have unlimited space and the tablespace has a starting 10gb space and expands with 1gb increments. This happens when I try to insert an array of triples where the objects are clobs.

Hi User,
Direct From the Manual,
ORA-01536: space quota exceeded for tablespace 'string'.
Cause: The space quota for the segment owner in the tablespace has been exhausted and the operation
attempted the creation of a new segment extent in the tablespace.
Action: Either drop unnecessary objects in the tablespace to reclaim space or have a privileged
user increase the quota on this tablespace for the segment owner.

Ora - 01536 Tablespace Quota

I am getting an error
ORA - 01536 : Space Quota exceeded for tablespace 'Tablespacename';
I have tried options like
alter user <username> quota unlimited on <Tablespacename>;
Grant resource to <username>;
I am still getting the same error
Please can any one help me
Lakshmi Nar

Perhaps you are giving quota in the wrong tablespace. Can you post the complete error ?
Perhaps that user is trying to stored objects in another tablespace different than its default tablespace.
Joel Pérez

ORA-01536

two weeks ago i upgrade oracle 9i r2 to 10g r2. the database seems fine until today i received error
ORA-01536 space quota exceeded for tablespace 'xxx'
the tablespace is only 20% filled and the user for that tablespace already granted RESOURCE and UNLIMITED TABLESPACE.
do i miss something?
thank you in advance.

There may be dependent objects for the table you trying to manupulate . Try to f
Find out out dependent objects -
1 select NAME,TYPE from dba_dependencies where
REFERENCED_NAME='table name'
2. If found, find the owner of the objects.
select owner , objects_name from dba_objects where objcects = 'dependent_objects'
3 Grant unlimited quota to that user.
grant unlimited tablespace to <user> ;
hare krishna
Alok

ORA-01536 on unknown tablespace

HI All,
I am trying to create a materialized view, from a table on a remote database via a dblink.
However, I am getting an ORA-01536 error message and oracle is not telling me which tablespace is the problem. The exact error message is:
ORA-01536: space quota exceeded for tablespace ''
When I check dba_ts_quotas, I find that my username is not included, and the only tablespace mentioned is SYSAUX (for DMSYS, SYSMAN and OLAPSYS)
Any suggestion greatly appreciated.
Thanks
Gavin

This would also happen if your account earlier had the RESOURCE role granted to it but the role has since been revoked.
RESOURCE allowed you to create objects as it includes the UNLIMITED_TABLESPACE privilege.
Once that is revoked, you need explicit quotas or QUOTA UNLIMITED ON the specific tablespace(s).
Hemant K Chitale
http://hemantoracledba.blogspot.com

"UNLIMITED TABLESPACE" is revoked - don't know who did that

I got call from developer they encountered error from insert statement stating
ERROR at line 1:
ORA-01536: space quota exceeded for tablespace 'XXXXXXXX'
I went there and found that "unlimited tablespace" is revoked from that user.
I can not explain how it happened since I am the only DBA for this database. Although one of the developers has DBA privilege, I don't think he has the ability to do so. There is no reason for anybody to do so.
The database is 9.2.0.7 with 2nd Quarter CPU patch.
My question is that is there any other mechanism to make this happen? This is really strange to me.
jzc

This is most curious.
It turns out that granting resource also grants unlimited tablespace and revoking resource also revokes unlimited tablespace. However, unlimited tablespace is not a privilege granted to resource, rather it is granted to the user.
If I grant unlimited tablespace, I can see the user has it.
If I then grant resource, the user keeps unlimited tablespace -- of course.
If I revoke resource, unlimited tablespace goes away.
If I then grant resource, unlimited tablespace comes back.
resource has an interesting property in this -- at least in 10.2
SQL> create user test01 identified by test01;
User created.
SQL> grant unlimited tablespace to test01;
Grant succeeded.
SQL> @privs_all
Enter User ID: test01
                                          System Priveleges Granted to test01.
Privilege                                           Via Role?
UNLIMITED TABLESPACE                      No Admin
SQL> grant resource to test01;
Grant succeeded.
SQL> @privs_all
Enter User ID: test01
                                          System Priveleges Granted to test01.
Privilege                                           Via Role?
CREATE CLUSTER                            No Admin RESOURCE
CREATE INDEXTYPE                          No Admin RESOURCE
CREATE OPERATOR                           No Admin RESOURCE
CREATE PROCEDURE                          No Admin RESOURCE
CREATE SEQUENCE                           No Admin RESOURCE
CREATE TABLE                              No Admin RESOURCE
CREATE TRIGGER                            No Admin RESOURCE
CREATE TYPE                               No Admin RESOURCE
UNLIMITED TABLESPACE                      No Admin
SQL> revoke resource from test01;
Revoke succeeded.
SQL> @privs_all
Enter User ID: test01
SQL> grant resource to test01;
Grant succeeded.
SQL> @privs_all
Enter User ID: test01
                                          System Priveleges Granted to test01.
Privilege                                           Via Role?
CREATE CLUSTER                            No Admin RESOURCE
CREATE INDEXTYPE                          No Admin RESOURCE
CREATE OPERATOR                           No Admin RESOURCE
CREATE PROCEDURE                          No Admin RESOURCE
CREATE SEQUENCE                           No Admin RESOURCE
CREATE TABLE                              No Admin RESOURCE
CREATE TRIGGER                            No Admin RESOURCE
CREATE TYPE                               No Admin RESOURCE
UNLIMITED TABLESPACE                      No Admin

ORA-01536 Space Quota with resource and unlimited tablespace privilege

Similar Messages

Maybe you are looking for