ORA-01613: thread 2 only has 1 logs - at least 2 logs required to enable

Hello,
I have just ran through the final stage (db creation using dbca) of the RAC install on redhat AS 2.1.
At the end i was informed
"ORA-01613: thread 2 only has 1 logs - at least 2 logs required to enable"
I gave heard that to create the log for that thread can be created using
alter database add logfile thread 2......
but i am not very familiar with oracle, so any suggestions/comments would be greatly appreciated.
When i run
select inst_id, instance_number inst_no, instance_name inst_name, parallel, status, database_status db_status, active_state state, host_name host FROM gv$instance;
it tells me:
INST_ID INST_NO INST_NAME PAR STATUS DB_STATUS
STATE HOST
1 1 orcl1 YES OPEN ACTIVE
NORMAL rac2.ractest.com
-- it does not show the rac1 node. I think it should be just something like creating a new redo log for thread 2 and mounting the instance on rac1, is that correct? what are the steps i should need to fix this?
any help HUGELY appreciated,
Ireland.

For more information about RAC:
Real Application Clusters Administration Contents / Search / Index / PDF
Real Application Clusters Concepts Contents / Search / Index / PDF
Real Application Clusters Deployment and Performance Contents / Search / Index / PDF
Real Application Clusters Documentation Online Roadmap Contents / Search / /
Real Application Clusters Real Application Clusters Guard I - Concepts and Administration Contents / Search / Index / PDF
Real Application Clusters Real Applications Clusters Guard I Configuration Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, and Sun Solaris Contents / Search / Index / PDF
Real Application Clusters Setup and Configuration Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Joel P�rez

Similar Messages

My itunes gift card only has a 15 digit code but it requires 16 digits to redeem it, what do I do?

My itunes gift card only has a 15 digit code but it requires 16 digits to redeem it, what do I do?

iTunes Store: Invalid, inactive, or illegible codes

ORA-00313: open failed for members of log group 2 of thread 1

We have a 4 node 32bit linux RAC (Dell/EMC) system running 9.2.0.4. It is very stable but over the past couple of months we've encountered a few ORA-00313 errors, while the system is running.
No patterns. Different loads, times of day, nodes.
The redo can't be opened, the node crashes, we look for errors, can't find any and then restart. The file is there and the permissions are fine. No other processes are accessing the files. No other Db errors. No O/S, SAN, Fiber, errors.
All the research I've done shows that this is an error you'd only get on startup.
We're going to log a TAR, but I can't believe we're the only ones to ever see this occur.
[directory and server names have been modified to protect the system. Don't get hung up on typos or possible file system config problems too much - this system has been and is running now]
======================================================
Log entries:
Mon Oct 24 22:51:58 2005
Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
Mon Oct 24 22:51:58 2005
Errors in file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
Mon Oct 24 22:51:58 2005
LGWR: terminating instance due to error 313
Below are the contents of the trace file mentioned in the above log:
trace file /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc:
[oracle@db1 bdump]$ more /u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
/u01/app/oracle/admin/sampdb/bdump/sampdb1_lgwr_2237.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/920
System name: Linux
Node name: db1.sample.com
Release: 2.4.9-e.59enterprise
Version: #1 SMP Mon Jan 17 07:02:16 EST 2005
Machine: i686
Instance name: sampdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 24
Unix process pid: 2237, image: [email protected] (LGWR)
*** SESSION ID:(25.1) 2005-10-11 22:31:02.315
CMCLI WARNING: CMInitContext: init ctx(0xad96e80)
*** 2005-10-24 22:51:58.192
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
error 313 detected in background process
ORA-00313: open failed for members of log group 2 of thread 1
ORA-00312: online log 2 thread 1: '/sampledb/redo0/oradata/sampdb/redo/redo102.log'
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 2
ksuitm: waiting for [5] seconds before killing DIAG

The only thing I can still think of is file permissions.
If the system has recently been restored or Redo Log recreated, check the file permissions and ensure that Oracle has Read and Write Access to the Directory and Files.
At least the file permissions on the directory and files should look something like this example
$ls -l /sampledb/redo0/oradata/sampdb/
drwxr-xr-x oracle oinstall 4096 19 May 17:46 redo
$ls -l /sampledb/redo0/oradata/sampdb/redo/
-rw-r----- oracle oinstall 524288512 27 Oct 15:07 redo101.log
$ls -l /sampledb2/redo0/oradata/sampdb/redo2/
-rw-r----- oracle oinstall 524288512 27 Oct 15:21 redo102.log
$ls -l /sampledb3/redo0/oradata/sampdb/redo3/
-rw-r----- oracle oinstall 524288512 27 Oct 15:33 redo103.log

ORA-00313: open failed for members of log group 1 of thread 1

Hi
I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
connect target=/
run{
startup nomount;
allocate channel c1 type disk;
allocate channel c2 type disk;
allocate channel c3 type disk;
allocate channel c4 type disk;
restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
alter database mount;
set newname for all datafiles
restore database;
set until logseq = 29317 thread = 1;
switch datafile all;
recover database;
alter database open resetlogs;
One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Why is it looking for at the old path yet?
I'm not sure what I missed and how to proceed. Please help.
Thanks,
Mamata

I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
You might try to set these two parameters and see if it works.
good luck.
rgds
Kjell Ove

ORA-00313: open failed for members of log group 4 of thread 2

Hi.
i have found the below error in one of RAC instance.Could you please advise on this since i am new to RAC env
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423'
ORA-17503: ksfdopn:2 Failed to open file +NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423
ORA-15032: not all alterations performed
ORA-29702: error occurred in Cluster Group Service operation
ORA-29702: error occurred in Cluster Group Service operation
Thanks
Sai

any update on this?

ORA-00313: open failed for members of log group 3 of thread 1

Whenever I try to login as a user I get the following:
sqlplus user/user
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Nov 9 10:43:39 2007
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
So It occurs to me to login as sysdba and restart the DB …
SQL> connect sys/manager as sysdba
Connected.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 536870912 bytes
Fixed Size 1281264 bytes
Variable Size 150995728 bytes
Database Buffers 377487360 bytes
Redo Buffers 7106560 bytes
Database mounted.
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/u06/oradata/RKDB/redo03.log'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 2: No such file or directory
Additional information: 3
SQL> quit
I now realized what happened and how this happened. During a clean-up effort this file was accidentally deleted and unfortunately we don’t have any backups.
I am willing to lose the data. Is there something I can do so that the startup does not try to open this file ?
All I am able to do now is to mount the database but not open it.
Thanks in advance,
Daniel

this is what I get now ...
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL> Recover database until cancel;
ORA-00279: change 608619 generated at 11/09/2007 10:00:41 needed for thread 1
ORA-00289: suggestion : /u05/oradata/RKDB/arch/log1_33_633207859.arc
ORA-00280: change 608619 for thread 1 is in sequence #33
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'/u05/oradata/RKDB/arch/log1_33_633207859.arc'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 2: No such file or directory
Additional information: 3
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
SQL>

My mum wants to add Cd's onto her itunes but she only has itunes on her ipad and I have my itunes on my laptop, if i sign out and she signs in will her itunes come up and will my itunes be the same when i log back in?

So my mum has an ipad and iphone and she wants to connect it to a laptop so she can add Cd's to her itunes and then to her ipad and phone But she doesnt want my itunes as she has bought stuff on her account So if I lgged out of m itunes on my computer will she be able to log in and add Cd's that way? ALso will my itunes be okay afterwards?

Welcome to the Apple Community.
iTunes won't let you log into another account and use features such as automatic downloads, iTunes Match etc etc unless the account you are currently logged into has been logged in for at least 90 days. DON'T EVEN TRY IT.
Instead create a new user account for her on your computer and set up iTunes there for her, avoid using automatic downloads etc

Thread 1 cannot allocate new log - Checkpoint not complete caused by small

Hello, one of my customers databases (setup by the customer) is running in archivelog mode. We find every day in the archivelog more than 10x the error "...cannot allocate new log - Checkpoint not complete "
The system has theese parameters:
select group#,members,bytes from v$log;
GROUP# MEMBERS BYTES
1 2 8388608
2 2 8388608
3 2 8388608
4 2 8388608
5 2 8388608
6 2 8388608
7 2 8388608
8 2 8388608
9 2 8388608
10 2 8388608
I asked the formder admin, why the redologs has only 8mb size. The answer was: "To find out, when there was big activity in the database. The count of archivelogs are bigger if you has small redologs. If you use some 250m redologs, we cannot see when tha database has big load. But this is important in case of recovery to recover the database to the point in time before the big load was has taken place." ... ???
Okay, if the customer wants to have 8 MB redologs ... I don´t care. But how can i prevent now the error message? The only way for me is to setup more redolog groups. But it would be very confusing to have 50 or 70 groups of redologs.
What can I do else to prevent the error?

what is the log frequency?
logfile size?
can you check fast_start_mttr_target as well
check the following description:
Sometimes, you can see in your alert.log file, the following corresponding
messages:
Thread 1 advanced to log sequence 248
Current log# 2 seq# 248 mem# 0: /prod1/oradata/logs/redologs02.log
Thread 1 cannot allocate new log, sequence 249
Checkpoint not complete
This message indicates that Oracle wants to reuse a redo log file, but
the current checkpoint position is still in that log. In this case, Oracle must
wait until the checkpoint position passes that log. Because the
incremental checkpoint target never lags the current log tail by more than 90%
of the smallest log file size, this situation may be encountered if DBWR writes
too slowly, or if a log switch happens before the log is completely full,
or if log file sizes are too small.
When the database waits on checkpoints,redo generation is stopped until the
log switch is done.
Edited by: CKPT on Jul 19, 2010 7:37 PM

Thread 1 cannot allocate new log, sequence 5720 Checkpoint not completed

Hi,
I can see a lot of messages like that:
Thread 1 cannot allocate new log, sequence 5720
Checkpoint not complete
What is the problem?? I think is about permissions.
What permissions do i need to give to log_archive_dest directory and redo log file directory??
Is the only thing that i can see that coulb be the problem because my HP-UX change the permissions of some directories sometimes and the SYS ADMIN don´t know how and why.
I can do:
SQL> alter system switch logfile;
System altered.
SQL> alter system checkpoint;
System altered.
Tks,
Paulo.

Thread 1 cannot allocate new log, sequence 5720
Checkpoint not complete
What is the problem?Lgwr wants to switch to and reuse the "tail" redo group, but since checkpointing for that group is not yet completed, lgwr has to wait until all data, that the redo protects, has been written down to datafiles. This stops (temporarily) writing of redo from buffer to log files and you get that message in the alert.log.
How many redo log groups and what is their size?

ORA-00399: corrupt change description in redo log

Hello!
I have big problem on database startup:
ORA-00283: recovery session canceled due to errors
ORA-00399: corrupt change description in redo log
ORA-00353: log corruption near block 12044 change 465202853 time 12/09/2008
22:00:20
ORA-00312: online log 4 thread 1: '/oradata/orcl/temp/redo04.log'
I have only one member in each redolog group.
Have I any chance to recover database?

Recreating a controlfile does not help in case of a corrupt logfile. Issue
'select group#,status,archived,sequence#,first_change# from v$log;' to get the status of the corrupted logfile. If 'status' = INACTIVE you are lucky, you can clear the group:
alter database clear <unarchived> logfile group n; (use 'unarchived' when 'archived' shows 'NO') .
If 'status' = ACTIVE try 'alter database checkpoint;', if this command executes successfully, logfile gets status INACTIVE and again you can clear the logfile, if not you have to handle the logfile as CURRENT.
If 'status' = CURRENT you must do an incomplete recovery up to the latest usable SCN:
restore database until scn <first_change#_of_current_logfile>;
recover database until scn <first_change#_of_current_logfile>;
alter database open resetlogs;
Werner

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

How to get a list of Local Users who has not logged in for 3 months or around 90 days

hi
i found this thread to pull out a list of local users
Retrieve all local user accounts information on remote computers (PowerShell)
however, i need to filter out users who has not logged in for 3 months or around 90 days, how can i do further filtering?
i understand dsquery has an -inactive <xweeks> , however i am doing it for local accounts

$ErrorActionPreference = "silentlycontinue"
$([ADSI]"WinNT://$env:COMPUTERNAME").Children | where {$_.SchemaClassName -eq 'user' -and $_.lastLogin -gt (Get-Date).AddDays(-90)} | ft name,lastlogin
using the sample from the link extendend with the 90 days criteria, the erroraction preference surpresses the errors you get for accounts with no lastlogon value (guest being a typical one)

ORA-01403: no data found in alert.log

Dear All,
I am getting ORA-01403: no data found in alert.log.Could you pls help me out what could be reasons behind it..Due to this i m getting loads of alerts.Pls suggest.
Thanks

ORA-01403 No Data Found
Typically, an ORA-01403 error occurs when an apply process tries to update an existing row and the OLD_VALUES in the row LCR do not match the current values at the destination database.
Typically, one of the following conditions causes this error:
Supplemental logging is not specified for columns that require supplemental logging at the source database. In this case, LCRs from the source database might not contain values for key columns. You can use a DML handler to modify the LCR so that it contains the necessary supplemental data. See "Using a DML Handler to Correct Error Transactions". Also, specify the necessary supplemental logging at the source database to prevent future errors.
There is a problem with the primary key in the table for which an LCR is applying a change. In this case, make sure the primary key is enabled by querying the DBA_CONSTRAINTS data dictionary view. If no primary key exists for the table, or if the target table has a different primary key than the source table, then specify substitute key columns using the SET_KEY_COLUMNS procedure in the DBMS_APPLY_ADM package. You also might encounter error ORA-23416 if a table being applied does not have a primary key. After you make these changes, you can reexecute the error transaction.
The transaction being applied depends on another transaction which has not yet executed. For example, if a transaction tries to update an employee with an employee_id of 300, but the row for this employee has not yet been inserted into the employees table, then the update fails. In this case, execute the transaction on which the error transaction depends. Then, reexecute the error transaction.
There is a data mismatch between a row LCR and the table for which the LCR is applying a change. Make sure row data in the table at the destination database matches the row data in the LCR. When you are checking for differences in the data, if there are any DATE columns in the shared table, then make sure your query shows the hours, minutes, and seconds. If there is a mismatch, then you can use a DML handler to modify an LCR so that it matches the table. See "Using a DML Handler to Correct Error Transactions".
Alternatively, you can update the current values in the row so that the row LCR can be applied successfully. If changes to the row are captured by a capture process at the destination database, then you probably do not want to replicate this manual change to destination databases. In this case, complete the following steps:
Set a tag in the session that corrects the row. Make sure you set the tag to a value that prevents the manual change from being replicated. For example, the tag can prevent the change from being captured by a capture process.
EXEC DBMS_STREAMS.SET_TAG(tag => HEXTORAW('17'));
In some environments, you might need to set the tag to a different value.
Update the row in the table so that the data matches the old values in the LCR.
Reexecute the error or reexecute all errors. To reexecute an error, run the EXECUTE_ERROR procedure in the DBMS_APPLY_ADM package, and specify the transaction identifier for the transaction that caused the error. For example:
EXEC DBMS_APPLY_ADM.EXECUTE_ERROR(local_transaction_id => '5.4.312');
Or, execute all errors for the apply process by running the EXECUTE_ALL_ERRORS procedure:
EXEC DBMS_APPLY_ADM.EXECUTE_ALL_ERRORS(apply_name => 'APPLY');
If you are going to make other changes in the current session that you want to replicate destination databases, then reset the tag for the session to an appropriate value, as in the following example:
EXEC DBMS_STREAMS.SET_TAG(tag => NULL);
In some environments, you might need to set the tag to a value other than NULL.

Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Hi!
Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?

Making changes to PDF file: Apple Support Communities
Have just noticed this in a thread today. The link from Klaus1's post may allow you to use PDF and work on it. I haven't tried it but it may give you some extra ammunition.

So some moderator made my other thread read only

I am getting crappy DSL service after 8 years of being able to steadily get 1.3 Mbps on my 1.5 service. Now I am lucky to get 0.8 Mbps and not get disconnected 10 times a day and have to off/on my modem. Here is what all I have tried:
Called customer support 4 months ago and jumped thru all their hoops. Restarted modem, removed/reinstalled cables, swapped ends of cables, changed out cables, virus scanned computer with mine, their, and then a different virus scanner of mine. I'm now using Microsoft's virus protection and running Windows XP. I also got a new modem to replace my 10 year old Westell, the new one is a Westell 7500, did not help switching modems.
I've used a Netgear router for years but to make sure it was not a problem I've connected my PC directly to the Westell 7500, no difference. I've unplugged all the phones in the house so that only the modem was connected, rebooted everything, no help. Yes, every phone has a filter.
Verizon customer service, from India it sounds like, always wants me to jump thru the same hoops on every call because all they know is to read from a script. Today's call was pretty much my last straw with Verizon if I can't get some help. They told me to call billing and request the 1.0 service because the 1.5 Mbps service that I've had at this location is not available at this location and that the slower service would solve my problems. I posted my Transciever Statistics on the other thread, below is a ping test that I just ran.

Usually when they make threads read-only, it's because they've copied it to the private support area. Have you gotten any messages from the moderator that made the change? You should be able to reach your messages via the link next to the envelope icon on the upper right-hand side of the page.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

ORA-01613: thread 2 only has 1 logs - at least 2 logs required to enable

Similar Messages

Maybe you are looking for