ORA-03114 not connected with Oracle when I execute Query
Hi!
I have a Problem with Oracle 9 but I don't know what wrong.
When I execute this query I get an error everytime:
select * from
perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where pl.von < sysdate
and
pl.id not in
select idperleist from rechaus
where buch_schl <> 'STRN'
It's not the complete select but the point is I use
"left outer join leikat l on pl.lsnr = l.lsnr"
( not the (+) - Opoerator) and a "not in" -Clausel.
Without the "not in" -Clausel the select runs fine.
Sorry for my bad english g
Thx for help :)
Michael
Hi!
My Selection doesn't run :((
The Selection runs with (+) -Join and not with "left outer join" .
i need the "left outer join" couse the Application runs on Oracle
and Interbase with same Selections. Other Selections with "left outer Join"
are running under my Oracle 9.2 Database.
Here something I tested:
Selection runs with (+)- Join and count ():
select count(pl.id) anz
from perleist pl , leikat l
where
pl.lsnr = l.lsnr (+)
--left outer join leikat l on l.lsnr = pl.lsnr
and (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Runs without count() and with "left outer join" :
select --count(pl.id) anz
from perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Error ORA-03114 when usinf count () and
"left outer join":
select count(pl.id) anz
from perleist pl
left outer join leikat l on l.lsnr = pl.lsnr
where
(pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Selection runs without "not in"
Selection runs without count()
Selection runs with (+) and not with
"left outer join"
Thx for help :)
MD
Similar Messages
-
Error: ORA-03114: not connected to ORACLE
While executing the database creation at the middle it is asking for password even if i give password (first attempt ) or empty enter (Last attempt)i'm unable to connect the database.
Password for DBSNMP user:
null [ORA-03114: not connected to ORACLE
Thanks!in my lsnrctl i am unable to see the database
H:\lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:10:31
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date 01-FEB-2013 19:01:09
Uptime 0 days 0 hr. 9 min. 22 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\listener.ora
Listener Log File e:\app\username\diag\tnslsnr\mysystem\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Services Summary...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Service "First" has 1 instance(s).
Instance "First", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyi am able to see the all the database which running under this instances
After that i pingged the database
H:\>tnsping First
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = FIRST)))
OK (30 msec)where as in tnsping Last i am able to see the database
H:\>tnsping Last
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-FEB-2013 19:13:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost
)(PORT = 1522)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = LAST)))
OK (30 msec)Last database is in oracleserviceLast
What is wrong with the process. -
ORA-93114 Not connected to Oracle when using hsodbc
Hi,
I am trying to transfer data from SQLServer 2000 to Oracle 8.1.6 on Sun.
I have configured my ODBC on Sun and it works fine.
Now I am trying to get the data in Oracle.
These are my settings in hsodbc.ora,tnsnames.ora and listener.ora.
HS_FDS_CONNECT_INFO = nj050149
HS_FDS_TRACE_LEVEL = 2
HS_FDS_TRACE_FILE_NAME = $ORACLE_HOME/hssql.trc
HS_FDS_SHAREABLE_NAME = /opt/odbc/lib/ivmsss18.so
# ODBC specific environment variables
set ODBCINI=/opt/odbc/odbc.ini
===============================
tnsnames.ora
hsodbc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
===============
listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = oradev.css.mot.com)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(SID_NAME = NJ05DEV)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = hsodbc)
==========
I have set up a dblink pointing to hsodbc.
But when I try to select from a table in SQLServer
I get the error message
ERROR at line 1:
ORA-02068: following severe error from HSODBC
ORA-03114: not connected to ORACLE
Can you please help. I could not identify the problem.
Thanks
AnaHi,
I am trying to transfer data from SQLServer 2000 to Oracle 8.1.6 on Sun.
I have configured my ODBC on Sun and it works fine.
Now I am trying to get the data in Oracle.
These are my settings in hsodbc.ora,tnsnames.ora and listener.ora.
HS_FDS_CONNECT_INFO = nj050149
HS_FDS_TRACE_LEVEL = 2
HS_FDS_TRACE_FILE_NAME = $ORACLE_HOME/hssql.trc
HS_FDS_SHAREABLE_NAME = /opt/odbc/lib/ivmsss18.so
# ODBC specific environment variables
set ODBCINI=/opt/odbc/odbc.ini
===============================
tnsnames.ora
hsodbc =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
===============
listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.css.mot.com)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = oradev.css.mot.com)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(SID_NAME = NJ05DEV)
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = /home/oracle/product/8.1.6)
(PROGRAM = hsodbc)
==========
I have set up a dblink pointing to hsodbc.
But when I try to select from a table in SQLServer
I get the error message
ERROR at line 1:
ORA-02068: following severe error from HSODBC
ORA-03114: not connected to ORACLE
Can you please help. I could not identify the problem.
Thanks
Ana ==============================================
I modified the tnsnames.ora to say
hsodbc.css.mot.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nj050149)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc)
and now I get an error message saying
ORA-12545: Connect failed because target host or object does not exist
Please help.
Ana -
SQLLDR run command line fails: ORA-03114: not connected to ORACLE
We moved our db (11.2.0.3) to a new server (VM) and cannot get sql loader direct load to run for a non-oracle db owner account without specifying a connection string (@DB). I have the environment set up correctly for this user and can connect to the database via sqlplus.
sqlldr dba1 control=test.ctl direct=yes <==FAILS
Password:
SQL*Loader: Release 11.2.0.3.0 - Production on Fri May 17 13:00:32 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
SQL*Loader-925: Error while uldlfca: OCIStmtExecute (ptc_hp)
ORA-03114: not connected to ORACLE
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
sqlldr dba1@DB control=test.ctl direct=yes <==SUCCESSFUL
Password:
SQL*Loader: Release 11.2.0.3.0 - Production on Fri May 17 12:59:11 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.My thoughts were along the line that the environment for user x not set up correctly but I verified ORACLE_SID & ORACLE_HOME prior to posting. This user's environment references TNS_ADMIN so I'm sending you the tnsnames.ora from that location.
Please note that I can execute this logged in as the db binary owner (environment set the same as user x).
DWQ1 =
(DESCRIPTION =
(ENABLE = BROKEN)
(ADDRESS = (HOST = xxxx)(PORT = 1521)(PROTOCOL = TCP) )
(CONNECT_DATA =
(SERVICE_NAME = DWQ1)
) -
SQLPlus COPY error: ORA-03114: not connected to ORACLE
This is what I'm trying to do:
I'm logged into an Oracle 8.1.6 database on a Windows 2000 Professional box and trying to copy data and tables from an Oracle 7.3.4 database on an HP/UX box.
I log into my 8.1.6 SQLPlus as:
scott/tiger@testdb
Then I run the following:
SQL> set copycommit 1
SQL> set arraysize 1000
SQL> copy from user/user1@devp1 -
create reps_t -
using -
select * from reps_tThis is my error:
ORA-03114: not connected to ORACLE
Can someone give me a better understand how SQLPlus COPY works and give me an idea how to locate the problems.
Thanks,
Laith E.H.
nullI think this combination user/user1@devp1
is not ok.
U can get good material about copy command
from technet itself. Just search for Copy -
where can I get a list of bugs fixed in ODP 10.2.0.2 ? We have sporadic problems in ODP 10.2.0.1 (Oracle.DataAccess.Client.OracleException ORA-03114: not connected to ORACLE).
Thanks for the information
PatrikHi Patrik,
I posted the bug fixes in 10.2.0.2.20 in Differences between 10.2.0.1 and 10.2.0.2 ?
Cheers,
Greg -
ORA-03114: not connected to ORACLE
hi all,
while connecting to the db ,useras are not able to connect to the primary db thru TOAD,we have two RAC instance at primary db of oracle 9.2.0.6 on solaris platform......
this error generally occurs....i am able to connect thru comand prompt by changing the ipaddress at the tnsnames.ora but i am not able to connect to TOAD,it is correctly poniting to tnsnames.ora....
-
[Oracle][ODBC][Ora]ORA-03114 not connected
I' have oracle 10g express edition.
I use a c++ windows service administration connections and a Visual Basic program.
Vb invoke to c++ service, this create the connection and keep.
Vb invoke the interface exposed to c++ service to execute sentence and when c++ service want execute, this error appears [Oracle][ODBC][Ora]ORA-03114 not connected.
What happens???
Thanks..Are you using a Vb .net ?
if yes look for this link http://support.microsoft.com/default.aspx?scid=kb;en-us;830173
If no, the connection when using sqlplus works fine ?
cheers -
Forms 6i is not connecting with Oracle 11g database?
Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N -
My phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac
my phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac
If the device isn't be recognized by itunes, try following the troubleshooting steps in one of these articles
http://support.apple.com/kb/TS1538 for windows
http://support.apple.com/kb/TS1591 for mac -
Devloper form 6i not connect with oracle 8i
hi master
sir i have devloer form 6i and newly install oracle 8i database but my form not connect with database
how i connect with database
please give idea
thanking you
aamirchange the tnsnames.ora you're forms 6i is using. Usually in the net80\admin path of your forms 6i home.
-
Central not connect to oracle when install sap4.7ext110
hi,i install sap4.7 ext1.1 by
standalone way on two hosts.
during the installation step of the
DB instance ,there is a dialog pop
up ,it says 'start up the central
instance ',then i start the central
instance, the disp+work process was
start for a while then down .i
serached notes,and found 400241,also
i initialized the SISADM in the
sapdba tools ,but it did not work .
thanks
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M
M Wed Mar 12 08:56:36 2008
M systemid 324 (IBM RS/6000 with AIX)
M relno 6200
M patchlevel 0
M patchno 1773
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 450812
M
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 450812) [thxxhead.c 1060]
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '/usr/sap/R3P/SYS/exe/run/dboraslib.o' ...
B Library '/usr/sap/R3P/SYS/exe/run/dboraslib.o' loaded
B Version of '/usr/sap/R3P/SYS/exe/run/dboraslib.o' is "620.02", patchlevel (0.1603)
B New connection 0 created
C No ORACLE_HOME in environment ==> evaluating profile parameter DIR_ORAHOME
C Setting ORACLE_HOME to '/oracle/R3P/920_64' (profile parameter DIR_ORAHOME)
C Client NLS settings: AMERICAN_AMERICA.US7ASCII
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@R3P on connection 0 ...
C Attaching to DB Server R3P (con_hdl=0,svchp=112164078,svrhp=112165078)
C Starting user session (con_hdl=0,svchp=112164078,srvhp=112165078,usrhp=11216db08)
C Now I'm connected to ORACLE
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10065]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=112164078,usrhp=11216db08)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@R3P on connection 0 ...
C Starting user session (con_hdl=0,svchp=112164078,srvhp=112165078,usrhp=11216db08)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 3878]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 9718]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 962] [dbsh 0962 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1197]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8847]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 241]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 450812) [dpuxtool.c 316]Hi,
Please specify whether you have installed CI and DB on two different machines (hosts).
Have you given proper entries when asked about Database Server during your CI installation ? Check the SAPDBHOST parameter in the DEFAULT.PFL
If yes then have you installed oracle client on CI ? You will have to install it.
Please check and reply.
Regards,
Suhas -
Could not connect with Oracle 9iAs Portal
I have already install oracle9iAs ,but when I try to connect to
oracle 9i AS portal , the server return these messages to me :
Proxy log On failed.
Please verify that you have specified correct connectivity
information i.e.username, password & connect-string in the
Database Access Descriptor
Error-Code:6401
Error TimeStamp:Thu, 18 Oct 2001 08:22:24 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listening. This error can also
occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD
for this URL is valid and the database listener is running. "
How could I do ???
Thank you !Shi
Check out the FAQ document on portalstudio:
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#Inst
allation
And Troubleshooting section of the Configuration Guide:
http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/p
ortals.102/a90096/toc.htm -
Can Not Connect with Oracle.
OK I can connect and add a new data source when I am in the Creator IDE. When I run the application in gives me the error below. What I have found is the system does not create the JDBC resource and the JDBC Connection pool on the Application Server. Is there a way I need to push this down? I have not had to do this whenm I made test apps in PointBase, do I need to do it when I am using Oracle connection.
Thank
Mark Singleton
The Error:
java.lang.NullPointerException
at com.sun.sql.rowset.JdbcRowSetXImpl.prepare(Unknown Source)
at com.sun.sql.rowset.JdbcRowSetXImpl.execute(Unknown Source)
at pachange.Page1.submit_action(Page1.java:153)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72)
at javax.faces.component.UICommand.broadcast(UICommand.java:312)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
at java.lang.Thread.run(Thread.java:534)
|#]No. You need not have to do this. Creator should automatically do this for you.
BTW, are you using the DataDirect JDBC jar files that comes bundle with Creator?
The following exception tells me, this could be becuase the JDBC driver your using is not JDBC 3.0 compliant. The error occurs when a "PreparedStatement" is created and the driver is returning null at that point.
- Winston -
HT1459 ipod touch 2nd generation not connecting with itunes when plugged in
ipod touch 2nd generation is not recognized when plugged into computer, by itunes or computer
thank youIf you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.
Next try:
iOS: Device not recognized in iTunes for Windows
Maybe you are looking for
-
i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?
-
HCM Certification in ECC6.0
Hi All, I am preparing for direct HCM certification in ECC6.0. I have collected lot of information from this forum. I would like to know, how far payroll is included in the exam i.e only basic concept from payroll or PCR, schema and payroll process w
-
Essbase 9.3.1 Standalone Installation Error
Hello Expects, I am facing the issues with Essbase Standalone Installation(version 9.3.1) and Error is the below. java.lang.NoClassDefFoundError:run Exception in thread "main" Please respond on the above error, if anybody know about it. Thanks & Rega
-
Password works for login but not for the Adobe CC Desktop application
Password works for login but not for the Adobe CC Desktop application
-
G570, AMD Radeon getting very hot
Recently, the AMD Radeon in my G570 started to get very hot, over 100 °C, and freezing the display for a couple of seconds or shutting down the laptop all together. I recently updated the BIOS. Since the first signs I checked that the fan works and g