ORA-12154 when try to connect oracle 9i with forms9i

Hi everybody,
I install oracle database 9i AS in:c:\ora9ias folder, with ora9ias database name.
and I install oracle developer suite in c:\ora9ids, and both installation were successfull.
in oracle with sql+, I connect with system/manager@ora9ias it's working,
but when I work with forms, I have this error mesage:
ORA-12154, can't resolve symbolique adresse TNS?
Thanks for your help...
best regards

In Oracle 9i Release 2 onwards, passwords for SYS and SYSTEM are entered by you when you install Oracle 9i R2.
In order to connect to SQL Plus via Host String, e.g. ora9i
User name: sys
Password: YOUR_NEW_PASSWORD (this is he actual password that you entered when you installed Oracle 9i)
Host String: ora9i as sys

Similar Messages

Ora-12154 when trying to connect to database from fortran application

I am trying to connect to database and run an simple select query to a table(without any where clause) using pro*fortran code.
the connect strng is like
exec sql connect :uidpwd
where uidpwd = username/password@SID
SID and tnsnames connect string are the same.
The fortran (profortran) code is placed in the database server and there are no errors when make is run.
Tnsping is working fine, also i am able to conect using sql*plus and run the same query.
Please help
Thanks and Regards
Nitin

Hi Nitin
Thanks for the helpful! With your point I'm now Pro! Great thanks.
By the way have your seen that?
Files such as LISTENER.ORA, TNSNAMES.ORA, SQLNET.ORA, if configured manually, or copied and edited from earlier releases of Oracle Database may have record attributes that are incompatible with Oracle Database 10g release 2. The software cannot read such files. The required record format is stream_lf and the record attributes are carriage_control and carriage_return.
This may result in:
Inability to start the listener
Services not registered with the listener
Inability to connect to other databases
ORA-12154: TNS:could not resolve service name
Run the following command on each file affected:
$ DIR/FULL filename
An output similar to the following may be displayed:
Record format: Variable length, maximum 255 bytes
Record attributes: Carriage return carriage control
If the output includes the preceding entries, then run the following command:
$ CONVERT/FDL=SYS$INPUT filename filename
RECORD
CARRIAGE_CONTROL CARRIAGE_RETURN
FORMAT STREAM_LF
^Z
Otherwise herewith an interesting metalink note. Doc ID: Note:437597.1
Subject: Ora-12154 When Executing Pro*Fortran Code Compiled With Oracle 10g.
Hope this will also help you...
Cheers
Hubert

ORA-03113 when trying to connect to database

RDBMS Version:: 9.2.0.6
Operating System and Version:: Win2003 Small Business Server
Error Number (if applicable):: ORA-03113
Server Net Version:: 9.2.0.6
Client Operating System and Version:: Solaris10
Client Net Version:: 2.1.3
ORA-03113 when trying to connect to database
I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
Activating traces on the client-side showed the following errors:
-<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
-<ERROR>- nsopen: unable to open transport
-<ERROR>- nsprecv: transport read error
-<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
-<ERROR>- osnqrc: wanted 1 got 0, type 0
-<ERROR>- osnqper: error from osnqrc
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12537
-<ERROR>- osnqper: ns (2) err code: 12560
-<ERROR>- osnqper: nt main err code: 507
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqsm: send-break: failed to send OOB break...
-<ERROR>- osnqper: error from send-marker
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12583
-<ERROR>- osnqper: ns (2) err code: 0
-<ERROR>- osnqper: nt main err code: 0
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqbr: returning 3113
Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?

Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ?

When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

The problem has been fixed with the most recent OS X software update.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When i try to connect to facebook with firefox, facebook wants me to send in card informaion and says that there have been unusually behavior in my account even thought it hasnt, it works in every other browser?

When i try to connect to Facebook with Firefox, Facebook tells me to Verificate my account with my cardnumber and also my adress, it tells me that We detected some unusually behavior in your account, for your security in order to can access your account please send us all requried informations, the credit card number must be yours or a member of your family. We won't save the credit card in our datebase and won't make any charges. We ask only for verification purpose.
Why is this? Facebook works with every other browser and on other computers and i dont have trojan.

I had the same prob. but recently i just formated my laptop and after that it starts working finely in firefox i think it was a kind of virus that discont. after formating the laptop. only windows drive....

HT201210 I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes

I tried to update my iphone4, in the middle it gave an error and now when try to connect it the computer doesnt even detects it and neither does itunes

Power the phone off completely. Plug the USB end of the cord into the computer, leaving the other end unplugged from the phone. While the phone is powered off, open up iTunes, hold down the home button on the phone, and plug in the USB cord to the phone, making sure you keep holding down the home button. In about 15 seconds you should get a pop-up in itunes saying that it's detected an iPhone in recovery mode. Click 'Ok' and 'Restore'.
Your iOS update crashed and your phone is in recovery mode. The good news is that this will fix it, bad news is that unless you had everything backed up in either iTunes or iCloud, you've lost everything as your phone was wiped when the iOS update crashed.

Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please

Have an ipad 2 and have bought the camera connection kit to use with my flip ultra. However when try to connect ot says there is not enough power to support accessory. Can anyone help please?

If you have ios 5.1.1 the output power is 100ma, on the iOS 5.0.1 the power output is 500ma! This may be the cause?

To connect oracle database with ms access database

i want to connect oracle database with ms access database
i have follow the following steps
1. create ms access database.
2. create system dsn.
3. make change in listener.ora.
4. make change in hs folder.
5.change the tnsname.ora.
6. lsnrctl stop and lsnrct start.
7. create database link in oracle sql*plus.
8.select the table of ms access
but i have return the foloowing error.
ORA-12154: TNS:could not resolve the connect identifier specified
using window 2000, oracle 10g

Have a look on ths thread, may it helps ...
Re: copy access data into oracle with form builder 9i

How to connect oracle database with JAVA

how to connect oracle database with JAVA....
using j2sdk and Jcreator . which connector to use .. what are the code for that ..

PLEASE .... Ask in an Oracle Java forum.
And read the documentaiton. There is a whole document devoted to doing that. http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/toc.htm has examples.
PLEASE ... do not ask product questions in a forum which clearly has a title saying it is devoted to assisting with download problems.

HT1977 I downloaded the itunes and I update it and also I downloaded many apps but when I am connecting my iphone with my pc and want to put the downloaded apps to my iphone and when I am sync them on step 3 the sync process is hidding, plz help me..

Dear All, please help me.
I downloaded the itunes and I update it and also I downloaded many apps but when I am connecting my iphone with my pc and want to put the downloaded apps to my iphone and when I am going to sync them on step 3 the sync process is hidding, I don't know what is the probleme please advice me/help me in this
my iPhone version is 6.0
regard...?
Thanks,
Abdullah Misrat

Connect the device to the computer.
Open iTunes.
Select the content desired to sync.
Sync.

Oracle error ORA-604 when opening a connection

I am facing an issue with my WCF service which is using ODP.NET version 4.112.2.0(x64) and Oracle 11g.
The service runs without any problems on the test servers but on production server (Windows 2008 R2) when an attempt is made to call any service method it fails with the following Oracle error code Ora-604. the message is
ORA-604: error occurred at recursive SQL level %s
The exception is thrown when a call to meethod Open is made to open a connection.
There is no inner exception. So far I have tried checking the connection string, the user permissions and setting the TNS_ADMIN environment variable but nothing has worked.
Another thing to mention is that another WCF service which uses some of the same stored procedure I am using is working fine on the same server.
Has anyone seen this before?
Thanks,
A

Do you have a login trigger?
select * from dba_triggers where triggering_event like 'LOGON%'
If so, try disabling it.
Does the working service use the same credentials as this problem service?
Are you able to connect using sqlplus, with the same credentials from the same client to the same database? If it's not an ODP.NET specific problem, the dba guys might be able to help better: General Database Discussions
Greg

ORA-12154 when connect to Ora10 using an odbc from visual C++

Hello
I have the follong problem , I have a machine that must access to an oracle database , I have made an Odbc Conection and if I make atest there is no one problem and the test is sucessfully . My problem is when I 'm trying to access using my visual c++ program in this case I get an ORA -12154 error , using the same odbc connection that I have probe, also I have probe this program over others machines and there is no problem to access to the database . Can anyone tell me something ??
The machine is an windows XP and the programa is a Visual C++.net .

Well we have find the problem , was the path of the application . this has 84 characters we have put our program in a shortest path and now works!!!!

ORA- 12154 Error: while php connect to oracle?

While I use OCILogon connect to Oracle9i,show error message as follow:
Warning: ociopen_server: Error while trying to retrieve text for error ORA-12154 in /var/www/html/inc/sev.inc.php on line 57
most of people think of its tnsname' problem,but I modify my tnsnames.ora,and sqlplus can connect with correct username and password.
page source as follow:
<?
function db_connect()
//putenv("ORACLE_SID=test");
//putenv("NLS_LANG=SIMPLIFIED CHINESE.ZHS16CGB231280");
putenv("ORACLE_HOME=/home/oracle/OraHome1");
$connect = OCILogon("system","manager","test");
if ($connect)
return $connect;
else
return -1;
?>
server Env: linux red hat 8.0,apache 2.0.44,php4.3.1,oracle9.2.0
please! Thank in advance!

Do you have more than ONE oracle homes created?
Does your PATH env. variable correctly references the ORACLE_HOME directory?

ORA-12154 when connects. Instant client installed.

Hi. I am installed instant client 10.2 and cannot connect to database : give error ORA-12154: TNS:could not resolve the connect identifier specified. I am using Linux. I am set TNS_ADMIN and put into this directory file tnsnames.ora with all necessary instances, but have not no one result.

Add the following line to sqlnet.ora in the directory to which TNS_ADMIN points:
TRACLE_LEVEL_CLIENT = SUPPORT
Then try again and examine the *.trc file created. This should tell you what's wrong.
Yours,
Laurenz Albe

ORA-12154 when try to connect oracle 9i with forms9i

Similar Messages

Maybe you are looking for