ORA-19511: A backup or restore session is already in progress. (100:17:0)
Hi,
I am duplicating a database as document explains. Legato support says that there's no session, neither can be seen in the target or catalog.
ORA-19870: error reading backup piece full_open_IEBDPR01_h7k7ccrn_1575
ORA-19507: failed to retrieve sequential file, handle="full_open_IEBDPR01_h7k7ccrn_1575", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
A backup or restore session is already in progress. (100:17:0)
failover to previous backup
Rman log doesn't report any error with the backup.
Thanks.
My code:
RMAN> connect target sys/s1s@IEBDPR01
connected to target database: IEBDPR01 (DBID=1649906189)
RMAN> connect catalog rman/orarmandb@RMANDB
connected to recovery catalog database
RMAN>
RMAN> connect auxiliary /
connected to auxiliary database (not started)
RMAN> RUN
2> {
3> ALLOCATE AUXILIARY CHANNEL ch1 DEVICE TYPE sbt;
4> DUPLICATE TARGET DATABASE TO RECOIEBD;
5> }
Using RMAN with Legato. Errors are:
channel ch1: specifying datafile(s) to restore from backup set
restoring datafile 00005 to /ctirss/nuevo/bddapsua/index/dapsuaidx01.dbf
restoring datafile 00007 to /ctirss/nuevo/bddapsua/index/gefideidx01.dbf
restoring datafile 00015 to /ctirss/nuevo/bdsime/index/accesoidx01.dbf
restoring datafile 00017 to /ctirss/nuevo/bdsicetec/index/nasegidx01.dbf
restoring datafile 00019 to /ctirss/nuevo/bdsicetec/index/sicetecidx01.dbf
restoring datafile 00020 to /ctirss/nuevo/bdsicetec/undo/undotbs03.dbf
restoring datafile 00021 to /ctirss/nuevo/bddapsua/undo/undotbs02.dbf
restoring datafile 00023 to /ctirss/nuevo/bdsime/index/homoniindex01.dbf
restoring datafile 00028 to /ctirss/nuevo/bdsime/index/tbs_pdii_index_01.dbf
channel ch1: reading from backup piece full_open_IEBDPR01_f3k5l2qk_1507
ORA-19870: error reading backup piece full_open_IEBDPR01_f3k5l2qk_1507
ORA-19507: failed to retrieve sequential file, handle="full_open_IEBDPR01_f3k5l2qk_1507", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
A backup or restore session is already in progress. (100:17:0)
Hope this is enough. Thanks!
Similar Messages
-
ORA-19511 when backup with rman (using NetBackup Media Manager)
Hello forum
I added new database hosts to NetBackup, tried to test backup of the first instance on one host, below is what I get - Do you know cause and solution? Backup from NetBackup master server can be performed without problems. Below you will find the output from sbttest too.
Thanks Casi
---------- rman log -----------
Recovery Manager: Release 10.2.0.3.0 - Production on Fri Mar 7 10:26:28 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: IARTS (DBID=2414804385)
connected to recovery catalog database
RMAN> run
2> {
3> allocate channel c1 DEVICE TYPE sbt PARMS='ENV=(NB_ORA_SERV=sksta00500.ksta.zh.ch,NB_ORA_CLASS=LX_ORA_ONL)';
4> backup current controlfile;
5> }
allocated channel: c1
channel c1: sid=110 instance=IARTS1 devtype=SBT_TAPE
channel c1: VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
Starting backup at 07-MAR-08
channel c1: starting full datafile backupset
channel c1: specifying datafile(s) in backupset
including current control file in backupset
channel c1: starting piece 1 at 07-MAR-08
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 03/07/2008 10:27:11
ORA-19506: failed to create sequential file, name="19jalk7t_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
VxBSAValidateFeatureId: Failed with error:
Server Status: file open failed
RMAN>
---- sbttest ---------------------------
$ORACLE_HOME/bin/sbttest /tmp/x.lst
The sbt function pointers are loaded from libobk.so library.
-- sbtinit succeeded
-- sbtinit (2nd time) succeeded
sbtinit: Media manager supports SBT API version 2.0
sbtinit: Media manager is version 5.0.0.0
sbtinit: vendor description string=VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
sbtinit: allocated sbt context area of 8 bytes
sbtinit: proxy copy is supported
-- sbtinit2 succeeded
-- regular_backup_restore starts ................................
-- sbtbackup succeeded
Segmentation faultAre you sure, you installed the proper media management software? Check it:
(1) cd to your $ORACLE_HOME/bin directory
(2) Type sbttest test
The sbttest is a standalone program which test to see if the MML(Media
Management Layer) software is installed and can accept a data stream and return
an identical data stream.
sbttest will return 0 which indicates success or 1 which indicates an error has
occurred. An error means it's not an Oracle problem. -
ORA-19511 sbt__rpc_connect
Hi all, it gave me that error when i want to run a rman script with OSB 10.4.0.1.
The script is:
run {
allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
backup as BACKUPSET current controlfile tag '12262011022035';
restore controlfile validate from tag '12262011022035';
release channel oem_sbt_backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 12/26/2011 17:27:49
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
Database 11gR2, 11.2.0.2, under Linux 64bits.
OSB 10.4
I found a note in metalink to verify de .hostid that has to be the same as the host in the OB tool; i verify that and still has the problem.
Please, can someone help me?
RegardsHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
ORA-19511: Error received from media manager layer, error text:
Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
WahidHi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid -
ORA-19612: datafile 0 not restored due to missing data
Hello,
I'm testing a restore of the controlfile. The database is in archivelog mode and autobackup is set to ON. I successfully did a full backup and backup as copy database.
To test I did the following:
- note the DBID
- shutdown the database
- renamed both controlfiles:
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
When I try to restore the controlfile form autobackup I receive the following error. What could be reason please?
[rcat@oel54]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 10 00:07:41 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
executing command: SET DBID
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101209
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/10/2010 00:09:55
ORA-19870: error while restoring backup piece /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
ORA-19612: datafile 0 not restored due to missing data
$ ll /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkp
-rw-r----- 1 oracle dba 10354688 Dec 9 23:44 /u02/fra/RCAT/autobackup/2010_12_09/o1_mf_s_737336682_6j2pyv2l_.bkpThanks!The file was indeed corrupted as below will show.
Very strange. Perhaps something with the latest Virtualbox or the SSD/hybrid harddrive. (host MacOSX 10.6, guest Oracle Linux 5.5 UEK)
$ mv /u02/rcat/control01.ctl_old /u02/rcat/control01.ctl
$ mv /u02/fra/rcat/control02.ctl_old /u02/fra/rcat/control02.ctl
SQL> startup mount
ORACLE instance started.
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
SQL> alter database open;
Database altered.
$ rman target /
connected to target database: RCAT (DBID=502889862)
RMAN> backup current controlfile;
piece handle=/u02/fra/RCAT/backupset/2010_12_10/o1_mf_ncnnf_TAG20101210T012420_6j2wsoko_.bkp
Finished backup at 10-DEC-10
Starting Control File and SPFILE Autobackup at 10-DEC-10
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 10-DEC-10
RMAN> restore validate controlfile;
piece handle=/u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp tag=TAG20101210T012422
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: validation complete, elapsed time: 00:00:02
Finished restore at 10-DEC-10
SQL> shutdown immediate
$ mv /u02/rcat/control01.ctl /u02/rcat/control01.ctl_old
$ mv /u02/fra/rcat/control02.ctl /u02/fra/rcat/control02.ctl_old
SQL> startup nomount
$ rman target /
connected to target database: RCAT (not mounted)
RMAN> set dbid 502889862;
RMAN> restore controlfile from autobackup;
Starting restore at 10-DEC-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
recovery area destination: /u02/fra
database name (or database unique name) used for search: RCAT
channel ORA_DISK_1: AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp found in the recovery area
channel ORA_DISK_1: looking for AUTOBACKUP on day: 20101210
channel ORA_DISK_1: restoring control file from AUTOBACKUP /u02/fra/RCAT/autobackup/2010_12_10/o1_mf_s_737342662_6j2wspvf_.bkp
channel ORA_DISK_1: control file restore from AUTOBACKUP complete
output file name=/u02/rcat/control01.ctl
output file name=/u02/fra/rcat/control02.ctl
Finished restore at 10-DEC-10 -
How can I get my data which is lost without backup while restoring
I lost my whole datas during restoring session, can I get it back from icloud or somewhere else. please not it was without having a backup
If you did not Back it up there is nowhere to retrieve the Data.
Is it not on the computer you have regularly been Syncing and Backing up to...
Restore from Backup > http://support.apple.com/kb/ht1766 -
RMAN backup and restore for Disaster Recovery
Hi Guys,
I am very new to Oracle and have a question about RMAN backup and restore feature. I am simulating a disaster recovery scenario by having two VMs running oracle 11g, say hosta and hostb, hosta is sort of production db and the other a disaster recovery db (one that will be made primary when disaster occurs). My goal is to backup production db using RMAN and restore it on the other machine. For some reason when I restore the db on hostb, the command restores the previous backup but not the most recent one e.g. I took a backup yesterday (09/20) and applied it to the hostb that worked fine, but when I try to apply a fresh backup from today (09/21) it always picks up the old backup. Here's a dump of the screen:
Starting restore at 21-SEP-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /oracle/app/dev/oradata/forums/s
ystem01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /oracle/app/dev/oradata/forums/s
ysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /oracle/app/dev/oradata/forums/u
ndotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /oracle/app/dev/oradata/forums/u
sers01.dbf
channel ORA_DISK_1: reading from backup piece /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp
channel ORA_DISK_1: piece handle=/oracle/app/dev/flash_recovery_area/FORUMS/back
upset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp tag=TAG20110920T040950
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:05
Finished restore at 21-SEP-11
Notice that it reads the backup piece from this location /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/
whereas my latest backups are stored at a different location.
I am executing following steps at the RMAN prompt on hosta and hostb:
hosta (production site)
backup as compressed backupset database plus archivelog
backup current controlfile format'/oracle/oracle_bkup/ctl_%U'
backup spfile
hostb (Disaster site)
set dbid=13732232063
startup force nomount
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/2011_09_21/o1_mf_nnsnf_TAG20110921T114945_77ndg9ys_.bkp'
shutdown immediate
/* create a init<db_name>.ora file with SPFILE= /oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora */
startup force pfile='/export/home/dev/restore_db/initforums.ora' nomount
restore controlfile from '/export/home/dev/restore_db/backupset/2011_09_21/ctl_1hmn3mic_1_1'
/* restart rman here */
quit
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/2011_09_21' noprompt;
/* call the next two commands on run */
restore database;
recover database;
alter database open resetlogs
quit
Any help will be greatly appreciated.
Thanks,
RajeshThanks guys, I really appreciate all your help here. I redid everything all over again to get all the information you guys wanted. Since I noticed that more eyes are looking into this I am going to reiterate my steps one more time followed by specific answers to questions. My first backup on Host B is located under ..../restore_db/backupset whereas the subsequent one is under .../restore_db/backupset/backupset2.
I take backup on Host A using:
rman target /
backup as compressed backupset database plus archivelog;
backup spfile;
quit;
I restore the backup on Host B using:
set dbid=13732232063;
startup force nomount;
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/o1_mf_nnsnf_TAG20110928T171830_787gbpxh_.bkp'
shutdown immediate;
startup force nomount;
restore controlfile from '/export/home/dev/restore_db/backupset/o1_mf_ncsnf_TAG20110928T171638_787gbkxn_.bkp'
quit;
/* restart rman here */
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset' noprompt;
restore database;
recover database;
alter database open resetlogs;
quit;
I take another backup on Host A using (notice no spfile backup this time):
backup as compressed backupset database plus archivelog;
quit;
I restore the database on Host B using:
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/backupset2' noprompt;
recover database;
alter database open;
quit;
Output of List Backup of database (I have done this after I recovered the second time, also note that it is referring to backupset2 which is were my second backup is stored)
RMAN> list backup of database;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 91 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /export/home/dev/restore_db/backupset/o1_mf_nnndf_TAG2011092
8T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
97 Full 259.16M DISK 00:00:00 28-SEP-11
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: TAG20110928T18352
7
Piece Name: /export/home/dev/restore_db/backupset/backupset2/o1_mf_nnndf
TAG20110928T183527787lv0nb_.bkp
List of Datafiles in backup set 97
File LV Type Ckp SCN Ckp Time Name
1 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
Output of list backup (done after restoring the control file)
RMAN> list backup;
BS Key Size Device Type Elapsed Time Completion Time
87 89.20M DISK 00:00:26 28-SEP-11
BP Key: 87 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g50bm_.bkp
List of Archived Logs in backup set 87
Thrd Seq Low SCN Low Time Next SCN Next Time
1 34 1302253 20-SEP-11 1306439 20-SEP-11
1 35 1306439 20-SEP-11 1307647 20-SEP-11
1 36 1307647 20-SEP-11 1307701 20-SEP-11
1 37 1307701 20-SEP-11 1311393 20-SEP-11
1 38 1311393 20-SEP-11 1311511 20-SEP-11
1 39 1311511 20-SEP-11 1332479 20-SEP-11
1 40 1332479 20-SEP-11 1344418 20-SEP-11
1 41 1344418 20-SEP-11 1350409 20-SEP-11
1 42 1350409 20-SEP-11 1350449 20-SEP-11
1 43 1350449 20-SEP-11 1350854 21-SEP-11
1 44 1350854 21-SEP-11 1350895 21-SEP-11
1 45 1350895 21-SEP-11 1353114 21-SEP-11
1 46 1353114 21-SEP-11 1353254 21-SEP-11
1 47 1353254 21-SEP-11 1353865 21-SEP-11
1 48 1353865 21-SEP-11 1353988 21-SEP-11
1 49 1353988 21-SEP-11 1375403 21-SEP-11
1 50 1375403 21-SEP-11 1376149 21-SEP-11
1 51 1376149 21-SEP-11 1376206 21-SEP-11
1 52 1376206 21-SEP-11 1376246 21-SEP-11
1 53 1376246 21-SEP-11 1379990 21-SEP-11
1 54 1379990 21-SEP-11 1380229 21-SEP-11
1 55 1380229 21-SEP-11 1380266 21-SEP-11
1 56 1380266 21-SEP-11 1380528 21-SEP-11
1 57 1380528 21-SEP-11 1380724 21-SEP-11
1 58 1380724 21-SEP-11 1380861 21-SEP-11
1 59 1380861 21-SEP-11 1381033 21-SEP-11
1 60 1381033 21-SEP-11 1381077 21-SEP-11
1 61 1381077 21-SEP-11 1402243 22-SEP-11
1 62 1402243 22-SEP-11 1423341 22-SEP-11
1 63 1423341 22-SEP-11 1435456 22-SEP-11
1 64 1435456 22-SEP-11 1454415 23-SEP-11
1 65 1454415 23-SEP-11 1490903 23-SEP-11
1 66 1490903 23-SEP-11 1491266 23-SEP-11
1 67 1491266 23-SEP-11 1491347 23-SEP-11
1 68 1491347 23-SEP-11 1492761 23-SEP-11
1 69 1492761 23-SEP-11 1492891 23-SEP-11
1 70 1492891 23-SEP-11 1493678 23-SEP-11
1 71 1493678 23-SEP-11 1493704 23-SEP-11
1 72 1493704 23-SEP-11 1494741 23-SEP-11
1 73 1494741 23-SEP-11 1494790 23-SEP-11
1 74 1494790 23-SEP-11 1510154 23-SEP-11
1 75 1510154 23-SEP-11 1514286 23-SEP-11
1 76 1514286 23-SEP-11 1531967 24-SEP-11
1 77 1531967 24-SEP-11 1543266 24-SEP-11
1 78 1543266 24-SEP-11 1558427 24-SEP-11
1 79 1558427 24-SEP-11 1566924 24-SEP-11
1 80 1566924 24-SEP-11 1578292 24-SEP-11
1 81 1578292 24-SEP-11 1596894 25-SEP-11
BS Key Size Device Type Elapsed Time Completion Time
88 84.03M DISK 00:00:30 28-SEP-11
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g63s9_.bkp
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
1 82 1596894 25-SEP-11 1609028 25-SEP-11
1 83 1609028 25-SEP-11 1622303 25-SEP-11
1 84 1622303 25-SEP-11 1626430 25-SEP-11
1 85 1626430 25-SEP-11 1634486 25-SEP-11
1 86 1634486 25-SEP-11 1648398 25-SEP-11
1 87 1648398 25-SEP-11 1669259 26-SEP-11
1 88 1669259 26-SEP-11 1686820 26-SEP-11
1 89 1686820 26-SEP-11 1686959 26-SEP-11
1 90 1686959 26-SEP-11 1689168 26-SEP-11
1 91 1689168 26-SEP-11 1704759 26-SEP-11
1 92 1704759 26-SEP-11 1719597 27-SEP-11
1 93 1719597 27-SEP-11 1740407 27-SEP-11
1 94 1740407 27-SEP-11 1750125 27-SEP-11
1 95 1750125 27-SEP-11 1765592 27-SEP-11
1 96 1765592 27-SEP-11 1781498 28-SEP-11
1 97 1781498 28-SEP-11 1802311 28-SEP-11
1 98 1802311 28-SEP-11 1811009 28-SEP-11
1 99 1811009 28-SEP-11 1813811 28-SEP-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 89 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_nnndf_TAG20110928T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf -
Errors when backing to tape ORA-19624 ORA-19511
Hi,
We got an error yesteday when backing u to tape, this happens very rarely but following is the message
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-10035: exception raised in RPC: O
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
RMAN-03015: error occurred in stored script BGT2_BSBGPRD1_HOTBCK_DY
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel ch1
RMAN-10035: exception raised in RPC: ORA-19502: write error on file "db_BSBGPRD1_98108_1_667503967", blockno 4323713 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: VxBSASendData: Failed with error:
Server Status: Communication with the server has not been iniatated or the server status has not been retrieved from the server.
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
any suggestions
KedarHi,
If I check in TOAD, then I see that the max size of the tablespace is unlimited. Btw, Tablespace XYZ is actually an index tablespace - dont know if this makes a difference. The max size of the data tablespace is also unlimited.
Using the query select * from user_ts_quotas or dba_ts_quotas, I dont see tablespace XYZ or its data tablespace in this result set. I'm not sure why.
Maybe giving the user unlimited quota on the tablespace might solve the problem - i dont know, but if it does, then I have to ask why has it worked all the time without this and only now it's giving an error??
The user has been doing the same thing everyday for the past couple of years and only now getting this error. -
ORA-19511 Media Management Error
I am getting following error while taking the backup to tape using OSB:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on eps2_sbt channel at 02/22/2008 10:32:30
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
shmcheck: The obtar process (pid=26769) communicating with SBT has terminated.
This might be because the job was cancelled elsewhere, or due to an internal error.
Please check the job transcript for more information.
ORA-19502: write error on file "0sj9beek_1_1", blockno 47105 (blocksize=512)
I have inserted a new tape so there is lot of space available on the tape. Tape is attached to the same box, so its only 1 box with admin, media and client roles.
The backup was working fine earlier on this box, this all started today itself and also the file system backup to tape using OSB is still working fine but not the RMAN backups, nobody changed anything in OSB or Database configurations.
Is it time to log the TAR or is there something else which I can check??
Daljit SinghUsually, that kind of error message indicates that the OSB user (with associated os privilege) does not have os privilege to access SCSI devices (ie tape devices). Believe it or not this is a common problem, especially, for the DBA user which os rights don't always include access to tape devices.
OSB will always adhere to os privileges soooo if the os blocks a user, OSB will also block that user.
Donna -
I accidentally clicked don't restore session ...
I wanted to restore, and actually needed a couple of the sites that i had open.
Is there any way to restore now? I found the sessionstore.js file ... can i do anything with that?
== This happened ==
Just once or twiceDid you also find a file sessionstore.bak from around that time?
If that is the case then make a backup copy of sessionstore.bak elsewhere and copy sessionstore.bak to sessionstore.js -
How to restore sessions after upgrade
Just upgraded to FF 33. Previously I had two windows open. Upon restart only one opened, with all its tabs intact. I would like to recover the other window as well. "Restore session" is either grayed or missing on menu and start pages. Is there a way to recover the second window.
Usually, the History menu will list closed windows you can restore below the grayed out Restore Previous Session. Anything listed?
Before closing Firefox, please back up your session history files to a safe location for potential recovery/salvage operations.
You can open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button.
In the window that launches, scroll down and double-click into the '''sessionstore-backups''' folder. Save all files here to a safe location, such as your Documents folder. We may be able to use them to recover your lost tabs.
The kinds of files you may find among your sessionstore files are:
* recovery.js: the windows and tabs in your currently live Firefox session (or, if Firefox is closed, your last session)
* recovery.bak: a backup copy of recovery.js
* previous.js: the windows and tabs in your last Firefox session
* upgrade.js-''build_id'': the windows and tabs in the Firefox session that was live at the time of your last update
You might also find files Firefox created if it could not update recovery.js (but since Firefox 33 is so new, I don't know what they would be named).
Could you take a look at what you have and the date/time of the various files to see whether you think any of them would have the missing window?
Note: By default, Windows hides the .js extension. To ensure that you are looking at the files I mentioned, you may want to turn off that feature. This article has the steps: http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions -
Restart Restore Session?
How do I restart a restore session on my phone when it pauses?
Hi drneecie,
I apologize, I'm a bit unclear on the exact issue you are describing. If you are on a restore screen with an Apple icon and a progress bar, and the progress bar appears to have paused or stopped moving, you may find the following article helpful:
Apple logo with progress bar after updating or restoring iPhone, iPad, or iPod touch from backup - Apple Support
If you are having other, more general restore issues with your iPhone, you may find this article more useful:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden -
Rman backup and restore noarchive log
Hi,
We are changing our backup tools from exp to rman. For this I am trying to do
restoration in test server of oracle db running on 9.2 noarchive log.
Step 1. Taken complete backup with rman with nocatalog and include controlfile
nput datafile fno=00008 name=D:\ORACLE\ORADATA\TOTO\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 09-MAR-06
channel ORA_DISK_1: finished piece 1 at 09-MAR-06
piece handle=D:\DBBACKUPS\T1.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
Finished backup at 09-MAR-06
Step 2. Deleted database files and control files from database directory.
Step 3. Restore controlfiles
RMAN> restore controlfile from 'd:\dbbackups\t1.bkp';
Starting restore at 09-MAR-06
using channel ORA_DISK_1
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
replicating controlfile
input filename=D:\ORACLE\ORADATA\TOTO\CONTROL01.CTL
output filename=D:\ORACLE\ORADATA\TOTO\CONTROL02.CTL
output filename=D:\ORACLE\ORADATA\TOTO\CONTROL03.CTL
Finished restore at 09-MAR-06
Step 3. after database mount, try to restore datafiles, which is failed
restoring datafile 00024 to D:\ORACLE\ORADATA\TOTO\DIN36\TESTUNV1.ORA
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 03/09/2006 17:24:25
ORA-19505: failed to identify file "D:\DBBACKUPS\TOTOBKP.RMAN"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Why it is looking old backup totobkp.rman which is not existing on disk ? My
backup name is t1.bkp.
Will you pl tell me where I have gone wrong ? Secondly what are the correct
steps to be followed for taking cold backup and restoration.
thanks & regards
pjpOkay let us ponder this for a moment:-
DB NOARCHIVELOG
It does not matter when you take the backup of controlfile because the database is in mount state and no changes are allowed to the db ( Checkpoints etc. )
DB ARCHIVELOG
It does not matter when you take the backup of controlfile because the database is continuously writing to the archivelog's.
End result should not be significantly different as to worry about whether to take backup of control file before or after backup.
Thanks
Gopal -
My apps store will not go online with verizon network, but on wifi it works. I am on an iphone 4, verizon. I tried to do a complete, backup and restore on the phone 1 day before i noticed this problem, The backup finished but the RESTORE would fail I had an error, could not access Apple server ( some server name I cant remember).
I have plenty of space available on the iphone,
8gb free,
ios version- 6.1.3 ( 10B329)
carrier - Verizon 14.0
Modem Firmware - 3.0.04
Can someone help.
I tried doing my backup restore on the same computer as I once did a year ago. and THis time I cant do the restore on the iphone.
computer osx is 10.5.8
itunes version 10.
I do not wish to go to ios 7 at this time.Settings > General > Reset > Reset Network Settings.
Basic troubleshooting is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, contact the carrier to troubleshoot the network connectivity issues. -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
Maybe you are looking for
-
How do I install Adobe Reader on my PC?
I have tried numerous times to install Adobe Reader on my PC and am unable to do so. Suggestions?
-
HTML page with FLASH object doesn't reload upon a redirect
Am using: ECC 6.0 and ABAP SAPGUI development Hi All, I'm seeing a frustrating issue that i'm hoping others have seen and resolved. Here is what i'm attempting and below that is the issue: 1) I have created a ABAP program in which i'm using the HTM
-
Select tool and Tab randomly stop working
When filling in a form in Reader, the select tool and Tab between fields feature sometimes stop working at random. Right clicking the field and then left clicking (not on Paste menu) seems to work to allow writing in the field again. Sometimes this a
-
How to use Cinema4D lite with no opening After Effects CC ?
How to use Cinema4D lite with no opening After Effects CC ? Is that possible ? Open a 3D object Photoshop-type in After Effects CC (without C4D) It is also possible? thanks xav
-
Illustrator CS3/Photoshop CS3 - how do they work with MS XP64 and MS Vista64?
I am building a new computer and am trying to decide whether to use XP 64 bit or Vista 64 bit. I currently have Adobe Illustrator/Photoshop CS3....but will surely upgrade to CS4 at some point. What is your recommendation for OS choices I've noted? An