ORA-19602 during backup of a RAC database with RMAN
Dear All,
We have an Oracle 10g database on a 2 nodes. This database is running in noarchivelog mode. While doing an offline backup of this database, we encountered ora-19602 errors. See below:
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:55
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/30/2009 09:56:10
ORA-19602: cannot backup or copy active file in NOARCHIVELOG modeBelow were the steps that we followed:
1. We stopped both instances using "srvctl stop instance -d test -i test1,test2"
2. We then "rman target /"
3. In RMAN, we "startup mount"
4. In RMAN, we "backup database;"
5. RMAN failed with the above errors
Can someone advice what went wrong? Thanks!
Hi..
1. We stopped both instances using "srvctl stop instance -d test -i test1,test2"
2. export oracle_sid=sid
3. We then "rman target /"
4. In RMAN, we "startup mount"
5. In RMAN, we "backup database;"
Changed step 2.
Also, from sqlplus can you check the
select name,open_mode from v$database;
select STATUS from v$instance;
Anand
Similar Messages
-
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
Hi All
Its my first time to use RMAN in our ERP EBSR12
our database version is 11g
Please help how to resolv and make successfully backup
RMAN> backup database;
Starting backup at 24-JAN-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 01/24/2011 11:18: 25
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
channel ORA_DISK_1: starting piece 1 at 24-JAN-11
channel ORA_DISK_1: finished piece 1 at 24-JAN-11
piece handle=/oracle/mybackup_db/PROD2/backupset/2011_01_24/o1_mf_ncnnf_TAG20110 124T111824_6msvw4cv_.bkp tag=TAG20110124T111824 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 01/24/2011 11:18: 25
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>
ThanksORA-19602: cannot backup or copy active file in NOARCHIVELOG modeIs your database in archivelog or noarchivelog mode?
How to Turn Archiving ON and OFF [ID 69739.1]
Please also see these docs/links.
ORA-19602 Using RMAN to Backup Database [ID 246183.1]
COLD RMAN backup fails: Ora-19602 even after SHUTDOWN IMMEDIATE and STARTUP MOUNT [ID 373828.1]
Backup & Recovery
http://www.oracle.com/pls/db112/portal.portal_db?selected=14&frame=#backup_and_recovery
Thanks,
Hussein -
RMAN Backup script for RAC Database..please suggest
Hi All,
I am currently working on backup policy for RAC Database for my client.The client requirement is to backup while database is shutdown(mount state).I have made below script and could any one please suggest what further things should I need to add with below rman script.
echo "Shutdown Database";date
srvctl stop database -d PROD
srvctl status database -d PROD
echo "Database shutdown on";date
echo "Mount Database ";date
srvctl start instance -d PROD -i "PROD1" -o mount
srvctl status database -d PROD
echo "Start Full Database Backup on";date
$ORACLE_HOME/bin/rman target / nocatalog <<EOF
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '/BACKUP/PRODBKP/%F';
run{
allocate channel c1 device type disk connect 'sys/******@node1-vip:1521/PROD';
allocate channel c2 device type disk connect 'sys/*****@node2-vip:1521/PROD';
backup format '/BACKUP/PRODBKP/PROD_df_%t_%s_%p.bak'(database);
backup format '/BACKUP/PRODBKP/archive_%t_%s_%p.bak' archivelog all;
copy current controlfile to '/BACKUP/PRODBKP/PROD.ctl';
delete noprompt obsolete;
release channel c1;
release channel c2;
exit
EOF
echo "RMAN Backup Finished on";date
echo "Shutdown Database";date
srvctl stop database -d PROD
echo "Start Database";date
srvctl start database -d PROD
srvctl status database -d PROD
Please share your experiences.
RegardsHi,
Some tweaks for your script.
echo "Shutdown Database";date
srvctl stop database -d PROD
srvctl status database -d PROD
echo "Database shutdown on";date
echo "Mount Database ";date
srvctl start instance -d PROD -i "PROD1" -o mount1. If you database does not shutdown properly , does your script stops the execution of next step?
2. configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '/BACKUP/PRODBKP/%F';(Why you need to configure this every time) ?
It's persistent at db level one time setting (until some other script changes the settings by other dba - else remove that - set the configuration at db level once for all)
- Pavan Kumar N
3. -
Database migration from non rac and non asm to RAC database with ASM
HI,
i have requirement to import one database ( db1) which running one node with out ASM and with out RAC , now i want to import that database with rman backup to another database ( db2) which running on different server with 3 node RAC and ASM ( disk group +DATA ) , can you please provide me the steps how i can migrate.? ( i have created db2 with dbca with RAC).
regards,
sriSri,
This could be done multiple ways. Simplest for you is to use DBCA:
http://download.oracle.com/docs/cd/B28359_01/install.111/b28264/cvrt2rac.htm -
Anybody using 11g RAC Database with OIM 9.1.0.2?
Hi,
We have poor performance problems with 11g RAC Database with OIM 9.1.0.2.
It looks like the issue could be because of RAC Ccluster.
Anybody using 11g RAC Database with OIM 9.1.0.2?
If so, What is the JDBC Driver r u using? Also what App Server (Weblogic or OAS etc) ?
Appreciate your input.
Regards
Vijay ChinnasamyWe are using weblogic 10.3. And I am sorry to tell you that we are yet to move to production.
We are planning to have Database in RAC, so i just thought of taking inputs from you.
can you tell me under what operations you face the poor performance issue?
For us the max no. of users in production is around 6k. So I am wondering how this RAC availability will affect the performance.
Thanks for sharing your inputs. -
Making single instance DB/ RAC Database with 2 instances
i created single instance DB , now i want to make it RAC DB with 2 instances. Need guidelines/Notes to do so.
Creating RAC Databases with the Database Configuration Assistant
10g Release 1 (10.1.0.3) for Linux x86-64
http://download-east.oracle.com/docs/html/B14406_01/dbcacrea.htm -
Trying to restore a database with RMAN in new server
Hello,
Database: Oracle 10gR2
O/S: Windows Server 2003
My RMAN backuppieces are stored in a network drive:
\\old_location\FULL
and
\\old_location\INC
I'm trying to restore a whole database with RMAN in another server from my FULL backup.
For that, I copy all backuppieces files
from: \\old_location\FULL
to new server: D:\new_location\
Also I created the relevant folder hierarchy under <ORACLE_BASE> directory, as follows:
a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>\admin' directory
b. Create <DATABASE_NAME> directory under '<ORACLE_BASE>\oradata' directory
c. pfile.ora and controlfile (CTL_MTDPROD_2308_20120401_1.CTL) are backup from original database and they are in D:\new_location\
d. I copied pfile.ora and controlfile to folder: C:\oracle\product\10.2.0\db_1\database\
I started creating an instance in new server from scratch:
C:\>oradim -new -sid MTDPROD -intpwd mtdprod
C:\> SET ORACLE_SID=MTDPROD
C:\> rman
RMAN> connect target sys
RMAN> SET DBID=21692876873
RMAN> STARTUP force nomount PFILE=C:\oracle\product\10.2.0\db_1\database\init_mtdprod.ora
RMAN> restore controlfile from 'C:\oracle\product\10.2.0\db_1\database\CTL_MTDPROD_2308_20120401_1.CTL';
RMAN> alter database mount;
#Since I want to read my backuppieces from D:\new_location and not from \\old_location\FULL then I catalog and restore like:
RMAN> catalog start with 'D:\new_location\';
RMAN> restore database;
Starting recover at 25/04/12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=541 devtype=DISK
channel ORA_DISK_1: starting incremental datafile backupset restore
channel ORA_DISK_1: specifying datafile copies to recover
recovering datafile copy fno=00003 name=D:\BD_MTDPROD\CONTROLFILES\SYSAUX01.DBF
recovering datafile copy fno=00004 name=D:\BD_MTDPROD\CONTROLFILES\USERS01.DBF
recovering datafile copy fno=00007 name=D:\BD_MTDPROD\DATAFILES_DATA\MSE.ORA
recovering datafile copy fno=00010 name=D:\BD_MTDPROD\DATAFILES_DATA\EXPEDIENTES2.ORA
channel ORA_DISK_1: reading from backup piece \\old_location\FULL\FULL_MTDPROD_20120401_2304_1.BAK
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: failover to piece handle=D:\new_location\FULL\FULL_MTDPROD_20120401_2304_1.BAK tag=TAG20120401T190004
.....(continues)
Questions:
1. RMAN still reads from old_location. The only way to avoid that would be deleting all files from \\old_location\FULL ?
2. The message "failover to piece handle=D:\new_location\...." indicates that that file is not usefull? I just copy them from old_location to new_location... how can they get useless?
I suspect there is something in controlfile that redirects to \\old_location\FULL\ and doesn't let to read from D:\new_location\
Please, advice.user521219 wrote:
Questions:
1. RMAN still reads from old_location. The only way to avoid that would be deleting all files from \\old_location\FULL ?
2. The message "failover to piece handle=D:\new_location\...." indicates that that file is not usefull? I just copy them from old_location to new_location... how can they get useless?
I suspect there is something in controlfile that redirects to \\old_location\FULL\ and doesn't let to read from D:\new_location\Is this a cold backup? Did you change the location of control file in your PFILE or is it still pointing to old location?
You may want to check the output of RESTORE DATABASE PREVIEW command, which will just report which backup files it uses without actually restoring thhe DB. -
Creating a Data Guard Database with RMAN in 10&11g
I found this notes for 9i, looking for same for 10g & 11g
183570.1 Creating a Data Guard Database with RMAN (Recovery Manager) using Duplicate CommandThese notes just show duplicating dbs without datagurd, i am looking for Creating a Data Guard DB with RMAN in 10 &11g.
-
Creating RAC database thru RMAN hot backup
Hi Guys,
I am having ERP PROD database on 2 nodes 116 and 117(RAC) server. We have a scheduled RMAN HOT backup of this database
WE also have ASM implemented.
We have another 2 servers named 36 and 37(RAC and ASM) which has ERP Test Database and the thing is that we want to refresh this
test database using ERP PROD RMAN backup.
Can someone please post the proper steps to restore the RMAN backup to ERP Test database as ASM is alos there.
As it is little urgent for us.
help will be appreciated.
Regards,
Milan Rathod1. take the backup of production database
rman connect target /
backup as compressed backupset database plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
move the backup to test server (same location /u01/db/backup/ bcoz rman checks for backupset in the same location only)
add the below two lines in the test database-- initTEST.ora file
comment cluster_ parameters in initTEST.ora file
eg:-
DB_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
LOG_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
check the connectivity between prod and test database.
from test
$tnsping PROD
from prod machine
$tnsping TEST
in test server
startup nomount
rman target sys@proddb auxiliary /
duplicate target database to test;
after completion of duplicate/clone step convert the single instance test to rac instance by uncomment the cluster_ parameters in initTEST.ora parameter
startup mount the second node in TEST
ALTER DATABASE ENABLE PUBLIC THREAD 2 ;
alter database open;
hope, this will helps you.
Good Luck -
Building RAC database thru RMAN backup
Hi Guys,
I am having ERP PROD database on 2 nodes 116 and 117(RAC) server. We have a scheduled RMAN HOT backup of this database
WE also have ASM implemented.
We have another 2 servers named 36 and 37(RAC and ASM) which has ERP Test Database and the thing is that we want to refresh this
test database using ERP PROD RMAN backup.
Can someone please post the proper steps to restore the RMAN backup to ERP Test database as ADM is alos there.
As it is little urgent for us.
help will be appreciated.
Regards,
Milan Rathod1. take the backup of production database
rman connect target /
backup as compressed backupset database plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
move the backup to test server (same location /u01/db/backup/ bcoz rman checks for backupset in the same location only)
add the below two lines in the test database-- initTEST.ora file
comment cluster_ parameters in initTEST.ora file
eg:-
DB_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
LOG_FILE_NAME_CONVERT = (+EBAOUATDATADG1/prod/,/u01/db/app/admin/test/)
check the connectivity between prod and test database.
from test
$tnsping PROD
from prod machine
$tnsping TEST
in test server
startup nomount
rman target sys@proddb auxiliary /
duplicate target database to test;
after completion of duplicate/clone step convert the single instance test to rac instance by uncomment the cluster_ parameters in initTEST.ora parameter
startup mount the second node in TEST
ALTER DATABASE ENABLE PUBLIC THREAD 2 ;
alter database open;
hope, this will helps you.
Good Luck -
RMAN backup in ORACLE RAC database
Hi there,
We are using RMAN backup strategy for taking backups from one node(eg.node1).Database is RAC database, version 9.2.3. and OS is Solaris 5.10.
this is the configuration which we use, as follows:
Connecting to Prod.Database using catalog database.
rman catalog=rman/rman@CATDB target=sys/oracle@PRODDB(node 2).
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 30;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rmanback/_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 5;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rmanback/CMWPROD_%s.bak';
CONFIGURE CHANNEL 2 DEVICE TYPE DISK CONNECT 'SYS/oracle@PRODDB(node2)';
CONFIGURE MAXSETSIZE TO 7 G;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/9.2.3/dbs/snapcf_CMWPROD1.f';
As the above config shows RMAN is connecting to PROD DB (node 2). But we need to take backups (datafiles and as well as archive logs) from two nodes (i.e from node 1 and as well as node 2).
Is there any possibility for taking backups from two nodes?
Thanks,
Balu.Duplicate thread
RMAN configuration in ORACLE RAC database
Khurram -
How to create new database with rman backup
hi,
i took a rman backup with nocatelog. can i make a new database with that rman backup.
if yes then how ? i m using oracle 9i.
thxs'NEW' doesn't seem to be the right word here, but you can DUPLICATE (clone) an existing database or restore it to a new host:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/toc.htm
Werner -
Not able to connect to RAC Database with VIP entries
Hi All,
My RAC database run with Physical Host entries in listener and tnsnames files.
But VIP services are running in both nodes.
Now i want to use VIP enties to connect to the RAC database from client side.
I have modified the both the listener and tnsnames files with VIP entries and bounced the instance.But It didn't work.
Please suggest what could be done in this issues.Hi,
It is 10.2.0.3 and remote_listener is set to LISTENER_Hostname and Remote listener is configured.
Thanks -
Refresh new created RAC databases with expdp dmp got SCN error
Hi, I did expdp full on a single instance database on AIX and scp to the new created LINUX RAC databases and ran a impdp full.
However I saw the following error:
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Cannot set an SCN larger than the current SCN. If a Streams Capture configuration was imported then the Apply that processes the captured messages needs to be dropped and recreated. See My Oracle Support article number 1380295.1.I checked support.oracle.com, that note is not existed.
Can anybody help me ? I would like to know if this is the error I can ignore.
Thanks in advance.What user was used to perform expdp and impdp ? Pl note that "/ as SYSDBA" should not be used. Pl see the first "Note" sections here
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1012781
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_import.htm#i1012504
HTH
Srini -
Problem creating physical Standby database with RMAN
Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again
Maybe you are looking for
-
Interfacing of Barcode with SAP 4.6c & IS Cable system
Dear PP Grus! Client has been using SAP system (4.6 C with IS Cable Solution) since long. They want to interface Barcode system in such a manner that, at the time of GR (some time automatic or some time normal) for production order, system will auto
-
Pdf files opening up way to large by default in adobe reader
I am wondering if anyone has had the issue with pdf's opening up like 300% way to big by default? I have a customer who says that when ever he opens a pdf he can't even read it because it is toooo large. Any suggestions to help him work it out would
-
Shopping Cart TabStrip is MIA (missing in action)!
The shopping cart tabs have all disappeared and I cannot find the control to bring them back!! Details When you logon to the SRM portal and go to the Shopping Cart (Employee Self-Services tab) you are shown two icons: Shopping Cart and Advanced Sear
-
Hi all, I'm using BO 4.0 and I have once succeed to make Bex query as source on WebI, but next it always turned into error : The DSL Service returned an error: com.businessobjects.dsl.services.datasource.impl.DataSourceException$UniverseGenerationFai
-
How to uninstall broken app (DropBox) from iPad
Hi, I tried to install Dropbox on my iPad Air but I don't think it installed properly as the icon never appeared on the home screen. If I look at dropbox in Apps it says it is installed, but if I click the open button it doesn't do anything. I assume