ORA-23320 a missing DDL record for REPCATLOG record

To generate replication support for TRIGGERS (Multi master Replication Scenario).
When I tried to generate the replication trigger to update TIMESTAMP field in a table to resolve conflict, an error occurs (ora-23320).
I can register the trigger object but when i try to generate support through
dbms_repcat.generate_replication_support , it gives me the above mentioned error.
at the same time, i am able to generate support for the table objects .
Kindly give me a suggession.

Thank you for the suggestion..
Here the object got registered at all master sites, as trigger itself got created at the other locations. I used following command to register the object..
DBMS_REPCAT.CREATE_MASTER_OBJECT(..)
But still generation of replication support raise the error mentioned.
Please notify if any sort of other errors..

Similar Messages

Missing Delta Records for 2LIS_02_ITM & SCL

Hi Experts,
this is how my problem goes.
i have done my set up table filled on 12th Dec 2010 and from that time onwards the delta were running everyday and filling the DSO and Cube.
Accidently by some others PC in prod all my delta loads and the setup table load is being deleted except yesterday in PSA for these 2 extractors and now because of some change i have to do a full load to DSO.
But as the PSA is emply and have only yesterday's request i have, deleted that one as well and done a Init Delta to it and i found out that only the Set up table is comming now and all the deltas in between are missing.
i have tried a full LOAd to PSA and the result is same.
How can i get those missing delta records from 12th Dec last year till today with out doing another set up table fill or Do i have to have fill the set up table again till today and thats the only way? i will set the delta again after that.
Do we have to have all the user locked for the setup table fill (for Queued Delta type) ? Lot of people says yes you have to and others says no you don't require. i got one white paper and it clearly says no user locking is required. please find the link below. what is the correct way?
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d019f683-eac1-2b10-40a6-cfe48796a4ca?quicklink=index&overridelayout=true]

Hi,
As per my knowledge you want load particular period of data try repair request may issue solve.
Regards
Sivaraju

Error in PA40: missing secondary record for infotype 0001

Hi Experts,
while changing the job code of employee i am getting below error in the PA40 transaction for IT0001 .
Error : missing secondary record for infotype 0001 Key
could you please tell me why this message is coming.
Advance thanks,
Regards
Ram

Hi,
Please check out whether any user exits are maintained.
Check ZXPADU01/ZXPADU02 includes.
Please also check out whether there are dynamic actions configured for IT0000 and IT0001 via V_T588Z.
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Dec 16, 2009 3:19 PM

ORA-09100 specified length too long for its datatype with Usage Tracking.

Hello Everyone,
I'm getting an (ORA-09100 specified length too long for its datatype) (a sample error is provided below) when viewing the "Long-Running Queries" from the default Usage Tracking Dashboard. I've isolated the problem to the logical column "Logical SQL" corresponding to the physical column "QUERY_TEXT" in the table S_NQ_ACCT. Everything else is working correctly. The logical column "Logical SQL" is configured as a VARCHAR of length 1024 and the physical column "QUERY_TEXT" is configured as a VARCHAR2 of length 1024 bytes in an Oracle 11g database. Both are the default configurations and were not changed.
In the the table S_NQ_ACCT we do have record entries in the field "QUERY_TEXT" that are of length 1024 characters. I've tried various configuration such as increasing the the number of bytes or removing any special character but without any sucess. Currently, my only possible workaround is reducing the "Query_Text" data entries to roughly 700 characters. This makes the error go away. Additional point my character set to WE8ISO8859P15.
- Any suggestions?
- Has anyone else ever had this problem?
- Is this potentially an issue with the ODBC drive? If so, why would ODBC not truncate the field length?
- What is the maximum length supported by BI, ODBC?
Thanks in advance for everyones help.
Regards,
FBELL
*******************************Error Message**************************************************
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 910, message: ORA-00910: specified length too long for its datatype at OCI call OCIStmtExecute: select distinct T38187.QUERY_TEXT as c1 from S_NQ_ACCT T38187 order by c1. [nQSError: 17011] SQL statement execution failed. (HY000)
SQL Issued: SELECT Topic."Logical SQL" saw_0 FROM "Usage Tracking" ORDER BY saw_0
*******************************************************************************************

I beleieve I have found the issue for at least one report.
We have views in our production environment that call materialized views on another database via db link. They are generated nightly to reduce load for day-old reporting purposes on the Production server.
I have found that the report in question uses a view with PRODUCT_DESCRIPTION. In the remote database, this is a VARCHAR2(1995 Bytes) column. However, when we create a view in our Production environment that simply calls this materialized view, it moves the length to VARCHAR2(4000).
The oddest thing is that the longest string stored in the MV for that column is 71 characters long.
I may be missing something here.... But the view that Discoverer created on the APPS side also has a column length for the PRODUCT_DESCRIPTION column of VARCHAR2(4000) and running the report manually returns results less than that - is this a possible bug?

ORA-00060: deadlock detected while waiting for resource CLOSE cursor

Hi,
I am a new member of this forum. I am working with a problem we got a few weeks ago. It is from a Pro C batch executable running on 10 threads dealing with >800 data accessed from multiple tables. The error as reported came from a package.function call.
This is the error I encountered:
process_item~G****, D***~-60~ORA-00060: deadlock detected while waiting for resource~PACKAGE ERROR = CLOSE cursor C_***** in package R***.I*** 7641
The cursor is a simple SELECT cursor without Table or Record locking.
My questions are:
*Upon the occurrence of this error, is the execution already at the CLOSE cursor line or did the error occurred between the OPEN cursor and the CLOSE cursor? There are several lines of code in between OPEN and CLOSE:
- one that calls for a package.function that simply stores parameter values to a variable
- another one which fetches the cursor. The group that holds the cursor values is only used by a single function in the package
*Is it possible for this CLOSE cursor to cause a deadlock? What could have caused this?
*From what I know, Oracle deals with deadlocks by aborting the deadlocking process while others continue, but this deadlock caused our program to hang. How is this possible? Could the root cause of the deadlock be from our threading program? This is a rare occurrence and happened only twice this year.
Thanks,
Raf

Raf Serrano wrote:
Hi,
I am a new member of this forum. I am working with a problem we got a few weeks ago. It is from a Pro C batch executable running on 10 threads dealing with >800 data accessed from multiple tables. The error as reported came from a package.function call.
This is the error I encountered:
process_item~G****, D***~-60~ORA-00060: deadlock detected while waiting for resource~PACKAGE ERROR = CLOSE cursor C_***** in package R***.I*** 7641
The cursor is a simple SELECT cursor without Table or Record locking.
My questions are:
*Upon the occurrence of this error, is the execution already at the CLOSE cursor line or did the error occurred between the OPEN cursor and the CLOSE cursor? There are several lines of code in between OPEN and CLOSE:
- one that calls for a package.function that simply stores parameter values to a variable
- another one which fetches the cursor. The group that holds the cursor values is only used by a single function in the package
*Is it possible for this CLOSE cursor to cause a deadlock? What could have caused this?
*From what I know, Oracle deals with deadlocks by aborting the deadlocking process while others continue, but this deadlock caused our program to hang. How is this possible? Could the root cause of the deadlock be from our threading program? This is a rare occurrence and happened only twice this year.
Thanks,
RafSELECT (without FOR UPDATE) statements are never involved in ORA-00060.
only DML statements throw ORA-00060 error

What is a missing thread record (id = 3339624) and what can I do about it?

I was trying to updat my IMac to snow leopard and got an error during the process. I restarted my computer on the HD that I was trying to update and I get the boot screen and then it turns off. I then got it to boot on the SL disk and it got me to the repair prompt and the DU. When I verify the HD I get missing thread record (id = 3339624) and It grays out the HD. After restarting and getting back to the DU I can see it again and all my files on it. I no longer care about updating I just want to be back to normal. I don't have any time machean backups and I am very worried. It makes it even worse being able to see my files but not be able to get to them.

That error message means that Disk Utility can't reconcile the catalog entry for a file and it's location on the hard drive. That could mean a problem with the file or a problem with the catalog.
Verifying the hard drive doesn't fix anything, it just reports it's status. You need to boot to either your Leopard or Snow Leopard DVD, bring up Disk Utility, and repair the hard drive. If Disk Utility gives a failure on exit message or tells you it can't repair the hard drive, then you'll need to use a program like Disk Warrior or TechTool Pro, with Disk Warrior being the program most people use. That should be able to fix the problem. Disk Warrior is available from http://www.alsoft.com/diskwarrior/
If you started a major operating system upgrade without having a backup, you're setting yourself up for failure should a problem arise, but you probably know that by now.

Disk Utility and fsck report 'missing thread records' and can't repair.

Hello,
What first made me realise there was a problem with my iMac was that when I tried to update a application it failed. I then manually download the .dmg of the update and tried replaced the app (Transmission 1.82 being that app in question). This failed, OS X claiming that it could not replace the older version (1.81). I then tried copying the file to the desktop where OS X claimed that there was already a copy of the application and so left a corrupted file on my desktop. This also happened when i attempted to move and copy a couple of pages documents and movie files around. I decided the best thing to do at this point was to reboot my computer; OS X decided it needed to install a couple of security updates at this point. This installation failed.
My iMac booted up, but only after a progress bar has appeared under the Apple logo and spinner and has done its thing (From what I've read this means that OS X is trying its best to resolve some sort of errors). This happens upon every boot.
This made me think that something must be going on with the file system of my Mac so I ran all the tests in Disk Utility. Permissions repair ran fine and fixed a few issues, but when I verified the disk this is what it reported:
"Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 2045563)
Missing thread record (id = 2096282)
Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
I booted up from the DVD and tried to repair; this failed. Next I tried using fsck in single user mode; this also failed. Upon rebooting again and waiting for the progress bar to fill I was able to move files around and update Transmission without issue. Disk Utility still reports the same error.
If I boot into Windows Vista everything works perfectly; as of yet I haven't got around to installing the new Boot Camp update for Windows 7 support incase that changes anything. When running the diagnostic tool on the Windows Vista DVD it reports that everything is fine for Windows.
I really am at a loss for what to do next. All my data is backed up by Time Machine onto a Time Capsule as well as manually onto a FW external. I also made a clone of the Windows partition using the free app Winclone. Does anyone know anything I can do to fix this problem?
Thanks so much,
Sam.

I have been experiencing exactly the same problem here with my MacPro. Apple replaced the hard disk because it was reporting bad sectors. However even with the replacement hard disk I'm experiencing the "missing thread" issue again. I'm guessing its either a software issue that keeps recurring or a fundamental hardware issue. Is the disk controller part of the hard disk or the motherboard? I've never had hard disk problems like this before.
Here's my Disk Utility report from earlier today:
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 1067066)
Missing thread record (id = 1111528)
Missing thread record (id = 1196845)
Missing thread record (id = 1200621)
Missing thread record (id = 1260154)
Missing thread record (id = 1277166)
Missing thread record (id = 1285010)
Missing thread record (id = 1297257)
Missing thread record (id = 1316679)
Missing thread record (id = 1437800)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 155085 instead of 155095)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Missing directory record (id = 1437800)
Missing directory record (id = 1316679)
Missing directory record (id = 1297257)
Missing directory record (id = 1285010)
Missing directory record (id = 1277166)
Missing directory record (id = 1260154)
Missing directory record (id = 1200621)
Missing directory record (id = 1196845)
Missing directory record (id = 1111528)
Missing directory record (id = 1067066)
Look for missing items in lost+found directory.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume directory count
(It should be 155106 instead of 155096)
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume MacHD was repaired successfully.

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

IDOC in 51 status.Essential transfer parameters are missing in record

Hi All,
Essential transfer parameters are missing in record: 8701 000001
Message no. VL561
I am not understanding what is missing in the IDOC.
Please help me in resolving the issue.
Thanks,
Forum

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

ORA-13193: failed to allocate space for geometry

I am having problems indexing a point layer using Locator in 8.1.6. The errors are:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13200: internal error [ROWID:AAAFs9AADAAAB30AAg] in spatial indexing.
ORA-13206: internal error [] while creating the spatial index
ORA-13193: failed to allocate space for geometry
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 7
ORA-06512: at line 1
ORA-06512: at "MDSYS.GEOCODER_HTTP", line 168
ORA-06512: at line 1
The table has 2 columns:
POSTCODE VARCHAR2(9)
LOCATION MDSYS.SDO_GEOMETRY
I loaded the point data with sqlloader rather than geocoding, so this could be the root of my problem, maybe I've missed something obvious:
POSTCODE
LOCATION(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y, Z), SDO_ELEM_INFO, SDO_ORDINATES)
AB15 8SA
SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3858, 8075, NULL), NULL, NULL)
AB15 8SB
SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3864, 8077, NULL), NULL, NULL)
AB15 8SD
SDO_GEOMETRY(1, NULL, SDO_POINT_TYPE(3867, 8083, NULL), NULL, NULL)
I am trying to index using the following command, this is when I got the error:
SQL> execute geocoder_http.setup_locator_index('POSTCODE_POINTS', 'LOCATION');
User_sdo_geom_metadata has some metadata inserted with lat/long dimensions. My data is not in lat/long, so I updated this but still get the same error message.
Is it possible to use locator with data that's not in lat/long format?
Anyone got any ideas?
Thanks.

1) If Locator needs lat/long coordinates, can anyone suggest a good route to convert coordinates for example from British National Grid to lat/long?
2) Are there plans for Locator to be able to use data from other coordinate systems like Spatial can?

Essential Transfer Parameters Missing in record during Inbound IDOC process

Dear Gurus
We are creating a Inbound delivery in one system, we have made all the custom settings for IDOC processing for inbound and outbound idoc in both the systems. Upon the execution of inbound delivery, the system
During the Inound delivery processing, the outbound IDOC is successfully distributed. However in the receving system, the IDOC is not posted and it throws the below erroe\r
Essential transfer parameters are missing in record: 0180000055 000010 / Mess number 561 and message type E
We are using Outbound IDOC mess type DESADV basic type DELVRY01 process code DELV with FM IDOC_OUT PUT_DELVRY
In the receiving system message type DESADV , process code DELS, and FM IDOC_INPUT_DESADV1
What is that which is going wrong.
Please help me out
Thanks

Hello
To create inbound delivery from outbound delivery, use following setting -
Outbound idoc -
idoc type - DESADV01
message type - DESADV
Process code - SD05
FM - IDOC_OUTPUT_DESADV01
Inbound iDOC -
Message Type - DESADV
Process Code - DESA
FM - IDOC_INPUT_DESADV
Idoc Type - DESADV01

Essential transfer parameters are missing in record: 000001

I have been trying to create a delivery ( Type LB) trough ME2O and get
this error .
Essential transfer parameters are missing in record: 000001
Message no. VL 561
Diagnosis
Information necessary for this delivery is missing.
System Response
Depending on the category of the delivery being created, the system
needs the following transfer data:
Outbound delivery::::::::
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery::::::::::::::::::
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
Outbound and inbound deliveries from goods movements::::::
Plant and sales unit transfer data is always mandatory..
Please help me how to fix this issue.
Thanks in advance

hi,
Do check whether the below points are mentioned or not...
Outbound delivery
Shipping point
Sales organization
Distribution channel
Division
Material number
Delivery quantity
Ship-to party
Base unit of measure
Inbound Delivery
Base Unit of Measure
Conversion factors for converting base and sales units
Goods Receiving Point
If it is given here in the doc, then check whether these are getting saved into the table or not..
Tables are :
LIKP, LIPS, VTTP...
Hope it helps..
Regards
Priyanka.P

OWB9.0.4-- ORA-02049: timeout: distributed transaction waiting for lock

I'm running a simple mapping that copies all columns of data (using a filter on date for just current records) from one table in SQL Server into a staging table on my Oracle DW schema. It's using a dblink with transparent gateway for SQL Server, which works fine from SQL*plus.
The map is in default mode (bulk-failoverto-row) with bulk size and commit frequency = 1000.
The audit details show the first 1000 rows selected on the source, with an error on both the source and target tables:
Target--
ORA-02049: timeout: distributed transaction waiting for lock
Source--
ORA-01002: fetch out of sequence ORA-02063: preceding line from INTERGRATION@JXNSQL01
(INTERGRATION@JXNSQL01 is the dblink name)
Any ideas on how I can clear this up?
Thanks,
Paul

Hi,
After having upgraded to 9.0.4 (from 9.0.3) I'm running into exactly the same problems with some of my mappings. Actually I don't get any rows transferred from the mappings that fail.
Out of 7 mappings, 3 worked just liked before while the 4 others just keep on running until I cancel them and I then see the BUSY/ORA-02049 in the Audit Browser.
When comparing the mappings I see that the 3 that works all use some custom Procedures I have made.
The 4 that doesn't work are all very simple - one of them just loads all the content from a table with two columns in my source to another table with two columns in my target! Two of the other mappings that doesn't work includes some simple CASE-expressions.
Both my source and my target resides in a Oracle 9.2.0.3 database (not the same).
Regards,
Bent Madsen

ORA-02315: incorrect number of arguments for default constructor

I was able to register the XML schema successfully by letting Oracle creating the XML Types. Then when I try to execute the create view command the ORA-02315: incorrect number of arguments for default constructor is always raised.
I tried using the XMLTYPE.createXML but it gives me the same error.
Command:
CREATE OR REPLACE VIEW samples_xml OF XMLTYPE
XMLSCHEMA "http://localhost/samplepeak4.xsd" ELEMENT "SAMPLE"
WITH OBJECT ID (ExtractValue(sys_nc_rowinfo$, '/SAMPLES/SAMPLE/SAMPLE_ID')) AS
SELECT sample_t(s.sample_id, s.patient_info, s.process_info, s.lims_sample_id,
cast (multiset(
SELECT peak_t(p.peak_id, p.mass_charge, p.intensity, p.retention_time,
p.cleavage_type, p.search_id, p.match_id, p.mass_observed,
p.mass_expected, p.delta, p.miss, p.rank, p.mass_calculated,
p.fraction)
FROM peak p
WHERE s.sample_id = p.sample_id) AS PEAK107_COLL))
FROM sample s;
Can someone help me.
Thanks
Carl

This example runs without any problems on 9.2.0.4.0. Which version are you running? And which statement causes the error message?

Time machine restore: missing thread record

Hello everyone,
I recently upgraded from Lion to Mountain Lion. I did a clean install. I have been backing up with Time Machine to my Lacie Cloudbox NAS. My NAS requires authentication.
I am unable to restore my files. I have tried it during installation and with Migration Assistant. I can see my .sparsebundle through Finder and mount it (and see an inprogress with loads of folders inside of it). I am unable to copy the files directly to my desktop because of an permission warning.
From Windows I can see loads of files inside the bands-folder. They are all equal in size. I found a clue that maybe the most recent ones are corrupt, so I moved two days worth of them out from sparsebundle.
Disk utility says the drive needs to be repaired. I tried this, and got loads of errors. I there are so many of these that I have shortened the list below a lot. Please help me, all my valuable files are inside the .sparsebundle (510 gigs). I don't care about automation, I just want them out.
Verify and Repair volume “Time Machine Backups”
Checking file systemChecking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 381217)
Missing thread record (id = 383288)
Missing thread record (id = 383627)
Missing thread record (id = 384165)
Missing thread record (id = 384442)
Indirect node 380893 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951259)
(It should be 0 instead of 1951258)
Indirect node 380895 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951262)
(It should be 0 instead of 1951261)
Indirect node 380897 needs link count adjustment
(It should be 2 instead of 3)
Next ID in a hard link chain is incorrect (id = 1951265)
(It should be 0 instead of 1951264)
Indirect node 411674 needs link count adjustment
(It should be 1 instead of 3)
Orphaned file hard link (id = 1286100)
Orphaned file hard link (id = 1286101)
Orphaned file hard link (id = 1286119)
Orphaned file hard link (id = 1286120)
Orphaned file hard link (id = 1286121)
The volume Time Machine Backups could not be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

The backup disk image is corrupt. You might be able to repair it by holding down the option key and selecting Verify Backups from the Time Machine menu. But that may also result in a total loss of all backup data. Backing up to a third-party NAS is unsupported by Apple and unsafe. You should back up to a locally-attached storage device.

ORA-23320 a missing DDL record for REPCATLOG record

Similar Messages

Maybe you are looking for