ORA-27023: skgfqsbi: media manager protocol error

can some one please tell me what to do regarding this error, and how can i solve it. the result log is stated below...
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Oct 16 15:26:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: MOT (DBID=2759813257)
using target database control file instead of recovery catalog
RMAN>
echo set on
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '10162007032648';
4> restore controlfile validate from tag '10162007032648';
5> release channel oem_sbt_backup;
6> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 10/16/2007 15:26:50
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> allocate channel for maintenance type 'sbt_tape' ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ORA_MAINT_SBT_TAPE_1 channel at 10/16/2007 15:26:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> delete noprompt backuppiece tag '10162007032648';
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=125 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/16/2007 15:26:51
RMAN-06168: no backup pieces with this tag found: 10162007032648
RMAN> exit;
Recovery Manager complete.

Similar Messages

ORA-19511: Error received from media manager layer, error text:

Dear Concern,
When I am restoring the oracle 9i database by brtools for SAP ECC 5.0 the following error message appeared. Mention that, this is second time restoration. First time restoration was successfull. After that one of us change some permission in differerent folders and files in the hp-ux server. Now we facing the following problem. Please help me...
BR0449I Restore mode: ALL
BR0419I Files will be restored from backup: bechtawc.fnr 2010-01-08 20.00.06
BR0416I 100 files found to restore, total size 520901.781 MB
BR0424I Files will not be decompressed
BR0421I Restore device type: rman_util
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.21
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRRESTORE:
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.23
BR0554I Starting restore from full database backup using RMAN...
BR0278E Command output of 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog':
Recovery Manager: Release 9.2.0.1.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
RMAN> connect target /;
connected to target database: PRD (DBID=1654880374)
using target database controlfile instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN> 2> 3> 4> 5> 6> 7> 8>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on sbt_1 channel at 01/19/2010 16:19:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
HP-UX Error: 8324: Unknown system error
Additional information: 7110
ORA-19511: Error received from media manager layer, error text:
SBT error = 7110, errno = 8324, sbtinit: internal error - invalid argument(s)
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0279E Return code from 'SHELL=/bin/sh /oracle/PRD/920_64/bin/rman nocatalog': 1
BR0536E RMAN call for database instance PRD failed
BR0280I BRRESTORE time stamp: 2010-01-19 16.19.24
BR0556E Restore from full database backup using RMAN failed
Best Regards
Wahid

Hi,
It is mentioned that I already have done a restoration and recovery first time. But when I tried to do the same job I mean restoration in second time for a specific requiremnt I am getting the above error.
Our syestem info is:
DB: Oracle 9i
OS: HP-UX
Storage: EMC storage
Backup tools: Data protector 5.5
Please help me.
Regards
Wahid

RMAN media manager layer error

hi everybody ,
i have 9i runs on SLES9 . ın our company we use EMC Networker (Legato) to do our backups. last two day ı got error message ;
channel t1: starting piece 1 at 04-MAR-09
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 03/04/2009 02:14:29
ORA-19502: write error on file "DB_dOBASE_t680578323_u81k91j8j", blockno 6907393 (blocksize=512)
ORA-27030: skgfwrt: sbtwrite2 returned error
ORA-19511: Error received from media manager layer, error text:
asdf_output_section1() failed
xdr=0x0x3fa0100: bp=0x0x3fd3030: send_len=262144: type=12800: fhand=0x0x3fd30b0: wrapper=0x0x3fd30d0: directp=0x0x3fd30f0 (1:4:9)
how can i resolve this error ? why did i take this error ? thanks....
gundem

ORA-27030 skgfwrt: sbtwrite2 returned error
Cause
sbtwrite2 returned an error. This happens while writing a backup file during a backup operation.
Action
This error is returned from the media management software which is linked with Oracle. There should be additional messages which explain the cause of the error. This error usually requires contacting the media management vendor.

Roxio Media Manager 9 Error S32EVNT1.DLL Solution?

Hi!
I've just installed Desktop Manager with Roxio Media Manager 9 and when I go to open Media Manager it hangs up with the error:
S32EVNT1.DLL
related to the virtual device driver.
Suggestions?
Thanks!

Hi!
I've just installed Desktop Manager with Roxio Media Manager 9 and when I go to open Media Manager it hangs up with the error:
S32EVNT1.DLL
related to the virtual device driver.
Suggestions?
Thanks!

Media Manager - Runtime Error

When attempting to access the pictures on my 8130 through desktop manager v. 4.3, Media Manager, as I always do, I am getting a new error and it isn't allowing me to access the contents of my device. I am using XP. This is what the error window says:
"Microsoft Visual C++ Runtime Library
X Runtime Error!
Program: C:\program Files\Roxio\Media Manager 9\Mediamanager9.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the applications support team for more information.
OK BUTTON"
When you close that window another pops up that says:
"Microsoft Visual C++ Runtime Library
X Runtime Error!
Program: C:\program Files\Roxio\Media Manager 9\Mediamanager9.exe
R6025
- pure virtual function call.
OK BUTTON"
Roxi Media Manager is integrated with Desktop Manager and I don't know how exactly to proceed. Anyone that may be able to point me in the right direction, I would greatly appreciate.
Message Edited by ffejnosral on 06-09-2008 01:55 PM

I found a solution that has worked for me. I ran the install (450_b016_english.exe) and followed the prompts to modify the installation (I planned on removing Roxio/MM9 component). But before I did that, I ticked to install the 'certificate synchronisation' (copyright/private keys stuff I think) feature just to see what would happen. It went through the install, restarted the PC, and hey presto! all working. It did ask for a password to be set presumably for the synch certs thing to work.
I didn't like that so then I decided to rerun the install and untick/remove the certifictae thing (being curious to see if I would be back to MM9 errors), followed the prompts, restarted the PC and hey presto! still working.
This suggests that in my case MM9 couldn't work because of an essential but missing setting, component, registry change, or such like that is not reversed when Certs are uninstalled.
BTW - I had to use the full OEM installation file because the option from within installed programs in the control panel required the temporary .msi file that is created during installation and is cleaned out once completed.
Using BB DTM 4.5 / BB 8120 / Vista Biz PC (fully patched).
Mark
Pearl 8100 & 8120 on Orange | 4.5.0.5.52
BB DTM 4.5.075
nc6220 Pen M | Vista Biz 6.0.6000.20752

Media Manager Sequence Error when trying to archive video.

When we are done with a project we like to use media manager to consolidate only the used video (with handles) to save space.
This has never posed a problem until lately. On about five of the last projects when the media manager begins reconnecting media we get the following error:
"Sequence Error: Unable to add clip to sequence. Possible media limits problem in clip or sequence"
The only option is to abort so a new sequence is never created. Also, it will not tell me which clip caused the error. I tried moving everything into a new sequence and got the same error. Then I tried it without handles, then I tried it without deleting the unused media. I have also tried the projects on other computers (All 10.6.4, all FCP 7.02) All had the same error.
The only other reference to this error I can find deals with a multicam edit. None of these projects have any multicam edits.
Anyone got any ideas what is going wrong? I have tried to think if we are doing anything differently lately and the only thing i can come up with is using more of Tiffen's DFX filters.

May have found the solution. Short story: I think it was some weirdness trying to media manage a sequence with a freeze frame of a video clip. I have had some issues in the past with final cut handling freeze frames.
Long story and workaround is available here:
http://forums.creativecow.net/readpost/8/1096223

ORA-19511 Media Management Error

I am getting following error while taking the backup to tape using OSB:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on eps2_sbt channel at 02/22/2008 10:32:30
ORA-27192: skgfcls: sbtclose2 returned error - failed to close file
ORA-19511: Error received from media manager layer, error text:
shmcheck: The obtar process (pid=26769) communicating with SBT has terminated.
This might be because the job was cancelled elsewhere, or due to an internal error.
Please check the job transcript for more information.
ORA-19502: write error on file "0sj9beek_1_1", blockno 47105 (blocksize=512)
I have inserted a new tape so there is lot of space available on the tape. Tape is attached to the same box, so its only 1 box with admin, media and client roles.
The backup was working fine earlier on this box, this all started today itself and also the file system backup to tape using OSB is still working fine but not the RMAN backups, nobody changed anything in OSB or Database configurations.
Is it time to log the TAR or is there something else which I can check??
Daljit Singh

Usually, that kind of error message indicates that the OSB user (with associated os privilege) does not have os privilege to access SCSI devices (ie tape devices). Believe it or not this is a common problem, especially, for the DBA user which os rights don't always include access to tape devices.
OSB will always adhere to os privileges soooo if the os blocks a user, OSB will also block that user.
Donna

RMAN not retrying on media manager errors

Hi,
I'm using Oracle 10g, RMAN and TDPO (the TSM client for Oracle). I'm
trying to do a PITR to a non-production machine, but RMAN is intolerant
of any media manager problems that crop up, so things like this
ORA-19511: Error received from media manager layer, error text:
ANS1017E (RC-50) Session rejected: TCP/IP connection failure
and this
ORA-19511: Error received from media manager layer, error text:
ANS1314E (RC14) File data currently unavailable on server
result in an immediate 'failover to previous backup'. The first error
was caused by a transient network problem; I suspect the second was just
bad luck as the file was being reclaimed by the TSM server when TDPO
asked for it.
Both these errors would have gone away if RMAN had tried again, so is
there any way I can tell it to retry on error? If not, is there
something else I could do to improve the situation?
Thanks
Sandeep

I think I fixed your error in your other post. If you search these forums though, you will find that the media manager is not held in "HIGH REGARD" by users of every type of OS.
This is from the Microsoft Vista support page Roxio is listed :
http://support.microsoft.com/kb/947562/en-us
let me know if this helps!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

ORA-19511 when backup with rman (using NetBackup Media Manager)

Hello forum
I added new database hosts to NetBackup, tried to test backup of the first instance on one host, below is what I get - Do you know cause and solution? Backup from NetBackup master server can be performed without problems. Below you will find the output from sbttest too.
Thanks Casi
---------- rman log -----------
Recovery Manager: Release 10.2.0.3.0 - Production on Fri Mar 7 10:26:28 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: IARTS (DBID=2414804385)
connected to recovery catalog database
RMAN> run
2> {
3> allocate channel c1 DEVICE TYPE sbt PARMS='ENV=(NB_ORA_SERV=sksta00500.ksta.zh.ch,NB_ORA_CLASS=LX_ORA_ONL)';
4> backup current controlfile;
5> }
allocated channel: c1
channel c1: sid=110 instance=IARTS1 devtype=SBT_TAPE
channel c1: VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
Starting backup at 07-MAR-08
channel c1: starting full datafile backupset
channel c1: specifying datafile(s) in backupset
including current control file in backupset
channel c1: starting piece 1 at 07-MAR-08
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 03/07/2008 10:27:11
ORA-19506: failed to create sequential file, name="19jalk7t_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
VxBSAValidateFeatureId: Failed with error:
Server Status: file open failed
RMAN>
---- sbttest ---------------------------
$ORACLE_HOME/bin/sbttest /tmp/x.lst
The sbt function pointers are loaded from libobk.so library.
-- sbtinit succeeded
-- sbtinit (2nd time) succeeded
sbtinit: Media manager supports SBT API version 2.0
sbtinit: Media manager is version 5.0.0.0
sbtinit: vendor description string=VERITAS NetBackup for Oracle - Release 5.1 (2004122520)
sbtinit: allocated sbt context area of 8 bytes
sbtinit: proxy copy is supported
-- sbtinit2 succeeded
-- regular_backup_restore starts ................................
-- sbtbackup succeeded
Segmentation fault

Are you sure, you installed the proper media management software? Check it:
(1) cd to your $ORACLE_HOME/bin directory
(2) Type sbttest test
The sbttest is a standalone program which test to see if the MML(Media
Management Layer) software is installed and can accept a data stream and return
an identical data stream.
sbttest will return 0 which indicates success or 1 which indicates an error has
occurred. An error means it's not an Oracle problem.

ORA-28040: No matching authentication protocol in version 11.2.0.3

Hi,
I am working on database server 11.2.0.3 and the OS is linux 86 bit. i created an entry in sqlnet.ora file with
SQLNET.ALLOWED_LOGON_VERSION = 10
it is failing with ORA-28040: No matching authentication protocol error and i am not able to connect as sys till I comment the entry. How do i set this entry and where in the client side do I need to set this entry? Also, do I have to set it to SQLNET.ALLOWED_LOGON_VERSION = 11 instead? I am confused. Please help
thanks a lot.

Hello;
Any chance you are using a JDBC driver?
Try changing it to : ( Workaround )
SQLNET.ALLOWED_LOGON_VERSION=8
OR = 9
This is an old bug if I remember correctly.
Bug 8730787
Best Regards
mseberg
Added to mine, but I'm unable to recreate the error. Using Oracle 11 client.
Found this
Action:     Administrator should set SQLNET_ALLOWED_LOGON_VERSION parameter
     on both client and servers to values that matches the minimum
     version supported in the system.
Edited by: mseberg on Feb 16, 2012 12:34 PM
Edited by: mseberg on Feb 16, 2012 12:36 PM

Error: ORA-12560 TNS : Protocol Error help need urgently

HI
i m working on win 2k adv server
i installed orcale 8i
and then i started sql plus
and entered us id and pass : scott / tiger
and also tried :system / manager
but i m having this error
plz tellme how can i solve it
Error: ORA-12560 TNS : Protocol Error
plz do it soon
Nurali
03002199037

You're attempting to go across SQL*Net. I'm a unix guy so I can't help very much except to point this out.
On Unix I'd either undefine the TWO_TASK environmental variable. Probably a reg entry on 2k.
Or configure Sql*Net.
Ken

ORA-27211: Failed to load Media Management Library after Update to HP DP 6

Hi,
after an Upgrade to Version 6.0 from the Backupsoftware HP Dataprotector i can't run RMAN Backup's anymore, because something is wrong with Linking of the MML.
BS: SLES 8 / Kernel 2.4.21-251-smp
Oracle: 9.2.0.5
I try this RMAN Statement:
RMAN> run
2> {
3> allocate channel 'c1' device type sbt_tape
4> PARMS='SBT_LIBRARY=/opt/omni/lib/libob2oracle8.so';
5> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 10/22/2007 16:04:24
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
the tracefile (i try RMAN Test with and without PARM Parameter):
Dump file /u01/app/oracle/product/9.2.0/rdbms/log/khv_ora_11745.trc
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: Linux
Node name: dbtheresien3
Release: 2.4.21-251-smp
Version: #1 SMP Thu Sep 23 17:22:54 UTC 2004
Machine: i686
Instance name: KHV
Redo thread mounted by this instance: 1
Oracle process number: 35
Unix process pid: 11745, image: oracle@dbtheresien3 (TNS V1-V3)
*** SESSION ID:(72.47988) 2007-10-22 15:53:24.684
Failed to load SBT library libobk.so
*** 2007-10-22 15:57:35.736
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 15:58:16.009
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
*** 2007-10-22 16:02:46.904
Failed to load SBT library libobk.so
*** 2007-10-22 16:04:24.761
Failed to load SBT library /opt/omni/lib/libob2oracle8.so
All Infos i found tells me:
- that i doesn't need to restart the Instance of the Database
- i must only remove the old link in $ORACLE_HOME/lin/libobk.so and take a link new link $ORACLE_HOME/lin/libobk.so to the new Backuplibrary in /opt/omni/lib/libob2oracle8.so
But this doesn't work!
Any usefull Hints?
I always try the RMAN Command's:
CONFIGURE DEVICE TYPE 'SBT_TAPE' CLEAR;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' clear;
Nothing help...
My last Idea ist to reboot the whole Database, but this is a little difficult 8-)

hi,
all Systems are 32 Bit (Database Oracle 9.2.0.5 and DP6.0).
What do you mean with "what is Version DP6" ?
HP Dataprotector 6.0 with Patch DPLNX_00013
thx
Thomas

Error message when trying to use vcast media manager

I recently downloaded the VCast Media Manager but have been unable to transfer any media from my computer or from my Thunderbolt. I tried signing in to VCast Media Manager on my phone and received an error message:
Server Problem
Abnormal situation code: err_conn/ont-api-vip.newbay.com
Unsure where to go from here. Thanks for any suggestions.

Hello,
Thank you Community Members for providing a troubleshooting tip. It is very much appreciated. First, you want to make sure that your system meets the minimum requirements, which can be viewed at the link below:
VCAST Media Manager Specs
Next, uninstall the VCAST application and reboot your computer.
Then, disable your firewall and antivirus program and download the VCAST Media Manager application again, which can be found at the web link below:
VCAST Media Manager
If you are still having trouble with this service, it will be necessary to contact our Technical Support team directly. Please call 1-800-922-0204, option 3, from an alternate phone and be in front of your computer if you need to call.
Thank you.
KellyW@VZWSupport

Error Message while trying to open media manager

When I try to open the media manager on the Blackberry Desktop Manager for my Storm, a window opens with the following:
Microsoft Visual C++ Runtime Library
Runtime Error
c:\programfiles\roxio\mediamanager9\mediamanager.exe
This application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
When I click OK, another window opens up with:
c:\programfiles\roxio\mediamanager9\mediamanager.exe
R6025
-pure virtual function call
Does anyone know what is happening here?
Thanks.

you need a microsd card and not a sd card. the microsd card is 1/4 size of the SDcard.
after the memory card has been formatted, you can then move the pictures from the internal memory of the Blackberry to the memory card.
And then with a card reader or the blackberry, access your memory card with Windows Explorer.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

ORA-12560-TNS PROTOCOL ERROR

SIR,
i hadbeen installed oracle aplication server.but i m not connecting to database.when i use the sql*plus.i use the user name-scott &password-tiger.i got an error ORA-12560=TNS PROTOCOL ERROR.
I M NOT ABLE TO RECTIFY ITS PROBLEM,how can i create host string in oracle application server 10g.please send reply its very urgent.
thanx ranjeet

Although this question is completely off topic of the Personalization you can learn how to configure the SQL*Net connect from the manual by reading the topic "Configure the Client to Use a Net Service Name" found at the following link:
http://download-west.oracle.com/docs/cd/A91202_01/901_doc/network.901/a90154/gettings.htm#483215

ORA-27023: skgfqsbi: media manager protocol error

Similar Messages

Maybe you are looking for