ORA-27302: failure occurred at: skgpspawn

In the alert log I see lot of following errors :
Process J000 died, see its trace file
Process m000 died, see its trace file
In past I experienced database crash after these error messages appeared in alert log. Any help is appreaciated.
Sanjoy

ORA-27302 failure occurred at: string
Cause: Operating system call error.
Action: Contact Oracle Support Services.

Similar Messages

Solaris installation - ORA-27302

Hi,
I was trying to install the Oracle Collaboration Suite on a Solaris box. During the Information storage, I got the following error in the Oracle Database Configuration Assistant:
ORA-27302: failure occured at: skgpwreset1
ORA-27303: additional information: invalid shared ctx
ORA-27146: post/wait initialization failed
ORA-27300: OS system dependent operation: semget failed with status: 28
ORA-27301: OS Failure message: No space left on device.
ORA-27302: failure occured at: sskgpsemsper.
The disk for Oracle is total 27 GB and still have 14 GB free space.
I have inserted the sample setting stated in the Table 2-19 to /etc/system and installed the patch clusters.
Anyone has any clue about this problem?

Most probably you have run out of 'inodes' - check the documentation for the kernel parameter settings like max open files, ulimit etc etc
hope this helps
Gavin This helps! Thanks Gavin!

Multiple ORA-27300, ORA-27301 and ORA-27302 in alert log

Hello all,
Looking for some guidance with a 10.2.0.1 database on Windows 2003 Enterprise Edition server. I have an SR open with Oracle, but getting the usual run-around and no conclusive explanations.
A couple of weeks ago, the database started throwing the following in the alert log:
Errors in file d:\oracle\admin\hdprd\bdump\hdprd_cjq0_404.trc:
ORA-27300: OS system dependent operation:WaitForSingleObject failed with status: 0
ORA-27301: OS failure message: The operation completed successfully.
ORA-27302: failure occurred at: sssxcpttcs5
Checking the trace file shows:
*** 2011-03-22 17:37:21.391
*** SERVICE NAME:(SYS$BACKGROUND) 2011-03-22 17:36:53.890
*** SESSION ID:(327.1) 2011-03-22 17:36:53.890
Waited for process J000 to initialize for 60 seconds
*** 2011-03-22 17:37:21.391
Dumping diagnostic information for J000:
OS tid = 3620
Memory (Avail/Total): Ph:6548M/8190M, Ph+PgF:10684M/12074M, VA:994M/2047M
CPU Load: 5%
------------------- Call Stack Trace ---------------------
calling location entry point arg #1 arg #2 arg #3 arg #4
7C82847C 00000000 00000000 00000000 00000000 00000000
77E41A89 77E64849 00000000 00000000 00000000 00000000
_slxefo+154                                                      00000000                                                         00000000 00000000 00000000 00000000
slxcfot+805                                                     slxefo+0 00000000 00000000 00000000 00000000
lxlfopn+128                                                     slxcfot+0 412dd744 412dd98c 60b2c20c 60b2c208
lxldlod+56                                                      lxlfopn+0 60b382dc 412dd98c 00000000 00000000
_lxdlobj+79                                                      00000000                                                         60b382dc 412dd98c 0a4957f0 00000001
lxdgetobj+187                                                   lxdlobj+0 00000001 00000000 0a49df34 00000000
lxplset+49                                                      lxdgetobj+0 00000000 00000000 00000000 00000000
lxhLaToId+146                                                   lxplset+0 00000001 0a49dd14 0a49df34 00000000
lxhenvquery+197                                                 lxhLaToId+0 00000000 00000000 00000000 00000000
lxhLangEnv+352                                                  lxhenvquery+0 00000000 00000000 00000000 00000000
62747F74 62765084 0a49dd14 00000000 0a49df34 0a49df34
60987803 60A35104 00000000 00000000 00000000 00000000
60986EEE 60986EFC 3b512c78 412df6b4 412dfd84 00000100
6098798C 60986ED8 3b512c78 412df6b4 412dfd84 00000100
npinli+78                                                       nlstdgo+0 00000000 00000000 00000000 00000000
opiinit+142                                                     npinli+0 00000001 00000000 00000000 00000000
opimaireal+194 _opiinit+0                                                       00000000 00000000 00000000 00000000
opimai+92                                                       opimai_real+0 00000003 412dfeec 00000000 00000000
BackgroundThreadStart@4+422                                     opimai+0 00000000 00000000 00000000 00000000
77E6482C 00000000 00000000 00000000 00000000 00000000
---------------- End of Call Stack Trace -----------------
Call stack acquisition performance stats:
setup time (lock acquis., memory alloc.): 0 ms
frame get time (time the target proc was suspended): 0 ms
symbol translation time: 157 ms
total time: 157 ms
The database remains functional while this is happening, but we are no longer able to establish new sessions to the database. The only remedy so far, as is the case with most Windows issues, is to reboot the server. The support analyst has recommended that we add the "/3gb" switch to the boot.ini as he feels we are hitting the 2GB limitation for a single process. My concern is that in looking at the trace file, it would appear that there's only around 1.6GB of memory consumed in total on the server (8190M - 6548M = 1642M), so there should be no single process that's coming even close to the 2GB limitation. I've been watching the oracle.exe process for the last week, and it always hovers around 700M. The total SGA size is about 600M.
Interestingly enough, we're in the process of downgrading the database from Enterprise Edition to Standard edition and on the development server, we've currently got the old 10.2.0.1 EE database and the new 10.2.0.5 SE database running concurrently. The EE version has encountered the same issue described above, while the SE version has not.
My other problem is that I work in the pharmaceutical industry and this is a heavily regulated database and I cannot make arbitrary changes to databases/servers without evidence to support the change.
Any Oracle/Windows experts out there that can shed some light on this problem?
Thanks

Thanks to both of you for the speedy response. I have already seen that article, as well as 790397.1 - PROCESS J000 And M000 Die [ID 790397.1]. I'm just a little confused as to why Oracle is saying it's an out of memory condition when there's nothing in the log or trace files (other than the condition matches a couple of articles they have) that support the conclusion. Don't get me wrong, I'm certainly not an Oracle on Windows expert, most of my stuff revolves around Linux/UNIX and I avoid anything windows like the plague, other than starting a putty session.
My understanding is that each process in a windows 32bit environment gets a 4GB Virtual Address Space, which is split into a lower 2GB application space and an upper 2GB kernel space. If the trace file is showing that only 1.6GB of physical memory has been consumed, wouldn't this indicate that there isn't a single process on the server that is even close to reaching it's 2GB limitation?

ORA-27300 27301 ORA-27302

Hi ,
Running Oracle DB(10.2.0) Server on Solaris 10. the server refused connections for 5 minutes yesterday and I checked logs through EM webpage :
Found following : Alert.log
Feb 5, 2009 9:39:15 PM
ORA-27300: OS system dependent operation:fork failed with status: 12
ORA-27301: OS failure message: Not enough space
ORA-27302: failure occurred at: skgpspawn3
Trace File:          /u01/app/oracle/admin/devee/bdump/devee_psp0_28194.trc
Feb 5, 2009 8:14:41 PM
ORA-27300: OS system dependent operation:fork failed with status: 12
ORA-27301: OS failure message: Not enough space
ORA-27302: failure occurred at: skgpspawn3
Trace File:          /u01/app/oracle/admin/devee/bdump/devee_psp0_28194.trc
, I connected solaris 10 using ssh and checked processes, one of the user process was taking around 8G memory.
also one of oracle process is defunct :
ps -auxwww | grep 7714 --
oracle 7714 0.0 0.0 0 0 Z 0:00 <defunct>
ptree--
28192 ora_pmon_devee
28194 ora_psp0_devee
7714 <defunct>
28196 ora_mman_devee
I killed the user process and then it freed up the memory but oracle process is defunct , I don't know if it is related to this issue at all.
cat /u01/app/oracle/admin/devee/bdump/devee_psp0_28194.trc
/u01/app/oracle/admin/devee/bdump/devee_psp0_28194.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/Db_1
System name: SunOS
Node name: abc.abc.com
Release: 5.10
Version: Generic_118833-24
Machine: sun4u
Instance name: devee
Redo thread mounted by this instance: 1
Oracle process number: 3
Unix process pid: 28194, image: [email protected] (PSP0)
*** SERVICE NAME:(SYS$BACKGROUND) 2009-02-05 20:14:41.719
*** SESSION ID:(169.1) 2009-02-05 20:14:41.719
*** 2009-02-05 20:14:41.719
Process startup failed, error stack:
ORA-27300: OS system dependent operation:fork failed with status: 12
ORA-27301: OS failure message: Not enough space
ORA-27302: failure occurred at: skgpspawn3
*** 2009-02-05 20:15:07.770
Process startup failed, error stack:
ORA-27300: OS system dependent operation:fork failed with status: 11
ORA-27301: OS failure message: Resource temporarily unavailable
ORA-27302: failure occurred at: skgpspawn5
*** 2009-02-05 21:39:15.391
Process startup failed, error stack:
ORA-27300: OS system dependent operation:fork failed with status: 12
ORA-27301: OS failure message: Not enough space
ORA-27302: failure occurred at: skgpspawn3
but I would like to avoid future occurances, I don't think we here have oracle support, so writing in forums,
Can anyone please help regarding this issue and defunct oracle process?
Thanks

Well, You should get one.
But this error is related to too low opsystem parameters. Check system logs (/var/adm), dmesg and others to see is there any at time of crash with some more detailed information.
Check You swap space, if some process ocuppied 8GB, then it can happen that You run out of swap.
and I would suggest to bounce database, kill all defunct processes and start database again.

ORA-01078: failure in processing system parameters LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'

I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
   uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
   uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
.bash_profile edited for oracle11g user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=ora11g
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
.bash_profile edited for grid user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
export ORACLE_SID=+ASM
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
Till here everything seems to be OK!!!!
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
select status from v$instance
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
[grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
[grid@orcl11g ~]$ srvctl start database -d ora11g
And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
    +ASM:/u01/app/grid/product/11.2.0/grid:N   # line added by Agent
     ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
NOW QUESTIONS!!!!!
1. Why I can't change the status of database to OPEN as grid user?
2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
3. When checking database as grid user it seems to be Database runnning... If running why it is not in OPEN state? What is running means here?
4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup the database then another error occured as in above. WHY?
5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
Thanks,
DBA_84

I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems.

Spatial query index creation fails with ORA-13282: failure on initializatio

Hi,
I have an Oracle 10g 10.2.0.5.0 database newly installed. Spatial index creation fails:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13282: failure on initialization of coordinate transformation
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
The script I am trying to run is:
Insert into USER_SDO_GEOM_METADATA
(TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
Values
('SOME_TABLE', 'geo',
"SDO_DIM_ARRAY"(
"SDO_DIM_ELEMENT"('X',600000,900000,0.001),
"SDO_DIM_ELEMENT"('Y',150000,400000,0.001)), 23700);
CREATE INDEX IX_GEO_SOME_TABLE ON SOME_TABLE (GEO) INDEXTYPE IS MDSYS.SPATIAL_INDEX ;
Earlier I had some issues with NLS settings in relation to Spatial, but in this particular case setting the NLS_LANG for AMERICAN_AMERICA does not help. I found this comment http://www.orafaq.com/forum/t/127312/2/ but would not like to hack around with MDSYS table content. Any help is highly appreciated.
Regards, Tamas

Tamas,
1 . . .Are you indexing a table that already has geometries or an empty table?
. . . .If the former, do all the geometries in that table have the same (not NULL) SRID (23700)?
2 . .The link you posted suggests a parsing problem since in Hungarian (23700), the decimal seperator is a comma (not a period). Accordingly, I believe the edit to mdsys.sdo_cs_srs.WKTEXT would be:
PROJCS["HD72 / EOV", GEOGCS [ "HD72", DATUM ["Hungarian Datum 1972 (EPSG ID 6237)", SPHEROID ["GRS 1967 (EPSG ID 7036)", 6378160, 298,247167427]], PRIMEM [ "Greenwich", 0,000000 ], UNIT ["Decimal Degree", 0,01745329251994328]], PROJECTION ["Egyseges Orszagos Vetuleti (EPSG OP 19931)"], UNIT ["Meter", 1]]
^ ^ ^ Regards,
Noel

ORA-13282: failure on initialization of coordinate transformation

Hi all,
I try to create an index with type spatial_index and get this errormessage:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13282: failure on initialization of coordinate transformation
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
ORA-06512: at line 1
The WKTEXT ist this one (if it has something to do with it):
PROJCS["Thueringen 4",GEOGCS["GCS_Deutsche_Hauptdreiecksnetz", DATUM["D_DHDN",SPHEROID["Bessel_1841",6377397.155,299.1528128]], PRIMEM["Greenwich",0],UNIT["Degree",0.0174532925199433]], PROJECTION["Transverse_Mercator"],PARAMETER["False_Easting",4500000], PARAMETER["False_Northing",0],PARAMETER["Central_Meridian",12], PARAMETER["Scale_Factor",1],PARAMETER["Latitude_Of_Origin",0],
UNIT["Meter",1]]
Does anybody have any idea, what the problem could be?
Thanks in advance
Alex

Hi Udo,
This worked for me in 10g R1:
insert into cs_srs values (
'DHDN Soldner Berlin (EPSG 3068)',
81989002,
81989002,
NULL,
'PROJCS ["DHDN / Soldner Berlin",
GEOGCS ["",
DATUM ["",
SPHEROID ["Bessel 1841", 6377397.155000, 299.152813],
582.000000, 105.000000, 414.000000, -1.040000, -0.350000, 3.080000, 8.300000],
PRIMEM [ "Greenwich", 0.000000 ],
UNIT ["Decimal Degree", 0.01745329251994330]],
PROJECTION ["Transverse Mercator"],
PARAMETER ["Central_Meridian", 13.6272037],
PARAMETER ["Latitude_Of_Origin", 52.41864828],
PARAMETER ["False_Easting", 40000.00],
PARAMETER ["False_Northing", 10000.00],
UNIT ["Meter",1.000000000000]
null);
select sdo_cs.validate_wkt(81989002) from dual;
select sdo_cs.transform(sdo_geometry(2001,8192,sdo_point_type(13.6,52.4,null),null,null),81989002)
from dual;
select sdo_cs.transform(SDO_GEOMETRY(2001,81989002,SDO_POINT_TYPE(38098.5904,8073.54076,NULL),NULL,NULL),8192)
from dual;
In 10gR2, you'll have to follow the new requirements for coordinate systems.

ORA-32003: error occured processing parameter 'distributed_transactions'

Hi,
We are having oracle 10g database on AIX platform.As of now,Our database is running on pfile and We wanted the database to run on spfile.I tried to create the spfile and It is throwing the below error.Could somebody help me out on this issue...
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'distributed_transactions'
LRM-00101: unknown parameter name 'distributed_transactions'
I read the following old thread in this discussion forum related to this error , but I could not find a solution in that thread.
error occured processing parameter

Hi Satish,
I'm not sure.I have taken up this project recently and seeing lot of issues with the databases,might be lack of proper administration.
For some other database also I'm getting the same error for the parameter 'job_queue_interval'
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'job_queue_interval'
LRM-00101: unknown parameter name 'job_queue_interval'
If these are the parameters from oracle 8.1.7,can I comment these out.
or How can I resolve these issues related to the parameters.

ORA-19587: error occurred reading 16384 bytes at block number 1

Hi,
I am getting the following error after I run rman hot backup.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/11/2007 02:01:03
ORA-19587: error occurred reading 16384 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
Additional information: 1
Additional information: 1
Can anyone please advise. thanks

Pardon me for not providing all the information.
OS - Solaris 9 64bit
RMAN Script:
#!/bin/ksh
# Script Name: rman_proddb_hot_bkp.sh
# Version: 1.0 01-JUN-07
# This script takes online backup of the database
# Uncomment for tracing
set -xv
# ~~~~~ set the variables ~~~~~ #
ORACLE_HOME=/u01/app/oraprd/product/10.2.0/db_1
ORACLE_BASE=/u01/app/oraprd
ORACLE_SID=proddb
DATE_TODAY=`date +%d-%m-%y`
# ~~~~~ set the enviroment ~~~~~ #
HOME=/export/home/oraprd
LOGNAME=oraprd
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/ccs/bin:/usr/openwin/bin:/usr/local/bin:/usr/dt/bin
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
SHELL=/usr/bin/ksh
export HOME LOGNAME
export ORACLE_HOME ORACLE_BASE ORACLE_SID
export DATE_TODAY
LOG_DIR=/var/local/logs
export LOG_DIR
# ~~~~~ Check if output file exists ~~~~~ #
cd ${LOG_DIR}
touch ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
chmod 755 ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
LOG_FILE=${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
export LOG_FILE
# ~~~~~ start RMAN hot backup ~~~~~ #
rman target / nocatalog log=${LOG_FILE} <<EOF
run {
sql "alter system archive log current";
host 'sleep 30';
crosscheck backup;
crosscheck archivelog all;
backup database plus archivelog tag "manual_hot_bkp_on_${DATE_TODAY}";
delete noprompt expired backup;
delete noprompt obsolete;
exit;
EOF
OS Disk space: df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d60 16G 4.0G 12G 26% /u02
/dev/md/dsk/d50 35G 25G 9.3G 73% /u01
/dev/md/dsk/d70 1.9G 1.3G 585M 70% /u03
/dev/md/dsk/d80 1.9G 1.3G 598M 69% /u04
/dev/md/dsk/d90 325G 77G 245G 24% /u05
/dev/md/dsk/d40 935M 210M 669M 24% /export/home
FRA is 32G and is 20G at this stage. I get an error when I try to delete obsolete;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/12/2007 06:56:21
ORA-19587: error occurred reading 16384 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
Additional information: 1
Additional information: 1

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone

Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!

Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore

ORA-00604: error occurred at recursive SQL level 1

Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
raja

I had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS.

ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)

I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RP

Seems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
   ORA-01000: "maximum open cursors exceeded"
        Cause: A host language program attempted to open too many cursors.
               The initialization parameter OPEN_CURSORS determines the
               maximum number of cursors per user.
       Action: Modify the program to use fewer cursors. If this error occurs
               often, shut down Oracle, increase the value of OPEN_CURSORS,
               and then restart Oracle.

ORA-00604: error occurred at recursive SQL level

I only have 2 users and approx 9 schemas.
Why is this complaining about maximum cursors??
Error message:
ORA-00604: error occurred at recursive SQL level
ORA-01000: maximum open cursors exceeded
ORA-0064 error occurred at recursive SQL level
Cause:
An error occurred at recursive SQl level
(a statement applying to internal dictionary tables)
>>
Created 2 users
1) boundaries (User)
has a couple of schema.
National, provincial, district, village
I have set-up the Primary & Foreign keys.
Only 1 table has 1 row of data
2) Projects (User)
Set up one table - Program
Program has a Primary Key.
Foreign key is linked to (boundaries) national PK
The problem occured when I entered data into boundaries.national

Clive_S wrote:
OS: Windows Server 2008 standard - 64 bit.
Select * from v$version
Oracle Database 11g release 11.1.0.7.0 - 64 bit
PL/SQL release 11.1.0.7.0 - production core 11.1.0.7.0
Production TNS for 64-bit windows: 11.1.0.7.0
Production NLSRTL for 64-bit windows: 11.1.0.7.0
I am trying to replicate in Oracle what I would do in SQL Server. There's your first mistake. There are too many differences. My first programming language was COBOL, but I don't write other languages as if they were COBOL.
I cannot attach an image of the users & tablespace, to illustrate.Another reason to work in sqlplus.
>
I created 2 User = Boundaries and Project
I created several schemas (tables)No, you created 2 schemas. One user = one schema = one user.
A schema is not a table and a table is not a schema. A schema is a collection of objects, which can include multiple tables but only those owned by one username.
>
Boundaries (user)
Tables:
Country
Province
District
Village
Projects (user)
Tables:
Program
Project.Program has a FK = Country that is linked to Boundaries.Country
I need to create several scemas (databases):Another difference. a schema is not a database, though the sql server concept of a database is somewhat analogous to an oracle schema.
Boundaries, Project, Assets.
There are foreign keys linking the various schemas.FKs link tables not schemas.
Edited by: EdStevens on Feb 26, 2010 10:30 AM

ORA-00604: error occurred at recursive SQL level 1 and ORA-30036:

Hi Gurus,
I am trying to shrink the table segment along with indexes.
I am using
alter table OWNER.TABLE shrink space cascade; syntax but after 1 hr i got the following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30036: unable to extend segment by 4 in undo tablespace 'UNDOTBS01'
UNDO tablespace has sufficient space and undo_retention is 6Hrs. What could be the problem ?
Or do i need to use
alter table OWNER.TABLE shrink space; only ?
Thanks & Regards

Hi,
I am doing this in testing enviornment and before this activity added 4g space to existing 50GB undo tablespace.
No jobs are running in testing environment and the shrinking on table is of 12GB. I cann't import/export and truncate or move to different tablespaces as this has oracle advanced queue and chances are more to corrupt queues.
Thanks

ORA-27302: failure occurred at: skgpspawn

Similar Messages

Maybe you are looking for