ORA-29534 error for Class can not be resolved

HI,
I am trying to load and resolve a third party jar file which has some JMS classes. But while using the loadjava utility,
"loadjava -u scott/tiger@dbname -r -v -genmissing weblogic.jar"
i get "ORA-29534: referenced object <Class Name> could not be resolved" error for most of the classes.
This Jar file has around 15000 classes definitions and it takes almost a complete day to load and resolve it. Even after taking so much of time it is unable to resolve all the classes and give a runtime exception Class can not be resolved for some class.( i have created the oracle java stored procedure successfully)
I need a help on this very urgently...
Thanks in advance....
Sachin

Sachin,
There are many possible causes for the error you are getting, for example:
1. The DBMS_JAVA package is corrupt.
(Have you previously successfully loaded JARs -- or even java classes -- into the database?)
2. A java version mismatch.
(What Oracle database version are you using, and what java version is your JAR file compatible with?)
You say,
Surely they are loaded but not resolvedIs this a question, or a statement? Have you verified that the classes are loaded and not resolved? I use the following query for this:
select DBMS_LONGNAME(OBJECT_NAME), STATUS
from USER_OBJECTS
where OBJECT_TYPE like 'JAVA%'The value for the STATUS column should be 'VALID'.
I'm only guessing, but you may find more information (regarding the error you are getting) in the Oracle log files. Have you checked them?
Have you tried searching the MetaLink Web site?
http://metalink.oracle.com
(Search for "ORA-29516", perhaps.)
Good Luck,
Avi.

Similar Messages

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

I keep getting an error The ipad can not be synced because the sync session failed. same error for my iphone. any ideas?

I keep getting an error The ipad can not be synced because the sync session failed. same error for my iphone. any ideas?

Try deleting iTunes from your computer. Do not delete your iTunes library. Then download and install a fresh copy if iTunes. Reboot your computer after installation of iTunes.
Then reboot your phone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
Reconnect the phone to your computer running iTunes and see if the sync process will go through.

Internal error Occured mapping can not be opened - while opening interface

Hi Gurus,
I Am using ODI 11g to load data from Oracel to Oracel database using different schemas as a source to load facts.
for the first time its loading sucessfully and when i try to open the same interface to see the mapping its showing the errror like *"Internam error Occured mapping can not be opened"*
Tis is very urgent to resolve as per my project neeed.
Please suggest steps : how to resolve the issue.
Thanks in Advance.
regards
sri

While the iTunes app is being updated, you are correct, it cannot be opened.
This is true of all Apple apps on your Mac.
iTunes is not very large compared to other apps. Let it update, then open it.

Applet in ie 5.0: class can not be Instantiated

Hi!
My problem is an Applet, which works fine with the appletviewer and with my iExplorer 5.0.
But when I tried to install my Application (the Applet is part of a J2EE-WebApp) on the tomcat of an other computer, I get the
"class can not be instantiated"-Error and iE 5.0 only displays a grey box in the size of the Applet. With the appletviewer it works.
I got the same tomcat, same mySQL and same browser on both computers.
I also invoked the application running in tomcat on my computer from 2 other computers - on one of them, the Applet was shown, on the other, I only got this grey box.
The version of the iExplorer was exactly the same.
What can be wrong?

Are you sure there is a static method in the Applet class named newAudioChip that takes a URL as an argument?

Problem with Player class: Error: (28) class Player not found

Hi,
I had this error while attempting to use the Player object of media package. I am using JDeveloper 3.2
Error: (28) class Player not found in class lyee.Frame5.
My program code has this shape.
import java.awt.event.*;
import java.applet.*;
import java.net.*;
import java.io.*;
import javax.media.*;
public class Frame5 extends JFrame {
FlowLayout flowLayout = new FlowLayout();
JPanel jPanel1 = new JPanel();
Player lecteur;
Could someone help me finding where the error is exactly. The Player object is in javax.media pakcage, right ? Is there any librarary missing ??
Thank you
Jaouhar

If you haven't done so already, you have to install JMF -- Java Media Framework, which you can download from the Sun website ( http://java.sun.com ). After that, you have to add that library to your project, in your project settings dialog.

Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".

Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.

I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help!

Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites

MSS Report Export to excel - ERROR - load: class query not found

Hi All,
I am navigating and getting error as follows:
Manger Services ->My reports -> Report Selection -> HIS Reports -> General -> Employee Details -> add some people and click start report -> report shows -> click local file -> save as spreadsheet get ERROR - load: class query not found in the status bar or IE and IE then locks up
Please reply if any one has some clue.
Thanks & Regards,
Vishal

Hey Vishal,
This issue gave us a very hard time. The query was HRIS manager. when you add some attributes to be exported to excel and then select export. It hangs there. or hangs at the step where you select save as spreadsheet, OR after it where it runs a query to export.
I came to know that Java JRE is used in the last step. So for solving this issue, go to java.com, on the first screen there will be big link to install java(i guess JRE). install it and then try exporting your query. I am sure it will work.
Just notice that after doing installation of Java you will get coffee cup in you system tray.
Thanks.
Ankur.
P.S. Points if works.

Document flow for delivery can not be updated

Hi all,
I received goods for a PO and the PO has a subsequent OBD created. When I tried to reverse the GR I got the following error- document flow for delivery can not be updated
Can you help me understanding why this error occured?
Thanks,
Rana

Hi Rana,
In ECC 6.0 both ways you can do the goods moments (WRto PO/ Delivery) provided "Document flow update" check box checked in Logistics Execution-Shipping-Basic Shipping Functions-Configure Global Shipping Data
Please confirm
Nagesh

Error "This class does not support SAAJ 1.3" in oim 11g

hai all,
i have error "This class does not support SAAJ 1.3" when i running create user.
i already tried added in startWeblogic.cmd and in setDomainEnv.cmd :
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl and -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
step like this site (http://blog.xebia.com/2009/07/14/jax-ws-cxf-and-saaj-on-oracle-weblogic-103/)
i already too set path for = saaj-impl-1.3.jar but the error still same "This class does not support SAAJ 1.3"
i used weblogic 10.3.5, i'm generate soap message used rt.jar (import javax.xml.namespace.QName; etc)
any idea to solving this error ?
thank's
darvesth
Edited by: darvesth on Mar 19, 2013 4:08 AM

thank you darvest, i follow your step before.
but i added any steps after that.
1. include saaj-impl-1.13.jar and saaj-api.jar in project adapter
2. add parameter "SOAPConstants.SOAP_1_2_PROTOCOL" in line code, MessageFactory mf= MessageFactory.newInstance()
-> MessageFactory mf= MessageFactory.newInstance(SOAPConstants.SOAP_1_2_PROTOCOL);
so, my problem already resolve..
i hope this solution usefull to resolve our problem, darvest.
thanks,
Tim BENGA

I get an error message stating can not update iPhone because an error occured

I get an error message stating can not update iPhone because an error occurred

Search the forums for the exact error that is occurring and follow the steps found.

HT1420 I'm getting this error. You can not update this software since you have not owned the major version of this software.

My kids did something to itunes and now I'm getting the error.
You can not update this software since you have not owned the major version of this software. This is the computer that we have always updated our apps on. Does anyone have any ideas for me?

I have the same thing. It looks like it's the store. What is happening is that instead of the store showing you only the updates for the account you are logged into, it shows you the updates for all of your accounts. So if you try & update an app that was purchased with another account, you get that message. This is a pain, as you have to go through the apps individually (update all just gives you an error) , and then log out & into the other account again to get the rest of the updates.
Message was edited by: jrentzke

Updated to IOS 8 yesterday and ever since have been getting an error message stating "can not download item, try again later".

After updating to IOS 8 have been getting an error message stating "Can not down load item, please try again later". I have chosen both options to answer (done or retry) but still get the message. I have backed my phone up on iTunes but and still getting the message.

Because all these **** updates Apple can't configurite correctly
one update counteracts another update.
im so ****** with all this ****.
now they want to charge you 20.00 dollars to talk on the phone with them.
this kind of business will bite them in the *** soon.there are other things out there you can change to.
and the people on the phone don't know **** about face book.
probably get blocked for a couple of hours for telling the truth.
Dana P. Minaty

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

ORA-29534 error for Class can not be resolved

Similar Messages

Maybe you are looking for