ORA-30931

I get CLOB from Web Service and try to convert it to XMLType using schema, but get error
ORA-30931: Element 'LoanDetails' cannot contain mixed text
What element I should set to "mixed"? Or what I should do?! It happens only in Solaris , in Windows all works properly. As I discovered RTF text in node cause this error

I would strongly recommend wrapping the contents of the LoanDetails node in a CDATA section if possible. It looks like the response is not valid per the XML Schema in the WSDL To be sure I'd need to see the WSDL for the Web Service and the WebService response

Similar Messages

ORA-30931 (again) when inserting data in XMLType table

Hi,
I've created a table by registrating an XML Schema in the database.
The schema is the following :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" xdb:storeVarrayAsTable="true">
     <xsd:element name="Customer" type="customerType" xdb:defaultTable="CUSTOMER"/>
     <xsd:complexType name="customerType" xdb:maintainDOM="false">
          <xsd:sequence>
               <xsd:element name="NAME" type="xsd:string" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2"/>
               <xsd:element name="EMAIL" type="xsd:string" xdb:SQLName="EMAIL" xdb:SQLType="VARCHAR2"/>
               <xsd:element name="ADDRESS" type="xsd:string" maxOccurs="unbounded" xdb:SQLName="ADDRESS" xdb:SQLCollType="ADDRESS_TYPE" xdb:SQLType="VARCHAR2" xdb:maintainOrder="false"/>
               <xsd:element name="PHONE" type="phoneType" xdb:SQLName="PHONE"/>
               <xsd:element name="DESCRIPTION" type="contentType"/>
          </xsd:sequence>
     </xsd:complexType>
     <xsd:complexType name="contentType" xdb:SQLType="CLOB" xdb:maintainDOM="true">
          <xsd:sequence>
               <xsd:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
          </xsd:sequence>
     </xsd:complexType>
     <xsd:simpleType name="phoneType">
          <xsd:restriction base="xsd:string">
               <xsd:pattern value="\\(\\d\{3\}\\)\\d\{3\}-\\d\{4\}"/>
          </xsd:restriction>
     </xsd:simpleType>
</xsd:schema>
Now when I try to do an insert in the table and use mixed case in the contents of the description tag I get an ORA-30931.
Anybody got a clue why?
Thanks for your help!
Kris

Kris
xsd:any does not allow text() nodes outside of elements, it only allows child elements. If you want to add text() nodes outside of child elements this is mixed text. To get this you want to add mixed="true" to the complexType definition
contentType
SQL> begin
2 dbms_xmlschema.registerSchema('http://localhost:8085/public/customer_simple_ann.xsd',
3 xmltype('<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracl
e.com/xdb" xdb:storeVarrayAsTable="true">
4 <xsd:element name="Customer" type="customerType" xdb:defaultTable="CUSTOMER"/>
5 <xsd:complexType name="customerType" xdb:maintainDOM="false">
6 <xsd:sequence>
7 <xsd:element name="NAME" type="xsd:string" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2"/>
8 <xsd:element name="EMAIL" type="xsd:string" xdb:SQLName="EMAIL" xdb:SQLType="VARCHAR2"/>
9 <xsd:element name="ADDRESS" type="xsd:string" maxOccurs="unbounded" xdb:SQLName="ADDRESS" xdb:S
QLCollType="ADDRESS_TYPE" xdb:SQLType="VARCHAR2" xdb:maintainOrder="false"/>
10 <xsd:element name="PHONE" type="phoneType" xdb:SQLName="PHONE"/>
11 <xsd:element name="DESCRIPTION" type="contentType"/>
12 </xsd:sequence>
13 </xsd:complexType>
14 <xsd:complexType mixed="true" name="contentType" xdb:SQLType="CLOB" xdb:maintainDOM="true">
15 <xsd:sequence>
16 <xsd:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
17 </xsd:sequence>
18 </xsd:complexType>
19 <xsd:simpleType name="phoneType">
20 <xsd:restriction base="xsd:string">
21 <xsd:pattern value="\\(\\d\{3\}\\)\\d\{3\}-\\d\{4\}"/>
22 </xsd:restriction>
23 </xsd:simpleType>
24 </xsd:schema>'));
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> insert into customer
2 values (XMLTYPE('<Customer><NAME>Steve Joes</NAME><EMAIL>[email protected]</EMAIL><ADDRESS
Somewhere, Sometown, RedWood Shores, California</ADDRESS><PHONE>6505678546</PHONE><DESCRIPTION>Hes the man</DESCRIPTION></Customer>').CreateSchemaBasedXML('http://localhost:8085/public/customer_simpl
e_ann.xsd'))
3 /
1 row created.
SQL>

ORA-30931 when changing WebDAV port

Hi,
I've created the XDB_UTILITY package like described in note 209564.1 on the metalink site. This package is an interface to the dbms_xdb package and can be used to change the FTP and HTTP ports of the XML DB.
Changing the FTP port is no problem but Oracle does not change the HTTP port. The error I get is 'ora-30931: Element 'httpconfig' cannot contain mixed text'. I've tried several portnumbers, the only moment I don't get the error is when I leave the parameter portnumer blank.
I've googled for this error without success, hopefully somebody on this forum has got this error before.
Best Regards,
Kris

Kris
In 10.2.0.1.0 and later the xdb_utility package should not be used to change port numbers. This functionality was added directly to the dbms_xdb package via the getHttpPort, getFtpPort, setHttpPort and setFtpPort methods. If you get the problem you are reporting when you call those methods directly please open a tar with Oracle Support as this will need to be bugged.
I'll ask someone to update the note you reference with this info.

ORA-30931: Element 'document-groups' cannot contain mixed text

I get this error when I try to create a schema based XML resource as soon as the XML contains utf8 characters.
declare
xmlref XMLType;
result BOOLEAN;
BEGIN
SELECT     XMLElement ( "document-groups",
     XMLAttributes ( 'http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi",
'CCRDocGroupsAndTypes.xsd' AS "xsi:noNamespaceSchemaLocation" ),
     XMLAgg (
     XMLElement ("document-group",
     XMLAttributes (DECODE(aa.aa_id,5,'FAQ',7,'SOFTWARE',2,'WARRANTY') AS "id" ),
     XMLElement ("last-modified-date", '2004-06-23T17:10:20' ),
     XMLElement ( "document-types",
     XMLAgg (
     XMLElement ("document-type",
     XMLAttributes (dtt.dt_cd AS "id" ),
     XMLElement ("description", dtt_desc) ,
     XMLElement ("language",
     XMLAttributes ( lang_cd AS "id" ) ) ) ) ) ) ) )
INTO      xmlref
FROM     m_doctype_translation      dtt
,     m_document_type          dt
,     m_application_area     aa
WHERE     dt.dt_cd     = dtt.dt_cd
AND     aa.aa_id     = dt.aa_id
--AND     dtt.lang_cd      = 'ENG'
AND     aa.aa_id     IN (2,5,7)
GROUP     BY aa.aa_id
result := DBMS_XDB.createResource(
'/atg/xxx.xml'
,xmlref );
COMMIT;
END;
Any ideas?

Can you post the instance document generated by your Select Statement..

Register xml schema in Oracle 9i error

I got following ORA error when register xml schema in Oracle 9i.
ORA-30931: Element 'seq' cannot contain mixed text
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 0
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 26
ORA-06512: at line 754
There is no mixed in the XSD. There is someone mentioned oracle 9i has bug and need to change the xsd file. any ideas how to work around this?
Edited by: user7435395 on Dec 2, 2011 1:22 PM

You are out of luck. Oracle 9i is not a supported version.

PL/SQL report errors: ORA-01422

Hi all,
(before i you read i would like to say i have searched the net for this error code but nothing shows up like this problem..)
I am getting an error problem when i select certain Schemas from a list on an apex app. page, it only works for some schemas not all..
When i select one schema, it is supposed to display one row.. when i select [ALL] it is supposed to show them all.
It does work if i select '[ALL]' from the select list (p3_schema_name), just not for every single individual one.
the error code:
ORA-01422: exact fetch returns more than requested number of rows
declare
vSchema varchar2(20);
vStmt varchar2(1000);
vVersion number(5);
vDBName varchar2(20);
vHostName varchar2(80);
vStmt2 varchar2(1000);
vVersion2 number(5);
vDBName2 varchar2(20);
vServer2 varchar2(80);
vSchema2 varchar2(80);
CURSOR c_schemas IS
    select owner from dba_tables@P3_DB_NAME.db_link where table_name = 'DDL_LOG' and num_rows > 0 order by owner;
begin
IF :P3_SCHEMA_NAME != '[ALL]' AND :P3_DB_NAME IS NOT NULL AND :P3_SERVER_NAME IS NOT NULL THEN
    vServer2 := :P3_SERVER_NAME;
    vSchema2 := :P3_SCHEMA_NAME;
      vStmt2 := 'select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from &P3_SCHEMA_NAME..ddl_log@&P3_DB_NAME.db_link GROUP BY DDH_DB_NM';
      Execute Immediate vStmt2 into vDBName2, vVersion2;
        htp.p('<br>');
        htp.p('<table border="1">');
        htp.p('<tr>');
        htp.p('<th bgcolor="#FFCC99">SERVER NAME</th>');
        htp.p('<th bgcolor="#FFCC99">DB NAME</th>');
        htp.p('<th bgcolor="#FFCC99">SCHEMA NAME</th>');
        htp.p('<th bgcolor="#FFCC99">PATCH</th>');
        htp.p('</tr>');
        htp.p('<tr>');
        htp.p('<td>');
        htp.p(vServer2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vDBName2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vSchema2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vVersion2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p('<BR>');
        htp.p('</td>');
        htp.p('</tr>');
        htp.p('</tr>');
        htp.p('</table>');
   ELSE IF :P3_SCHEMA_NAME = '[ALL]' AND :P3_DB_NAME IS NOT NULL AND :P3_SERVER_NAME IS NOT NULL THEN
   vHostName := :P3_SERVER_NAME;
   vDBName := :P3_DB_NAME;
     open c_schemas;
      htp.p('<br>');
      htp.p('<table border="1">');
      htp.p('<tr>');
      htp.p('<th bgcolor="#FFCC99">SERVER NAME</th>');
      htp.p('<th bgcolor="#FFCC99">DB NAME</th>');
      htp.p('<th bgcolor="#FFCC99">SCHEMA NAME</th>');
      htp.p('<th bgcolor="#FFCC99">PATCH</th>');
      htp.p('</tr>');
    LOOP
      FETCH c_schemas INTO vSchema;
      EXIT WHEN c_schemas%NOTFOUND;
      vStmt := 'select max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from '||vSchema||'.ddl_log@&P3_DB_NAME.db_link where DDH_SCHEMA_NR = (select max(DDH_SCHEMA_NR) from '||vSchema||'.ddl_log@&P3_DB_NAME.db_link) and rownum < 2' ;
      Execute Immediate vStmt into vVersion ;
      htp.p('<tr>');
      htp.p('<td>');
      htp.p(vHostName);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vDBName);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vSchema);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vVersion);
      htp.p('</td>');
      htp.p('<td>');
      htp.p('<BR>');
      htp.p('</td>');
      htp.p('</tr>');
    END LOOP;
      htp.p('</tr>');
      htp.p('</table>');
CLOSE c_schemas;
END IF;
END IF;
END;I have checked the DDH_SCHEMA_NR for repeating entries of the highest number.. some of the ones that dont work do have repeating entries some don't.
Sorry if this is confusing, i have tried to explain it as best as i can.
Thanks in advance for any help.
Ashleigh

Hello Ashleigh,
Based on your code, I'd start by running this piece of SQL via command-line (thru SQL Workshop, SQL*Plus, Toad, etc.), replacing &P3_SCHEMA_NAME. and &P3_DB_NAME. with values that are currently causing the routine to fail and see if it returns more than one row. I don't know your data, but DISTINCT and GROUP BY are typically used to return multiple (though grouped/summarized) rows. It appears to be the only statement that would cause the error your seeing (more than one row being returned into single variables).
select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from &P3_SCHEMA_NAME..ddl_log@&P3_DB_NAME.db_link GROUP BY DDH_DB_NM;I'm actually surprised that the code runs at all. I didn't think 'execute immediate' would know what to do with substitutions indicated as "&something." (I've typically seen that when substituting in dynamic HTML/Javascript code but maybe I'm learning something new). But since you already have vServer2 and vSchema2, I'd be more apt to code it as:
vStmt2 := 'select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from ' ||
vSchema2 || '.ddl_log@' || vServer2 || '.db_link GROUP BY DDH_DB_NM';Hope this helps,
John

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

EA2: ORA-01427 clicking on a view in the navigator

SQLDev: 1.5.0.52.03
Java: 1.6.0_04
Oracle: 9.2.0.7.0
I'm getting the following error when I click on a view in the navigator pane:
An error was encountered performing the requested operation:
ORA-01427: single-row subquery returns more than one row 01427. 00000 - "single-row subquery returns more than one row"I'm not seeing any errors in the shell window.
After clicking on <OK> in the error dialog, the normal tabs (Columns, Data, Grants, Dependencies, Details, SQL) are displayed, but there is no content in the Columns tab.
All the other tabs seem to function normally.
Here is the DDL from the SQL tab
CREATE OR REPLACE VIEW "SUBSCRIPTIONS"
    "ORDER_ID", "SUNBURST_ORDER_ID", "SIEBEL_ORDER_ID", "ACCOUNT_ID",
    "COMP_ID", "SUBACCOUNT_ID", "START_DATE", "END_DATE", "PULL_DATE",
    "SUBSCRIPTION_TYPE", "PRICE_CLASS", "DESCRIPTION", "SEAT_COUNT",
    "ORDER_DURATION", "CALLBACK_INTERVAL", "UPDATE_DATE", "UPDATE_USERNAME",
    "AFFILIATE"
AS
    SELECT order_id,
        sunburst_order_id,
        siebel_order_id,
        account_id,
        comp_id,
        subaccount_id,
        start_date,
        end_date,
        pull_date,
        product_id,
        price_class,
        product_name,
        add_users,
        order_duration,
        callback_interval,
        last_mdfy_date,
        last_mdfy_emp,
        affiliate
    FROM csbcrossworlds.subscriptions;We have 15 views in this schema, 3 of them fail this way but the other 12 display the columns just fine. So far I am unable to detect any commonality.
Any ideas?

Ok, I think I found the problem. The view in question (SUBSCRIPTIONS) is owned by 'PHILC' and it references a table named 'SUBSCRIPTIONS' owned by 'CSBCROSSWORLDS'. There are two other development schemas that also own tables named 'SUBSCRIPTIONS'.
I believe the 'Columns' tab is executing the query below. The subquery in this SQL tries to identify the primary key columns for the 'SUBSCRIPTIONS' view in my schema (PHILC):
SELECT
    c.column_name,
    DECODE(
        data_type,
            'CHAR',      data_type||'('||c.data_length||')',
            'VARCHAR',   data_type||'('||c.data_length||')',
            'VARCHAR2', data_type||'('||c.data_length||')',
            'NCHAR'   , data_type||'('||c.data_length||')',
            'NUMBER' , DECODE(c.data_precision,null,'NUMBER', data_type||'('||c.data_precision||','||c.data_SCALE||')'),
            'NVARCHAR', data_type||'('||c.data_length||')',
            'NVARCHAR2', data_type||'('||c.data_length||')',
            data_type) data_type,
    DECODE(nullable, 'Y', 'Yes', 'No') nullable,
    c.DATA_DEFAULT,
    column_id,
    com.comments,
    (SELECT 1 FROM all_constraints, all_cons_columns
      WHERE all_constraints.constraint_type = 'P' AND
            all_constraints.constraint_name = all_cons_columns.constraint_name AND
            all_constraints.owner = all_cons_columns.owner AND
            all_cons_columns.table_name = c.table_name AND
            c.column_name = all_cons_columns.column_name) Primary_Key,
    c_update.insertable,
    c_update.updatable,
    c_update.deletable
FROM
    sys.all_tab_Columns c, sys.all_col_comments com, sys.user_updatable_columns c_update
WHERE
    c.owner = :OBJECT_OWNER AND
    c.table_name = :OBJECT_NAME AND
    c.table_name = com.table_name AND
    c.owner = com.owner AND
    c.column_name = com.column_name AND
    c_update.column_name = com.column_name AND
    c_update.table_name = com.table_name
;Extracting the subquery into this:
SELECT
    all_constraints.owner,
    all_constraints.table_name,
    all_constraints.constraint_name
FROM all_constraints, all_cons_columns
WHERE
    all_constraints.constraint_type = 'P' AND
    all_constraints.constraint_name = all_cons_columns.constraint_name AND
    all_constraints.owner = all_cons_columns.owner and
    all_cons_columns.table_name = 'SUBSCRIPTIONS' and
    'ORDER_ID' = all_cons_columns.column_name;I got this output:
   owner          table_name      constraint_name
CUTOVER          SUBSCRIPTIONS    SUBSCRIPTIONS_PK
CROSSWORLDS      SUBSCRIPTIONS    SUBSCRIPTIONS_PK
CSBCROSSWORLDS   SUBSCRIPTIONS    SUBSCRIPTIONS_PKLooking at the DDL for the view, the row we really want is for owner 'CSBCROSSWORLDS'. Unfortunately, that means having to somehow parse the SQL text to extract the owner name...
Phil

Using database-link in view to get around ORA-01031 error

I have been granted select rights on a users table. I am therefore able to select from his table. If however I try create a view against his table I run into the ORA-01031 problem. I have worked around this problem by creating a database-link to myself and then adding that to the view creation and it works. What are the downsides of using the database-link in this way?

The only down side I have been able to identify is that a extra session is created and that the CPU has a little extra work due to the LOOP BACK that takes place. I need to ensure the network is not unnessesarly used and therefore will need to ensure that 127.0.0.1 (local host) is used in the database connection discription. e.g.
create database link my_db_link connect to scott identified by tiger using '(description=(address=(protocol=tcp)(host=127.0.0.1) (Port = 1521) ) (connect_data= (sid=ora10g)))';

Getting ora:00904 invalid indentifier error while running i query

Hi,
I have a remote database and local database both are oracle 10gR2.Now i have written the below mentioned query in my local database and is working fine,but in case remote database it is throughing error ora:00904 invalid indentifier.
I had export the dump from remote db and import it on my local db and i tried the same and it is working fine on local after that also.
As i believe that this error usually come for column name not exist or column name or it's length or for any special character in column name of the table.But as i said it is working fine on local db but not in remote db though i am using the same dump for local and remote.
Though when i am querying the table i can able to fetch data for the any record but when i am using the below mentioned query for the same i am getting the error.As i am doing this to fecth the data for child parent related relationship.
Can any one suggest is there anything related to configaration or something else.
Please do let me know if you do want some more information on the query what i am doing inside of it.
Rgds,
Anit
Edited by: Anit A. on Sep 1, 2008 2:32 AM
Edited by: Anit A. on Sep 1, 2008 2:33 AM

WITH t
AS
SELECT decode(t.spnlevel
,3,t.u_quotesdtlid
,2,decode((select count(*)
from u_quotesdtl t2
where t2.u_quotesdtlid = t.u_quotesdtlid
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '3'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),t.u_quotesdtlid
,1,decode((select count(*)
from u_quotesdtl t2
where t2.QUOTEID = t.QUOTEID
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,t.u_quotesdtlid,decode((select count(*)
from u_quotesdtl t3
where t3.QUOTEID = t.QUOTEID
and t3.parentspn = (t3.jobgroupid||':'||t3.jobtype)
and t3.u_quotesdtlid in (select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),0,(select t4.u_quotesdtlid
from u_quotesdtl t4
,(select t1.parentspn
,t1.jobtype
,t1.jobgroupid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
) t5
where t4.spnitemcode = t5.parentspn
and t4.spnlevel = '3'
and t4.jobtype = t5.jobtype
and t4.jobgroupid = t5.jobgroupid
and t4.QUOTEID = t.QUOTEID
(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
,null,t.u_quotesdtlid) as parentquoteid
,t.u_quotesdtlid as quotesdtlid
,t.spnlevel as spnlevel
FROM u_quotesdtl t
WHERE t.QUOTEID ='som key id'
ORDER BY parentquoteid,t.spnlevel desc
select * from t;

'ORA-01722: Invalid Number' error while Running a Query

Hi,
I'm trying to run a query built on a DSO. The DSO has a field 'Start Date'. This Start Date InfoObject has a reference Char as 0DATE.
This Start Field has blank values due to which I'm getting the ORA-01722 error. I came across many threads with same topic of discussion. As mentioned in one of the Threads I have written a program to update 'Start Date' with 00000000. The code wriiten is "UPDATE /BIC/AZ_MONINV00 SET /BIC/ZSTR_DTE = '00000000' where /BIC/ZSTR_DTE = ' '.
Now when I see the data in the active data table of DSO the blank value is replaced with '00000000'.
But If I right click on the DSO click on display data the 'Start Date' field is blank. And now the Query also gets executed without any error. But in the output of the query the 'Start Date' Field has "#" values.
Can anyone suggest on how can I make these "#" values appear as 00000000 in the report?

In this case, you have to write a macro to avoid # in Analyzer.
Right Click-->Display Data will show data from Active table of DSO only.
If you don't want to show any blank date values in the report, you can exclude in Filter in Query.

ORA-12712 error while changing nls character set to AL32UTF8

Hi,
It is strongly recommend to use database character set AL32UTF8 when ever a database is going to used with our XML capabilities. The database character set in the installed DB is WE8MSWIN1252. For making use of XML DB features, I need to change it to AL32UTF8. But, when I try doing this, I'm getting ORA-12712: new character set must be a superset of old character set. Is there a way to solve this issue?
Thanks in advance,
Divya.

Hi,
a change from we8mswin1252 to al32utf8 is not directly possible. This is because al32utf is not a binary superset of we8mswin1252.
There are 2 options:
- use full export and import
- Use of the Alter in a sort of restricted way
The method you can choose depends on the characters in the database, is it only ASCII then the second one can work, in other cases the first one is needed.
It is all described in the Support Note 260192.1, "Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode)". Get it from the support/metalink site.
You can also read the chapters about this issue in the Globalization Guide: [url http://download.oracle.com/docs/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#g1011430]Change characterset.
Herald ten Dam
http://htendam.wordpress.com

While updating a table i am getting ORA-00600 error.

Hi all,
While updating a table i am getting the following:
**SQL Error: ORA-00600: internal error code, arguments: [qkebCreateConstantOpn1], [], [], [], [], [], [], [], [], [], [], []**
**00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"**
I am not getting how to proceed on this. Please guide me.
Thanks,
Ritesh

While performing some unspecified action (no DML) on an unknown table (no DDL) in an unknown version and edition of the Oracle database you had an untrapped Oracle exceptions.
There are too many unknowns to help you beyond recommending you open an SR at MyOracleSupport.

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

ORA-30931

Similar Messages

Maybe you are looking for