ORA-31495 error in synchronous change table on "string"."string"

IN ORACLE 9I
TABLE COLUMN DATA TYPE VARCHAR2 16
WHEN UPDATE COLUMN VALUE WITH 11 CHARACTERS IT GIVES ERROR
ORA-31495 error in synchronous change table on "string"."string"
ORA-01401 value too large for column
IF I UPDATE COLUMN VALUE UPTO 10 CHARACTERS IT COMMITS AND GIVES NO ERROR

What is the characterset of your database base
how you create table as
create table table1 (col1 varchar2(16 char)) or
create table table1 (col1 varchar2(16 byte))Try to create table with create table table1 (col1 varchar2(16 char)) then try insert
Regards
Singh
Edited by: Singh on Sep 2, 2008 1:00 PM

Similar Messages

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE

제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------

Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK.

Ora-00604,ora-01422 error while dropping the table

Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advance

Is there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly).

ORA-31061 error while creating XMLType table with virtual column

I'm not calling it frustration ;)
but still... what about this one :
SQL> select * from v$version;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
Table created.Now, on the latest version :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0      Production
TNS for 32-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7        passing object_value returning content)
8        as number
9      )
10    )
11 )
12 ;
      passing object_value returning content)
ERROR at line 7:
ORA-00604: error occurred at recursive SQL level 1
ORA-31061: XDB error: dbms_xdbutil_int.get_tablespace_tab
ORA-06512: at "XDB.DBMS_XDBUTIL_INT", line 1002Is there something I should be aware of?
Right now, I'm just evaluating the version so I can't submit any SR.
Thanks for anyone trying to reproduce the issue.

Just tested again on a new installation (64-bit server).
It works :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE     11.2.0.3.0     Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL>
SQL> create table test_virtual of xmltype
2 xmltype store as binary xml
3 virtual columns (
4    doc_id as (
5      xmlcast(
6        xmlquery('/root/@id'
7                 passing object_value returning content)
8        as number
9      )
10    )
11 );
Table created
Now I'll try to see what are the differences between the two installations.
Thanks Dan and Marco for looking into this.
Edited by: odie_63 on 2 mai 2012 15:51

ORA-0907 error when querying XMLDB Table using XMLExists

Hi All,
Get ORA-00907 error when trying to use XMLExists:
SELECT *
FROM tnmab_agreement_xml_binary A
WHERE
( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]')
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
OR
( XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/NamedCustomerGroups/NamedCustomer/SAP_IDs/StringWrappers[Value="$ARG"]')
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")
ORA-00907: missing right parenthesis
*00907. 00000 - "missing right parenthesis"*
**Cause:*
**Action:*
Error at Line: 6 Column: 176
Any help is appreciated
Thanks
Auro

XMLExists('declare default element namespace "http://com.oocl.schema.tnm.agreementbuilder"; $XML/Agreement/ShippingPartyGroups/ShippingParties/CustomerHolder[SAP_ID="$ARG"]'
passing agreements.AGREEMENT_XML as "XML", '5000003001' as "ARG")no ')' after the closing quote

ORA -12569 error when querying dba_change_notification_regs table

Hi,
I am getting ORA-12569 error when i am trying to execute Select * from dba_change_notification_regs from sys user .we are working on oracle 10.2 version.
Please help in resoving the issue.
Thanks In advance.
Priya

ORA-12569:     TNS:packet checksum failure
Cause:      The data received is not the same as the data sent.
Action:      Attempt the transaction again. If the error is persistent, turn on tracing and reexecute the operation.
If this doesn't resolve your issue, please see metalink 4933023.8 (problem fixed there)

Ora-00600 error when dropping a table

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
When I tried to drop a table, I got 600 error:
SQL> desc DEV.ATTR_IDX$EX
Name Null? Type
NODE_ID NOT NULL NUMBER
COL1 NUMBER
SQL> show user;
USER is "DEV"
SQL> select count(*) from DEV.ATTR_IDX$EX;
COUNT(*)
0
SQL> drop table DEV.ATTR_IDX$EX;
drop table DEV.ATTR_IDX$EX
ERROR at line 1:
ORA-00600: internal error code, arguments: [15265], [], [], [], [], [], [], [],
SQL> drop table DEV.ATTR_IDX$EX purge;
drop table DEV.ATTR_IDX$EX purge
ERROR at line 1:
ORA-00600: internal error code, arguments: [15265], [], [], [], [], [], [], [],
I guess this is because it had a parent table, which I dropped (I used "drop table <parent_table>", and it did not give me error, very strange).
SQL> select dbms_metadata.get_ddl('TABLE','ATTR_IDX$EX') from dual;
DBMS_METADATA.GET_DDL('TABLE','ATTR_IDX$EX')
CREATE TABLE "DEV"."ATTR_IDX$EX"
( "NODE_ID" NUMBER NOT NULL ENABLE,
"COL1" NUMBER,
FOREIGN KEY ("NODE_ID")
REFERENCES () ON DELETE CASCADE ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
MONITORING
Try to drop FK constraints yields the same error.
So now how can I drop this table table, any work around?
Thanks.

This is a bug. There is no Patch avaialble for this yet. This error is seen where recyclebin is enabled. Possible workaround is to disable the recyclebin.
This happens with the dictionary corruption due to inconsistency between obj$ and seg$.
This is a correct answer but still i would suggest to contact Oracle support.

ORA-06502: error when inserting into table via db link with long datatype

Folks,
I am getting the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
This occurs when an insert is done via a database link into a table that has a LONG data type for one of the columns, and the string contains some carriage returns and or line feeds.
I have checked by removing the db link, and inserting into a local table with identical column data types, where there is no error.
So this might be another db link bug?
So I need to remove the carriage returns and/or line feeds
in my pl/sql block in the page process. I have tried
l_text := REPLACE(l_text, CHR(10), ' ');
l_text := REPLACE(l_text, CHR(13), NULL);
but still getting the ORA-06502. Would really appreciate some advice here, please.
Cheers
KIM

Scott,
Time to 'fess up':
My fault sorry, the error was coming from another page process where I had allowed insufficient string length for one of the variables, and my error message did not identify the page process clearly.
This leads me to make a request for future releases, could the system error messages state which page process caused the problem?
One other thing I notice, and this might be a feature not a fault, the page processes are numbered: "Page Process: 3 of 5". However process 3 is not the 3rd one to be processed, and probably refers to the order in which they are created. Should the number reflect the process order?
Cheers
KIM

ORA-00942 error on truncating a table with a XML Index

Oracle Version: 11.2.0.1.0
When truncate command fails with error "ORA-00942: table or view does not exist" when run against a table with an XML Index defined
SQL> CREATE TABLE XML_TEST
2 (
3 ID INTEGER,
4 TESTXML SYS.XMLTYPE
5 );
Table created.
SQL> truncate table XML_TEST;
Table truncated.
SQL> CREATE INDEX xmlindex ON XML_TEST(TESTXML)
2 indextype IS xdb.xmlindex
3 parameters ('PATH TABLE MY_PATH_TABLE');
Index created.
SQL> truncate table XML_TEST;
truncate table XML_TEST
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> Drop Index xmlindex;
Index dropped.
SQL> truncate table XML_TEST;
Table truncated.

No, I don't think that explanation is correct. I don't think it has to do with user privs. besides, we don't
adjust rowids on an import -- we recreate the index, just like a b-tree index import would.
This should be working. It's most likely a bug in our (i.e. Text) import code -- SYS.XMLTYPE is a little
strange because under the covers it's actually a function-based index.
I will test it out and file a bug if I can reproduce the behavior on solaris.

ORA-31495, ORA-01401

I am using:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 Production
I have a script which select from an external table and inserts into a regular table the column this is causing this problem is defined as nvarchar2 (60) the max length of the value is 52 I get ORA-31495: error in synchronous change table on "user_name"."table_name"
ORA-01401: inserted value too large for column. If I remove two characters from the value I can do the insert.
Any ideas?
Message was edited by:
user452627

Not even using the external table anymore just tried:
UPDATE test_table
set text_value = 'Bonos de Banco Central en Dolares pagaderos en Pesos'
where
text_id = 9523
Does not work.
Added another column text_value2 nvarchar2(60)
UPDATE test_table
set text_value = 'Bonos de Banco Central en Dolares pagaderos en Pes',--os,
text_value2 = 'Bonos de Banco Central en Dolares pagaderos en Pesos'
where
text_id = 9523
And that works.

ORA-03115 error when calling a Stored Procedure

Hi All,
I'm in the process of porting a Pro/C app from NT to Linux. I've installed 8.1.5 on our Linux box and patched it up to 8.1.5.02.
It all kind of works ok, except that I'm sometimes getting ORA-03115 errors when the app calls a stored procedure. The call in question looks like this:
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR resprows[50][3998];
int numret = 0;
int numrows= 50;
int done= 0;
unsigned long resp_id = 0;
EXEC SQL END DECLARE SECTION;
EXEC SQL AT DB_NAME EXECUTE
BEGIN pkg_something.getdata(
:resp_id, /* IN */
:numrows, /* IN */
:done, /* OUT */
:resprows, /* OUT */
:numret /* OUT */
END;
END-EXEC;
The stored procedure basically uses the resp_id value to select rows from a table;
in each row there is a VARCHAR2(4000) column which it copies into the hostarray resprows.
There may be anything from 1 to numrows returned from the SP.
Initially, the resprows rows were defined to be size [4000]. Unfortunately, this caused ORA-02005 errors - I then changed the size to [3998], which seemed to fix the 02005's (although I'm unclear as to the reasons why).
Now I'm getting the 03115 errors when calling the SP. The oracle manual is not very helpful on what this error means.
This all works chipper on NT.
Any ideas?
Thanks in advance,
Nigel.
PS: The database the app is talking to is still hosted on NT.
null

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

ORA-22926 Error

We recently upgraded to 10g (using Oracle version 10.2.0.3.0).
The problem is that we're trying to enter multi-byte characters (Chinese characters) into our TGRAMS application. However, when we try to save
that text or ad data in the application, we get an "v_alltxtmstr" error (which is, according to one of our DBAs, an ora-22926 error). The changes then roll
back.
We know that the data fields in our TGRAMS application can handle the double-byte data because we've never had this problem before.
This error seemed to occur after we upgraded to 10g. However, we're not sure if this acutally an oracle problem. Perhaps there's a problem with the handoff from Foxpro to Oracle???
Our application is located on a PC that has a Chinese Operating Systerm (XP) and Office 2003 (Chinese). We copy and paste the Chinese text from a Word doc into the application.
We tried typing the text as well as pasting the document into word pad first before inserting it into the application.
So, we are at a lost. Any help you could provide would be appreciated.

Are you using trim properly?
IF lob_length > trim_length THEN
dbms_lob.trim(your_lob, trim_length)
END IF;Because you'll get ORA-22926 if the LOB length is < your trim specification.

ORA-01740: missing quotes error when synchronizing mobilink

Hi,
I'm getting a missing quotes error when synchronizing with mobilink.
followed by
[-10058] Unable to open download_delete_cursor
and the name of the table.
and name of the script
Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
How can I see what is causing this... I already checked the script for that table in the ml_scripts table.... nothing special there... the script looks exactly the same as in previous versions....
I'm assuming that it's the parameters that are creating the problem. but no idea on how to see them...
any suggestions?
thank you !

Hi,
thanks for your tip. I just did that and get a LOT of logging.
Not sure if my employer would appreciate me sharing DB details in public.
In private messaging I could send it through, but i guess that wouldn't help others with the same issue..
i also changed the startup parameters to -vt -o
And this is the result that I get (I modified scriptpackage name and cursorname a litle bit):
I'm guessing that : p1 and : p2 is incorrect as parameter....and the complaints come from there..
Also, this time I ran another publication and now it's complaining on the newly added table and not on that random old table I mentioned on my previous post.
PS. error message is in dutch since the server is in dutch, but it's the missing quotes issue.
I. 2014-03-31 15:36:26. <1> COMMIT Transaction: prepare_for_download
I. 2014-03-31 15:36:26. <1> Translated SQL:
                        CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (:p1, :p2)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10002] Consolidated database server or ODBC error: ODBC: [Sybase][iAnywhere Solutions - Oracle][Oracle]ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                        ORA-01740: Ontbrekend dubbele aanhalingsteken in identificatiesymbool.
                         (ODBC State = 42000, Native error code = 1740)
E. 2014-03-31 15:36:26. <1> [-10058] Unable to open download_delete_cursor
I. 2014-03-31 15:36:26. <1> Error Context:
I. 2014-03-31 15:36:26. <1> Remote ID: c44a5403-74ba-4c98-bf6d-4e1db5fb24c9
I. 2014-03-31 15:36:26. <1> User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Modified User Name: USR:66ed647c-20b1-4cff-9663-8147b0e7e2fd
I. 2014-03-31 15:36:26. <1> Transaction: download
I. 2014-03-31 15:36:26. <1> Table Name: MY_NEWLY_ADDED_TABLE
I. 2014-03-31 15:36:26. <1> Script Version: scriptversion
I. 2014-03-31 15:36:26. <1> Script: {CALL "scriptversion".DOWNLOAD_DELETE_CURSOR_ABC (?, ?)}
I. 2014-03-31 15:36:26. <1> End of Error Context
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_download
I. 2014-03-31 15:36:26. <1> ROLLBACK Transaction: end_synchronization

Getting ORA-01429 error while changing character set

When I am changing character set from WE8DEC to AL32UTF8, I am getting ORA-01429 error
SQL> ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8 ;
ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01429: Index-Organized Table: no data segment to store overflow row-pieces

Chockalingam wrote:
I am using above steps as per oracle doc only.
http://docs.oracle.com/cd/B10500_01/server.920/a96529/ch10.htm
No, you are not.
- You are not using the correct version doc vs. Oracle server version. Try to find the same suggestion in the relevant doc.
- The doc you reference specifically says "... it can be used only under special circumstances. The ALTER DATABASE CHARACTER SET statement does not perform any data conversion, so it can be used +if and only if the new character set is a strict superset of the current character set+." (emphasis is mine)
You do not have a strict superset.
- Also the special clauses you have used are not documented - for a reason.
Please edit your posts above to remove the ill-advice (steps with internal use only clauses) that does not belong on a forum.
Edited by: orafad on Mar 16, 2012 9:47 PM

ORA-31495 error in synchronous change table on "string"."string"

Similar Messages

Maybe you are looking for