ORA-39097: Data Pump job encountered unexpected error -39076
Hi Everyone,
Today i tried to take a export dump pump(table specific) from my test database, version is 10.2.0.4 on Solaris10(64-bit) and i got the following error message,
Job "SYSTEM"."SYS_EXPORT_TABLE_23" successfully completed at 09:51:36
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in KUPV$FT_INT.DELETE_JOB
ORA-39076: cannot delete job SYS_EXPORT_TABLE_23 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31632: master table "SYSTEM.SYS_EXPORT_TABLE_23" not found, invalid, or inaccessible
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 1079
ORA-20000: Unable to send e-mail message from pl/sql because of:
ORA-29260: network error: Connect failed because target host or object does not exist
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in MAIN
ORA-39076: cannot delete job SYS_EXPORT_TABLE_23 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31632: master table "SYSTEM.SYS_EXPORT_TABLE_23" not found, invalid, or inaccessible
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 1079
ORA-20000: Unable to send e-mail message from pl/sql because of:
ORA-29260: network error: Connect failed because target host or object does not exist
i hope the export dumpfile is valid one but i don't know why i am getting this error message. Does any one have faced this kind of problem. please advice me
Thanks
Shan
Once you see this:
Job "SYSTEM"."SYS_EXPORT_TABLE_23" successfully completed at 09:51:36The Data Pump job is done with the dumpfile. There is some clean up that is needed and it looks like something in the cleanup failed. Not sure what it was, but you dumpfile should be fine. One easy way to test it is to run impdp with sqlfile. This will do everything import will do, but instead of creating objects, it writes the ddl to the sql file.
impdp user/password sqlfile=my_test.sql directory=your_dir dupmfile=your_dump.dmp ...
If that works, then your dumpfile should be fine. The last thing the export does is write the Data Pump master table to the dumpfile. The first thing that import does is read that table in. So, if you can read it in (which impdp sqlfile does) your dump is good.
Dean
Similar Messages
-
ORA-39097: Data Pump job encountered unexpected error -12801
Hallo!I am running Oracle RAC 11.2.0.3.0 database on IBM-AIX 7.1 OS platform.
We normally do data pump expdp backups and we created a OS authenticated user and been having non-DBA users use this user (instead of / as sysdba which is only used by DBAs) to run expdp.This OS authenticated user has been working fine until it statrd gigin use error below
Export: Release 11.2.0.3.0 - Production on Fri Apr 5 23:08:22 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, Oracle Label Security,
OLAP, Data Mining, Oracle Database Vault and Real Application Testing optio
FLASHBACK automatically enabled to preserve database integrity.
Starting "OPS$COPBKPMG"."SYS_EXPORT_SCHEMA_16": /******** DIRECTORY=COPKBFUB_DIR dumpfile=COPKBFUB_Patch35_PreEOD_2013-04-05-23-08_%U.dmp logfile=COPKBFUB_Patch35_PreEOD_2013-04-05-23-08.log cluster=n parallel=4 schemas=BANKFUSION,CBS,UBINTERFACE,WASADMIN,CBSAUDIT,ACCTOPIC,BFBANKFUSION,PARTY,BFPARTY,WSREGISTRY,COPK
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 130.5 GB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SYNONYM/SYNONYM
Processing object type SCHEMA_EXPORT/DB_LINK
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/PACKAGE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/FUNCTION/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
Processing object type SCHEMA_EXPORT/PROCEDURE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/VIEW/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/VIEW/GRANT/CROSS_SCHEMA/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/VIEW/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type SCHEMA_EXPORT/MATERIALIZED_VIEW
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
. . exported "WASADMIN"."BATCHGATEWAYLOGDETAIL" 2.244 GB 9379850 rows
. . exported "WASADMIN"."UBTB_TRANSACTION" 13.71 GB 46299982 rows
. . exported "WASADMIN"."INTERESTHISTORY" 2.094 GB 13479801 rows
. . exported "WASADMIN"."MOVEMENTSHISTORY" 1.627 GB 13003451 rows
. . exported "WASADMIN"."ACCRUALSREPORT" 1.455 GB 18765315 rows
ORA-39097: Data Pump job encountered unexpected error -12801
ORA-39065: unexpected master process exception in MAIN
ORA-12801: error signaled in parallel query server PZ99, instance copubdb02dc:COPKBFUB2 (2)
ORA-01460: unimplemented or unreasonable conversion requested
Job "OPS$COPBKPMG"."SYS_EXPORT_SCHEMA_16" stopped due to fatal error at 23:13:37
Please assist.have you seen this?
*Bug 13099577 - ORA-1460 with parallel query [ID 13099577.8]* -
ERROR: Invalid data pump job state; one of: DEFINING or EXECUTING.
Hi all.
I'm using Oracle 10g (10.2.0.3) I had some scheduled jobs for export the DB with datapump. Some days ago they began to fail with the message:
ERROR: Invalid data pump job state; one of: DEFINING or EXECUTING.
Wait a few moments and check the log file (if one was used) for more details.
The EM says that I can't monitor the job because there's no master tables. How can I find the log?
I also founded in the bdump that exceptions occurred:
*** 2008-08-22 09:04:54.671
*** ACTION NAME:(EXPORT_ITATRD_DIARIO) 2008-08-22 09:04:54.671
*** MODULE NAME:(Data Pump Master) 2008-08-22 09:04:54.671
*** SERVICE NAME:(SYS$USERS) 2008-08-22 09:04:54.671
*** SESSION ID:(132.3726) 2008-08-22 09:04:54.671
kswsdlaqsub: unexpected exception err=604, err2=24010
kswsdlaqsub: unexpected exception err=604, err2=24010
* kjdrpkey2hv: called with pkey 114178, options x8
* kjdrpkey2hv: called with pkey 114176, options x8
* kjdrpkey2hv: called with pkey 114177, options x8
Some help would be appreciated.
Thanks.Delete any uncompleted or failed jobs and try again.
-
ORA-39080: failed to create queues "" and "" for Data Pump job
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');
EXCEPTION
WHEN OTHERS THEN
IF SQLCODE = -24001 THEN NULL;
ELSE RAISE;
END IF;
END;
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 7Snehashish Ghosh wrote:
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');does it work better when specifying an Oracle version that is from this Century; newer than V8.1? -
How fix iPhone encountered unexpected error 0xE8000001 install phase?
Please help ( if there is an iPhone developer forum somewhere please redirect me)!
I can not get even the sample "Hello World" application to download and run on my iPhone device. I have spent hours googling and messing around in the iPhone Developer Program Portal trying to figure out where I went wrong. I get the following error after I build and run:
"Your mobile device has encountered an unexpected error 0xE8000001 during the install phase: Verifying application"
"Try disconnecting and powering off"
Any tips, resources, or advice is much appreciated. I about to the point to consider wiping and reinstalling my Mac in a hope it may improve whatever I did wrong between SDK1-8.
Thanks in advance,
-EdThank you _very much_ for looking at my "Bundle identifier" syntax. I think I am getting closer. I removed the 10-digit prefix from the Info.plist "*Bundle identifier*" setting. My setting is now entered as seen below.
"*myapp.com.mycompany.${PRODUCT_NAME:identifier}*"
My new challenge is that when I build-and-go it displays the following message in the bottom-left:
"*Failed to start remote debugserver for (null) on Ed's Phone*"
Any advice is much appreciated and I appreciate all others who have added comment to this thread.
-Ed
For others that are having similar problesm, you can now print out the portal "How to" adventure game. On the portal home page is a link to the following PDF. I am planning on printing out and reading the whole thing and high-lighting all the important bits and steps.
http://adcdownload.apple.com/iphone/iphone_developer_program_user_guide/iphone_d eveloper_program_user_guide__standard_program.pdf
*A tip to check if you have a valid "Code Signing Identity" installed and entered in your project Build settings.*
1 - Select the root folder in your code project
2 - Press the "i" info icon on the tool bar
3 - Go to the *Build* tab
4 - The format of Code *Signing Identity->Any iPhone OS Device* setting is case sensitive and looks like: "*iPhone Developer: John Doe*"
5 - If it is correct, the associated provisioning profile will appear in the drop-down list of the Code Signing *Provisioning Profile->Any iPhone OS Device* setting. If you mess it up, do it intentionally by try adding an extra character, you should see the provisioning profile disappear from the list. If you see no change, you may have a bad developer name(wrong case?) or provisioning profile or profile install problem. -
Error data pump import: Worker unexpected fatal error in KUPW$WORKER.MAIN
Hello.
I try to import dump
impdp DIRECTORY=data_pump_dir DUMPFILE=04-2013.dmp TRANSFORM=OID:n LOGFILE=04-2013.dmp.log
(user - system (tried with sys) , (also with parallel=1 (or 2, or 8))and have following error:
Import: Release 11.2.0.1.0 - Production on Fri May 31 12:55:42 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW00" prematurely terminated
ORA-31671: Worker process DW00 had an unhandled exception.
ORA-39079: unable to enqueue message RQ
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPC$QUE_INT", line 965
ORA-00931: missing identifier
ORA-06512: at "SYS.KUPW$WORKER", line 16746
ORA-06512: at "SYS.KUPW$WORKER", line 19035
ORA-06512: at "SYS.KUPW$WORKER", line 8191
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.MAIN []
ORA-06512: at "SYS.KUPW$WORKER", line 1705
ORA-44002: invalid object name
ORA-06512: at line 2
How can I fix it?
Alert_log
Fri May 31 14:26:21 2013
DM00 started with pid=32, OS id=36385, job SYSTEM.SYS_IMPORT_FULL_03
Fri May 31 14:26:22 2013
DW00 started with pid=33, OS id=36387, wid=1, job SYSTEM.SYS_IMPORT_FULL_03
DW00 terminating with fatal err=39079, pid=33, wid=1, job SYSTEM.Also there is some invalid objects in SYS:
SYS.DBMS_SQLTUNE_INTERNAL
SYS.DBMS_SQLTUNE
SYS.DBMS_WRR_INTERNAL
SYS.DBMS_WORKLOAD_REPLAY
SYS.PRVT_SQLPA
SYS.DBMS_SMB_INTERNAL
WMSYS.LTUTIL
WMSYS.LTADM
WMSYS.UD_TRIGS
WMSYS.OWM_DDL_PKG
WMSYS.OWM_MIG_PKG
EXFSYS.DBMS_EXPFIL_DR
EXFSYS.DBMS_EXPFIL
EXFSYS.ADM_EXPFIL_SYSTRIG
CTXSYS.DRVDDL
XDB.DBMS_XDBZ0
XDB.DBMS_XSLPROCESSOR
XDB.DBMS_XDBUTIL_INT
XDB.DBMS_CSX_ADMIN
EXFSYS.DBMS_RLMGR_UTL
EXFSYS.DBMS_RLMGR_IR
EXFSYS.DBMS_RLMGR_IRPK
EXFSYS.DBMS_RLMGR_DEPASEXP
MDSYS.SDO_CS
SYSMAN.EMD_MAINTENANCE
SYSMAN.MGMT_ADMIN_DATAhere are trace files [http://files.mail.ru/B05EBC4402A342D0AE1E88BFB04191DB|http://files.mail.ru/B05EBC4402A342D0AE1E88BFB04191DB]
error here:
KUPM:12:47:19.571: Error detected by MCP
KUPM:12:47:19.572: ORA-39014: One or more workers have prematurely exited.
KUPM:12:47:19.572: ORA-39029: worker 1 with process name "DW00" prematurely terminated
KUPM:12:47:19.572: ORA-31671: Worker process DW00 had an unhandled exception.
ORA-39079: unable to enqueue message RQ
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPC$QUE_INT", line 965
ORA-00931: missing identifier
ORA-06512: at "SYS.KUPW$WORKER", line 16746
ORA-06512: at "SYS.KUPW$WORKER", line 19035
ORA-06512: at "SYS.KUPW$WORKER", line 8191
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.MAIN []
ORA-06512: at "SYS.KUPW$WORKER", line 1705
ORA-44002: invalid object name
ORA-06512: at line 2
KUPM:12:47:19.577: In restart_worker for worker 1...
KUPM:12:47:19.577: Error being processed is: -26457
KUPM:12:47:19.577: worker id is:
KUPM:12:47:19.577: Worker error is: 0
KUPM:12:47:19.577: Exited main loop...
KUPM:12:47:19.577: Returned to MAIN
KUPV:12:47:19.577: Update request for job: SYSTEM.SYS_IMPORT_FULL_03, func: 1
KUPM:12:47:19.578: Entered state: UNDEFINED
KUPM:12:47:19.578: In RESPOND_TO_START
KUPC:12:47:19.578: Before ENQ: Sending Type: 2041 ID:
KUPC:12:47:19.578: RP,KUPC$C_1_20130603124648,MCP,KUPC$A_1_20130603124649,10,Y
kwqberlst !retval block
kwqberlst rqan->lagno_kwqiia 5
kwqberlst rqan->lascn_kwqiia > 0 block
kwqberlst rqan->lascn_kwqiia 5
kwqberlst ascn 2375213 lascn 22
KUPM:12:47:19.579: In check_workers...
KUPM:12:47:19.579: Live worker count is: 0
KUPM:12:47:19.579: worker id is:
KUPM:12:47:19.579: Worker error is: 0
KUPM:12:47:19.579: Job is completing -
Can't "stop" data pump job via dbms_datapump
DBMS_DATAPUMP.101
I have a job I have OPENd, but never started. How do I get rid of it?
SQL> declare
2 v_handle number;
3
4 begin
5
6 v_handle := DBMS_DATAPUMP.ATTACH('RefreshFromDev','SYSTEM')
7 DBMS_DATAPUMP.STOP_JOB(v_handle );
8
9 end;
10 /
declare
ERROR at line 1:
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 911
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3279
ORA-06512: at line 6
SQL> SELECT JOB_NAME, OWNER_NAME , STATE FROM DBA_DATAPUMP_JOBS;
JOB_NAME
OWNER_NAME
STATE
RefreshFromDev
SYSTEM
DEFINING
Obviously the job exists. I've tried issuing another Open with the same name and It complains that the job already exists. As I understand it, I have to attach to the job and issue a stop_iob in order to dispose of it.
Thanks
SteveOK, mystery solved, sort of. If I close my sqlplus session, and log in again, issuing the same sql, it works.
I suppose I should read the message "job does not exist" as something like "already attached to a job, detach or disconnect"
Can anyone shed some light on this? I guess it means you can only attach to one job per session, or that only one handle can be issued per job per session. But I'm only guessing.
Thanks,
Steve -
HT1926 How do I solve the for the itunes Install encountering "unexpected errors" and won't complete
Every time I try to insatll iTunes it fails at the very end with the error in the subject line. No other explanation is given.
Here is the dialogue diplayed at the end of installation. Thanks for any ideas or assistance you can provide.
-
Data pump import issue in Oracle 10gR2
Hi DBAs,
Please help me identifying the data pump issue I am facing in one of our Oracle 10g R2 database
Below is error message from the import log file
Job "SYS"."SYS_IMPORT_TABLE_06" completed with 62 error(s) at 18:20:20
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in KUPV$FT_INT.DELETE_JOB
ORA-39076: cannot delete job SYS_IMPORT_TABLE_06 for user SYS
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31635: unable to establish job resource synchronization
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in MAIN
ORA-39076: cannot delete job SYS_IMPORT_TABLE_06 for user SYS
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31635: unable to establish job resource synchronization
Please suggest me a workaround and root cause of this issue. Thanks.
Regards,
Arunuser13344783 wrote:
Hi DBAs,
Please help me identifying the data pump issue I am facing in one of our Oracle 10g R2 database
Below is error message from the import log file
Job "SYS"."SYS_IMPORT_TABLE_06" completed with 62 error(s) at 18:20:20
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in KUPV$FT_INT.DELETE_JOB
ORA-39076: cannot delete job SYS_IMPORT_TABLE_06 for user SYS
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31635: unable to establish job resource synchronization
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in MAIN
ORA-39076: cannot delete job SYS_IMPORT_TABLE_06 for user SYS
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31635: unable to establish job resource synchronization
Please suggest me a workaround and root cause of this issue. Thanks.
Regards,
ArunPost complete command line of expdp that made the dump file & the impdp that threw these errors -
Using Data Pump when database is read-only
Hello
I used flashback and returned my database to the past time then I opened the database read only
then I wanted use data pump(expdp) for exporting a schema but I encounter this error
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYS.SYS_EXPORT_SCHEMA_05"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 863
ORA-16000: database open for read-only access
but I could by exp, export that schema
My question is that , don't I can use Data Pump while database is read only ? or do you know any resolution for the issue ?
thanksYou need to use NETWORK_LINK, so the required tables are created in a read/write database and the data is read from the read only database using a database link:
SYSTEM@db_rw> create database link db_r_only
2 connect to system identified by oracle using 'db_r_only';
$ expdp system/oracle@db_rw network_link=db_r_only directory=data_pump_dir schemas=scott dumpfile=scott.dmpbut I tried it with 10.2.0.4 and found and error:
Export: Release 10.2.0.4.0 - Production on Thursday, 27 November, 2008 9:26:31
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-02054: transaction 1.36.340 in-doubt
ORA-16000: database open for read-only access
ORA-02063: preceding line from DB_R_ONLY
ORA-39097: Data Pump job encountered unexpected error -2054
I found in Metalink the bug 7331929 which is solved in 11.2! I haven't tested this procedure with prior versions or with 11g so I don't know if this bug only affects to 10.2.0.4 or 10* and 11.1*
HTH
Enrique
PS. If your problem was solved, consider marking the question as answered. -
Export: ORA-39097 ORA-39065 ORA-01403
Hello Gurus
I am getting below error for export,
nohup expdp system/password@BROOM SCHEMAS=CWA directory=DATAPUMP dumpfile=broom.dmp logfile =broom.log &Error
Export: Release 11.2.0.3.0 - Production on Fri Mar 1 11:40:04 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39097: Data Pump job encountered unexpected error 100
ORA-39065: unexpected master process exception in DISPATCH
ORA-01403: no data foundVersion
11:46:49 : 01-MAR-13 @ SYS (TAMCW2) SQL>select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Productionuser3636719 wrote:
Hello Gurus
I am getting below error for export,
nohup expdp system/password@BROOM SCHEMAS=CWA directory=DATAPUMP dumpfile=broom.dmp logfile =broom.log &
logfile =broom.log &above shows undesired space character to left of equal sign -
Hi,
getting below error while running expdp.
ORA-39097: Data Pump job encountered unexpected error -31641
ORA-39065: unexpected master process exception in DISPATCH
ORA-31641: unable to create dump file "/netbackup_216/EXPDP_HEALTHDB_Full/11EXPDPBACKUP_PHCLMDBbkup_2013_07_03.dmp"
ORA-27086: unable to lock file - already in use
IBM AIX RISC System/6000 Error: 13: Permission denied
Additional information: 8
Additional information: 205012
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 4 with process name "DW07" prematurely terminated
ORA-31673: worker process interrupt for normal exit by master process
ORA-06512: at "SYS.KUPW$WORKER", line 1714
ORA-06512: at line 2yes,i am using parallel =4 option .
export ORACLE_SID=PHCLMDB
export date=bkup_$(date +%Y_%m_%d)
OSID=$ORACLE_SID
export filenm=EXPDPBACKUP_$OSID$hypn$date
echo $filenm
rm -rf /netbackup_216/EXPDP_HEALTHDB_Full/*.dmp
expdp system directory=PHCLMDB_EXP dumpfile=$filenm.dmp,1$filenm.dmp,2$filenm.dmp,3$filenm.dmp,4$filenm.dmp,5$filenm.dmp,6$filenm.dmp,7$filenm.dmp,8$filenm.dmp,9$filenm.dmp,10$filenm.dmp,11$filenm.dmp,12$filenm.dmp,13$filenm.dmp,14$filenm.dmp,15$filenm.dmp,16$filenm.dmp,17$filenm.dmp,18$filenm.dmp,19$filenm.dmp,20$filenm.dmp,21$filenm.dmp,22$filenm.dmp,23$filenm.dmp,24$filenm.dmp,25$filenm.dmp,26$filenm.dmp,27$filenm.dmp,28$filenm.dmp,29$filenm.dmp,30$filenm.dmp,31$filenm.dmp,32$filenm.dmp,33$filenm.dmp,34$filenm.dmp,35$filenm.dmp,36$filenm.dmp,37$filenm.dmp,38$filenm.dmp,39$filenm.dmp,40$filenm.dmp,41$filenm.dmp,42$filenm.dmp,43$filenm.dmp,44$filenm.dmp,45$filenm.dmp,46$filenm.dmp,47$filenm.dmp,48$filenm.dmp,49$filenm.dmp,50$filenm.dmp,51$filenm.dmp,52$filenm.dmp,53$filenm.dmp,54$filenm.dmp,55$filenm.dmp,56$filenm.dmp,57$filenm.dmp,58$filenm.dmp,59$filenm.dmp,60$filenm.dmp,61$filenm.dmp,62$filenm.dmp,63$filenm.dmp,64$filenm.dmp,65$filenm.dmp,66$filenm.dmp,67$filenm.dmp,68$filenm.dmp,69$filenm.dmp,70$filenm.dmp,71$filenm.dmp,72$filenm.dmp,73$filenm.dmp,74$filenm.dmp,75$filenm.dmp,76$filenm.dmp,77$filenm.dmp logfile=$filenm.log full=y parallel=4 filesize=3000M -
Data pump import from 11g to 10g
I have 2 database: first is 11.2.0.2.0 and second is 10.2.0.1.0
In 10g i created database link on 11g
CREATE DATABASE LINK "TEST.LINK"
CONNECT TO "monservice" IDENTIFIED BY "monservice"
USING '(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = port))) (CONNECT_DATA = (SID = sid)))';
And execute this query for test dbLink which work fine:
select * from v$[email protected];
After it i try to call open function:
declare
h number;
begin
h := dbms_datapump.open('IMPORT', 'TABLE', 'TEST.LINK', null, '10.2');
end;
and get exception: 39001. 00000 - "invalid argument value"
if i remove 'TEST.LINK' from the arguments it works fine
Edited by: 990594 on 26.02.2013 23:41Hi Richard Harrison,
result for import from 11g to 10g:
impdp user/pass@dburl schemas=SCHEMANAME network_link=TEST_LINK version=10.2
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORA-39001: invalid argument value
ORA-39169: Local version of 10.2.0.1.0 cannot work with remote version of 11.2.0.2.0
result for export from 11g to 10g:
expdp user/pass@dburl schemas=SCHEMANAME network_link=TEST_LINK version=10.2
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing option
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-04052: error occurred when looking up remote object SYS.KUPM$MCP@TEST_LINK
ORA-00604: error occurred at recursive SQL level 3
ORA-06544: PL/SQL: internal, error, arguments: [55916], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [55916]
ORA-02063: preceding 2 lines from TEST_LINK
ORA_39097: Data Pump job encountered unexpected error -4052 -
Data pump error ORA-39065, status undefined after restart
Hi members,
The data pump full import job hung, continue client also hung, all of a sudden the window exited.
;;; Import> status
;;; Import> help
;;; Import> status
;;; Import> continue_client
ORA-39065: unexpected master process exception in RECEIVE
ORA-39078: unable to dequeue message for agent MCP from queue "KUPC$C_1_20090923181336"
Job "SYSTEM"."SYS_IMPORT_FULL_01" stopped due to fatal error at 18:48:03
I increased the shared_pool to 100M and then restarted the job with attach=jobname. After restarting, I have queried the status and found that everything is undefined. It still says undefined now and the last log message says that it has been reopened. Thats the end of the log file and nothing else is being recorded. I am not sure what is happening now. Any ideas will be appreciated. This is 10.2.0.3 version on windows. Thanks ...
Job SYS_IMPORT_FULL_01 has been reopened at Wednesday, 23 September, 2009 18:54
Import> status
Job: SYS_IMPORT_FULL_01
Operation: IMPORT
Mode: FULL
State: IDLING
Bytes Processed: 3,139,231,552
Percent Done: 33
Current Parallelism: 8
Job Error Count: 0
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest%u.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest01.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest02.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest03.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest04.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest05.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest06.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest07.dmp
Dump File: D:\oracle\product\10.2.0\admin\devdb\dpdump\devtest08.dmp
Worker 1 Status:
State: UNDEFINED
Worker 2 Status:
State: UNDEFINED
Object Schema: trm
Object Name: EVENT_DOCUMENT
Object Type: DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Completed Objects: 1
Completed Rows: 78,026
Completed Bytes: 4,752,331,264
Percent Done: 100
Worker Parallelism: 1
Worker 3 Status:
State: UNDEFINED
Worker 4 Status:
State: UNDEFINED
Worker 5 Status:
State: UNDEFINED
Worker 6 Status:
State: UNDEFINED
Worker 7 Status:
State: UNDEFINED
Worker 8 Status:
State: UNDEFINED39065, 00000, "unexpected master process exception in %s"
// *Cause: An unhandled exception was detected internally within the master
// control process for the Data Pump job. This is an internal error.
// messages will detail the problems.
// *Action: If problem persists, contact Oracle Customer Support. -
Need Help in expdp for resolving ORA-39127: unexpected error from call
Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
ShanHi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC
Maybe you are looking for
-
How do I copy and paste to my mac and undo the change attributes. On my ipad I can shake it and undo the change attributes but not sure how to do this on the imac? Example Excel to email and undo changes?
-
Modifiers in Collection List Renderer to display word wrapping
Hello Is it possible to display the folder/files description in word wrap mode? I set the parameter "rndVisibleProperties" with the following value: rnd:image(alignLeft/contentLink/alignBaseline), rnd:displayname(contentLink/[2;1])+rnd:action, rnd:de
-
Invalid identifier.. while using select statemetn
Hello guys, i have installed oracle 11g data guard with a primary and 2 standby databases (physical and logical) when i issue these statements against the standby database i get an error as shown below: SELECT DBMS_LOGSTDBY.MAP_PRIMARY_SCN (PRIMARY_S
-
How to install Bootcamp update, if this is it.
I Downloaded the lastest Windows support software from apple, I put all the files on my iOS desktop, but now what do I do, is Bootcamp already updated? Where did I did this, if someone is wondering. http://gyazo.com/a83f2156b3510d883b64ae5eafc16efe D
-
Display success message when validate is successful
This sounds like the simplest thing but there is no box to put a success message in for validates. I have a text area that resets a database password, I would like to display "password changed successfully" in the region of the page this is on. I've