Ora error from Oracle

Hi , its really amazing to see this error from Oracle site .
ORA-04063: package body "WEB_PROD.SHOW_DESC" has errors ORA-06508: PL/SQL: could not find program unit being called: "WEB_PROD.SHOW_DESC" ORA-06512: at "WEB_PROD.OUGBS_WEBREG_UTILS", line 3 ORA-06512: at "WEB_PROD.OU_BRIDGE_PAGESCSS", line 309 ORA-04063: package body "WEB_PROD.SHOW_DESC" has errors ORA-06508: PL/SQL: could not find program unit being called: "WEB_PROD.SHOW_DESC" Ref:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=84&group_id=9
Regards,
Mohammed Mehraj

It does happen some times. Not an unusual thing. Even at times , on Asktom too, errors come, very rare though!
Aman....

Similar Messages

DB Link Error from Oracle to Mysql

Hi ,
I have created the dblink from oralce to mysql using note id 1320645.1
I am getting the below error while connecting to the mysql using the dblink
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][MySQL][ODBC 5.1 Driver]Access denied for user 'user'@'xxxx.xxxx.xxxx'
(using password: YES) {HY000,NativeErr = 1045}
ORA-02063: preceding 2 lines from MYODBC5
Please help me to slove the error
Thanks in Advance
Sudheer

Sudheer,
the error message is self explaining - your user 'user' connecting from the host @'xxxx.xxxx.xxxx' is not allowed to log into the MySQL database. To solve this issue you need to grant permissions to the user so that he can connect from any host (%) or just from that particular host where you installed the gateway.
The command to allow access from everywhere would be:
grant all on *.* TO '<user>'@'%' IDENTIFIED BY '<password>';
or just specify the IP address instead of '%' if you want to restrict it.
More details can be found in the MySQL manual:
MySQL :: MySQL 5.1 Reference Manual :: 6.2.7 Causes of Access-Denied Errors
- Klaus

Import error from oracle 10.1.0 to oracle 10. 2.0

Hi
I am importing schema from oracle 10.1.0 to oracle 10.2.0.
my all objects are imported successfully except foreign key constraints.
my error are like
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 5167
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"PRODUCTID"', NULL ,NULL,NULL,0"
",0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"PRODUCT_CODE"', NULL ,NULL,NUL"
"L,0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"PRODUCT_NAME"', NULL ,NULL,NUL"
"L,0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"SHORT_DESC"', NULL ,NULL,NULL,"
"0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"DESCRIPTION"', NULL ,NULL,NULL"
",0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"PRODUCTLIMG"', NULL ,NULL,NULL"
",0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encountered
ORA-20001: Invalid or inconsistent input values
ORA-06512: at "SYS.DBMS_STATS", line 4194
ORA-06512: at line 1
IMP-00017: following statement failed with ORACLE error 20001:
"DECLARE SREC DBMS_STATS.STATREC; BEGIN SREC.MINVAL := NULL; SREC.MAXVAL :="
" NULL; SREC.EAVS := 0; SREC.CHVALS := NULL; SREC.NOVALS := DBMS_STATS.NUMAR"
"RAY(0,0); SREC.BKVALS := DBMS_STATS.NUMARRAY(0,1); SREC.EPC := 2; DBMS_STAT"
"S.SET_COLUMN_STATS(NULL,'"PRODUCT_MASTER"','"PRODUCTMIMG"', NULL ,NULL,NULL"
",0,0,0,srec,0,6); END;"
IMP-00003: ORACLE error 20001 encounteredthanks

you can import the stats with importing objects , you can pass parameter STATISTICS =none ( do not import the stats).
STATISTICS -- import precomputed statistics (always)
Try this.
--Girish

How to exclude some ORA error from OEM monitoring

Hi,
We have been getting ORA-3217 alerts and to avoid them we have specified like this in metric and policy settings..
Warning ------ORA-0*(600?|7445|4[0-9] [0-9] [0-9])(?!3217)[^0-9]
critical---ORA-[0-9]*[^0-9]*(?!3217)
since then it stopped sending all ORA alerts, anything wrong in the above thresold.
Regards
Edited by: user602441 on Aug 13, 2009 8:42 AM

I have the similar problem. I have ORA- in the Critical threshold and I just want to exclude ORA-00060 from critcial threshold. What will be the syntax for that? I do not want to filter it. I still want to recieve it as warning.
Thanks
Rinky
Edited by: user11991081 on Oct 15, 2009 3:20 PM

Database Link Error: From Oracle to SQL Servre

Hi,
I am trying to create a database link from my Oracle database to SQL Server. Oacle is 11gR2 on windows 2012 64-Bit same is the OS for SQL Server.
When i execute the query using link, this is the error what i get:
*ORA-28545: error diagnosed by Net8 when connecting to an agent*
*Unable to retrieve text of NETWORK/NCR message 65535*
*ORA-02063: preceding 2 lines from PMS2KPI*
When i look for this error in *listener.ora* file, this is what i found
30-OCT-2014 09:51:48 * (CONNECT_DATA=(SID=pms2kpi)(CID=(PROGRAM=)(HOST=GARMCO\GRBHORDB01)(USER=GARMCO\PMS2Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::54d2:d482:edf0:8543%12)(PORT=52016)) * establish * pms2kpi * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
   64-bit Windows Error: 2: No such file or directory
30-OCT-2014 09:51:48 * (CONNECT_DATA=(SID=pms2kpi)(CID=(PROGRAM=)(HOST=GARMCO\GRBHORDB01)(USER=GARMCO\PMS2Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.107.145.26)(PORT=52017)) * establish * pms2kpi * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
   64-bit Windows Error: 2: No such file or directory
Thu Oct 30 09:52:58 201
When I look for the details in *alert.log* file, i find this
HS: Unable to establish RPC connection to HS Agent...
HS: ... Agent SID = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=GRBHORDB01.garmco.local)(Port=1521)))(CONNECT_DATA=(SID=pms2kpi))),
NCR error = 65535 Unable to retrieve text of NETWORK/NCR message 65535
Thu Oct 30 09:52:25 2014
My configuration seems to be ok....
*initpms2kpi.ora file*
#HS_FDS_CONNECT_INFO=[GRBHSQDB01.garmco.local]/KPI
HS_FDS_CONNECT_INFO="SERVER=GRBHSQDB01;DATABASE=KPI"
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=HS_RECOVERY
HS_FDS_RECOVERY_PWD=********
HS_FDS_TRANSACTION_LOG=HS_TRANSACTION_LOG
HS_FDS_TRANSACTION_MODEL=COMMIT_CONFIRM
HS_COMMIT_POINT_STRENGTH=0
*Listener.ora file*
    (SID_DESC =
      (SID_NAME = pms2kpi)
      (ORACLE_HOME = C:\App\Oracle\product\11.2.0\dbhome_1)
      (program = tg4msql)
*tnsnames.ora file*
pms2kpi =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (COMMUNITY = tcp.world) (PROTOCOL = TCP)(Host = GRBHORDB01.garmco.local)(Port = 1521))
    (CONNECT_DATA =
      (SID = pms2kpi)
   (HS=OK)
How can I check if some firewall is blocking the connection, or its a port issue... or maybe something wrong in the configuration, but chances are very less for this.
Kindly help if you have gone thru such an error.
Regards, Imran

Hi,
In the listener.ora you have -
   (program = tg4msql)
but with 11g gateways the executable name has been changed and you should change the entry to -
   (program = dg4msql)
then stop and start the listener.
If you installed the gateway into an existing ORACLE_HOME then the gateway version must be the same version as the software already installed.
For example, if the existing software was 11.2.0.4 and you installed 11.2.0.1 gateway this will give you problems and most likely the gateway executable will be 0 (zero) in size.
Regards,
Mike

Connection error from Oracle 9i JDeveloper to Oracle 9i

Hi,
I have the oracle 9i database installed on my local box.
I have Oracle 9i JDeveloper installed 2. I am trying to configure a connection from JDeveloper to Oracle 9i.
I get the following error message:
Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153092352)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153092352)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
void oracle.jdbc.dbaccess.DBError.throwSqlException(java.lang.String, java.lang.String, int)
DBError.java:187
void oracle.jdbc.dbaccess.DBError.throwSqlException(int, java.lang.Object)
DBError.java:229
void oracle.jdbc.dbaccess.DBError.throwSqlException(java.io.IOException)
DBError.java:342
void oracle.jdbc.driver.OracleConnection.<init>(oracle.jdbc.dbaccess.DBAccess, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
OracleConnection.java:415
java.sql.Connection oracle.jdbc.driver.OracleDriver.getConnectionInstance(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.util.Properties)
OracleDriver.java:485
java.sql.Connection oracle.jdbc.driver.OracleDriver.connect(java.lang.String, java.util.Properties)
OracleDriver.java:337
java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties, java.lang.ClassLoader)
DriverManager.java:517
java.sql.Connection java.sql.DriverManager.getConnection(java.lang.String, java.util.Properties)
DriverManager.java:146
java.sql.Connection oracle.jdeveloper.cm.JdbcConnectionWrapper.createConnectionImpl(java.lang.String, java.lang.String, java.util.Properties)
JdbcConnectionWrapper.java:146
void oracle.jdeveloper.cm.JdbcConnectionWrapper.createConnection(oracle.jdeveloper.cm.ConnectionDescriptor)
JdbcConnectionWrapper.java:110
java.sql.Connection oracle.jdeveloper.cm.JdbcConnectionWrapper.getJdbcConnection()
JdbcConnectionWrapper.java:175
java.lang.Object oracle.jdeveloper.cm.JdbcConnectionWrapper.getPresentation(java.lang.String)
JdbcConnectionWrapper.java:162
void oracle.jdevimpl.cm.dt.browser.jdbc.JdbcBrowser.openConnectionBrowser(oracle.jdeveloper.cm.dt.ConnectionBrowsable)
JdbcBrowser.java:133
java.lang.Object oracle.jdeveloper.cm.dt.ConnectionNode$NodeOpen.doWork()
ConnectionNode.java:202
void oracle.jdeveloper.cm.dt.ProgressRunnable.run()
ProgressRunnable.java:193
void oracle.ide.dialogs.ProgressBar.run()
ProgressBar.java:527
void java.lang.Thread.run()
Thread.java:484
My Classpath looks like this:C:\oracle\ora92\bin;C:\oracle\ora92\jdbc\lib;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;

Either the SID you specified is wrong or the DB listener is not configured correctly
See ORA-12505
http://www.cryer.co.uk/brian/oracle/ORA12505.htm

File open error from oracle directory

Hi
I am testing 11g new feature for oracle secure file on my winxp system. Using the same example from Arup Nanda's writeup. it is giving me the following error, what could be the reason, need your experts assistance.
SQL> conn checkup/checkup
Connected.
SQL> create directory SECFILE as 'c:\oracle';
Directory created.
Elapsed: 00:00:00.04
SQL> grant all on directory secfile to public;
Grant succeeded.
Elapsed: 00:00:00.00
SQL> declare
2 l_size number;
3 l_file_ptr bfile;
4 l_blob blob;
5 begin
6 l_file_ptr := bfilename('SECFILE','contract.pdf');
7 dbms_lob.fileopen(l_file_ptr);
8 l_size := dbms_lob.getlength(l_file_ptr);
9 insert into contracts_sec
10 (
11 contract_id,
12 contract_name,
13 file_size,
14 orig_file
15 )
16 values
17 (
18 1,
19 'Contract :'||1,
20 null,
21 empty_blob()
22 )
23 returning orig_file into l_blob;
24 dbms_lob.loadfromfile(l_blob, l_file_ptr, l_size);
25 commit;
26 dbms_lob.close(l_file_ptr);
27 end;
28 /
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 635
ORA-06512: at line 7
Elapsed: 00:00:00.01
SQL>The OS directory SECFILE is already available under 'c:\oracle' and the .pdf file is available under 'c:oracle\secfile'
Rgds
Suman

Hi
The OS directory SECFILE is already available under 'c:\oracle' and the .pdf file is available under 'c:oracle\secfile'Why its under 'c:oracle\secfile'? It should be under 'c:oracle\' ...SECFILE is the name of the directory in Oracle not on OS. So your pdf should be at 'c:oracle\'.
Regards

Handle Oracle Error from Oracle Forms

Actually I have a form with all types of validation and Id will be auto-generated by forms.
Now if any oracle error occures after pre-insert, auto-generated number will generate but record is not saving.
I want to handle this oracle error in my form and nullify the auto-generated ID forcefully.
Edited by: Sudipto Nag on Sep 16, 2008 12:07 PM

The way we handle database error generally is this:
You should in any case have a NOT NULL constraint on the database column. In the ON-ERROR trigger, we then check for the dbms_error_code value to see, what error message the database returned, after checking for Forms returning the general trigger exception 40735. For example, to trap a NOT NULL constraint voilation, you would do something like this.
if error_code= 40735 then --Forms error code = "Trigger raised unhandled exception".
if dbms_error_code in (-1400, -1407) then --mandatory not null column missing
    --do something, like alerting the user
elsif dbms_error_code in (<other DBMS error codes goes here>) then
    --do something else
end if;
end if;I believe this is what you are looking for. Hope it helps.
Regards,
Jacob

Unknown error from Oracle OD - Not applicable (SBL-ODS-50751)

Hi,
I am getting this error at certain actions in On Demand.
e.g. While saving a record, or while clicking Update Opportunities Button etc.
The error is:
"Message from webpage" is the title of the message box
Not applicable (SBL-ODS-50751) is message box text.
I didnt find this error code anywhere in forums/google.
Has anyone come across this or any idea what causes this?
I am facing this error in a trial account...however I dont think that matters anyway....
Regards,
Sumeet.

Sumeet, I would recommend that you contact CRM On Demand customer care in reference to this issue.

Error: ORA-03113 while executing complex java code from Oracle PL/SQL

Hi,
I am trying to execute a complex java code from Oracle PL/SQL. The classes were resolved successfully. But in the middle of execution, I am getting the following error:
ERROR:
ORA-03114: not connected to ORACLE
begin
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 13685
Session ID: 21 Serial number: 20
Is there a way to debug the Java classes loaded into oracle? Or is there any utility to find out why the connection was lost?
Regards,
Saravana

Hi Saravana:
You could use simply System.out.println(..) at your Java code and see the output at the .trc files generated for your Oracle session.
Or better than this adding Java Util Logging messages at your code, to see how to use JUL API at the OJVM please see this blog post [Using JUL API inside the OJVM|http://marceloochoa.blogspot.com/2007/11/getting-logging-entering-exiting-and.html].
Best regards, Marcelo.
PD: ora-0600 generally are associated with RDBMS bugs, but these bugs can be bypassed by replacing the code which throws the exception by other with a workaround.

RMAN-06004:ORACLE error from recovery catalog ... ORA-00904: : invalid ...

Good Morning All,
One of our RMAN backups is failing with the following error message. Any suggestions would be greatly appreciated.
==================================================================================================
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Edited by: ORA_UMAIR on Dec 31, 2008 7:51 AM

This Oracle Database is 9.2.0.6.0. Here is the complete log file. The RMAN script that I am using ran successfully many times before.
====================================================================================================
Recovery Manager: Release 9.2.0.6.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN>
connected to recovery catalog database
RMAN>
connected to target database: CUSTPR (DBID=525071053)
RMAN>
RMAN> #########################################################################
2> # LEVEL 0 BACKUP #
3> #########################################################################
4>
5> # Configure backups to be written to disk.
6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
old RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Set the retention policy to a recovery window of 7 days. This ensures that
2> # RMAN retains all backups needed to recover the database to any point in time
3> # in the last 7 days. You can use the DELETE OBSOLETE command to delete
4> # backups that are no longer required by the retention policy. To exclude a
5> # backup from consideration by the policy, you can use KEEP option with the
6> # BACKUP command.
7> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to use two disk channels for backup, restore, recovery, and
2> # maintenance operations.
3> CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
old RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write disk backups to the /backup directory.
2> # The format specifier %t is replaced with a 4-byte timestamp, %s with the
3> # backup set number, and %p with the backup piece number.
4> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to back up the control file after each backup.
2> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Configure RMAN to write controlfile autobackups to the /backup directory.
2> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Enable the backup optimization feature introduced in 9i to make sure that
2> # RMAN won't backup an archivelog or datafile if there already exists a backup
3> # of that file. The FORCE option can be used to override optimization on a
4> # specific BACKUP command.
5> CONFIGURE BACKUP OPTIMIZATION ON;
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
RMAN>
RMAN> # Use the SHOW ALL command to see the current configuration settings.
2> SHOW ALL ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%d_bkp_cf%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/backups/admin/custpr/%d_bkp_cf%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 1;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' FORMAT '%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/orahome2/custprdb/9.2.0/dbs/snapcf_custpr.f'; # default
RMAN>
RMAN> # The following commands are run each day to start the backup cycle.
2> # The steps are:
3> # - Take an incremental level 0 backup of the database. A level 0 backup is
4> # a complete backup of the entire file which can be used as the basis
5> # for a subsequent incremental backup.
6> # - Backup all archivelogs that have not already been backed up.
7> # - Delete on-disk archivelogs older than seven days.
8>
9> BACKUP INCREMENTAL LEVEL 0 FORMAT '/backups/admin/custpr/%d_bkp_df%t_Set%s_Piece%p'
10> DATABASE maxsetsize 33G
11> PLUS ARCHIVELOG FORMAT '/backups/admin/custpr/%d_bkp_al%t_Set%s_Piece%p'
12> delete all input;
Starting backup at 12/30/2008 22:01:40
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=8008 recid=7910 stamp=674638862
input archive log thread=1 sequence=8009 recid=7911 stamp=674671207
input archive log thread=1 sequence=8010 recid=7912 stamp=674697380
input archive log thread=1 sequence=8011 recid=7913 stamp=674780433
input archive log thread=1 sequence=8012 recid=7914 stamp=674784211
input archive log thread=1 sequence=8013 recid=7915 stamp=674863288
input archive log thread=1 sequence=8014 recid=7916 stamp=674863300
channel ORA_DISK_1: starting piece 1 at 12/30/2008 22:01:41
channel ORA_DISK_1: finished piece 1 at 12/30/2008 22:03:47
piece handle=/backups/admin/custpr/CUSTPR_bkp_al674863300_Set3083_Piece1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:07
channel ORA_DISK_1: deleting archive log(s)
archive log filename=/custpr/arch/arch_custpr_8008.log recid=7910 stamp=674638862
archive log filename=/custpr/arch/arch_custpr_8009.log recid=7911 stamp=674671207
archive log filename=/custpr/arch/arch_custpr_8010.log recid=7912 stamp=674697380
archive log filename=/custpr/arch/arch_custpr_8011.log recid=7913 stamp=674780433
archive log filename=/custpr/arch/arch_custpr_8012.log recid=7914 stamp=674784211
archive log filename=/custpr/arch/arch_custpr_8013.log recid=7915 stamp=674863288
archive log filename=/custpr/arch/arch_custpr_8014.log recid=7916 stamp=674863300
Finished backup at 12/30/2008 22:03:47
Starting backup at 12/30/2008 22:03:47
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/30/2008 22:03:47
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> ##BACKUP ARCHIVELOG ALL FORMAT '%d_bkp_al_%t_Set%s_Piece%p' delete input;
2>
3> # DELETE ARCHIVELOG UNTIL TIME 'SYSDATE-7';
4>
5> # check if database can be restored
6> # RESTORE DATABASE VALIDATE;
7>
8> # check if controlfile can be restored
9> ##RESTORE CONTROLFILE to '/backups/admin/custpr/custpr_bkp_cntlfile.ctl' VALIDATE;
10>
11> # check if archivelogs for the past two weeks can be restored
12> # RESTORE ARCHIVELOG FROM TIME 'SYSDATE-7' VALIDATE;
13>
14> # - Verify all backups on backup media are intact
15> # CROSSCHECK BACKUP OF DATABASE;
16>
17> # - Display a list of files that need to be backed up based on the retention
18> # policy. For this case study, files that don't have at least 1 backups
19> # will be reported.
20> REPORT NEED BACKUP;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 12/30/2008 22:03:48
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> # - delete un-necessary backups. This command deletes backups based on the
2> # retention policy.
3> ######### commented out DELETE OBSOLETE - TSM not configured to delete on 68
4> #########DELETE OBSOLETE;
5>
6> # - get complete list of existing backups
7> LIST BACKUP;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 12/30/2008 22:03:49
RMAN-06004: ORACLE error from recovery catalog database: ORA-00904: : invalid identifier
RMAN>
RMAN> #-end of file-
2> **end-of-file**
RMAN>
Recovery Manager complete.

ORACLE error from auxiliary database: ORA-01152: file 2 was not restored fr

Hello,
i'm trying to clone a database. It is in archive log mode.
I took a full back using below command
run {
backup
     tag 'DAILY_WHOLE'
     format 'FULL_backup_%s_%p_%c.bkp'     database
     plus archivelog
     tag 'DAILY_WHOLE'
     delete all input;
backup
     current controlfile
     format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE'
     spfile
     format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE';
}then i issue a duplicate database command
RUN
DUPLICATE DATABASE TO TEST_DB
          NOFILENAMECHECK
           NOREDO
          BACKUP LOCATION '/disk10/flash_recovery_area/PROD';
}at the very end I got this error.
contents of Memory Script:
   Alter clone database open resetlogs;
executing Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/15/2013 11:59:21
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2: 'sysaux.dbf'Can anyone help me? I would appreciate it. thanks

NOREDO would be used when you have a Consistent Backup (i.e. backup taken when the database is MOUNTed but not OPEN) and so, no archivelogs need to be applied. (This would also be the case for a NOARCHIVELOG database).
See the notes on NOREDO in the DUPLICATE command documentation in the Backup and Recovery Reference.
http://docs.oracle.com/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Hemant K Chitale

Oracle error ORA-39127 unexpected error from call to export_string

Hi
The export for an database encounters the following error .Can someone take a look at the cause please.
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_SERVER_ALERT_EXPORT.SYSTEM_INFO_EXP(1,dynconnect,'11.02.00.02.00',newblock)
ORA-13914: Threshold notification failed.
ORA-06512: at "SYS.DBMS_SERVER_ALERT", line 187
ORA-06512: at "SYS.DBMS_SERVER_ALERT_EXPORT", line 132
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7418
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/PRE_TABLE_ACTION
Regards

There are a lot of similar errors on MOS, perhaps you should search through them and see if any apply to you.
What version/patch level are you on? Have you made any grid control threshold modifications? Are you using procobol in an upgraded database?
You might want to go through support for this one.

Error while trying to call external web service from oracle PL/SQL 10.2 g

Hi I am trying to call an external web service from oracle PL/SQL .I am getting following run time error when I try to set the opeartion style.
But as per the oracle documentation this is one of the 2 valid values.
ORA-29532: Java call terminated by uncaught Java exception: operation style: "document" not supported.Teh webservice does expect the operation style as document.
Following is the code I am executing.
FUNCTION email
return varchar2
AS
service_ SYS.utl_dbws.SERVICE;
call_ SYS.utl_dbws.CALL;
service_qname SYS.utl_dbws.QNAME;
port_qname SYS.utl_dbws.QNAME;
operation_qname SYS.utl_dbws.QNAME;
string_type_qname SYS.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params SYS.utl_dbws.ANYDATA_LIST;
l_input_params SYS.utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://service.xmlservices.global.freedomgroup.com/';
-- search for 'service name' in the wsdl
service_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanService');
-- this is just the actual wsdl url
service_ := SYS.utl_dbws.create_service(HTTPURITYPE('http://hostname/GlobalWebServices/services/ClientCoreWebService?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanPort');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := SYS.utl_dbws.to_qname(l_namespace, 'postalCodelookup');
-- bind things together
call_ := SYS.utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
SYS.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
SYS.utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
SYS.utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
SYS.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'DOCUMENT');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := SYS.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
--vj this cud be either params or xml
SYS.utl_dbws.add_parameter(call_, 'param1', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.add_parameter(call_, 'param2', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('<TFGGlobalBasicXMLDO><systemCd>GLOBAL</systemCd><username>GlobalAdmin</username><password>GlobalAdmin</password><localID>1</localID></TFGGlobalBasicXMLDO>');
params(1) := ANYDATA.convertvarchar('<TFGGlobalPostalCodeLookupIDDO><postalCode>02446</postalCode><countryCode>USA</countryCode><stateCode>MA</stateCode><cityDisplay>BROOKLINE</cityDisplay><countyDisplay>NORFOLK</countyDisplay><include_inactive_flag>True</include_inactive_flag></TFGGlobalPostalCodeLookupIDDO>');
-- invoke the web service
retx := SYS.utl_dbws.invoke(call_, params);
dbms_output.put_line(retx.gettypename);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('done' || retx_string);
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
SYS.utl_dbws.release_service(service_);
return retx_string;
end email;

thsi is urgent anybody ????

Send E-mail from Oracle (9.2.0.1) : SMTP transient error: 421 Service not a

I have used Oracle 9i server (9.2.0.1 version) on Windows XP machine(with SP2).I want to send Email from PL/SQL procedure.
My Question is what sort of configuration needed to perform this activity?
I have installed IIS (Internet Information Service)
in my machine, then configure my SMTP mail server
with a valid email id and password given TCP port 465.
Later I came to know that to send Email from PL/SQL I have to install Oracle JServer Code. Follow three steps. the steps are
1. Execute the script as sys "$ORACLE_HOME\javavm\install\initjvm.sql"
2. Execute the loadjava classfile as
$ORACLE_HOME\plsql\jlib>loadjava -f -v -r -u sys/**** plsql.jar
3. Execute the script as sys "$ORACLE_HOME\rdbms\admin\initplsj.sql"
I sucessfully executed the first step, but for the second step iam not able to locate the plsql.jar file in the specified path.
So Please tell me if there is any other method to perform this task
My code is as follows.
CREATE OR REPLACE PROCEDURE SEND_MAIL (
                              msg_to varchar2,
                              msg_subject varchar2,
                              msg_text varchar2
                              IS
                              c utl_smtp.connection;
                              rc integer;
                              msg_from varchar2(50) := '[email protected]';
                              mailhost VARCHAR2(30) := 'mail.google.com';
                         BEGIN
                              c := utl_smtp.open_connection(mailhost, 465);
                              utl_smtp.helo(c, mailhost);
                              utl_smtp.mail(c, msg_from);
                              utl_smtp.rcpt(c, msg_to);
                              dbms_output.put_line(' Start Sending data');
                              utl_smtp.data(c,'From: Oracle Database' || utl_tcp.crlf ||
                              'To: ' || msg_to || utl_tcp.crlf ||
                              'Subject: ' || msg_subject ||
                              utl_tcp.crlf || msg_text);
                              dbms_output.put_line(' Finish Sending data');
                              utl_smtp.quit(c);
          EXCEPTION
               WHEN UTL_SMTP.INVALID_OPERATION THEN
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
               WHEN UTL_SMTP.TRANSIENT_ERROR THEN
dbms_output.put_line(' Temporary e-mail issue - try again');
WHEN UTL_SMTP.PERMANENT_ERROR THEN
dbms_output.put_line(' Permanent Error Encountered.');
END;
Procedure Created.
SQL> execute prc_send_mail('[email protected]','[email protected]','Good Morning.');
BEGIN prc_send_mail('[email protected]','[email protected]','Good Morning.'); END;
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 374
ORA-06512: at "SCOTT.PRC_SEND_MAIL", line 19
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at line 1.
Please tell me how to solve this problem.
Thank You.

1) Why did you install an SMTP server locally and then tell your code to try to use the server mail.google.com?
2) The error you're getting is from mail.google.com indicating that Google isn't running an open SMTP server there. I would be very surprised if Google were running a publicly available SMTP server anywhere since that would be an invitation for spammers.
Justin

Ora error from Oracle

Similar Messages

Maybe you are looking for