Oracle 10g moving to larger drive.

Hello. I just gave my development box back to our IT department to install a larger harddrive in addition to the one I have now.
My oracle installation was installed in /home and that is going to be moved to the 400gig drive, everything else will remain on the older drive.
When I get my machine back, is there any settings I need to change to get Oracle up and running again? For instance, if it hard codes somewhere the device, I'd imagine that would have to change.
thanks.

Actually I think I was mistaken changing ORACLE_HOME with changing owner of ORACLE_HOME.
Yes, you can move ORACLE_HOME but with some precaution.
Make sure your makefiles don't have references to a library, source with absolute path
Make sure that the new file system does not have a NO-SUID flag set
Make sure all user profiles and environment variables are pointed to new location.
Make sure to preserve file ownership and permissions.
If you can keep the old path that will be great.
Relink all
probably is a good idea after moving. At least it's a good sanity check.
The reason I suggest you move datafiles instead of ORACLE_HOME is because, your datafiles are more important and IO intensive than Oracle software files. You can take more advantage of a new and better file system. and in a lot of cases, datafiles size will over weight your Oracle Installation.

Similar Messages

Moving to larger drive using R&R.

I want to upgrade my hard disk to a larger capacity, but Lenovo did not ship an OS disk so how can I move my OS (Vista Business) to the new drive?
moderator note: title adjusted.
Message Edited by Agotthelf on 30-03-2009 09:39 AM

Hello,
First I would suggest to create porduct recovery discs:
You will need blank CD or DVD discs
depending on what your optical drive is capable of burning. If your
system does not have an internal burner, you will have to use an
external burner. You will need about 1CD + 3 DVD's for recovery sets in DVD
format and about 10 CD's for recovery sets in CD format. You can only
make one set of recovery discs and you can use them as many time as you
wish. These discs will restore your system to factory state.
1. Click Start, select All Programs, select ThinkVantage, then click Create Rescue and Recovery Media.
2. Select Create a set of Product Recovery discs now.
3. Verify the correct recordable drive is selected and click OK.
4. To verify the recovery discs were created successfully, repeat step
one. You should not be able to make another set of recovery discs.
Second method in R&R is to create a complete system recovery, you´ll find this option in the same way, as suggested above,
This will restore you system with all your data and application.
Third way is cloning the drive with Acronis True Image, from internal hdd to usb hdd, then insert your new disc and clone back from usb to internal. You´ll find many hints at the forums search: cloning hdd
For a clean Vista install refer to this guide
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Exception after switching to Oracle 10g

I have a working application running on weblogic server 9.1. The server has
a DataSource pointing to an Oracle 9i instance (i am using the Oracle Thin
XA driver).
Now I tried to connect to an identical database schema running in Oracle 10g
(with the same driver). Now weblogic throws errors while deploying the
application:
The problem seems to be with an cmp entity bean for the table G_ZM_FAB which
is a synonym to a view in another schema. I have no problem accessing
G_ZM_FAB with any database tool or with sqlplus. Only weblogic gives
errors. Another entity bean pointing to a similar table works perfectly
(the second entity bean has bean managed persistence).
Do you have any idea where the problem might be? I have tried other drivers
with no success (they give other errors). When I make G_ZM_FAB a normal
table with the same structure and content, everyting works fine.
Here is the server log with the exception that is thrown:
=== SNIP ===
JAVA Memory arguments: -Xmx1536m -Xgc:parallel -d64
WLS Start Mode=Production
CLASSPATH=:/opt/bea/patch_weblogic910/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/jrockit150/lib/tools.jar:/opt/bea/weblogic91/server/lib/weblogic_sp.jar:/opt/bea/weblogic91/server/lib/weblogic.jar:/opt/bea/weblogic91/server/lib/webservices.jar::/opt/bea/weblogic91/common/eval/pointbase/lib/pbclient51.jar:/opt/bea/weblogic91/server/lib/xqrl.jar::/opt/bea/weblogic91/integration/lib/util.jar:
PATH=/opt/bea/weblogic91/server/bin:/opt/bea/jrockit150/jre/bin:/opt/bea/jrockit150/bin:/opt/bea/user_projects/domains/Systemtest8010/bin:/opt/bea/user_projects/domains/Systemtest8010/runtime/bin:/opt/bea/user_projects/domains/Systemtest8010:/opt/ora10g/bin:/opt/bea/weblogic91/common/bin:/opt/bea/weblogic91/server/bin:/opt/sfw/bin:/usr/local/bin:/usr/bin::/usr/openwin/bin:/usr/local/kde/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_08-b03)
BEA JRockit(R) (build
R27.1.0-109-73164-1.5.0_08-20061129-1427-solaris-sparcv9, compiled mode)
Starting WLS with line:
/opt/bea/jrockit150/bin/java -jrockit -Xmx1536m -Xgc:parallel -d64 -Dpython.cachedir=/opt/bea/user_projects/domains/Systemtest8010/wlstTemp -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Dpegasus.serverTyp=test -Dpegasus.application.description="Systemtestumgebung
1" -da -Dplatform.home=/opt/bea/weblogic91 -Dwls.home=/opt/bea/weblogic91/server -Dwli.home=/opt/bea/weblogic91/integration -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/opt/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.management.username=weblogic -Dweblogic.management.password=xxxxxxxx -Dweblogic.Name=Pegasus -Djava.security.policy=/opt/bea/weblogic91/server/lib/weblogic.policy
weblogic.Server
<28.08.2007 8.33 Uhr CEST> <Info> <WebLogicServer> <BEA-000377> <Starting
WebLogic Server with BEA JRockit(R) Version
R27.1.0-109-73164-1.5.0_08-20061129-1427-solaris-sparcv9 from BEA Systems,
Inc.>
<28.08.2007 8.33 Uhr CEST> <Info> <Management> <BEA-141107> <Version:
WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<28.08.2007 8.33 Uhr CEST> <Info> <WebLogicServer> <BEA-000215> <Loaded
License : /opt/bea/license.bea>
<28.08.2007 8.33 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STARTING>
<28.08.2007 8.33 Uhr CEST> <Info> <WorkManager> <BEA-002900> <Initializing
self-tuning thread pool>
<28.08.2007 8.33 Uhr CEST> <Notice> <Log Management> <BEA-170019> <The
server log
file /pegasus_test/Systemtest8010/servers/Pegasus/logs/Pegasus.log is
opened. All server side log events will be written to this file.>
<28.08.2007 8.34 Uhr CEST> <Notice> <Security> <BEA-090082> <Security
initializing using security realm myrealm.>
<28.08.2007 8.34 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STANDBY>
<28.08.2007 8.34 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STARTING>
<28.08.2007 9.14 Uhr CEST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM
DUAL" set up for pool "pegasus" failed with
exception: "javax.transaction.xa.XAException".>
<28.08.2007 9.14 Uhr CEST> <Error> <JTA> <BEA-110412>
<Xid=BEA1-015D84121B5A4CC38D9
(35424095),Status=Committed,HeuristicErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=41,seconds left=82,activeThread=Thread[[ACTIVE]
ExecuteThread: '0' for queue: 'weblogic.kernel.Default
(self-tuning)',5,Pooled
Threads],XAServerResourceInfo[pegasus]=(ServerResourceInfo[pegasus]=(state=committed,assigned=Pegasus),xar=pegasus,re-Registered
=
false),SCInfo[Systemtest8010+Pegasus]=(state=committed),properties=({}),local
properties=({weblogic.jdbc.jta.pegasus=[ No XAConnection is attached to
this
TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=Pegasus+10.32.193.47:8010+Systemtest8010+t3+,
XAResources={WLStore_Systemtest8010_FileStore-0,
pegasus2},NonXAResources={})],CoordinatorURL=Pegasus+10.32.193.47:8010+Systemtest8010+t3+)
completed heuristically: (pegasus, HeuristicHazard, ()) >
<28.08.2007 9.14 Uhr CEST> <Error> <Deployer> <BEA-149231> <Unable to set
the activation state to true for the application 'Pegasus-Application'.
weblogic.application.ModuleException: Exception activating module:
EJBModule(deploy/DEBTMR-G-EJB.jar)
Unable to deploy EJB: G_ZM_FAB from deploy/DEBTMR-G-EJB.jar:
[EJB:011007]Unable to create EJB Persistence Manager.
javax.transaction.HeuristicMixedException: (pegasus, HeuristicHazard, ())
at
weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:297)
at
weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
at
weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:271)
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:298)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
at
weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1292)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:405)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at
weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at
weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at
weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
at
weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
at
weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at
weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
at
weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
at
weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at
weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at
weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:422)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
Truncated. see log file for complete stacktrace
[EJB:011007]Unable to create EJB Persistence Manager.
javax.transaction.HeuristicMixedException: (pegasus, HeuristicHazard, ())
at
weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:297)
at
weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
at
weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:271)
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:298)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
at
weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1292)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:405)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at
weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at
weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at
weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
at
weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
at
weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at
weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
at
weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
at
weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at
weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at
weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
NestedException Message is :(pegasus, HeuristicHazard, ())
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:311)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
Truncated. see log file for complete stacktrace
=== SNIP ===
Greetings,
Christian

Christian Schmolzi wrote:
I have a working application running on weblogic server 9.1. The server has
a DataSource pointing to an Oracle 9i instance (i am using the Oracle Thin
XA driver).
Now I tried to connect to an identical database schema running in Oracle 10g
(with the same driver). Now weblogic throws errors while deploying the
application:
The problem seems to be with an cmp entity bean for the table G_ZM_FAB which
is a synonym to a view in another schema. I have no problem accessing
G_ZM_FAB with any database tool or with sqlplus. Only weblogic gives
errors. Another entity bean pointing to a similar table works perfectly
(the second entity bean has bean managed persistence).
Do you have any idea where the problem might be? I have tried other drivers
with no success (they give other errors). When I make G_ZM_FAB a normal
table with the same structure and content, everyting works fine.Odd. Well, we can assume that the issue is a difference in the
JDBC-access behavior of the two DBMS versions. I would start by
updating the ojdbc14.jar in your WLS's server\lib directory. Download
and try Oracle's latest driver, and let me know if that solves it.
Joe
>
Here is the server log with the exception that is thrown:
=== SNIP ===
JAVA Memory arguments: -Xmx1536m -Xgc:parallel -d64
WLS Start Mode=Production
CLASSPATH=:/opt/bea/patch_weblogic910/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/jrockit150/lib/tools.jar:/opt/bea/weblogic91/server/lib/weblogic_sp.jar:/opt/bea/weblogic91/server/lib/weblogic.jar:/opt/bea/weblogic91/server/lib/webservices.jar::/opt/bea/weblogic91/common/eval/pointbase/lib/pbclient51.jar:/opt/bea/weblogic91/server/lib/xqrl.jar::/opt/bea/weblogic91/integration/lib/util.jar:
PATH=/opt/bea/weblogic91/server/bin:/opt/bea/jrockit150/jre/bin:/opt/bea/jrockit150/bin:/opt/bea/user_projects/domains/Systemtest8010/bin:/opt/bea/user_projects/domains/Systemtest8010/runtime/bin:/opt/bea/user_projects/domains/Systemtest8010:/opt/ora10g/bin:/opt/bea/weblogic91/common/bin:/opt/bea/weblogic91/server/bin:/opt/sfw/bin:/usr/local/bin:/usr/bin::/usr/openwin/bin:/usr/local/kde/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_08-b03)
BEA JRockit(R) (build
R27.1.0-109-73164-1.5.0_08-20061129-1427-solaris-sparcv9, compiled mode)
Starting WLS with line:
/opt/bea/jrockit150/bin/java -jrockit -Xmx1536m -Xgc:parallel -d64 -Dpython.cachedir=/opt/bea/user_projects/domains/Systemtest8010/wlstTemp -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Dpegasus.serverTyp=test -Dpegasus.application.description="Systemtestumgebung
1" -da -Dplatform.home=/opt/bea/weblogic91 -Dwls.home=/opt/bea/weblogic91/server -Dwli.home=/opt/bea/weblogic91/integration -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/opt/bea/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.management.username=weblogic -Dweblogic.management.password=xxxxxxxx -Dweblogic.Name=Pegasus -Djava.security.policy=/opt/bea/weblogic91/server/lib/weblogic.policy
weblogic.Server
<28.08.2007 8.33 Uhr CEST> <Info> <WebLogicServer> <BEA-000377> <Starting
WebLogic Server with BEA JRockit(R) Version
R27.1.0-109-73164-1.5.0_08-20061129-1427-solaris-sparcv9 from BEA Systems,
Inc.>
<28.08.2007 8.33 Uhr CEST> <Info> <Management> <BEA-141107> <Version:
WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<28.08.2007 8.33 Uhr CEST> <Info> <WebLogicServer> <BEA-000215> <Loaded
License : /opt/bea/license.bea>
<28.08.2007 8.33 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STARTING>
<28.08.2007 8.33 Uhr CEST> <Info> <WorkManager> <BEA-002900> <Initializing
self-tuning thread pool>
<28.08.2007 8.33 Uhr CEST> <Notice> <Log Management> <BEA-170019> <The
server log
file /pegasus_test/Systemtest8010/servers/Pegasus/logs/Pegasus.log is
opened. All server side log events will be written to this file.>
<28.08.2007 8.34 Uhr CEST> <Notice> <Security> <BEA-090082> <Security
initializing using security realm myrealm.>
<28.08.2007 8.34 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STANDBY>
<28.08.2007 8.34 Uhr CEST> <Notice> <WebLogicServer> <BEA-000365> <Server
state changed to STARTING>
<28.08.2007 9.14 Uhr CEST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM
DUAL" set up for pool "pegasus" failed with
exception: "javax.transaction.xa.XAException".>
<28.08.2007 9.14 Uhr CEST> <Error> <JTA> <BEA-110412>
<Xid=BEA1-015D84121B5A4CC38D9
(35424095),Status=Committed,HeuristicErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=41,seconds left=82,activeThread=Thread[[ACTIVE]
ExecuteThread: '0' for queue: 'weblogic.kernel.Default
(self-tuning)',5,Pooled
Threads],XAServerResourceInfo[pegasus]=(ServerResourceInfo[pegasus]=(state=committed,assigned=Pegasus),xar=pegasus,re-Registered
=
false),SCInfo[Systemtest8010+Pegasus]=(state=committed),properties=({}),local
properties=({weblogic.jdbc.jta.pegasus=[ No XAConnection is attached to
this
TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=Pegasus+10.32.193.47:8010+Systemtest8010+t3+,
XAResources={WLStore_Systemtest8010_FileStore-0,
pegasus2},NonXAResources={})],CoordinatorURL=Pegasus+10.32.193.47:8010+Systemtest8010+t3+)
completed heuristically: (pegasus, HeuristicHazard, ()) >
<28.08.2007 9.14 Uhr CEST> <Error> <Deployer> <BEA-149231> <Unable to set
the activation state to true for the application 'Pegasus-Application'.
weblogic.application.ModuleException: Exception activating module:
EJBModule(deploy/DEBTMR-G-EJB.jar)
Unable to deploy EJB: G_ZM_FAB from deploy/DEBTMR-G-EJB.jar:
[EJB:011007]Unable to create EJB Persistence Manager.
javax.transaction.HeuristicMixedException: (pegasus, HeuristicHazard, ())
at
weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:297)
at
weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
at
weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:271)
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:298)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
at
weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1292)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:405)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at
weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at
weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at
weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
at
weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
at
weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at
weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
at
weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
at
weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at
weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at
weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:422)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
Truncated. see log file for complete stacktrace
[EJB:011007]Unable to create EJB Persistence Manager.
javax.transaction.HeuristicMixedException: (pegasus, HeuristicHazard, ())
at
weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:297)
at
weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:226)
at
weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:271)
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:298)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
at
weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1292)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:405)
at
weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at
weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at
weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at
weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at
weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at
weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at
weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at
weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:176)
at
weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:347)
at
weblogic.management.deploy.internal.DeploymentAdapter$1.activate(DeploymentAdapter.java:50)
at
weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at
weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:232)
at
weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:168)
at
weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at
weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at
weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at
weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
NestedException Message is :(pegasus, HeuristicHazard, ())
at
weblogic.ejb.container.manager.BaseEntityManager.setupPM(BaseEntityManager.java:311)
at
weblogic.ejb.container.manager.BaseEntityManager.setup(BaseEntityManager.java:244)
at weblogic.ejb.container.manager.DBManager.setup(DBManager.java:170)
at
weblogic.ejb.container.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrivenBeanInfoImpl.java:1379)
at
weblogic.ejb.container.deployer.EntityBeanInfoImpl.activate(EntityBeanInfoImpl.java:232)
Truncated. see log file for complete stacktrace
=== SNIP ===
Greetings,
Christian

Reconfig of Oracle 10g, Programs in Start Menu.

Hi
1. My window on C: drive was corrupted, and my Oracle 10g was o D: drive.
2. I installed new window, reconfig my Oracle 10g Database.
3 But i have lost all utilites/program listing of 10g, appeared in Start Menu.
Plz, tell me the way how we can reconfig this thing in our window.
Thanks.
Regards
<The above Question was posted on Database Installation Forum two-3days ago, I thing no can answer this>

If you reinstalled the oracle product this is enough to have your menu 'rebuilt'. It actually doesn't rebuilds the menu, it rather creates new entries.
I suggest you to take a look at the installation forum where you posted this same thread. At the installation forum I initially understood you didn't reinstall the Oracle Home, but you 'reconfigured your database'.
~ Madrid
http://hrivera99.blogspot.com

Re- Install Oracle 10g

Greetings ,
We recently had a hard disk failure on a test enviroment.The drive has been replaced.We would like to re-install oracle 10g on the new drive.
Is the any method after the installion of replicating/copying the tablspaces as well as users from the live enviroment which is currenlty locted on a Linux platform?

Yes, you can clone the live environment using RMAN

Retrieve data from a large table from ORACLE 10g

I am working with a Microsoft Visual Studio Project that requires to retrieve data from a large table from Oracle 10g database and export the data into the hard drive.
The problem here is that I am not able to connect to the database directly because of license issue but I can use a third party API to retrieve data from the database. This API has sufficient previllege/license permission on to the database to perform retrieval of data. So, I am not able to use DTS/SSIS or other tool to import data from the database directly connecting to it.
Here my approach is...first retrieve the data using the API into a .net DataTable and then dump the records from it into the hard drive in a specific format (might be in Excel file/ another SQL server database).
When I try to retrieve the data from a large table having over 13 lacs records (3-4 GB) in a data table using the visual studio project, I get an Out of memory exception.
But is there any better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?
Any help on this problem will be highly appriciated.
Thanks in advance...
-Jahedur Rahman
Edited by: Jahedur on May 16, 2010 11:42 PM

Girish...Thanks for your reply...But I am sorry for the confusions. Let me explain that...
1."export the data into another media into the hard drive."
What does it mean by this line i.e. another media into hard drive???
ANS: Sorry...I just want to write the data in a file or in a table in SQL server database.
2."I am not able to connect to the database directly because of license issue"
huh?? I never heard this question that a user is not able to connect the db because of license. What error / message you are getting?
ANS: My company uses a 3rd party application that uses ORACLE 10g. And my compnay is licensed to use the 3rd party application (APP+Database is a package) and did not purchased ORACLE license to use directly. So I will not connect to the database directly.
3.I am not sure which API is you are talking about, but i am running an application of the visual studio data grid or similar kind of controls; in which i can select (select query) as many rows as i needed; no issue.
ANS: This API is provided by the 3rd party application vendor. I can pass a query to it and it returns a datatable.
4."better way to retrieve the records chunk by chunk and do the export without loosing the state of the data in the table?"
ANS: As I get a system error (out of memory) when I select all rows in a datatable at a time, I wanted to retrieve the data in multiple phases.
E.g: 1 to 20,000 records in 1st phase
20,001 to 40,000 records in 2nd phase
40,001 to ...... records in 3nd phase
and so on...
Please let me know if this does not clarify your confusions... :)
Thanks...
-Jahedur Rahman
Edited by: user13114507 on May 12, 2010 11:28 PM

Couldn't copy large amount of data from enterprise DB to Oracle 10g

Hi,
I am using i-batis to copy data from enterprise DB to oracle and viceversa.
The datatype of a field on EDB is 'text' and the datatype on oracle is 'SYS.XMLTYPE'
i am binding these to a java string property in a POJO to bind values.
I could successfully copy limited amount of data from EDB to oracle but if there is more data, i am getting the following exceptions with different oracle drivers ( but i could read large amount of data from EDB):
--- Cause: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeUpdate(MappedStatement.java:107)
at com.ibatis.sqlmap.engine.impl.SqlMapExecutorDelegate.update(SqlMapExecutorDelegate.java:457)
at com.ibatis.sqlmap.engine.impl.SqlMapSessionImpl.update(SqlMapSessionImpl.java:90)
at com.ibatis.sqlmap.engine.impl.SqlMapClientImpl.update(SqlMapClientImpl.java:66)
at com.aqa.pojos.OstBtlData.updateOracleFromEdbBtlWebservice(OstBtlData.java:282)
at com.aqa.pojos.OstBtlData.searchEdbAndUpdateOracleBtlWebservice(OstBtlData.java:258)
com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in com/aqa/sqlmaps/SQLMaps_OSTBTL_Oracle.xml.
--- The error occurred while applying a parameter map.
--- Check the updateOracleFromEDB-InlineParameterMap.
--- Check the parameter mapping for the 'btlxml' property.
--- Cause: java.sql.SQLException: setString can only process strings of less than 32766 chararacters
at com.ibatis.sqlmap.engine.mapping.statement.MappedStatement.executeUpdate(MappedStatement.java:107)
at com.iba
I have latest oracle 10g jdbc drivers.
remember, i could copy any amount of data from oracle to EDB but not otherway around.
PLease let me know if you have come across this issue, any recommendation is very much appreciated.
Thanks,
CK.

Hi,
I finally remembered how I solved this issue previously.
The jdbc driver isn't able to directly call the insert with a column xml_type. The solution I was using was to build a wrapper function in plSQL.
Here it is (for insert but I suppose tha update will be the same)
create or replace procedure insertXML(file_no_in in number, program_no_in in varchar2, ost_XML_in in clob, btl_XML_in in clob) is
begin
insert into AQAOST_FILES (file_no,program_no,ost_xml,btl_xml) values(file_no_in, program_no_in, xmltype(ost_XML_in), xmltype(btl_XML_in));
end insertXML;
here is the sqlmap file I used
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE sqlMap
PUBLIC "-//ibatis.apache.org//DTD SQL Map 2.0//EN"
"http://ibatis.apache.org/dtd/sql-map-2.dtd">
<sqlMap>
     <typeAlias alias="AqAost" type="com.sg2net.jdbc.AqAost" />
     <insert id="insert" parameterClass="AqAost">
          begin
               insertxml(#fileNo#,#programNo#,#ostXML:CLOB#,#bltXML:CLOB#);
          end;
     </insert>
</sqlMap>
an here is a simple program
package com.sg2net.jdbc;
import java.io.IOException;
import java.io.Reader;
import java.io.StringWriter;
import java.sql.Connection;
import oracle.jdbc.pool.OracleDataSource;
import com.ibatis.common.resources.Resources;
import com.ibatis.sqlmap.client.SqlMapClient;
import com.ibatis.sqlmap.client.SqlMapClientBuilder;
public class TestInsertXMLType {
     * @param args
     public static void main(String[] args) throws Exception {
          // TODO Auto-generated method stub
          String resource="sql-map-config-xmlt.xml";
          Reader reader= Resources.getResourceAsReader(resource);
          SqlMapClient sqlMap = SqlMapClientBuilder.buildSqlMapClient(reader);
          OracleDataSource dataSource= new OracleDataSource();
          dataSource.setUser("test");
          dataSource.setPassword("test");
          dataSource.setURL("jdbc:oracle:thin:@localhost:1521:orcl");
          Connection connection=dataSource.getConnection();
          sqlMap.setUserConnection(connection);
          AqAost aqAost= new AqAost();
          aqAost.setFileNo(3);
          aqAost.setProgramNo("prg");
          Reader ostXMLReader= Resources.getResourceAsReader("ostXML.xml");
          Reader bltXMLReader= Resources.getResourceAsReader("bstXML.xml");
          aqAost.setOstXML(readerToString(ostXMLReader));
          aqAost.setBltXML(readerToString(bltXMLReader));
          sqlMap.insert("insert", aqAost);
          connection.commit();
     public static String readerToString(Reader reader) {
          StringWriter writer = new StringWriter();
          char[] buffer = new char[2048];
          int charsRead = 0;
          try {
               while ((charsRead = reader.read(buffer)) > 0) {
                    writer.write(buffer, 0, charsRead);
          } catch (IOException ioe) {
               throw new RuntimeException("error while converting reader to String", ioe);
          return writer.toString();
package com.sg2net.jdbc;
public class AqAost {
     private long fileNo;
     private String programNo;
     private String ostXML;
     private String bltXML;
     public long getFileNo() {
          return fileNo;
     public void setFileNo(long fileNo) {
          this.fileNo = fileNo;
     public String getProgramNo() {
          return programNo;
     public void setProgramNo(String programNo) {
          this.programNo = programNo;
     public String getOstXML() {
          return ostXML;
     public void setOstXML(String ostXML) {
          this.ostXML = ostXML;
     public String getBltXML() {
          return bltXML;
     public void setBltXML(String bltXML) {
          this.bltXML = bltXML;
I tested the insert and it works correctly
ciao,
Giovanni

Data moving between Oracle 10g with CLOB fields

Hi all,
I have a trouble in migrate data between Oracle 10g with different platform. The worst thing is that I don't have a DBA account for the DB importing data. I think I can't use IMP or IMPDP in this way. So I seek help from sql developer, but it seems having another problem with CLOB data moving.
Re: EA2 : SQL Developer 1.5 : export data CLOB columns
in the thread, I found someone wrote this:
- SQL Developer v1.5 EA2 - exports first 4000 chars (which is anyway too small for me, because my CLOBs are larger - if they were smaller, I would have made them VARCHAR2s instead!).
I would like to ask:
1, What SQL Developer v1.5 EA2 is? Is it the Data Modeling one?
2, How to export table data with CLOB with SQL Developer v1.5 EA2? Since 4000 chars is enough for me to use.
OR any other method to export CLOB but not IMP / IMPDP ?
Now I am using the spool of sqlplus to export CLOB.
Many thanks,

1. The EAs are Early Adapters, betas, so you should expect the same behaviour from the latest 1.5.4 production release.
2. Exports can be done with the Database Export tool, through the table's context menu in the navigator tree or the result grid's context menu.
Have fun,
K.

Moved dehydration Store to Oracle 10g DB

Hi... I'd like to make sure that this error in starting up the BPEL PM ( version 2.2 ) is OK after moving the dehydration store to an Oracle 10g database. I loaded the LoanFlow Demo and it seems to run fine.
Thanks, Matt
###Details###
ORABPEL Schema objects in 10g Database
TABLE_NAME TABLE_TYPE
ADMIN_LIST_CI VIEW
ADMIN_LIST_CX VIEW
ADMIN_LIST_WI VIEW
AUDIT_DETAILS TABLE
AUDIT_TRAIL TABLE
CI_ID_RANGE TABLE
CI_INDEXES TABLE
CUBE_INSTANCE TABLE
CUBE_SCOPE TABLE
DBG_WI VIEW
DLV_MESSAGE TABLE
DLV_MESSAGE_BIN TABLE
DLV_SUBSCRIPTION TABLE
DOCUMENT TABLE
DOMAIN TABLE
INVOKE_MESSAGE TABLE
INVOKE_MESSAGE_BIN TABLE
LOAN_CUSTOMER TABLE
NAMESPACE TABLE
PROCESS_REVISION TABLE
SCOPE_ACTIVATION TABLE
SYNC_STORE TABLE
SYNC_TRAIL TABLE
TASK TABLE
TX_INFERIOR TABLE
TX_MESSAGE TABLE
TX_SUPERIOR TABLE
VERSION TABLE
VERSION_SERVER TABLE
WI_EXCEPTION TABLE
WORK_ITEM TABLE
WORK_LIST VIEW
Database Connections after BPEL PM is started....
USERNAME
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
ORABPEL
20 rows selected.
Portion of BPEL PM startup output....
05/02/17 16:02:23 Building Application TagLibrary Persistent Cache for owf
05/02/17 16:02:23 Done getting application current resources
05/02/17 16:02:23 Done initializing cache
05/02/17 16:02:23 Refreshing application cache - from existing cache ...
05/02/17 16:02:24 Found 0 listeners
05/02/17 16:02:24 java.sql.SQLException: ORA-00942: table or view does not exist
05/02/17 16:02:24 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
05/02/17 16:02:24 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
05/02/17 16:02:24 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
05/02/17 16:02:24 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
05/02/17 16:02:24 at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:181)
05/02/17 16:02:24 at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:661)
05/02/17 16:02:24 at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:951)
05/02/17 16:02:24 at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:693)
05/02/17 16:02:24 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1057)
05/02/17 16:02:24 at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
05/02/17 16:02:24 at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2942)
05/02/17 16:02:24 at oracle.tip.pc.services.owf.BridgeDBWrapper.getOWFProcesses(BridgeDBWrapper.java:159)
05/02/17 16:02:24 at oracle.tip.pc.services.owf.callback.OWFMonitorServlet.init(OWFMonitorServlet.java:46)
05/02/17 16:02:24 at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2141)
05/02/17 16:02:24 at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4582)
05/02/17 16:02:24 at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4676)
05/02/17 16:02:24 at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:820)
05/02/17 16:02:24 at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:542)
05/02/17 16:02:24 at com.evermind.server.Application.getHttpApplication(Application.java:889)
05/02/17 16:02:24 at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:690)
05/02/17 16:02:24 at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:586)
05/02/17 16:02:24 at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:263)
05/02/17 16:02:24 at com.evermind.server.http.HttpServer.setSites(HttpServer.java:261)
05/02/17 16:02:24 at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:162)
05/02/17 16:02:24 at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2385)
05/02/17 16:02:24 at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1542)
05/02/17 16:02:24 at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:92)
05/02/17 16:02:24 at java.lang.Thread.run(Thread.java:534)
05/02/17 16:02:24 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)
initialized
<ServerManager::loadProcesses> Loading processes for all domains
<2005-02-17 16:02:25,512> <INFO> <default.collaxa.cube.engine> <CubeEngine::load
AllProcesses>
Loading processes for BPEL domain "default" ...
...

Matt, it seems like you are running the JDev Based Beta with the new workflow extensions. You should get the Technotes from the person that you supplied you the beta version.
Anyway, to install the additional tables, please run
pcttask.sql, pcowf.sql, catpcreports.sql using sql*plus into the right schema. You will find these files in <home>\integration\bpm\runtime\admin\sql
Sandor

How to install Oracle 10g ODBC driver for win 64 bit?

I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
where to find the driver....
The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

Oracle 10g Express Edition Beta 3 ODBC Driver Always Crashes

I find that if you set up an ODBC Data Source for Oracle 10g Express Edition on Windows XP SP2 using the "Oracle in XE" driver, anything that tries to access it will crash, even the Windows ODBC Data Source Administratior if you click the "Test Connection" button.
Having clicked the button, you get a window coming up entitled "Oracle ODBC Driver" with a yellow exclamation mark in it, with no other text in the window except for an OK button.
If you press OK, then it crashes and goes through the "Please tell Microsoft about this problem" process....

Hi,
Thanks for your comment, but I can't get onto the XE forum.
I found http://www.oracle.com/technology/products/database/xe/forum.html which says:
Forum registration is possible only by downloading and installing Oracle Database XE. After installation, click on the "Registration" link from the Database homepage.
However I find that the "Database Homepage" does not exist.
Choosing the Oracle XE "Go To Database Home Page" takes my browser to http://127.0.0.1:8080/apex which is not available even though my oracle server is running and sqlplus can talk to it.
There's definitely nothing serving on tcp port 8080, as follows:
[dcampbel@clevo]~> telnet localhost 8080
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
Regards,
-- Dave

Moving adobe acrobat x pro to larger drive D (off ssd2 drive C) - what are the steps needed

I have Win7, only 4 GB left on my SSD drive C and a large regular drive D. My programs are on drive C (which includes Master CS6 and Adobe acrobat X Pro) and documents/pictures are on drive D and I still need to clear out room on drive C. Before I buy a larger drive C SSD, can I :
Move Adobe Acrobat X Pro program to drive D by uninstalling on drive C and reinstalling it on Drive D?
Do I need to move the program CS6 Master collection to the same drive that adobe Acrobat X Pro exists?
Does Adobe Acrobat X Pro need me to move any other programs from C to D in order to work - if uninstall on drive C and reinstall on drive D doesn't take care of all supporting files?
if I am able to move Acrobat X Pro to drive D, will my documents know the path or is there a way to make sure that everything reroutes to drive D?
Will Acrobat X Pro updates find the program if it is on drive D, or is there something to direct updates to the new location, if I am able to move X Pro to drive D?
I need step by step examples, even though I know web design and xhtml/css/php/js coding, hardware and this kind of cleaning up intimidates me.
Any help is appreciated, thanks!

You can sometimes move software by uninstalling and reinstalling. However ON NO ACCOUNT uninstall Acrobat that is part of Creative Suite, because it is a devil of a job to reinstall. Use only Creative Suite installer; not sure if it can install to another disk.
If the software is installed to another location it should just work with nothing to fix.
But the savings may be much smaller than you think. Only a little of the disk space used is in the selected disk. Some is in Common Files, which doesn't move, and much more is in the Windows Installer Database, which doesn't move.
I would look for other savings than moving software.

Oracle 10g ODBC driver with Windows 7 32 bit connecting to Excel

Hi Everyone,
I'm having an issue connecting to our oracle 10g database (64 bit system) from a 32 bit windows 7 installation running excel 2010/2007 using odbc drivers. Our excel spreadsheets worked without issue in windows xp.
In windows 7 I have been able to install the odbc driver via the following method:
1. Download the oracle 'basic' client and oracle 'odbc' client from www.oracle.com and extract the contents:
instantclient-basic-win32-10.2.0.3-20061115
instantclient-odbc-win32-10.2.0.3-20061115
2. Create a folder 'oracle' and place the instantclient_10_2 folder inside.
3. Ensure all the basic and odbc files reside in this folder.
4. Create a 'network' folder within instantclient_10_2
5. Create an 'admin' folder within 'network'
6. Create sqlnet.ora and tnsnames.ora files within the 'admin' folder:
7. Run 'obdc_install' within the instantclient_10_2 folder
8. Download and run the oracle odbc driver exe file from www.oracle.com (ORA10203.exe)
9. Go to Control Panel -> Administrative Tools -> Data Sources and create a new System DN
This allows excel spreadsheets connecting ONLY to oracle to function.
Unfortunately some of our spreadsheets connect to both a MySQL database as well as oracle. Spreadsheets connecting only to MySQL also function correctly, however, as soon as the vb associated with a spreadsheet includes a mysql call followed by an oracle call the spreadsheets fail. In Excel 2007 excel crashes completely everytime. In Excel 2010 the mysql data is generated, then when the script hits to oracle odbc connection there is a long pause, the oracle ODBC driver connect pops up requesting a username/password (this didn't happen in xp), then the data source selection pops up, then the username/password connect screen pops up again, and finally it fails with a runtime error '1004' General ODBC error.
If you look at the VB script it's failing at the Refresh BackgroundQuery statement in the ODBC connection block:
With Worksheets("Oracle1").QueryTables.Add(Connection:= _
"ODBC;DSN=Oracle_ODBC;UID=user;PWD=password;SERVER=ORACLE_LINUX;", _
Destination:=Worksheets("Oracle1").Range("A1"))
.CommandText = strSql
.Name = "Oracle1_data"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlOverwriteCells
.SavePassword = True
.SaveData = True
.AdjustColumnWidth = True
.RefreshPeriod = 0
.PreserveColumnInfo = True
.Refresh BackgroundQuery:=False
End With
Does anyone know how to get around this? It's very important!!
Also if you try to edit the oracle ODBC connections in Control Panels -> Administrative Tools -> Data Sources, ODBC crashes 95% of the time.
Advice greatly appreciated!!

Well, here's what I'd check anyway..
1) get Process Explorer from http://sysinternals.com
2) make a mysql connection, get a list of dll's loaded (include the location and version columns in the lower pane output)
3) close that, then make an ora odbc connection, get a list of dlls.
4) close that, then make a mysql connection followed by an ora odbc connection, get a list of dlls
5) compare the lists of loaded dlls. In particular, the difference between #3 and #4, is there a dll dependency that gets loaded by oracle's odbc that comes from a different location when you've opened a mysql connection first?
May or may not help, but might turn up a difference to help point you in a direction.
Greg

Problem with type 4 driver using oracle 10g

HI,
I am unable to establish a type 4 connection with oracle 10g.
Specs:
Driver used: OracleDriver that comes with the ojdbc14.jar along with oracle 10g
JDK used: Tried using both j2sdk1.4.2 and using JDK 5.0
JRE: Again, JRE that was shipped with j2sdk 1.4.2 and JRE 5.0
OS: Windows XP sp2
I am able to compile the following piece of code, so there is no classpath problem, etc.
When I try to run the program, the exception thrown is "No Suitable Driver"
There is no problem with the TNSListener, etc...even if all Oracle related services in 'services.msc' are Started/Stopped, the error remains.
I am, however, able to establish the connection using type1 driver.
Please Help!
import java.sql.*;
import java.io.*;
class TestConn
     Connection connection;
     Statement statement;
     ResultSet resultset;
     public void testConn() throws SQLException, ClassNotFoundException
          DriverManager.registerDriver(new oracle.jdbc.driver.OracleStatement());
          //DriverManager.registerDriver(new sun.jdbc.odbc.JdbcOdbcDriver());
          connection = DriverManager.getConnection("oracle:jdbc:thin:@127.0.0.1:1521", "scott", "tiger");
          //connection = DriverManager.getConnection("jdbc:odbc:dsn1", "scott", "tiger");
          System.out.println("Connection Established");
          statement = connection.createStatement();
          resultset = statement.executeQuery("select ename from emp");
          while(resultset.next())
               System.out.println(resultset.getString(1));
class Test
     public static void main(String args[]) throws SQLException, ClassNotFoundException
          TestConn obj = new TestConn();
          obj.testConn();
};

The JDBC URL should include the database SID. For example, if the database SID is Orcl
connection = DriverManager.getConnection("oracle:jdbc:thin:@127.0.0.1:1521:Orcl", "scott", "tiger");

Where can I download the ODBC driver for Oracle 10g XE?

where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

already checked these http://www.connectionstrings.com/oracle, I need Help Please.

Oracle 10g moving to larger drive.

Similar Messages

Maybe you are looking for