Oracle 10G on XP : Network Adapter Connection Issue

Hi,
I am trying to install an enterprise software which uses Oracle 10g database.
I have installed the database, but installation of the enterprise software fails with the following error message.
THROWABLE EVENT {Description=[Failed to create connection],
Throwable=[java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:319)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:344)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:148)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:545)
The listener name is "LISTENER" and Listner service name is OracleServiceBMCPDS.
The listener is running.
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
Start Date                10-JUL-2009 16:54:48
Uptime                    0 days 0 hr. 38 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\abc...\network\admin\listener.ora
Listener Log File         C:\abc...\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=1521)))
Services Summary...
Service "BMCPDS" has 1 instance(s).
Instance "BMCPDS", status UNKNOWN, has 1 handler(s) for this service...
Service "BMCPDS.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
Service "BMCPDS_XPT.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
The command completed successfully
I am not a DBA hence finding it hard to resolve the issue. Your help is highly appreciated.
Edited by: user3533384 on Jul 10, 2009 6:12 AM

Are you talking about the Enterprise Manager Console provided by the oracle or some other enterprise software? If it is enterprise software then you need to the do the proper setting for network connection to database. Probably you will have to configure tnsname.ora and sqlnet.ora. Can you connect through SQL*Plus utility? Go to Run-->SQLPLUSW type in the username password and tnsnames entry for the database. See if you can connect. If not post us the error message.
Regards.

Similar Messages

4S Verizon Network / Internet Connectivity Issues?

I have been having problems with what appears to be Verizon Network/Internet Connectivity issues. I am located in northern Colorado, using an iPhone 4S with a Mophie Air battery backup/case.
I am in a solid 4G area (even though the phone is 3G) and I have not had any problems with any connection issues, until last night. I still see three bars of 3G service on the phone indicator area...so it is decieving.
I can still recieve emails, text messages, and phone calls, but nothing that uses the internet will work. All apps seem to try to open and try to update, but the whizzy-wheel indicator just sits and spins until I get a "Network Error" message or a time out error of some kind. Most error pop-ups are saying to check the internet settings and try again. Ugh!
Also, since it seems to be trying to recognize the network all the time (even when all tasks are killed and nothing should be running), my battery is going down MUCH faster today! I took it off of the charger at 7am and it was down to 20% battery in only 4 hours! Then I turned on the battery backup, and it is quickly using that up too! At this rate my phone will be completely DEAD by the time I leave work today, and I haven't even used it for anything all day (except to try to connect to the web a few times - testing)!
I have tried the following so far to try to regain internet through the Verizon network, to no avail:
checked for software updates...phone was up to date with iOS 6.0.1
checked my firmware version (it is 3.0.04)
killed all background/running apps (with the home button double-click/hold icon/end)
"reset" my phone via a couple of methods (both the regular power off option and the force-power off option).
*228, option 2 (to reset Roaming)
cleared all data cache areas/cookies/etc.
Cellular data is set to "On"; Roaming is set to "On" for all options;
I have a 64GB device (57.3 usable capacity) of which I still show 46.2 available.
WiFi is set to "Off" (although I can use WiFi at home with no problem if I need to, but I shouldn't have to!)
Airplane Mode is set to "Off"; Restrictions are set to "Off"; Bluetooth is set to "Off"
Basically, there is NO REASON my phone should be having connection issues!
PLEASE HELP?!!

I tried everything you did and more, i thought i had it working, but i got a voicemail today and when i went to open it earlier it just has the wheel loading forever and then says it cant onnect to voicemail. the searching does make it wear down the battery faster as well. i can get calls, texts etc, but i cant help but think there are a few bugs with the ios 6.01 software

Oracle 10g Installtion error Network Configuration requirements ... failed

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.

Are you installing Oracle 10G R2? If this is the case then for DHCP network environments, you need to create a Microsoft loop back adapter.
Microsoft Loopback Adapter creation:
===========================
Step 1: Programs -> control panel -> Add Hardware.
Step 2: In the Add Hardware wizard. Click 'Next' and select 'Yes, I have already connected the hardware'. option and click on 'Next'.
Step 3: Select the last option 'Add a new hardware device' from the 'Installed hardware' window and click on 'Next'.
Step 4: Select the last option 'Install hardware that I manually select from the list (Advanced) and click on 'Next'.
Step 5: Select 'Network adapters' in 'Common hardware types' list and click on 'Next'.
Step 6: Where you can see 'Microsoft loopback adapter' on the right hand side of the frame.
Step 7: proceed with all default installation and then try installing Oracle.
I hope this will suffice.
Thanks
Venugopal

JDBC Adapter Connection Issue

Hi Experts,
The scenario is file to JDBC, the messages are getting failed in XI MDT with the following error "JDBC Message processing failed ,reason when attempting to get processing resources: com.sap.aii.af.service.utill.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL<JDBC Connection details maintained in CC>: SQLException: Io exception: The Network Adapter could not establish the connection".
We got this error after changing the IP addreass of the Oralce system. we did maintained in all the communication channels with new IP Address, previously the data is updating to the Oralce table with old IP addreass.
IP address is also maintained in XI Host file. We are able to ping the Oralce from XI with new IP.
Can any body suggest how to rectify the issue.
Thanks in Advance
Bhaskar

Hi,
have you checked cache status. It is possbile that the change hasn't been applied yet. That would explain, why the database can't be reached.
Stop/Start of communication channel might also help. Sometimes it si necessary to restart the whole JDBC Adapter.
If all this fails, you should get yourself a free copy of DBVisualizer, use the same database driver as is installed on PI, provide credentials and try to reach database. Might also be a driver issue.
Regards
Sven

Problem with Oracle 10g RAC VIP network setting at Solaris 9

Dear All,
I have tried to set up a Oracle 10g RAC Release 2.
With OS solaris 9, and 2 nodes.
The nodes setting as the following:
nodes 1:
Public address: 172.16.0.121
Private address: 192.168.0.121, 192.168.1.121 (dual path for heart beat)
nodes 2:
Public address: 172.16.0.122
Private address: 192.168.0.122, 192.168.1.122
And i have assigned two IP adress 172.16.0.131, 172.16.0.132 as the VIP address for the
RAC.
And the following is the /etc/hosts file:
root@shk01 # cat /etc/hosts
# Internet host table
127.0.0.1 localhost
# public address
172.16.0.121 shk01 loghost
172.16.0.122 shk02
# heart beat
192.168.0.121 shk01-priv1
192.168.1.121 shk01-priv2
192.168.0.122 shk02-priv1
192.168.1.122 shk02-priv2
# VIP address
172.16.1.131 vip-shk01
172.16.1.132 vip-shk02
But when i run the command "$ ./runcluvfy.sh comp nodecon -n shk01,shk02 -verbose"
it shows the error:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
I did try to add the VIP address on bge0:1, as i using bge0 for the public address.
Both nodes i did using the same interface name for it.
Anyone have idea for me to check out the error?
Also, I have other question about the raw device.
As there is option for setting for ASM or raw device. If choosing raw device, does it mean that it just need to
format the storage disk but without newfs it? And then the Oracle program will able to handle it?
Thanks,
Xentar

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

Oracle 10g on Windows - How to connect?

May be this is a small one, I dont know how to connect to sql in windows.
I installed oracle 10g on Windows XP SP3, choosing basic Installation.
Successfully Installed.
In Linux we use sqlplus '/as sysdba' to connect and we get sql> prompt.
In windows how to connect or get SQL> prompt?

You can remove the quotes. Like Unix, this only works by default if you are connected as operating system user owner of Oracle Database software installation.
C:\>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jul 24 08:54:01 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL>

P965 PLATINUM / REALTEK network adapter connectivity problem

hi,
I cannot connect my PC with my laptop using a crossover ethernet cable. All of the crossover cables I have tested operate as expected when used to connect other computers. A fact that complicates things more is that the connection status is indicated as "connected" in the network connections window but no packets are received at all.
My configuration:
MSI P965 PLATINUM (flashed with v1.2 BIOS)
OS: Windows XP PRO SP2
REALTEK driver version: 5.654.721.2006
Network IP, mask and gateway are manually assigned.
Note1: The network adapter works totally fine when connected with my router using a straight UTP cable.
Note2: My brother's PC (which has exactly the same configuration as mine) has the same problem.
Thanks in advance

Thank you all for your tips.
Please note that network file sharing is enabled. If I use my ADSL router as a gateway (it is 192.168.1.1 as you can see in the ipconfig commands output) the computers do communicate.
Problems arise when I use a crossover or straight cable to connect directly my desktop and laptop. Some things I have tried:
- I have disabled the firewalls on all computers.
- If I ping the localhost (127.0.0.1) I get packet replies. However, when I ping the other host I get timeouts.
- I have set the connection speed manually from the device manager to 100mbit/full. Still no good.. :(
P965 PLATINUM (DESKTOP PC)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : desktop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-16-17-EF-3B-04
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
ACER ASPIRE 1403 (LAPTOP)
Code: [Select]
C:\Documents and Settings\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 Network Connection
Physical Address. . . . . . . . . : 00-02-3F-B1-F7-89
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.99
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
Is there any utility to check my network adapters? It is a VERY weird situation, because on both adapters the green light is constantly ON, and the orange flashes from time to time. I assume this means that on hardware level everything is fine. Moreover, I cannot believe that there is a firewall/AV that interferes, because even if I shut them down, I still can't ping the other host.
Thanks in advance

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

DB Adapter connectivity issue

Hi,
I am trying to create a BPEL process which connect to a Custom oracle database using DB adapter. This process is supposed to read data from custom table and populate elsewhere. In BPEL designer I am able to create the connection, view the tables and create mapping. Then I deployed the process. Now when I try to test the process by inserting data to the table, it is throwing following error message in the log and no process is getting initiated in the console. Any thoughts on what could be the problem? Is there anything that I am missing after creating and deploying the process?
<2006-02-21 17:42:16,023> <WARN> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.InboundWork runOnce> Exception during polling of the database ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [DatabaseAdapter], Descriptor name: [CDHTestPrj1.CustomerMaster]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Local Exception Stack:Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: ORA-00904: "COMPLETE": invalid identifier

Hi,
I am trying to create a BPEL process which connect to a Custom oracle database using DB adapter. This process is supposed to read data from custom table and populate elsewhere. In BPEL designer I am able to create the connection, view the tables and create mapping. Then I deployed the process. Now when I try to test the process by inserting data to the table, it is throwing following error message in the log and no process is getting initiated in the console. Any thoughts on what could be the problem? Is there anything that I am missing after creating and deploying the process?
<2006-02-21 17:42:16,023> <WARN> <default.collaxa.cube.activation> <Database Adapter::Inbound> <oracle.tip.adapter.db.InboundWork runOnce> Exception during polling of the database ORABPEL-11624
DBActivationSpec Polling Exception.
Query name: [DatabaseAdapter], Descriptor name: [CDHTestPrj1.CustomerMaster]. Polling the database for events failed on this iteration.
If the cause is something like a database being down successful polling will resume once conditions change. Caused by Local Exception Stack:Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseException
Exception Description: java.sql.SQLException: ORA-00904: "COMPLETE": invalid identifier

T60p and T61 LAN adapter connection issues

Hi all,
Strange issue concerning LAN adapter on both T60p and T61. Either thinkadvantage laptop is at a different remote location connected to headquarters via a ptp link(fibre). This remote link has been updated recently. DHCP is assigned from main officeto all user locally and at the two remote sites.
For some very strange reaso, these both laptops are the only systems at the remote site that cannot get assigend ip settings via DHCP. Also if I manually assign them static ip settings, (the limited or no connectivity icon disappears) which i presumed but there is still no connectivity to these two laptops via ping cmds etc.
Even more strange is when these laptops are brought to back to headquarters and are plugged into the network here, they get assigned ip settings like they should and everything works like it should.
Also all the other systems at the remote sites get their ip settings dynamically like they should.
The LAN adapters are intel
I have reinstalled drivers, used winsock repair tools and also plugged the laptops directly into the fibre swtich on the dedicated vlan port that connects to the local swtich at the sites. Still same syptom
I am very confused at the moment and would appreciate any advice or solution. At the moment I believe its how the network card communicates with the protocol on link maybe there is an issue. I am not sure. Appreciate any input guys/gals

Hi,
Do you enable ESB email notification in ESB Control for your ESB system and mail still not received?
Some errors cannot be caught by ESB email notification (for example, you use polling DB-adapter and provide a incorrect login password and so on, you can use rejection handlers for this type of errors. I not implemented this yet in our system but think it should work).
Errors raised when you ESB-process already started - may be caught.
You will receive email with flow_id, initial payload and error message (if didn't use asynchronous calls: bug 7616012 - error message is empty when error raised after asynchronous service invocation in 10.1.3.3 (can be not visible..)).
Best Regards,
Mikhail.

Database migrated from Oracle 10g to 11g Discoverer report performance issu

Hi All,
We are now getting issue in Discoverer Report performance as the report is keep on running when database got upgrade from 10g to 11g.
In database 10g the report is working fine but the same report is not working fine in 11g.
The query i have changed as I have passed the date format TO_CHAR("DD-MON-YYYY" and removed the NVL & TRUNC function from the existing query.
The report is now working fine in Database 11g backhand but when I am using the same query in Discoverer it is not working and report is keep on running.
Please advise.
Regards,

Pl post exact OS, database and Discoverer versions. After the upgrade, have statistics been updated ? Have you traced the Discoverer query to determine where the performance issue is ?
How To Find Oracle Discoverer Diagnostic and Tracing Guides [ID 290658.1]
How To Enable SQL Tracing For Discoverer Sessions [ID 133055.1]
Discoverer 11g: Performance degradation after Upgrade to Database 11g [ID 1514929.1]
HTH
Srini

HP Laserjet 4250 Network Printer Connection Issues

Hello
We have a HP 4250 Laserjet network printer set up as a shared printer on our Windows Server 2003 32-bit print server.
We are using the latest PCL 5e 32-bit drivers and have now added the PCL 5e 64-bit drivers to accomodate a new Windows 7 Pro 64-bit Laptop. However, although it appears to pull the driver across properly, it fails to communicate and complete the installation with the following error:
"Printer Cannot Connect Operation Failed' error 0000007e
I have apoplied the hotfix addressed which addresses a similar problem but this made no difference. http://support.microsoft.com/kb/981070/en-gb
Any ideas what I could try next?
Kind Regards
Simon Emms

Hello Tornado1,
The HP Laserjet 4250 is a commercial printer. To have a better chance at finding a solution, I recommend posting in the HP Business Support Forum.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Oracle 10g RAC - public network interface down

Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Tads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Having trouble with social networks and connection issues

My iPad won't load any pictures on facebooks website, or the app. It will load google pictures but on Facebook they come up as a blue question mark and it also won't let me log into intagram or snapchat, it says check your network connection. Also my app store won't load. Is there anyway to fix this? I restarted my iPad multiple times and cleared all cookies and data but it didn't help. I had a provisioning profile from an GBA emulator awhile back and I deleted the emulator but not the profile. I recently tried to download the emulator again and this is when problems started. I deleted the profile but nothing seems to work. I have an IPad 2, is there anyway to fix this without going to Apple? I'm not good with all this tech stuff

Your post indicates you have used Cydia, which is a software application for iOS that enables a user to find and install software packages on jailbroken iOS Apple devices. Since your iPad has been jailbroken, we can't help you in this forum. Best bet is to Google for answers.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
http://support.apple.com/kb/HT3743
If you jailbreak your iPad:
1. Your Apple warranty, if any is remaining, is canceled.
2. We can't help you in these forums.
3. Apple Support and the Genius Bar won't help you.
4. You can get a virus and malware.
5. You may "brick your iPad and have an $$$ paperweight.
What is Jailbreaking iOS? Should I do it?
http://tinyurl.com/mn5umca
 Cheers, Tom

Oracle 10G on XP : Network Adapter Connection Issue

Similar Messages

Maybe you are looking for