Oracle 8i connectivity with DB2

Hi,
I want to connect to DB2 from Oracle 8i. I have read some documentation about Oracle gateways but it is not clear of how exactly we can connect to DB2.
If any one has done this before please let me know th detail steps of how we can connect to DB2.

For your kind information (more)
When I used JDBC-ODBC Bridge,
It just gave an error message : [Microsoft ODBC for Oracle]
and
when I tried the command at DOS prompt,
javap oracle.jdbc.driver.OracleDriver
it gave message ERROR: javap oracle.jdbc.driver.OracleDriver could not be found
Please Help me
Hara Gopal

Similar Messages

  • Oracle ODBC Connectivity with db2

    I want to connect forms/reports with
    IBM DB2 Database installed on the
    same machine.But while connecting
    through odbc driver it gives "Invalid
    session id,access denied"and does not
    get connected.Same message comes when
    one gets connected to sql but it runs fine.
    I have tried in two ways to configure ODBC.
    1. Using Client Configuration Assistant
    of DB2.
    2. Usgin OCA and Intersolv odbc
    driver coming along with the cd.
    Forms and reports are 6i and
    db2 version is 5.
    Thanks in advance.
    Milind

    Dear Ajay,
    I used heterogenous connectivity to connect to DB2 but it is very very slow. And checked about Oracle gateway to Db2 and came to know that it is also very slow. The next solution was using ODBC to db2 using Forms 6i Patch 13. The connectivity is very good otherwise u can use DB2 Information Integrator software (cost about $20-50 K). If you need any more information please let me know.

  • Howmany oracle user connect with oracle server.

    hi all
    howmany oracle user connect with oracle server.
    i want query for above sentance.

    Robert,
    This query will show us the username who are connect to a particular database. If OP wants that how many overall users are connected to his/her oracle server (which is having more than one db) then please tell us. Suppose 10 users are connected with db1 and 20 users are connected with db2.. like that.
    Regards
    Girish Sharma

  • NetBean, I can't establish the oracle database connection with version 9i.

    In NetBean, I can't establish the oracle database connection with version 9i.
    I have create the datasource and it is fine.
    when i try to access the tables i get a message
    "Unable to refresh children, connection is broken, unsupported feature"
    in netbeans.
    Does netbeans support oracle 9i version.
    Thanks,
    VKK

    In NetBean, I can't establish the oracle database connection with version 9i.
    I have create the datasource and it is fine.
    when i try to access the tables i get a message
    "Unable to refresh children, connection is broken, unsupported feature"
    in netbeans.
    Does netbeans support oracle 9i version.
    Thanks,
    VKK

  • Setting up Secure connection with DB2 database on IBM iSeries

    We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

    We have requirement to setup Secure connection with DB2 database on IBM iseries system. currently we are using ODBC type of connectivity which is not secure. Can anyone help how to set up Secure connectivity. below are the system details . . Application - IDQ - 9.6.0 Database - DB2 on IBM iSeries AS400

  • Oracle heterogeneous connectivity for DB2

    Hi,
    We want to connect DB2 database with Oracle 8i. We have read that it is possible with Generic connectivity and Transparent gateways.
    Any one knows the differece between the two when connecting to DB2?
    Which one is simpler if we have to use dblink concept
    Thanks,
    Ajay

    Dear Ajay,
    I used heterogenous connectivity to connect to DB2 but it is very very slow. And checked about Oracle gateway to Db2 and came to know that it is also very slow. The next solution was using ODBC to db2 using Forms 6i Patch 13. The connectivity is very good otherwise u can use DB2 Information Integrator software (cost about $20-50 K). If you need any more information please let me know.

  • Java connectivity with db2 in linux

    hi all,
    i wish to know how to connect java with db2 in linux.actually which is the string that is to be included in the following:
    class.forName("//which is the string that is to be included here");
    Connection con("jdbc:????");

    hi all,
    i wish to know how to connect java with db2same as every other database and OS. JDBC is the way.
    in linux.actually which is the string that is to be
    included in the following:
    lass.forName("//which is the string that is to be
    included here");full name of the DB2 JDBD driver class.
    Connection con("jdbc:????");look at the docs for your JDBC driver to figure out what the URL needs to be.
    %

  • Oracle 8i connectivity with Developer-6.0 on Desktop

    Dear Sirs,
    I wish to seek your help.
    I am having a pentium 300, with 128 MB of RAM, a sufficient space of Hard disk available with Windows NT 4.0 server. I've done oracle 8i typical installation. My server name is XYZ and Oracle database name is ABC. When I install Developer-6.0 on same machine, it is unable to connect to its destination and flashing error ora-12203.
    If possible, kindly get me out from this problem .
    Thanking you,
    Raj

    Raj,
    cmentha above for solving this problem.
    Below you will find the code for the listener.ora file.
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS =
    (PROTOCOL = TCP)
    (Host = 127.0.0.1)
    (Port = 1521)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = ADMIN
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = ORCL)
    (SID_DESC =
    (SID_NAME = extproc)
    (PROGRAM=extproc)
    Good Luck.

  • Oracle 8i connectivity with JDK1.4.2 - Failure - Help Needed

    I'm new to Java-ORACLE connectivity.
    I have installed Oracle 8i v8.1.5 in my Windows 2K Adv. Server with JDK1.4.2.
    But I could connect to Oracle from Java neither thru JDBC-ODBC nor JDBC thin drivers.
    What are the files ( or classes ) needed for connectivity and where can I download them.
    Do the Oracle8i 8.1.7 JDBC drivers have backward compatibility with Oracle8i 8.1.5 ?
    Please help me in this regard with utmost information possible and sample code.
    Thanks in Advance.
    Hara Gopal

    For your kind information (more)
    When I used JDBC-ODBC Bridge,
    It just gave an error message : [Microsoft ODBC for Oracle]
    and
    when I tried the command at DOS prompt,
    javap oracle.jdbc.driver.OracleDriver
    it gave message ERROR: javap oracle.jdbc.driver.OracleDriver could not be found
    Please Help me
    Hara Gopal

  • Very slow connection with db2 ver 9.1 client on win2000

    I have been having difficulty in diagnosing why when after installing db2 9.1 fp5  client on our wind2000 box which has Crystal Embedded 10 RAS ( service pack 6 ) running, the reports  that i am invoking using the Java SDK ( we have an  online J2ee web application ) are very slow. I have narrowed the problem area down to where the java sdk is trying to set the table location.
    Using the db2 7.1 client since 2005, we have not had this issue. We must upgrade to ver 9.1 db2 since this is being done at  an enterprise level. I upgraded our test server to 9.1 and noticed this slowness. With the 7.1 db2 client and the same RAS server, the reports take about 2 or 3 seconds but with the 9.1 client the reports take about 40+ seconds each and this is always as the setTableLocation method. Once is goes through this, the rest runs fine.
    I have tested this with a local db2 datbase on windows, a remote db2 database 3000 miles away ( same as with what the 71 client runs against) and it is consistently the same response time.
    I did notice that if I ran my java online on the same server as the RAS server, the response time is great. This only seems to be happenning when the java app is not on the same server as the RAS server.
    I also have a java stub that does not run in a web container. in this case, with the same code and the same databases, whether i am local or remote from the crystal server, the response time is 40+ seconds to connect.
    The .rpt files are developed via Crystal Reports 10 and we develop on a local database and we modify the database credentials throught the SDK as we deploy upto production. I have also tried this with the same database we developed with and the same 40+ seconds connect time.
    All of these scenarios work fine with the 7.1 client.
    so it seems there is some connection issue with the 9.1 client only.
    Need help urgently.

    I have exactly the same issue.

  • Connecting with DB2

    Hi gurus,
    We have a problem: we have sap running over Solaris and MaxDB, and need to connect this DB with AS400/DB2
    Is there any way to do that?
    Thanx in advance.

    Hello Peluka,
    1. 1. As SAP customer you have the option to create the OSS ticket to the component "BC-DB-SDB" and get SAP support.
    2. What is the version of your system?
        What is the SAP Kernel version on your system?
    3. Please review the SAP note:
           1037016     IBM i: MaxDB Client Support for IBM i application server
        This note may have answer on your question.
    Thank you and best regards, Natalia Khlopina

  • Oracle 9i Connectivity with php

    Hi,
    I am new to php and unable to connect to oracle database 9i.
    I have php and appache on one server and databse on the other server.
    I am using Appache 2.2 and php 5.2.8 (un-zippedinc:\php).
    I have place the php.ini in windows directory
    I m getting the following error: PHP Warning:  PHP Startup: Unable to load dynamic library 'C:/php/ext\\php_oci8.dll' - The specified procedure could not be found.\r\n in Unknown on line 0
    in appache error log.
    and on php page i use the oci_connect which give the following error:
    Fatal error: Call to undefined function oci_connect() in C:\Apache\htdocs\main.php on line 3
    Please Help me to solve this problem._
    Regards,
    Raza

    From error listing we can see that your PHP+Apache installation doesn't support Oracle(OCI) functions
    Additional modules not installed
    I recommend you use "Zend for Oracle"
    You may learn and download that product from this url:
    http://www.zend.com/en/products/core/for-oracle
    Edited by: Vladandr on 17.02.2009 1:54

  • Oracle 10g connectivity with sql server 2000 through oracle transpa gateway

    dear gurus.
    i am to connecto oracle 10g with sql server 2000 through oracle transparent gateway.
    i have installed transparent gateway and proper configured. also link is created.
    but when i execute query "select * from city@inventory" , so an error displayed.
    ORA-12500: TNS:listener failed to start a dedicated server process.
    kindly suggest me what could be the cause.
    regards,

    if the listener fails to spawn a dedicated server process it is commonly indicating an issue with the listener. So posting the listener and also a listener trace including a description of the env where you installed the gateway into which directory would be helpfull. Please keep also in mind if you have for example a 10.2.0.3 database and you install into this directoty a 10.2.0.1 gateway you have to reapply the patchset again do get consistent file version.
    So please describe more detailed your env.

  • WSAD 5.1.2 connectivity with DB2 Server v9.1

    Hi,
    I am using WSAD 5.1.2 which is having jre 1.4.1.
    I want to connect my database DB2(server) v9.1. But, while creating a new DB connection through DB Perspective, I get the DB options only till DB2 8.1 only.
    So, can any one please tell me how could i resolve my issue by connection WSAD 5.1.2 to DB2 v9.1.
    Thanks in advance
    Sharad

    Nevermind... I figured it out. It wasn't the database connectivity that was the problem at all. The ConnectException was coming from the fact that the cactus.properties file (brought over from the WSAD 5.0 project) still specified port 8080 for the localhost. In 5.1.2 the default port is 9080. I saw a comment somewhere about a "cactus.properties" file... looked for it, noticed the port, all is well. Hope this can help someone else.

  • How make connection using data source with db2

    hiiiiii,
    please tell me the procedure to connect with db2 through data source (driver should support updatable ResultSet)

    Read the documentation of the application server used how to create a datasource. Once done that, you can obtain it in your Java code by JNDI. After retrieving the DataSource instance from JNDI, you can just use DataSource#getConnection() to acquire a connection from that datasource.

Maybe you are looking for