Oracle 9i Database installation

Database : Oracle 9i (9.2.0.1.0)
Linux : Redhat Enterprise Linux 4 (WS)
Kernel : 2.6.9-5.EL
Java : jre 1.5.0_08, jdk 1.5.0_07
With above mentioned setup, while I try to install Oracle, I faced following error :
Unable to load nativelibrary : /tmp/Oracle<Time stamp>/jre/lib/i386/libjava.so:symbol __lib_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference.

The JDK included with Oracle 9i used an undocumented Linux kernel call. The Linux kernel you have does not have this kernel call publicly.
You could download a newer version of the JDK 1.3 from Sun's web site java.sun.com
Or, you could build a special libwait.so and load this library when running the oracle installer.
http://www.puschitz.com/InstallingOracle9i.shtml
Read the part starting from here:
Packages (RPMs) for Red Hat Enterprise Linux Advanced Server 4 (RHEL AS 4)
If you do not have MetaLink access, read this article about creating a libcwait.so
http://www.tldp.org/HOWTO/html_single/Oracle-9i-Fedora-3-Install-HOWTO/
And read the section
7.1. Apply the libwait.c patch

Similar Messages

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Oracle 10g database installation in red hat 5

what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

Where can I download the Oracle 10g Database Installer

where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.

981705 wrote:
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Oracle 11g database installation

Hello,
I just want to install the oracle 11g database system in my Archlinux. I've looked the wiki but it's a little bit old.
So has someone tried these days installing it in Arch? How is it going? And the AUR script works?
Another question is how mush size it will be when installed?
Thanks!

I have successfully installed Oracle 11g R2 using the instructions in the Dutch article on the wiki: https://wiki.archlinux.org/index.php/Or … erlands%29 (Google translate is useful).
I had an issue with the db console, but dropping and recreating the repository sorted that out: http://www.bestremotedba.com/how-to-dro … er-in-10g/

Minimum System Requirement for Oracle 12c Database Installation

Hi,
       Can Anybody please tell me the minimum requirement ti install Oracle 12c Database On Virtual Box.
Regards...
Asit

Enterprise Edition        6.4 GB
Standard Edition          6.1 GB
Standard Edition One   6.1 GB
This are the pure hdd requirements.
Then it's 1 GB of space in the /tmp directory.
Minimum: 1 GB of RAM
Recommended: 2 GB of RAM or more.
Swap Space Requirement for Linux:
Between 1 GB and 2 GB.
1.5 times the size of the RAM
Between 2 GB and 16 GB
Equal to the size of the RAM
More than 16 GB
16 GB

Error while doing the Oracle 9i Database Installation

PROBLEM ONE
While installing the Oracle Database 9i on Windows 2000 Server with 256 MB Ram, I got the following error
Windows - Wrong Volume
The wrong volume is in the drive. Please insert volume ORCL9011_1 into drive E:.
This message occured when percentage done was 100%. It was copying visualsdo.exe
PROBLEM TWO
Then I deinstalled the Oracle 9i software and deleted the oracle folder from both the Windows Explorer as well as in the RegEdit.
Again I started doing the installation...
In Oracle Database Configuration Assistant, while it was installing "Adding Oracle JVM", I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-06576:not a valid function or procedure name"
When I clicked Ignore I got the following error
"Oracle Database Configuration Assistant: ERROR"
"ORA-04021:timeout occured while waiting to lock object
SYS.META-INF/MANIFEST.MF"
Please let me know why this problem occured and what is the solution for this......
If you need any information then please let me know
With Regards
Deepak

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Oracle 9i database installation (xp pro) error.

I had unzipped the 3 disk files in one folder, upon installation the oracle installer asked me for disk2, neglecting the fact that the folder had all the 3 files unzipped, I again unzipped the disk2and disk3 in a different folder and the directed the installation to disk2 folder. Strangely the installer never asked for disk3 and ended the installation with the following error:"Configuration tool Agent Configuration Assistant failed
Parameter "orahome" = C:\oracle\ora92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Result code for launching of configuration tool is 1
Setting value of SHOW_END_SESSION_PAGE to true".
My main purpose is to experiment with PL/SQl and SQL PLUS. Can you let me know in what way will any of the oracle service be affected? Is there any way I can just install disk3? Thanx in advance.

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Oracle 11g database installation failure

Hi All.
Iam tyring to install OIM 11g database on RHEL 6 installed in a VM. I have followed the oracle guide to install oracle Db on linux. Set the display variable .but when OUI is getting started the following error is thrown.
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x0000003a48c14d70, pid=3451, tid=140676870371088
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
# An error report file with more information is saved as hs_err_pid3451.log
[thread 140677929178880 also had an error]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
^
C
Please help me out.
guest OS :RHEL 6 64 bit
JAVA:java version "1.7.0_07"
Java(TM) SE Runtime Environment (build 1.7.0_07-b10)
Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode)
Host: WINDOWS 7 64 bit
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode, sharing)

Hi,
On a different note, I used Oracle Linux 6.0.0.0 64 bit , jdk 1.6.0_30 and database 11.2.1.0 and then ran the following command:
./runInstaller -jreLoc /opt/apps/jdk1.6.0_30
I am able to get installation screen. But if i dont specify jreLoc options its defaulting to OS jdk although i have specified JAVA environment variables like inlcluding in path and setting JAVA_HOME.
thanks and regards,
Rajan Kumar

Oracle 11g Database Installer - INS-08102 error

After I click next on Installation option screen, I get the error message [INS-08102] Unexpected error occurred while transitioning from state 'installOptions'
The details say:
Cause - No additional information available. Action - Contact Oracle Support Services or refer to the software manual. Summary - java.lang.NullPointerException
I get this error regardless of the Installation option I select.
I am installing it on a windows XP and I am logged on as Administrator. I have the installers on c:\database
The error log is empty.
Any ideas or suggestions?

hiii
i was also facing the same problem but what i did is uninstalled any previous traces of oracle and deleted oracle folder from program files and it worked fine....

Oracle 11g database installation error

Hi all,
I try to install oracle database 11g in my machine but end of the installation getting some error like OUI -25031 as follows.pls help me
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Net Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to d:\oracle11g
Configuration directory is set to d:\oracle11g\cfgtoollogs. All xml files under the directory will be processed
INFO: The "d:\oracle11g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is D:\oracle11g\oui\bin\runConfig.bat ORACLE_HOME=D:\oracle11g MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home D:\oracle11g we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing D:\oracle11g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is D:\oracle11g\cfgtoollogs\configToolFailedCommands.bak.15
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "d:\oracle11g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "d:\oracle11g\cfgtoollogs\configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is D:\oracle11g\oui\bin\runConfig.bat ORACLE_HOME=D:\oracle11g MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home D:\oracle11g we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing D:\oracle11g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is D:\oracle11g\cfgtoollogs\configToolFailedCommands.bak.16
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: The OUICA command is launched from D:\oracle11g\oui\bin\ouica.bat.
INFO:
*** End of Installation Page***
The installation of Oracle Database 11g was successful, but some configuration assistants failed, were cancelled or skipped.
by
vijay
Edited by: 849135 on Jun 20, 2011 3:15 AM

Hi,
Pl. post complete error stack and mention the OS type and version.
thanks,
X A H E E R

Oracle 11gr2 database installation using ASM on standalone Server.

Hello Guys,
Environment is as below:
Oracle 11gr2
ASM
Enterprise Linux Server release 5.5 (Carthage)
I never did oracle 11gr2 installation using ASM and I need to install Oracle software on standalone server and then create database 11g Release 2.
I have following doubts:
1. Do we need to install Grid infrastructure software for standalone server as well ?
2. Does Grid Infrastructure software comes separately or alongwith DB software ?
3.Is Grid software same for RAC and standalone server setup ?
4.Do we need to create user Grid for installation of Grid for standalone server as well ?
can anyone give me full steps from scratch ?
Regards,
Edited by: LazyDBA11g on Apr 10, 2011 12:44 AM
Edited by: LazyDBA11g on Apr 10, 2011 12:47 AM

Hello sb,
Please find below the output of desired commands:
[oracle@yyy ~]$ id
uid=54321(oracle) gid=54321(oinstall) groups=54321(oinstall),54322(dba)
[oracle@yyy ~]$ env | sort
_=/bin/env
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/home/oracle
HOSTNAME=yyy.in
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=:/u01/app/oracle/product/11.2.0/db_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;0 1:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.b tm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31: *.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:* .bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;3 5:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1
PATH=/u01/app/oracle/product/11.2.0/db_1/bin:/usr/kerberos/bin:/usr/local/bin:/b in:/usr/bin:/home/oracle/bin
PWD=/home/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.20.1.139 4320 22
SSH_CONNECTION=172.20.1.139 4320 172.20.1.11 22
SSH_TTY=/dev/pts/1
TERM=xterm
USER=oracle
Regards,

Oracle 9i Database installation error ORA-27102: out of memory HELP

Hello
Appologies if this post has been answered already, or if I am meant to post some data capture to show what is the issue however i am a bit unsure what I need.
I have downloaded oracle 9i for my university course as I need to have it to do some SQL and Forms building.
I have had a lot of issues but I have battled through them - however now I am stuck on this one.
I install Oracle and then the below:
Install Oracle Database 9.2.0.1.0
Personal Edition 2.80gb
General Purpose
I leave the defualt port
Set my database name
Select the location
Character set etc
then the database config assistant starts to install the new database at 46% i get the error on a pop up window :
ORA-27102: out of memory
How can I resolve this??
I am a mainframe programmer and not at all in anyway a windows whizz - please oculd someone help a dummy understand??
Again thank you all very much

You have too few RAM on your machine, even you could successfully create an instance, it's going to slow as hell.
When you run DBCA to create database, instead of actually creating the database you could choose to dump the SQL scripts and files used for database creation to a directory. This way will give you a chance to modify pfile and reduce the SGA parameter. I believe the default SGA of instance created by DBCA is already beyond your RAM limit.

Oracle 10g Database installation error

I have come up with the message below when I click on setup.exe to launch OUI.
Using paramFile: C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\bin\win32\oraparam.ini
Checking requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
Actual 5.1 Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 65536 Passed
Checking if CPU speed is above 300 MHz.
Actual 3006MHz Passed
All requirements met.
However, when the checking requirements process is done,
there's pop up window titled "Java Virtual Machine Launcher" saying "Could not find the main class. Program will exit".
I have tried to change the location of JRE in oraparam.ini file for searching the main class. But it does not work. Please help. Is this because my oraparam.ini does not indicate the location of the main class required for the JVM launcher?
Thank you very much

Thanks for the help. However, I am not sure what you meant in your answer.
Let me show my oraparam.ini file below. Please let me know if there's anything to be changed in the file. Thanks a lot.
[Oracle]
DISTRIBUTION=FALSE
SOURCE=C:\Oracle_Setup\stage\products.jar
LICENSE_LOCATION=
JRE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.jre\1.4.2.0.0\1\DataFiles\Expanded
OUI_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\ouica\win32
OUI_CORE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=
"OUIHome"
NLS_ENABLED=TRUE
JRE_MEMORY_OPTIONS=" -mx96m"
NO_BROWSE=/net
BOOTSTRAP=FALSE
THIN_JDBC_FILENAME=classes12.jar
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#JRE_OSDPARAM is to set OS dependent param for JRE ( mainly for native VM in 1.3.1)
#JRE_OSDPARAM is optional and should be set to -native for the JRE's
#that support native VM ( mainly for Unix platforms ), in JRE 1.3.1
#For JRE 1.4.1 this should be set to empty or the type of VM that is
#supported client/server. The default value is -native in UNIX platforms
#that supports native VM
#Unix supporting native -
JRE_OSDPARAM=""
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
#Unix NOT supporting native and 1.4.1 - JRE_OSDPARAM=""
#Windows : DO NOT SET or JRE_OSDPARAM=""
OUI_VERSION=<2.3.0.10.0>
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
#SHOW_HOSTNAME=ALWAYS_SHOW
#shows the hostname panel always
SHOW_HOSTNAME=NEVER_SHOW
#does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW
#shows the hostname panel on condition
#SHOW_HOSTNAME=NEVER_SHOW
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Windows=4.0,5.0,5.1,5.2
Linux=redhat-2.1AS
HPUX=B.11.11
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[Solaris-5.6-required]
#Minimum temp space required by OUI, Increase it if your product installation so requires
#Temp space is required for bootstrap and during installation
#The TEMP_SPACE should be the first pre-req to be checked
TEMP_SPACE=150
#PACKAGES required by JRE and Product, /usr/bin/pkginfo gets list of packages on system
PACKAGES=
#Use PACKAGES_FAILURE_MESSAGE for custom error message for PACKAGES check failure
#CPU speed required, use /usr/sbin/psrinfo -v to get the speed
CPU=300
#Use CPU_FAILURE_MESSAGE to display custom error message for CPU check failure
#MIN_DISPLAY_COLORS required by OUI, use /usr/openwin/bin/xdpyinfo to get the colors
MIN_DISPLAY_COLORS=256

Oracle 10g database installation

Hi
I installed 10g database on my Win2K OS. I had accepted defaults and could even open up the EM from the browser. Later I installed Oracle 9iDS on the same machine but different home. Now when I invoke EM console, it says database is unavailable. Tried the 'Startup' from the console but in vain. I found that there was no tnsnames.ora file in the Oracle 9iDS home directory (c:/oracle/product/9iDS/network/admin). So copied the tnsnames.ora and listener.ora files from 10g HOME directory. But couldn't get to work.
Later I added a registry key TNS_ADMIN under the HOME0 for ALL_HOMES. I entered the key value to point to tnsnames.ora file in 10g HOME directory. No luck.
At the command prompt I can connect to SQLPLUS as dummy. At SQL prompt conn / as sysdba gives me the error:
ORA-12560: TNS:protocol adapter error
Could one of you resolve this issue?
Thanks

Now I tried to ping orcl
c:\tnsping orcl
Output I got was
Used Parameter files:
c:\oracle\product\9iDS\network\admin\sqlnet.ora
c:\oracle\product\9iDS\network\admin\tnsnames.ora
Attempting to contact ...... (SERVICE_NAME=orcl))))
OK (4120 msec)
This means that it actually looks at the tnsnames and sqlnet files in my 9iDS home directory. But my 10g database is in c:\oracle\product\10.1.0\db_1
I have installed Oracle 9iDS in a different HOME (c:\oracle\product\9iDS). Does this mean that these files should not be in mt 9iDS dir but only in 10g dir?
Could anybody explain what I need to do?

Oracle 9i Database installation

Similar Messages

Maybe you are looking for