Oracle B2B 11g question about pulling data from remote TP sftp server

Hi,
We would like replace our custom b2b solution with oracle b2b, but without resulting much changes in remote TP side. To do that the following issues are to be resolved.
1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it.
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type.

1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it. I am not sure what do you mean by AS1 1.1 but yes, SFTP is supported in Oracle B2B and if you want to poll a SFTP location, then you need to create a listening channel in Oracle B2B. For creating a listening channel, please refer -
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/bb_listen_chan.htm#BAJJICJJ
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?Yes, it is possible. There is a setting "Preserve Filename" in transport protocol parameter of a SFTP channel which should be enabled for this purpose.
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type. In case of FTP/FILE/SFTP, file name can be used to pass document type and revision information to Oracle B2B. Please refer "Filename format" setting on the above mentioned link.
I figured it out from another thread about how to pull the file. I configured the listening channel so that it reads from a remote server using sftpo protocol. And I have given the filename format as %FROM_PARTY%.dat. I am putting a file like TESTBC.dat. TESTBC is the name of the remote TP. B2B is reading the file but, recognizes the document tupe, but says that FromTP null. What is the solution?
Make sure that TP name is same as what you are giving in filename (cross-check for spelling). You may also try with default naming convention (do not mention anything in Filename format in listening channel configuration) - %FROM_PARTY%_%TIMESTAMP%.dat
for eg -
Acme_12345.dat
Regards,
Anuj

Similar Messages

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Extract data from remote desktop(presentation server)

Hi friends,
How to import and export data from remote desktop (presentation server) to my sap server.
I have user name password of the remote desktop(presentation server)
Please guide me.
By
Raju

Hello
Question is not clear to me...
Thank u,
santhosh

Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

Hello there,
we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
Any info is GREATLY appreciated. Thank you.
Edited by: cisGuy on Sep 20, 2010 5:31 PM

i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

Question on pulling data from database

I have a question. I have one form in designer and i need to extract data from database. database is in sequel. any help on how do i do this or how can i do this?

If you use a process to interact with the database, this recent thread is very related and would be helpful:
http://www.adobeforums.com/webx/.59b639e7/0
scott

Questions about accessing data from old drives

I am trying to access data from a 10-12 yr old IDE drive that I used with a PC way back when. I place it in an enclosure, and when connected, receive a message via Lion (see attached). Anyone have any idea if the drive may work when connected to a modern PC? Did Windows 10-12 years ago use some system that makes drives not recognizable with Macs OR are the drives just likely bad?
Thanks.

Wired is with Ethernet. Connect both with an Ethernet cable

Question about retrieving data from two tables

Hi everyone.
I've been working on this and was wondering what the correct way of handling this would be.
I have two tables, a Billing Table that contains invoices and related information, and a Payments Table that contains payments and related information to that.
Both tables contain a Date Column for the date that the Invoice was generated or the Payment was made.
I want to get a list of all Invoices and the respective payments if the invoice was generated between two dates OR the payment was made between these two dates.
I can get a list of the invoices and their payments if the invoice was generated between those dates. I can get a list of the payments if they were made between those dates. But I can't seem to figure out how to do both.
How do I Join two tables and have it return the data from both tables if either meets the required Date Period?
Here is the SQL that I have so far. This SQL returns all of the Invoices and Payments IF the Invoice was generated between these two dates (Or updated).
SELECT Billing.ID AS [BID], Billing.AttachmentName, Billing.BillingType, Billing.Invoice, Billing.Description, Billing.Amount, Billing.DateCreated AS [BillingDate],
Payments.ID AS [PID], Payments.Type AS PaymentType, Payments.Payment, Payments.PaymentNote, Payments.Reason AS [BillReason], Payments.DateCreated AS [PaymentDate],
Customers.ID AS [CID], COALESCE(NULLIF(Customers.Company,'') + ' - ','') + Customers.LName + ', ' + Customers.FName AS [Name],
Jobs.ID AS [JID], Jobs.JobType, Jobs.JobStatus, Jobs.JobStatusDate
FROM Billing LEFT OUTER JOIN Payments ON Payments.BillingID = Billing.ID
RIGHT OUTER JOIN Customers ON Customers.ID = Billing.CustomerID
RIGHT OUTER JOIN Jobs ON Jobs.ID = Billing.JobID
WHERE
Billing.BillingType = 'Invoice' AND Billing.PaidInFull = 'No' AND Billing.Collections = 'No' AND Billing.ChargeOff = 'No' AND Billing.Lien = 'No' AND Billing.InvoiceCanceled = 'No'
AND (Billing.DateCreated >= '1/1/2014' AND Billing.DateCreated <= '8/13/14') OR (Billing.DateUpdated >= '1/1/14' AND Billing.DateUpdated <= '8/13/14')
ORDER BY Name Asc, Billing.Invoice, PID
Thanks for your help, I really appreciate it.
-Matt-

I don't quite follow your query, but your description leads me to think that you need the set of Billing IDs for bills that were created as defined or that have payments that were created as defined. From that set of IDs you then simply want all Bills
and their associated payments. So how do you get that set of IDS? One way is the union operator:
with allbill (billID) as (
select ID from dbo.Billings where DateCreated between ...
union
select BillingID from dbo.Payments where DateCreated between ... )
select ...
from allbill inner join dbo.Billings as bill on allbill.billID = bill.ID inner join dbo.Payments as pay
on bill.ID = pay.BillingID
order by ... ;
Your description leads me to believe that you query is much more complicated, but the basic idea is the union in the CTE - generate one combined set of bill IDs that identify all your bills of interest. Note that I assumed that a payment cannot exist
with an associated billing.

Newbie question about extracting data from events

HI
i am sure there is a simple solution to this, but I am getting frsutrated trying to extract useful data from an event:
I have set up and event listner, whatching for CHANGE on a HorizontalList
so far so good, event handler called when a list item is clicked, and the event is passed, but what is the syntax for getting the in particular the columnIndex, which can tantalising be seen as part of the event in debug.
    public function ShowGroupTab(event:Event):void{
            var a:Number =event.target.columnIndex;
causes this runtime error:
ReferenceError: Error #1069: Property columnIndex not found on mx.controls.HorizontalList and there is no default value.

First it would be better to cast your event in the proper class. In this case the event is a ListEvent. ListEvent extends Event so your code will work but be harder to maintain.
Your problem is that you're trying to access the columnIndex property on the event.target instead of the event itself. The event.target is the component on which the action was performed, here it's a HorizontalList, and the list does not have a columnIndex property.
Try this :
public function showGroupTab(event:ListEvent):void{
     var a:int= event.columnIndex;

Question about transferring data from 3GS to iPhone 5

I upgraded from 3GS to iPhone 5. Before reading any articles on transferring data through iTunes, I configured my 3 email programs, contacts and calendar (Google). The Apple instuctions state that I should backup 3GS FIRST, then restore to iPhone 5. Question is, if I do the backup and restore AFTER having configured my mail programs, will that cause problems, such as creating duplicate accounts and contacts? I am especially concerned about creating duplicates in my contact list, which would be a semi-horror if I had to delete every other one of over 1,700 names. Perhaps I should delete my email accounts and contact list BEFORE restoring to my iPhone 5, basically start from scratch?

When restoring the device, whatever is currently setup on the device is irrelevant. Everything currently setup on the device will be erased.

Question about migrating data from mac pro to new macbook

Hello all,
I ordered a new macbook today and i'm very excited. It will be the first time i've had two apple machines simultaneously. My question is in regards to getting my new macbook all stocked up with the files and apps currently residing on my mac pro.
1. I don't know if by using migration assistant if the data is removed from the old machine and added to the new. I don't want that. I want everything currently on my mac pro to remain, unchanged.
2. I'd normally use target disk mode, but no firewire on the macbook, so, no dice there.
3. My startup disk and apps and such reside on one HDD in my mac pro, while my home folder, or user files, or whatever, reside on a separate HDD. will this cause a problem.
Your input is much appreciated.

It can be done with USB, but it is slower and less reliable.
Ethernet works great, IF you have two FUNCTIONAL machines. The great thing about Firewire Target Disk mode was that if the HD/OS was corrupted, or the computer was for some reason unbootable you could still get data off of it quickly, without tools or special equipment. Firewire Target disk mode has saved my rear several times on every machine I have owned.
The hard drive is fairly easy to remove on the aluminum Macbook. I would remove it and install it in an external Firewire enclosure temporarily to transfer your files quickly and reliably, then put the drive back in the Macbook.
Firewire allows two operating modes. One is asynchronous, like USB which suffers from latency, bus contention and collisions.
The other is isochronous mode, and it lets a device carve out a certain dedicated amount of bandwidth that other devices can't touch. It gets a certain number of time slices each second all its own. The advantages for audio/video should be obvious: that stream of data can just keep on flowing, and as long as there isn't more bandwidth demand than the wire can handle, nothing will interfere with it. No collisions, no glitches.

Question about Skywire Documaker - where can it pull data from ?

Does the Skywire Documaker product have an ability to pull data from a Relational Database into a form’s field? What other data sources are available to pull data, besides the extract data file (DAT), and xml file?

In response to your question about where Oracle Documaker pulls data from:
DB calls may be done as part of the document generation process to look up data. However it is not designed to maintain and open DB connection. This is also not a recommended best practice. Transall is shipped as part of the Doucmaker solution and it is designed to connect to multiple sources (including DB) and produce an input file for Documaker. Creating DB connections is considered an IT related task and does not fit in with positioning Documaker as a business user tool.

Error while pulling data from an Oracle database. ORA-01858: a non-numeric character was found where a numeric was expected

I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
    [OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
    An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?

Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
                   from Conference_C C
                   where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Pulling data from oracle into sql server 2005

hi,
these days i am working on sql server 2005 on windows server 2008 64 bit.
and oracle 10g on 32 bit unix.
my problem is that when i am pulling data from oracle into sql server it shows me about *500-700 entries less*.
why this is happening? is it because 32 bit to 64bit? or is it because of different os?

Akki,
are you using snapshot or replication from MSSQL? I am doing the same thing, hope to share your experience.
I am using import/export from MGT studio and pull some data from Oracle database, I am working on how to update the changes on these tables pulled from Oracle.
Thanks,
-hank

How to pull data from oracle GL to planning

Hi all
Can one suggest me how to pull data from oracle GL in to hyperion planning(we are using hyperion planning 9.3 with limited licence for analytic services). i guess we can use HAL ..any thing else
any help is appreciable
regards
M.V

Hi
I appreciate for your response. Yep you are exactly right it is data only, but I do have a problem these people have their licence of limited version of Essbase.
Let me give you the information of their licence agreement.
The licence for the hyperion planning- sytem9 programs includes a limited use license for both the hyperion Essbase- system 9 and hyperion Financial reporting - system 9 programs. Such limited use license means that the hyperion Essbase- system 9 and Hyperion financial reporting -system 9 programs may only be used to access data from the Hyperion planning -system 9 program.
Specifically, the hyperion essbase- system 9 program cannot be used to create Essbase cubes that do not contain data used by the Hyperion planning- system 9 program and the Aggregate storage option component of the Hyperion Essbase - system 9 program may not be used.
1) what it(licence agreement) really means - can you install Essbase, if not how can you create dimensions dynamically using planning.
2) Is it possible without Essbase as far as I know its not possible
3) are we going to face any issues with this licence.
4) Is it possibe to pull data with planning
I appreciate if any one resolve this issue
regards
M.V

UNIQUE Problem in pulling DATA from DATA base table to internal table

Dear Experts,
I am new to ABAP. I have a very basic question but looks a quite puzzling one to me. Hemnce I am posting it here.
I am facing an unique problem in pulling data from database table and populating that data into internal table for further use.
The data in the database table "Zlt_mita" with fields M1 (Employee Name, Type: Char20) and M2 (Employee Code, Type Char7) are:
Plz refer the screenshot in the attached file:
My Code:
1) When I try to pull data from Dbase table by taking M2 as parameter.
     This code is succcessful and I am able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
                 M1   TYPE Zlt_mita-M1,
                 M2   TYPE ZLT_mita-M2,
             END OF ty_DAT.
DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
          wa_dat      TYPE   ty_dat.
PARAMETERS: p_mitar    TYPE Zlt_Mita-M2.
SELECT           M1
                       M2
        FROM     ZLt_mita
        INTO       TABLE it_dat
        Where     M2 = p_mitar.
Loop at it_dat into wa_dat.
   WRITE:/2 wa_dat-M1,
              10 wa_dat-M2.
ENDLOOP.
2) When I try to pull data from Dbase table by taking M1 as parameter.
     This code is NOT succcessful and I am NOT able to populate data in internal table it_dat.
TYPES: Begin Of ty_DAT,
                 M1   TYPE Zlt_mita-M1,
                 M2   TYPE ZLT_mita-M2,
             END OF ty_DAT.
DATA: it_dat        TYPE STANDARD TABLE OF ty_dat with header line,
           wa_dat      TYPE   ty_dat.
PARAMETERS:    P_Mita    TYPE   ZLT_Mita-M1.
SELECT           M1
                       M2
        FROM     ZLt_mita
        INTO       TABLE it_dat
        Where     M1 = P_Mita.
Loop at it_dat into wa_dat.
   WRITE:/2 wa_dat-M1,
             10 wa_dat-M2.
ENDLOOP.
Why is this happening when both M1 and M2 are Type Character fields.
Looking forward for your replies.
Regards
Chandan Kumar

Hi Chandan ,
Database fetch is case sensitive ,So u need to give exact format in where condition.
Make your parameter and database in same case so that you need not worry about case sensitivity .
Check the lowecase check box in the domain .
Then declare your parameter
PARAMETERS:
P_Mita
TYPE   ZLT_Mita-M1 LOWER CASE .
You can do the vice versa also by unchecking lowercase and giving Upper case instead of lower in parameter declartion .
Regards ,
Juneed Manha

Oracle B2B 11g question about pulling data from remote TP sftp server

Similar Messages

Maybe you are looking for