Oracle Database - Database Configuration Assistant

Hello,
When I was installing Oracle Database (at Install Product), it reached Database Configuration Assistant with an error pop out: ORA-12638: Credential retrieval failed. Please advise me, thank you in advance~

This question does not have to be raised in Peoplesoft forum. Please ask this to the Database General forum, thanks.
Thread locked.
Nicolas.

Similar Messages

INS-20802 Oracle Private Interconnect Configuration Assistant failed

Thought I would post what information I've gathered, after facing this error during install of RAC Grid Infrastructure 11.2.0.1 on Red Hat Enterprise Linux Server release 5.5 64-bit, as Oracle Support is once again unable to help. Maybe this will save someone else some time and the aggravation of dealing with lousy Oracle Support.
The error occurs after root.sh has successfully completed on all nodes. Oracle Net Configuration Assistant runs successfully, then Oracle Private Interconnect Configuration Assistant launches and subsequently fails with the following.
[INS-20802] Oracle Private Interconnect Configuration Assistant failed.
/u01/app/oraInventory/logs/installActions2010-12-13_01-26-10PM.log
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: Starting 'Oracle Private Interconnect Configuration Assistant'
INFO: PRIF-26: Error in update the profiles in the cluster
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Private Interconnect Configuration Assistant
INFO: Oracle Private Interconnect Configuration Assistant failed.
INFO: Oracle Private Interconnect Configuration Assistant failed.
I was able to find another error that coincides with the PRIF-26 error: "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent."
I was also able to duplicate the PRIF-26 error by trying to add a non-existent network interface via oifcfg:
./oifcfg setif -global jjj1/192.167.1.0:cluster_interconnect
PRIF-26: Error in update the profiles in the cluster
My best guess is the Oracle Private Interconnect Configuration Assistant makes a call to oifcfg. When oifcfg makes an update or adds a public/private interface, some XML files are also updated or maybe cross-referenced. These files are located here: <grid_home>/gpnp/<host>/profiles/peer
Any updates/changes/addtions to the private or public interfaces include changes for the Grid Plug-n-Play component, which uses the XML files. If the interface name is not contained in the XML files, my best guess is that triggers the "CRS-2324:Error(s) occurred while trying to push GPnP profile. State may be inconsistent.
I verified everything was configured correctly; the cluster verification utility reported everything was ok. I also ran the cluster verifcation utility against the GP-nP:
./cluvfy comp gpnp -verbose
I also reviewed the public and private interfaces via oifcfg and they are correct:
[oracle@ryoradb1 bin]$ ./oifcfg getif -global
eth0 10.10.2.0 global public
eth1 192.167.1.0 global cluster_interconnect
[oracle@ryoradb1 bin]$ ./oifcfg iflist -p
eth0 10.10.2.0 PRIVATE
eth1 192.167.1.0 UNKNOWN
My conclusion is the environment is configured correctly, in spite of the error generated by the Oracle Private Configuration Assistant.

I understand that you have installed 11.2.0.1 not 11.2.0.2 because multicating must be enabled if you have installed 11.2.0.2 and you may face these sort of problems because cluster nodes would not be able to communicate with each other.
Please check ocssd.log especially on the first node because this file will give more inforamtion as to why first node is not able to push GPnP file. As you have executed cluvfy to confirm the GPnP but to confirm whether GPnP profile is accurate to just narrow down the problem, I would suggest you to try to start cluster in exclusive mode so that you can sure that GPnP profile is good.
Shutdown CRS on all nodes, if there is any hung processes then kill them before executing the fllowing command to start cluster in exclusive mode.
$GRID_HOME/bin/crsctl start crs -excl
If you are able to start cluster in exclusive then it is sure that GPnP is correct and then next step would be to verify the private network.
See how you goes.
FYI, I was recently analyzing the same sort of problems where cluster was not able to access GPnP profile and finally I found issues on my private network. Customer had enabled IGMP snooping, which was avoiding multicast communication over the private network but it was 11.2.0.2, which is not the case here.
Harish Kumar
http://www.oraxperts.com

"Oracle Audit Vault Configuration Assistant" failed

Hello everyone, I can across this issue while installing AV agent and wanted to know if any one can help with a quick solution. OS= Linux 5, agent_software= 10.2.3 and here is the error messages:
++**INFO: Configuration assistant "Oracle Audit Vault Agent One-Off Patches" succeeded**++
++**INFO: Command = oracle.av.common.AvcaCfgPlugIn /app/oracle/product/10.2.0/agent_home/bin/avca -s initialize_agent -agentname agentdevmdb1 -agentusr ${s_agentusr} -agentport 7016 -av AHS-SOASOV1-DEVM.ahs.state.vt.us:1521:av.ahs.state.vt.us -rmiport 3121 -jmsport 3300**++
++**Command = oracle.av.common.AvcaCfgPlugIn has failed**++
++**INFO: Configuration assistant "Oracle Audit Vault Configuration Assistant" failed**++
++**-----------------------------------------------------------------------------**++
++***** Starting OUICA *****++
++**Oracle Home set to /app/oracle/product/10.2.0/agent_home**++
++**Configuration directory is set to /app/oracle/product/10.2.0/agent_home/cfgtoollogs. All xml files under the directory will be processed**++
++**INFO: The "/app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.**++
++**-----------------------------------------------------------------------------**++
++**INFO: Created a new file /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands**++
++**INFO: Since the option is to overwrite the existing /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands file, backing it up**++
++**INFO: The backed up file name is /app/oracle/product/10.2.0/agent_home/cfgtoollogs/configToolFailedCommands.bak**++
++**SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.**++
++**1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.**++
++**2. Fix the errors causing these failures.**++
++**3. Select the failed assistants and click the 'Retry' button to retry them.**++
++**INFO: User Selected: Yes/OK**++

Hi:
A log of everything the avca command is trying to do is kept in $ORACLE_HOME/av/log/avca.log. Please review that to see what could have caused the issue.

"Oracle Application Server Configuration Assistant" failed, installation...

I have problem to install SOA suite
Indeed it installs and when it come to complete configuration assistants it shows that one of my components failed.
i tried several times to uninstall/install the SOA suite and it failed in the same stage.
can some one give me some hints?
here is the log file enty:
Trying to check if config_order xml is present
The scratch path is =H:\temp\OraInstall2006-11-23_02-08-30AM
The config_order.xml is null
Lowering thread priority for config tool
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Application Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'F:\dev\oracle\OracleAS_10\jdk\bin\java -cp F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\ascontrol.jar;F:\dev\oracle\OracleAS_10\j2ee\home\applications\ascontrol\ascontrol\WEB-INF\lib\log4j-core.jar;F:\dev\oracle\OracleAS_10\jlib\oraclepki.jar;F:\dev\oracle\OracleAS_10\jlib\ojmisc.jar; oracle.sysman.ias.studio.installer.ASControlConfigAssistant -sso true -j2eeinstance home -username oc4jadmin -password *Protected value, not to be logged* -oraclehome F:\dev\oracle\OracleAS_10'
Start output from spawned process:
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
End output from spawned process.
Configuration assistant "Oracle Application Server Configuration Assistant" failed
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
Result code for launching of configuration assistant is: 1
The OUICA command is launched from F:\dev\oracle\OracleAS_10\oui\bin\ouica.bat.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to F:\dev\oracle\OracleAS_10
Configuration directory is set to F:\dev\oracle\OracleAS_10\cfgtoollogs. All xml files under the directory will be processed
-----------------------------------------------------------------------------please tell me what is Oracle Application Server Configuration Assistant and what effect it will have on my server.
thanks

Hi all,
I've found a solution to this problem. So far I've been trying the installation through MSTSC by taking administrative control (through /console option). Later, I tried my luck by installing it through Net Meeting which proved to be successful.
Hope you can try the same and ged rid of the installation issues.

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

ORACLE NOTIFICATION SERVER CONFIGURATION ASSISTANT(CLUSTERWARE)-FAIL

While Installing Oracle RAC Release 2 on Solaris 10 with NFS Mount, i am running into the following issue.
Step 1:
./root.sh
bash-3.00# ./root.sh
WARNING: directory '/opt/oracle/product/10.2.0' is not owned by root
WARNING: directory '/opt/oracle/product' is not owned by root
WARNING: directory '/opt/oracle' is not owned by root
chown: /data/media/RAC/voting/CSSVoteDisk0.dbf: Not owner
1
bash-3.00#
Step 2:
cd /opt/oracle/product/10.2.0/crs_1/cfgtoollogs
-bash-3.00$ ./configToolFailedCommands
PRIF-12: failed to initialize cluster support services
I believe the issue, here is location of ocr.loc file. I do not have ocr.loc file created yet.
$cat oifcfg.log
2007-05-10 13:37:48.612: [ COMMCRS][1]clsc_connect: (10043a620) NS err (12545, 12560), transport (515, 95, 0)
2007-05-10 13:37:48.614: [ OCROSD][1]utgdv:2:ocr loc file cannot be opened
2007-05-10 13:37:48.614: [ OCROSD][1]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
2007-05-10 13:37:48.615: [ OCRRAW][1]proprinit: Could not open raw device
2007-05-10 13:37:48.615: [ default][1]a_init:7!: Backend init unsuccessful : [33]
2007-05-10 13:37:48.615: [ CSSCLNT][1]clsssinit: error(33 ) in OCR initialization
Any Thoughts.
Thanks
-Prasad
Message was edited by:
pinjam
Message was edited by:
pinjam
Message was edited by:
pinjam

Just in case anyone finds this thread, the problem is that the NFS mount is not configured properly, and thus the root.sh script is failing almost straight away.
Ensure that the NFS server has the following options in /etc/dfs/dfstab (Solaris 10) to allow root access:
share -F nfs -o rw,root=orac1.domain.com:orac2.domain.com /oraclerac/crs_files
share -F nfs -o rw,root=orac1.domain.com:orac2.domain.com /oraclerac/oradata
You can find out if this is the problem simply by (as root) trying to chown a file anywhere on the NFS mount.
Output of the root.sh script should be more like this:
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/u01/crs/oracle/product' is not owned by root
WARNING: directory '/u01/crs/oracle' is not owned by root
WARNING: directory '/u01/crs' is not owned by root
WARNING: directory '/u01' is not owned by root
assigning default hostname rac1 for node 1.
assigning default hostname rac2 for node 2.
etc etc

Configuration assistant "Oracle Notification Server Configuration Assistan

Facing below issue on setup of RAC in vmware
Note: Do not run the scripts simultaneously on the listed nodes.
INFO: Starting to execute configuration assistants
INFO: Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons add_config rac1.localhost:6200 rac2.localhost:6200
Command = /u01/crs/oracle/product/10.2.0/crs/bin/racgons has failed
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/crs/oracle/product/10.2.0/crs
Configuration directory is set to /u01/crs/oracle/product/10.2.0/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/crs/oracle/product/10.2.0/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
any workaround pls
Regards,
Amin Anwar
Edited by: A. Anwar on Oct 17, 2012 2:24 AM

Hi,
best would be to take the actual version of Oracle (11gR2), which fixes a lot of bugs (also in installation), than to analyze problems based on old versions.
Even if you need older databases (10.2, which I don't hope since support is ending soon), you should at least think about taking the newest version for Oracle Clusterware (Grid infrastructure), .
Regards
Sebastian

CentOS 5.0에서 oracle 10g release 2를 인스톨 하는데. Configuration Assistants부분에서 정지

Oracle Universal Installer:Configuration Assistants
부분에서 Oracle Net Configuration Assistant 부분은 Succeeded 인데 그 다음 항목인
Oracle Database Configuration Assistants 부분은 In Progress..가 떠 있는 상태에서 더이상 진척이 없습니다.
중지버튼을 클릭하면 Process중이니 건들면 제대로 깔리지 않을 것이다 머 이런 메세지가 뜨고요
iSQL*PLUS Configuration Assistant 부분은 pending으로 표시되고요.
로그 파일의 가장 마지막 부분 일부를 보면 다음과 같이 되어 있으며 상태는 위에서 설명한 상태가 유지 되고 있습니다
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
/home/oracle/product/10.2.0/bin/lsnrctl start LISTENER
Listener Control complete.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = /home/oracle/product/10.2.0/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName ORCL -sid ORCL -sysPassword 05ecee51fc4ceaadcd857552a4bc0dbb9b -systemPassword 0595a357017438a8e27569f79180b8b27e -sysmanPassword 05f5483a0194b2043b8339887288dbf095 -dbsnmpPassword 05bbe54b01b4cf666c3f93d8e1195717ef -emConfiguration LOCAL -datafileJarLocation /home/oracle/product/10.2.0/assistants/dbca/templates -datafileDestination /DATA02/oradata -responseFile NO_VALUE -characterset KO16KSC5601 -obfuscatedPasswords true -sampleSchema true -oratabLocation /home/oracle/product/10.2.0/install/oratab -recoveryAreaDestination NO_VALUE
이렇게 되고 더 이상 진행이 되지 않습니다. 이유가 먼지 모르겠어요...... 다시 깔아도
마찬가지 현상이 일어 나더군요.. 방법이 없을까요...

dbca면 db생성시 생긴 문제인데 alertlog file을 확인해 보세요. 무슨 메세지가 있을 겁니다. 그리고. dbca돌아가다 생긴 문제니까 소프트 웨어는 잘 설치 된거구요.
db를 manual 로 만드시는것도 좋을 듯싶습니다.

Error running Enterprise Manager Configuration Assistant

Dear all, another problem.
I've installed a Oracle Enterprise Linux 5 in a machine with Oracle Database 10g R2. After the installation process I started to create a Oracle Database because I hadn't done this with the Oracle Server installation process. So, everything was going fine till almost the end of the creation, when I got a message showing it hadn't been possible to configure the Enterprise Manager due to the following error:
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Could not complete the configuration. Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
The message said I could do it using emca script later. I execute that script using
$ ./emca -config dbcontrol db
and I got the same error, as follows:
[oracle@treinamento bin]$ ./emca -config dbcontrol db
STARTED EMCA at Mar 25, 2009 12:53:41 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: mki
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Invalid username/password.
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /app/oracle/product/10.2.0/db_1
Database hostname ................ treinamento.yoshitec.sp
Listener port number ................ 1521
Database SID ................ mki
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: y
Mar 25, 2009 12:54:50 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log.
Mar 25, 2009 12:54:51 PM oracle.sysman.emcp.DatabaseChecks performReposChecks
WARNING: 'shared_pool_size' must be greater than or equal to 80 MB.
Mar 25, 2009 12:54:52 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Could not complete the configuration. Refer to the log file at /app/oracle/product/10.2.0/db_1/cfgtoollogs/emca/mki/emca_2009-03-25_12-53-41-PM.log for more details.
Does anybody know how I can fix it and run the emca? I've tryed some google searches but I didn't have any luck.
Thanks a lot.

Hi schavali
I'll try to explain better what's going on with this database Im configuring. So, I installed OEL 5 from the zero, in a new machine, to install Oracle DB Server 10g R2 later on. I did the first step and the second one, which were Install OEL 5 with the packages needed and Oracle Database Server 10g R2. After these installations I went to create a database (I called it mki with SID mki). OK? So, when everything was done, almost at the end of the database creation I got a message that Enterprise Manager failed because it wasnt possible to allocate ports in the specifics ranges for JMS RMI Database Control and Em Agent.
When I run netca I got a message saying the Listener could not be started because another software was using the port 1521.
I did what you suggested. Ignored the listener port and tryed to create manually those ports necessary to run emca.
In the terminal, I typed:
$. emca -config dbcontrol db -repos create -JMS_PORT 5540 -RMI_PORT 5520 -DBCONTROL_HTTP_PORT 5505 -AGENT_PORT 1830
So, the problem is, I didnt get to create any of those ports. I tryed every single port number that wasnt listed as free in /etc vi services and I could not go through. I tryed as a oracle user and with root as well. When I type a port that is not listed in the services, sometimes the error I get says that emca cannot create that port because is out of the range.
Following the procedure to OEL 5 installation, I read it's necessary to select all the packages neeed by Oracle DB 10g R2 and it's also necessary to leave all others unselected. I didnt do that, I installed almost all the packages listed there in the installation. Could be that the problem? That is, if I install OEL 5 again with just the packages needed by Oracle DB could I go through Oracle Enterprise Manager Configuration Assistant? It's just a doubt.
Thanks a lot for your attention

Installation Error During Configuration Assistants

Hello all.
I'm attempting to install Oracle SES on Windows XP. Beyond the Oracle® Secure Enterprise Search Installation Guide, I really don't know what I'm doing. The installation process runs fine until it gets to the Oracle Universal Installer: Configuration Assistants. Namely, the Oracle Database Configuration Assistant is the one causing problems. When it starts it doesn't make it very far before I'm assaulted with errors:
ORA-12638 Credential retrieval failed
Of which I can ignore or abort. If I ignore every one that pops up, the configuration assistant finished "successfully," but then I can't log in to the Administration Tool page. So I'm inclined to suspect that the configuration assistant wasn't successful at all. I've followed the installation guide and a tutorial and I'm rather clueless as to what I'm doing wrong (or what I'm failing to do). Any help would be greatly appreciated, thanks.

But when i use those url i'm getting error message and page not displayed
What errors are you getting?
Why I'm getting this message once the installation is successful. All the the three services are installed and starting properly without any error
So you're running on Windows? Do you have a fixed IP address? If not, did you install the Loopback Adapter as specified in the installation guide for Windows?
Also I have few doubts regarding installation, 1. Do i need to have Oracle Databse on my machine before the installation as it is not mentioned anywhere in the prerequisite. When I'm starting the midtier it gives me error while connecting to sqlplus for invalid userid/passowrd. Still the process goes through and midtier starts. Is that is a problem that my page is not displayed?
No, you don't need a database on the machine. SES installs its own internal database. It sounds like it's unable to start the database - possibly because of the NTS problem referred to above, or possibly because you don't have a Loopback Adapter installed.
+2. Does SES installs its own database while installation Or a client? Because i have not given any user id and password while installing then how does it tries to connect while starting the midtier.+
Yes, it installs its own database. The password for SYS, SYSTEM and EQSYS are set to the password you supplied during installation.
+3. If it does installs a internal database then how to access that database if we are not aware of the user id and password?+
See above. If you want to connect manually to the database (which shouldn't normally be necessary) you can use SYS AS SYSDBA, SYSTEM or EQSYS with the password you supplied. Note that unlike most default Oracle installations, you CANNOT connect using "sqlplus / as sysdba" - you should use "sqlplus sys as sysdba" to create a sysdba connection.

WF Configuration assistant Error (Table or view does not exist)

Hi
I'm trying to configure a fresh owf_mgr schema on my new 11gr2 database using configuration assistant 2.6.4.0.0.
The assistant connects but is not able to continue. The error is: java.sql.SQLException: ORA-00942: table or view does not exist.
I don't find anything useful in the log file though.
I previously did the same thing on a 11gr2 db and it went all nice and good.
Any ideas what table or view does the wizard mean?
Thank you in advance.

Hi
I'm trying to configure a fresh owf_mgr schema on my new 11gr2 database using configuration assistant 2.6.4.0.0.
The assistant connects but is not able to continue. The error is: java.sql.SQLException: ORA-00942: table or view does not exist.
I don't find anything useful in the log file though.
I previously did the same thing on a 11gr2 db and it went all nice and good.
Any ideas what table or view does the wizard mean?
Thank you in advance.

Content Services Configuration Assistant failde OCS 10.1.2

When it gets to the Oracle Content Services Configuration Assistant, this one fails. Seeing the log file in "home/oracle/product/10.1.2/ocs_1/apps/content/log/ContentMTConfig.log" the problem seems to be in the UploadWorkflowProcessDefinition:
*********************** Starting UploadWorkflowProcessDefinition ***********************
The command log is hidden for security reasons
Command returned an exit code of: 1
Command output:
wferr:
- WFLDRS_FAIL
- WFLDRSD_FAIL MODE=UPLOAD EFFDATE=<null>
- WFLDRSD_PROT_CUST NAME=WFSTD/AND ENTITY=ACTIVITY
Failed = oracle.ifs.utils.action.ActionFailedException: Oracle Workflow Definition Loader 2.6.3.5
wferr:
- WFLDRS_FAIL
- WFLDRSD_FAIL MODE=UPLOAD EFFDATE=<null>
- WFLDRSD_PROT_CUST NAME=WFSTD/AND ENTITY=ACTIVITY
at oracle.ifs.admin.actions.OsCommandAction.processFinished(OsCommandAction.java:135)
at oracle.ifs.admin.actions.ForkProcessAction.perform(ForkProcessAction.java:187)
at oracle.ifs.utils.action.ActionQueue.performActions(ActionQueue.java:303)
at oracle.ifs.utils.action.ActionQueue.run(ActionQueue.java:229)
at java.lang.Thread.run(Thread.java:534)
recording that configuration failed
saving:/home/oracle/product/10.1.2/ocs_1/apps/content/settings/oracle/ifs/utils/common/Settings.properties
iFS configuration failed; the following error occurred:
Exception traces ---->
oracle.ifs.utils.action.ActionFailedException: oracle.ifs.utils.action.ActionFailedException: Oracle Workflow Definition Loader 2.6.3.5
Can someone help me.
Thanks

hi all,
i've solved the problem by cleanly remove .profile under oracle login directory. not sure whether OUI refers this file during installation. in the new installation, i also use two UNIX users, one for infra tier, another for apps tier. this time, there is no single error reported.
thanks for your attention.
Rgds/

Problem using template in database configuration assistant Oracle 10g

Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
Thanks

Error:     ORA-9314
Text:     sltln: error translating logical name
Cause:     Internal buffer may have overflowed
Action:     See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil

Security problem in oracle 9i Database Configuration Assistant

Inside the tool Oracle 9i Database Configuration Assistant there is an option by which you can make a "copy" of your Database. This "copy" is called a template and you don4t need any password or aunthentication to do it, you just need the tool to be installed in your server. Once you have a template, you can bring it anywhere and recreate the original database (including data). Again, you don't need any password or aunthentication to do it, further more, in the last step of this process you can change the password of any user (inluding SYS, SYSTEM or another DBA user). The thing about this is that anyone with access to the computer where the database is can make a template of it, take this template to another computer and recreate my database having FULL access to it (structure, data, code ...). And everything without needing any password!!!. I really thing that it is a big problem. Is there any way of preventing this operation?. How can I safely protect my database?. I thought about unistalling the product, but someone can re-install it and everything would be the same. Can someone give me an answer?
Thanks for everything.
Pablo Cuenca

You must protect your database from casual browsing at the OS level. This is not a security hole, per se, since this is a known issue with any and all software. Database Configuration Assistant is not needed for this since one may copy the database without it.

Database Configuration Assistant fails during instalation of Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

Database Configuration Assistant fails during installation Oracle EE 8.1.7

My machine runs RH 6.2 and I have tried to install it Oracle. After executing all pre-instalation steps, I run ./runInstall and instalation process goes on. I select Typical Instalation and instalation proceeds until 100%, when OUI tries to configure Net 8 Assistant and Database Configuration Assistant. Both applications fail in this phase. Unfortunately, OUI shows a message (for Database Configuration Assistant) informing that /u01/.../JRE/bin/jre does not exist. However, I have installed JDK 118 and JRE link seems correct, so that I can access JDK directory throught JRE link.
HELP, HELP!!!
Cheers,
Andre

some good installation guides to check out:
http://www.akadia.com/services/ora_linux_install_901.html
http://www.e-gineer.com/instructions/install-oracle9i-on-linux.phtml
good luck!
Jenny

Oracle Database - Database Configuration Assistant

Similar Messages

Maybe you are looking for