Oracle database installation in solaris using RAC

hai everyone
i want to install in my pc RAC configuration in solaris install database oracle 10g.
i want proper document step by step.
help me
deendba

PC and solaris? How do you plan to perform this task? by means of virtual machines? Please specify. In the mean time you may want to check the install RAC documentation for solaris.
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for Solaris Operating System
Part Number B14205-07
~ Madrid.

Similar Messages

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions.

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

Oracle 11g Installation on SOlaris 5.10

Hi ,
First i am going to install oracle 11g on solaris 5.10 . Could some one tell me what are the requirements required if not please send me the better link which i can follow for my installation ...

Follow the Oracle Installation Documentations.
"Oracle® Database Quick Installation Guide
11g Release 1 (11.1) for Solaris Operating System"
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313.pdf
Oracle® Database Installation Guide
11g Release 1 (11.1) for Solaris Operating System
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068.pdf
Regards,
Sabdar Syed.

What users are created during Oracle Database installation?

By default, what users are created during Oracle Database installation?
Thanks,
Felipe

Hi,
All databases created by the Database Configuration Assistant (DBCA) include the SYS, SYSTEM, SYSMAN, and DBSNMP database accounts. In addition, Oracle provides several other administrative accounts. Before using these other accounts, you must unlock them and reset their passwords.
Here you are:
USERNAME
MGMT_VIEW
SYS
SYSTEM
DBSNMP
SYSMAN
SATYAM
OUTLN
MDSYS
ORDSYS
EXFSYS
DMSYS
USERNAME
WMSYS
CTXSYS
ANONYMOUS
XDB
ORDPLUGINS
SI_INFORMTN_SCHEMA
OLAPSYS
SCOTT
TSMSYS
BI
PM
USERNAME
MDDATA
IX
SH
DIP
OE
HR
Regards,
Satyam

ERROR install oracle database 10gR2 in solaris sparc 64

Dear All,
I got error when installing oracle database 10gR2 on solaris sparc 64.
these are the messages:
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
/usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
.0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
/10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
-lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
/opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
any help would be appreciate.
Thank you
Regards,
Spirit

I'm not sure with the solaris sparc 64.
but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
http://forums.oracle.com/forums/thread.jspa?messageID=1254866
probably it will help you.
sorry, this is just my guessing of your problem.
thanks

Database installation gets fail in RAC

Hello All,
I'm configuring Oracle 11gR2 RAC2 node server over RHEL5.5 on Oracle VM box.
I configured Clusterware but when I'm installing Oracle Database using DBCA utility it throws the following error as
"ORA-00119: invalid specification for system parameter REMOTE_LISTENER
ORA-00132: syntax error or unresolved network name 'rac-scan.xxx.com:1521"
Few months back, I had configured 11gR2 RAC2 node server without having any error, but this time I wanted to configure the same on different machine then I'm getting the above mentioned error.
Following are the cluster services for your references.
[root@rac1 bin]# ./crsctl check cluster -all
rac1:
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
rac2:
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[root@rac1 bin]# ./crsctl stat res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.LISTENER.lsnr
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.asm
ONLINE ONLINE rac1 Started
ONLINE ONLINE rac2 Started
ora.gsd
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.net1.network
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.ons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.registry.acfs
ONLINE ONLINE rac1
ONLINE ONLINE rac2
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac1
ora.cvu
1 ONLINE ONLINE rac2
ora.oc4j
1 ONLINE ONLINE rac2
ora.rac1.vip
1 ONLINE ONLINE rac1
ora.rac2.vip
1 ONLINE ONLINE rac2
ora.scan1.vip
1 ONLINE ONLINE rac1
[root@rac2 bin]# ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE rac2 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE rac2
ora.crf
1 ONLINE OFFLINE
ora.crsd
1 ONLINE ONLINE rac2
ora.cssd
1 ONLINE ONLINE rac2
ora.cssdmonitor
1 ONLINE ONLINE rac2
ora.ctssd
1 ONLINE ONLINE rac2 ACTIVE:0
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE rac2
ora.evmd
1 ONLINE ONLINE rac2
ora.gipcd
1 ONLINE ONLINE rac2
ora.gpnpd
1 ONLINE ONLINE rac2
ora.mdnsd
1 ONLINE ONLINE rac2
[root@rac2 bin]# ./crsctl stat res -t
NAME TARGET STATE SERVER STATE_DETAILS
Local Resources
ora.DATA.dg
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.LISTENER.lsnr
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.asm
ONLINE ONLINE rac1 Started
ONLINE ONLINE rac2 Started
ora.gsd
OFFLINE OFFLINE rac1
OFFLINE OFFLINE rac2
ora.net1.network
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.ons
ONLINE ONLINE rac1
ONLINE ONLINE rac2
ora.registry.acfs
ONLINE ONLINE rac1
ONLINE ONLINE rac2
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE rac1
ora.cvu
1 ONLINE ONLINE rac2
ora.oc4j
1 ONLINE ONLINE rac2
ora.rac1.vip
1 ONLINE ONLINE rac1
ora.rac2.vip
1 ONLINE ONLINE rac2
ora.scan1.vip
1 ONLINE ONLINE rac1
[root@rac2 bin]#
Plz help me out of this.
Thanks !!!
rohit
http://dbarohit.blogspot.in/

Kindly verify that the clusterware installation has been done successfully with the following verification utility:
cluvfy stage -post crsinst -n rac1,rac2 -verbose.
If the output contains any error, try fixing it first.
And you can use SCAN ip in /etc/hosts only if you are using 11.2.0.1 Grid software. But if you are using the later version, you have to define the DNS entry.

Oracle Database 11g Backup Deduplication using CommVault

Hi Everyone
We have recently implemented Commvault solution for a Backup and Recovery of Oracle database and other IT softwares / fileservers. Oracle E-business suite 12.1.1 is implemented in our organization with 11g database 11.2.0.3.6, for all the backups we have enabled deduplication and it is giving more then 90& dedup on all softwares except for Oracle database, for oracle it is giving just 40% or max 50% which is not acceptable to our organization
Production DB sizee = 257 GB
Used block = 157 GB
Backup Policy = Daily Full backup incremental 0 with commvault dedup enabled
Deduplication % = 40 to 50 %
requiement = should be over 90%
Our database is small and there are around 6 to 7 GB of archives daily so the data is not changing much, commvault support is saying that the block signatures are changing due to this we are not getting the full deduplication and they are asking us to check what changes are made during the day and oracle support says that once the rman backup is completed it has nothing to do with the third party dedup, and we are stuck so i thought to put it in the forum and may be oracle gurus can help find a solution here, my questions are:
1. Is there a non issue of not getting fully deduplication of Oracle database using third party deduplication solutions? Is there any one who have used oracle backups with Commvault and dedup enabled, any help would be great
2. I also need to know how to check what changes are made in database on a daily basis.
Please help
Thank you
Regards
shahrukh

The instructions are the same, where the server is physical or virtual. Best bet is the docs at http://docs.oracle.com/database/121/RILIN/toc.htm
This may also be useful - RAC Attack - Oracle Cluster Database at Home - Wikibooks, open books for an open world

Default port of Oracle 9i Database --- Oracle database installation

Hi,
I am new to oracle..searched across internet to know this particular detail of Oracle 9i database installation.
My query being..Can Oracle database be installed in a way to use port's other than 1521. When do we go for making use of a port other than 1521. What are the risk's and benifit's.
How to make use of a port other than 1521 while making use of OUI(oracle universal installer) to install a 9i database on windows OS.
Can someone provide an answer to my queries/ some link where I can find the answer.
Thanks,
R S

you have to change the port no in listener.ora file which exists on Oracle_home/network/admin/listener.ora like
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1521))
)from this to
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = Griat-xp.bebo.tech.com)(PORT = 1522))
)afterwords you have to reload the listener by using lsnrctl on command prompt
in this way you can change the default port of Oracle
Regards
Singh

Oracle 10g installation is hanging in RAC setup..

Hi,
I installed 10 clusterware succesfully(10.2.0.1) in linux 4AS. CRS is running successfully in two nodes. i set kernel parmeters and installed require package also.When i am try to install oracle 10g database software(10.2.0.1), it is going fine 24% after that it is hanging.installation progress bar is showing 24%
Thanks,

Hi,
Please find the installAction log file and installAction Error file,
installActions2009-03-15_08-30-35PM.log
SSL Required Support Files for InstantClient 10.2.0.1.0
regexp 2.1.9.0.0
Bali Share 1.1.18.0.0
Oracle Universal Installer 10.2.0.1.0
Oracle One-Off Patch Installer 10.2.0.1.0
Installer SDK Component 10.2.0.1.0
Java Runtime Environment 1.4.2.8.0
Sun JDK 1.4.2.0.8
Sun JDK extensions 10.1.2.0.0
INFO: Method 'dispose()' Not implemented in class 'oracle.sysman.oii.oiif.oiifp.OiifpWizIntroPanel'
INFO: Method 'dispose()' Not implemented in class 'OiSuperAdminPasswd'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: FASTCOPYRAC : Oracle Home < /u01/app/oracle/product/10.2.0/db_1 >is shared. Instantiating RAC files
INFO: HomeSetup JRE files in Scratch :590
INFO: Setting variable 'ROOTSH_LOCATION' to '/u01/app/oracle/product/10.2.0/db_1/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/u01/app/oracle/product/10.2.0/db_1/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
oraInstall2009-03-15_08-30-35PM.err
java.util.zip.ZipException: too many length or distance symbols
     at java.util.zip.InflaterInputStream.read(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1420)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)
Thanks,

Oracle BPEL Installation in Solaris

Hi all,
Can anybody give some tips on how to install the Oracle BPEL in a Solaris environment. i did the oracle BPEL 10.1.2 installation in windows machine and did a POC.Now i want to replicate the same setup in a solaris environment and do a performance testing.
In Windows it was quite easy cince we get a Olite DB along with the BPM installation,but in solaris i am sure we need to do a seperate DB configuration.
Do i need to use the Repository creation agent to do that or can i use the scripts which i downloaded from the oracle BPM download page?
which one should i install
* the Oracle BPEL Process Manager for Oracle AS middle Tier?
or
*BPEL process manager for developers
Please let me know if i need to do any special work arounds for completing the installation.
Your response is highly appreciated.
Thanks & Regards
Subbu

Hi,
you have to install
* the Oracle BPEL Process Manager for Oracle AS middle Tier
Please take a look at the installation guide. You need a Oracle DB to run BPEL in production environment....

DTrace probes for oracle database 10g in solaris 10

Hi guys,since a mounth i`ve learnt about solaris DTrace and its D scripts and tried to look for probes for administrating oracle database but til now,nothing!so my question,does there DTrace probes for oracle application ?i really need it now,that`s my project:tracing oracle with DTrace in solaris 10 SPARC!anyone can help me pleaaase!!!

Hey!!of course that's a great site but U know,i've already visit it and it doesn't talk about probes for oracle!!howeiver i thought about another option,how do u think about exploiting oracle instance...i mean,do u think it's possible to monitoring oracle processes (LWGR,PMON,DBWR,SMON,...) with DTrace by using providers?like fbt or io,i don't know much!!remember,the aim is monitoring oracle database performance !!
regards!

Migrate hundreds of Oracle databases to RHEL/Windows using DP/TTS/Shareplex

Am working on devising a migration strategy for several Oracle databases from one physical data-center location to another data-center location through dedicated WAN links. Overall snapshot:
Total 365 Dbs (28 to Oracle RAC 11gR2 and approx. 300 to DataGuard and Standalone). Source Databases versions are Oracle 9.2.0.4/9.2.0.7/10.2/10.2.0.4/11.2/11.2.0.4.
Source Databases are currently on different versions of Linux/HPUX/AIX/Windows OS. Target Database OS platform(most of them): RHEL 5.8/RHEL 6(atleast for Unix) and Windows. Plan is to migrate same versions and not upgrade(due to applications dependency). am thinking of using
-Oracle Datapump
-Transportable Tablespaces+RMAN scripting(for target datafiles)
-Shareplex for Databases in TB (this tool allows ZDT, zero-downtime migration/from Quest software)
Also my Storage/SAN colleague is using Swing gear (AUTO-LUN+BC) to migrate virtualizing the storage arrays from Source to Target location. Is it possible to "piggyback" on this SAN-level migration of the "physical" datafiles and then use Shareplex to migrate the archivelogs and apply them over to Target databases?
Need your inputs please. Thanks in advance..
Abhijit

Abhijit,
If you haven't had any feedback yet then the best option is to ask this question in the Database forum -
Forum: Database - General
General Database Discussions
This forum is for migratiing from non-Oracle to Oracle databases and they will be better able to help moving Oracle from one machine to another.
Regards,
Mike

How do you remove previous Oracle Database installations from your registry

HI,
I am trying to reinstall Oracle 9i and Oracle 9i developer on windows XP home and i have used the OUI to uninstall both programs. I tried re-installing the database and Oracle universal Installer gave me a message indicating i have 2 previous databases. Besides taking a different Oracle Home and removing the Oracle folder on the hard disk, how can i remove the Oracle Entries in the registry so that the computer is free of Oracle?
Thanks

if u reinstall oracle and before that u have to delete the oracle related previous installation information from your registry.for that go to registry and open
1)hkey_local_machine-software-in that delete oracle folder
2)hkey_local_machine-system-controlset001-in that delete the old database service information,listener info._lo
3)hkey_local_machine-system-controlset002-in that also delete the old database service,listener information.
bye.

Oracle Database Web Service Client using UTL_DBWS :: ORA-29532 Error

Hi,
I have the Oracle Database 10.2.0.1.0 :-
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionI have written a simple Web Services Client using the classes gfrom the UTL_DBWS package. I loaded the JAR file dbwsclient.jar in the SYS Schema and I am trying to use it in the USF Schema.
However, I have hit this error & I ma unable to proceed :-
SQL> select get_stock_price from dual;
select get_stock_price from dual
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IllegalAccessException: javax.xml.rpc.ServiceException:
java.security.AccessControlException: the Permission
(java.lang.RuntimePermission getClassLoader) has not been granted to USF. The
PL/SQL to grant this is dbms_java.grant_permission( 'USF',
'SYS:java.lang.RuntimePermission', 'getClassLoader', '' )
ORA-06512: at "USF.UTL_DBWS", line 193
ORA-06512: at "USF.UTL_DBWS", line 190
ORA-06512: at "USF.GET_STOCK_PRICE", line 17Can you please help me with this ?
Regards,
Sandeep

Hi,
The error message said
the Permission(java.lang.RuntimePermission getClassLoader) has not been granted to USF.
I'd follow the suggestion
The PL/SQL to grant this is dbms_java.grant_permission( 'USF','SYS:java.lang.RuntimePermission', 'getClassLoader', '' )
In case you have not done so, consult the Callout Users Guide @
http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
Kuassi http://db360.blogspot.com

Oracle database installation in solaris using RAC

Similar Messages

Maybe you are looking for