Oracle Forms on IBM Web Sphere Application Server  and BEA Application Serv

Hi,
Can we run Oracle Forms on top of IBM web phere or Bea application servers?..
If possible, please give the steps that we need to follow to make it run on them

I've seen this asked before and the general repsonse was : don't do it , it's not worth the hassle. Apart from anything else you'll still have to pay the license fees for the Oracle Application server ....

Similar Messages

  • How to run others application in Oracle Forms on the web version?

    How to run others application in Oracle Forms on the web version?

    Pang,
    guess that you want to start client side programs from Forms on the Web. There is a sample on OTN (host bean) that allow you to acces sthe client and start executables.
    Frank

  • Oracle forms to j2ee/web application

    Hello all,
    I need help with converting "oracle forms" to j2ee/web application. There are only 2-3 forms. But I needed to know how to do it from scratch. I looked at some softwares available to do it. But its costly.
    Basically the company I am working with, needed all the forms online, so that they can access it using a browser. As part of the development, I am using jdeveloper 10g.
    could some help me out
    Thanks a lot
    san

    Well if you need your Forms accesible from a browser you don't need to convert them to Java - you just use Forms on the Web - http://otn.oracle.com/formsupgrade
    If you still want to convert to Java have a look at the Forms page for more info:
    http://otn.oracle.com/products/forms
    and also here:
    http://www.oracle.com/technology/products/jdev/collateral/4gl/formsdesignerj2ee.html

  • Deploying applications developed using Jdeveloper in IBM Web Sphere

    Hi
    I want to deploy the applications developed using jdeveloper on IBM Web Sphere. Pl suggest me the procedure
    Thanks
    Satya

    Refer
    Websphere 5.1 and ADF/UIX
    Websphere 5.1 and ADF/UIX

  • COnfiguring oracle JDBC Driver with Web Sphere

    I have oracle 7.3.4(on Solaris) and IBM Web Sphere standard
    Edition 2.03 (on NT) I want connect to Oracle ina Servlet. Can
    any one help in configuring Oracle JDBC driver in Web
    Sphere?
    Thanks very much
    Tom
    null

    I have oracle 7.3.4(on Solaris) and IBM Web Sphere standard
    Edition 2.03 (on NT) I want connect to Oracle ina Servlet. Can
    any one help in configuring Oracle JDBC driver in Web
    Sphere?
    Thanks very much
    Tom
    null

  • Replication between Oracle Server and MS SQL Server

    Hello,
    Does anybody know of a well known or reliable software that can do data replication between Oracle Server and Microsoft SQL server.
    I suppose I can write my own version using Heterogenous Services in Oracle but I would like to know if such an automated replication between Oracle and SQL is available commercially.
    Thank you.

    Viacheslav Ostapenko wrote:
    Sorry, Aman,
    I couldn't find any info about replication to MS SQL. Is it possible at all? Could you provide link where we can read about this? It could be very interesting.Sorry Viacheslav, even I couldn't find anything for the same. I am not sure that it can be done or not, I haven't heard anyone in my contact doing so. The only place where I have seen Streams being used around me is within Oracle db only. May be someone else can help if he/she has done it.
    Aman....

  • Can you access applications through BEA Portal Server and run applications on different BEA Application Server?

    Is it possible to use common Corporate BEA Portal server and able to run different Business Unit applications on different BEA Application Servers?

    Hi Akula,
    You may want to read this article:
    http://dev2dev.bea.com/products/wlportal81/articles/wsrp.jsp
    It maybe related to what you want.
    Regards,
    --alex
    Akula Venkata <[email protected]> wrote:
    Is it possible to use common Corporate BEA Portal server and able to
    run different Business Unit applications on different BEA Application
    Servers?

  • Install both Sun Application server and Jboss application server- Can I?

    Dear all,
    I am programmer and want to test for something.
    Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?
    Is there any special attention I need to take?

    I am programmer and want to test for something.Allowed.
    Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?Why do you think it may not be possible ?
    Is there any special attention I need to take?just the way the URL is populated.

  • Calendar server and address book server login fails with outlook connector

    Hi all,
    I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
    When i deploy the connector i get the pop ups saying "Server:servername:3080
    Error:service not available" also
    "Server:servername:80/uwc"
    Error:service not available"
    asking to login to calendar server and address book server.Clicking "OK" allows install.
    In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
    Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
    Regards,
    lmeenakshy

    Hi,
    When i deploy the connector i get the pop ups saying
    "Server:servername:3080
    Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
    I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
    "Server:servername:80/uwc"
    Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
    asking to login to calendar server and address book
    server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
    In outlook i can send and receive mails but not the
    meeting requests.It gives the error "login to
    calendar server" when i create a meeting request.
    Please let me know what i have to do to get rid of
    the error.The username and passwd entered is
    correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
    Regards,
    Shane.

  • How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster) with scrpiting

    I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
    single Windows Server Failover Cluster (WSFC) that spans two data centers.
    If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
    I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
    If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
    Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

    You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically.  Is that not working?
    You also might want to run this configuration by some SQL experts.  I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
    the database from some form of shared storage.  Then it looks like you are trying to implement Always On to the DR site.  I'm not sure you can mix both types of failover in a single configuration.
    FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
    . : | : . : | : . tim

  • Mobile repository server and mobile development server

    Hi,
    We are implementing Mobile applications,. Can we install Mobile repository server and mobile development server in same server?
    Or do we have two sepearate servers for both?
    What are thye prerequisites for to install this two ?
    Any idea.
    Thanks
    Lisa

    Firstly ensure you have correct authorisation. Refer to SAP Note 1037574.
    It should be found here...
    http://service.sap.com
      > SAP Support Portal
      > Click on the tab "Downloads"
      > Select the drop down arrow called "Download"
      > From the list select the dropdown arrow "Installations and
        Upgrades"
      > Click on "Entry by Application Group"
      > Now in the main screen click on "SAP Application Components"
      > Select "SAP CRM" from the drop down list.
      > Now click on "SAP CRM 2007"
      > Click on "Installation and Upgrade"
    Rgds, Gervase

  • What is Max MT server and min MT serve

    Hi All,
    What is Max MT server and Min MT server means in Siebel?
    Why we need to use this.?
    Please give me some idea on this
    Regards
    Tusar

    Here's an excerpt:
    Our basic recommendation is to have 20 tasks per MT Server. (An MT (Multi-Threaded) Server is equivalent to an operating system process.)
    Consider the projected number of concurrent users for the application in the design phase of the implementation. Even though there may be a large number of potential users, a smaller number will be logged in at any given time. For purposes of the following discussion, assume that there are 100-200 concurrent users.
    There are many variables to consider when tuning an Object Manager. This tuning should be reviewed with Siebel Expert Services as part of the Production Readiness review. Here are some variables to consider.
    The number of concurrent users.
    The length of time each user spends on the system during a session.
    Session timeout.
    Use of scripts.
    Complexity of the application.
    High usage times. (80% of users are online from 11:00 to 3:00)
    The settings used for this Siebel Object Manager component are as follows:
    Maximum Tasks = 300
    Maximum MT Servers = 15
    Minimum MT Servers = 5
    Maximum Tasks represents the total number of concurrent users. Since the anticipated number of concurrent users is between 100-200 the setting has been set to allow for some extra breathing room. This is important to allow for sessions that do not log out properly and therefore hang around until the session timeout is reached. Session timeout can be set in the Webserver and is usually defaulted to 20 minutes.
    Maximum MT Servers is the total number of processes that can be run for this component. It is also used to calculate how many tasks can be run on each process. The calculation is as follows:
    Maximum Tasks / Maximum MT Servers = Number of tasks per MT Server
    300 / 15 = 20
    As mentioned before, our basic recommendation is that the ratio of Maximum Tasks to Maximum MT Servers be 20. An extensively configured or scripted application may require a lower ratio.
    Minimum MT Servers is only used when the Siebel Server or the Component is started. This determines how many processes to startup for this component. The only benefit that this provides is that it reduces the initialization time of the process when a new MT Server is needed. In this example, 5 MT Servers were used because 100 users are anticipated. This way the system can handle 100 concurrent users before having to startup a new process.

  • How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)

    I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
    single Windows Server Failover Cluster (WSFC) that spans two data centers.
    If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
    I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
    If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
    Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

    please post you question on failover clusters in the cluster forum.  THey will explain how this works and point you at scipts.
    You should also look in the Gallery for cluster management scripts.
    ¯\_(ツ)_/¯

  • I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial

    I set up Raid on my Mac Mini Server and lost my Server software. It is not listed in my "purchased" apps. How can I get it w/o having to purchase it? Will my serial # be enough to show it is a mini server and under warrantee be enough to get it back?

    If it's not listed in Purchases, check that it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 After that, go to Purchases and download OS X Server.
    If you can't download it, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact

  • HT2693 i am downloading a software update, but at the last moment before it finishes, it says in order to continue, please close the following application: safari, and the application is closed, what do they mean, and what should i do?

    i am downloading a software update, but at the last moment before it finishes, it says in order to continue, please close the following application: safari, and the application is closed, what do they mean, and what should i do?

    You should close safari.

Maybe you are looking for