Oracle GL error during journal import- ICM DOWN

Hi all,
I hit an error regarding the Concurrent Manager - Oracle GL during the journal import from GL_INTERFACE table. I've already populate the table with a set of dummy values. i've run the journal import to import the value from the table. i've clicked on correct and search for the Journal Import Data, but Oracle Application prompted me an error - FRM-40350: Query caused no record to retrieve, So i view the request, each and every of the request ID's phase is "Pending" with its status as "Stand by". I checked on the diagnostics and the error code was as following
CONC-DG-INACTIVE ICM DOWN
This request may have to wait on one or more of the following requests to complete before it can begin execution:
i have 2 doubts.firstly i was thinking could it be that i couldnt search for the Journal Import data at Journal: import - Correct was due to the Concurrent manager was down, thus prompting error FRM-40350? please advise. Secondly is that does CONC-DG-INACTIVE ICM DOWN suggest me to startup the concurrent management script? please advise
thanks in advance
Larry
user572825

that i couldnt search for the Journal Import data at Journal: import - Correct was >due to the Concurrent manager was down, thus prompting error FRM-40350?no i dont think so
>please advise. Secondly is that does CONC-DG-INACTIVE ICM DOWN suggest >me to startup the concurrent management script?
check fisrt if there is any runing request and wait till finish if there no runing requeste try to restart the CM if that didnot solve you issue run the CMclean.sql script then restart the CM
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

Similar Messages

Error during export & import of rules in RAR 5.2

Hi all,
We followed the steps mentioned in exporting & importing the rules as per the Config guide. But we
are receiving the below error during the import of rules. Can anybody please throw a limelight on why this error message is appearing?
"Error in Table Data ==> VIRSA_CC_CRPROF
SQL==>Insert into VIRSA_CC_CRPROF(VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS)Values(??????)
Record==>D VIRSA_CC_CRPROF null"
We also ensured that the downloaded file is not truncated and saved it in a separate folder. Does the file needs to saved in ANSI or Unicode text? We saved in ANSI
Also the background ground job is not getting scheduled automatically during the import of ruels. Is that due to the above error?
Thanks and Best Regards,
Srihari.K

Hello Sri,
background job for generating the rules won`t be scheduled before you upload the file successfully.
The most obvious reason for this error message is that you have line in your file - in table VIRSA_CC_CRPROF that is corrupted. Make sure all lines from table VIRSA_CC_CRPROF have all predefined fields - (VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS).
If you keep hiting this problem just delete this table, after the upload you`ll add the critical profiles manually - I bet you don`t have many of them.
Also from my experience I always choose to save the downloaded file in UNICODE UTF-8 format.
Once the file is saved in other format, there`s no use of it, download it again and save directly in Unicode.
Make sure you don`t have empty fields, even in the fields where you don`t have values, you must leave space, otherwise you`ll keep hitting the same issue.
Regards,
Iliya

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3

I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

Errors during Unicode Import

Hello,
I am getting errors during Import of Unicode Conversion. AABLG is a Cluster Table.
/usr/sap/P01/SYS/exe/run//R3load: START OF LOG: 20110110220222
/usr/sap/P01/SYS/exe/run//R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/P01/SYS/exe/run//R3load: version R7.01/V1.4 [UNICODE]
Compiled Jun 19 2010 01:48:51
/usr/sap/P01/SYS/exe/run//R3load -ctf I /disk2/ABAP/DATA/SAPCLUST_1.STR /disk4/instdir/DDLORA.TPL SAPCLUST_1.TSK ORA -l SAPCLUST_1.log
/usr/sap/P01/SYS/exe/run//R3load: job completed
/usr/sap/P01/SYS/exe/run//R3load: END OF LOG: 20110110220222
/usr/sap/P01/SYS/exe/run//R3load: START OF LOG: 20110111135853
/usr/sap/P01/SYS/exe/run//R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/P01/SYS/exe/run//R3load: version R7.01/V1.4 [UNICODE]
Compiled Jun 19 2010 01:48:51
/usr/sap/P01/SYS/exe/run//R3load -i SAPCLUST_1.cmd -dbcodepage 1100 -l SAPCLUST_1.log
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(CNV) WARN: you set dbcodepage '1100' but platform requires '4102'.
(CNV) WARN: dbcodepage rectified to required value.
(GSI) INFO: dbname   = "P0120110110060126                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecctemp                                                         "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "ecctemp"
(GSI) INFO: release = "B.11.31"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: AABLG created #20110111135853
myCluster (63.25.Imp): 679: error when retrieving table description for physical table AABLG.
myCluster (63.25.Imp): 682: return code received from nametab is 2
myCluster (63.25.Imp): 302: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: data conversion failed. rc = 2
(DB) INFO: AABLG~0 created #20110111135854

Hello,
you need to ensure that the Unicode conversion is done during export (target code page 4102 or 4103).
This error typically occurs if the export does not include the Unicode conversion (simple system copy with Non-Unicode).
Best regards,
Nils Buerckel
Globalization Services
SAP AG

Automatic TAX in GL During Journal Import

Need a solution for the following.
Need to integrate Payroll data from a legacy system to General Ledger. GL Interface and Journal Import feature is being used. The Journal Lines will carry the TAX code and will have to automatically create the TAX lines in the Journal after import.
There is an option to automate TAX line generation during Manual Journal Entry by setting the TAX Required field in the Journal Header to 'Required' and supplying a Tax Code in the Line. However, on inspecting the GL INTERFACE tables for journal import there is no provision to set the Tax Required field to Required in the GL_INTERFACE table ( no column exists ).
Does anybody if Oracle GL supports the Automatic Tax calculation option for imported journals. Is the feature only available for Manual Journal Entry ?
Any workarounds possible to use the standard GL functionality for imported journals as well.

As I know, Calculate tax feature works only if you are entering manual journal entries from screen (not tried using ADI) (this is for customers who do not have any other modules others than GL and you are using manual entries).
I am aware of this functionality.If you are coming from the gl_interface, I guess, oracle assumes that you are already calculating the tax in the source system and importing the tax entries.
Journal Import on GL_INTERFACE does not support this feature.
But if you want to calculate the tax using the gl_interface, there are ways to do that. You can make use of the gl_import_hook_pkg.post_module_hook. This is called at the end of the Jounal Import program. This takes batch_ids in that are being created in the journal import. You can create a package that takes these batch_ids in and calculates tax using gl_calculate_tax_pkg.calculate_tax. This creates additional journal lines for you at the tax rate with the tax account that is setup. This involves some updates to gl_je_batches, gl_je_headers, gl_je_lines, but works. Let me know if you need more details.
Thanks
Nagamohan

SRM Installation error during abap import

Hi SAP Gurus,
This is the error during the ABAP Import.
>>>Import_Monitor.log
INFO: 2007-10-07 14:25:17
Import Monitor is started.
CONFIG: 2007-10-07 14:25:17
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP1;C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP2;C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3
installDir=C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-10-07 14:25:17
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-10-07 14:25:17
List of packages with views: 'SAPVIEW'.
TRACE: 2007-10-07 14:25:17 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2007-10-07 14:25:17 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-10-07 14:25:18
Data codepage 1100 is determined using TOC file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2007-10-07 14:25:18
Version table 'SVERS' is found in STR file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-10-07 14:25:18
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-10-07 14:25:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-10-07 14:25:18 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDIC.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSDIC.TSK ORA -l SAPSDIC.log
TRACE: 2007-10-07 14:25:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -stop_on_error
INFO: 2007-10-07 14:28:04 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is successfully completed.
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP1\DATA\SAPSSEXC.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSSEXC.TSK ORA -l SAPSSEXC.log
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL1' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP2\DATA\SAPAPPL1.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL1.TSK ORA -l SAPAPPL1.log
TRACE: 2007-10-07 14:28:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL0' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP2\DATA\SAPAPPL0.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL0.TSK ORA -l SAPAPPL0.log
TRACE: 2007-10-07 14:28:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
TRACE: 2007-10-07 14:28:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error
TRACE: 2007-10-07 14:28:19 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
INFO: 2007-10-07 14:38:56 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is successfully completed.
TRACE: 2007-10-07 14:39:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2007-10-07 14:39:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL2' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP2\DATA\SAPAPPL2.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL2.TSK ORA -l SAPAPPL2.log
TRACE: 2007-10-07 14:39:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
INFO: 2007-10-07 14:40:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
TRACE: 2007-10-07 14:40:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2007-10-07 14:40:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSRC' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSSRC.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSSRC.TSK ORA -l SAPSSRC.log
TRACE: 2007-10-07 14:40:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
INFO: 2007-10-07 14:41:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is successfully completed.
TRACE: 2007-10-07 14:41:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is started.
TRACE: 2007-10-07 14:41:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPPOOL' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPPOOL.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPPOOL.TSK ORA -l SAPPOOL.log
TRACE: 2007-10-07 14:41:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPPOOL' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -stop_on_error
INFO: 2007-10-07 14:42:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is successfully completed.
ERROR: 2007-10-07 14:42:38 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-07 14:42:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2007-10-07 14:42:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is started.
TRACE: 2007-10-07 14:42:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSPROT' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSPROT.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSPROT.TSK ORA -l SAPSPROT.log
TRACE: 2007-10-07 14:42:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDOCU' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDOCU.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSDOCU.TSK ORA -l SAPSDOCU.log
TRACE: 2007-10-07 14:42:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDOCU' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -stop_on_error
TRACE: 2007-10-07 14:42:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2007-10-07 14:42:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSDOCU.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-07 14:42:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-07 14:43:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is started.
TRACE: 2007-10-07 14:43:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2007-10-07 14:43:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLEXC' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSLEXC.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSLEXC.TSK ORA -l SAPSLEXC.log
TRACE: 2007-10-07 14:43:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPCLUST' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPCLUST.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPCLUST.TSK ORA -l SAPCLUST.log
TRACE: 2007-10-07 14:43:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLEXC' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
TRACE: 2007-10-07 14:43:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
ERROR: 2007-10-07 14:43:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error' exited with return code 2.
For mode details see 'SAPCLUST.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2007-10-07 14:43:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is successfully completed.
TRACE: 2007-10-07 14:43:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is started.
TRACE: 2007-10-07 14:43:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is started.
TRACE: 2007-10-07 14:43:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLOAD' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSLOAD.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSLOAD.TSK ORA -l SAPSLOAD.log
TRACE: 2007-10-07 14:43:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDDIM' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPDDIM.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDDIM.TSK ORA -l SAPDDIM.log
TRACE: 2007-10-07 14:43:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLOAD' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
TRACE: 2007-10-07 14:43:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error
ERROR: 2007-10-07 14:43:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSLOAD.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-07 14:43:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDDIM.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-07 14:44:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is started.
TRACE: 2007-10-07 14:44:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2007-10-07 14:44:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDFACT' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPDFACT.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDFACT.TSK ORA -l SAPDFACT.log
TRACE: 2007-10-07 14:44:17 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDODS' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPDODS.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDODS.TSK ORA -l SAPDODS.log
TRACE: 2007-10-07 14:44:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDFACT' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
TRACE: 2007-10-07 14:44:18 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2007-10-07 14:44:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-07 14:44:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDFACT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-07 14:44:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is started.
TRACE: 2007-10-07 14:44:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2007-10-07 14:44:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPUSER.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPUSER.TSK ORA -l SAPUSER.log
TRACE: 2007-10-07 14:44:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAP0000' import package:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -ctf I "C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAP0000.STR" "C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAP0000.TSK ORA -l SAP0000.log -o D
TRACE: 2007-10-07 14:44:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
TRACE: 2007-10-07 14:44:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPUSER' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -stop_on_error
INFO: 2007-10-07 14:44:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
INFO: 2007-10-07 14:44:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is successfully completed.
INFO: 2007-10-08 08:15:14
Import Monitor is started.
CONFIG: 2007-10-08 08:15:14
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP1;C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP2;C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3
installDir=C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-10-08 08:15:14
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-10-08 08:15:14
List of packages with views: 'SAPVIEW'.
TRACE: 2007-10-08 08:15:14 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2007-10-08 08:15:15 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\SRM05\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-10-08 08:15:15
Data codepage 1100 is determined using TOC file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2007-10-08 08:15:15
Version table 'SVERS' is found in STR file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-10-08 08:15:15
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'C:\Documents and Settings\joseph.f.n.quinto\Desktop\SRM Files\51032234\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
TRACE: 2007-10-08 08:15:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2007-10-08 08:15:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:15:20 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:15:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-08 08:15:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is started.
TRACE: 2007-10-08 08:15:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2007-10-08 08:15:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is started.
TRACE: 2007-10-08 08:15:45 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDOCU' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -stop_on_error
TRACE: 2007-10-08 08:15:45 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
TRACE: 2007-10-08 08:15:45 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLOAD' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
ERROR: 2007-10-08 08:15:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error' exited with return code 2.
For mode details see 'SAPCLUST.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:15:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSLOAD.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:15:49 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSDOCU.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2007-10-08 08:16:14 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is started.
TRACE: 2007-10-08 08:16:14 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is started.
TRACE: 2007-10-08 08:16:14 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2007-10-08 08:16:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error
TRACE: 2007-10-08 08:16:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDFACT' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
TRACE: 2007-10-08 08:16:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
ERROR: 2007-10-08 08:16:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDDIM.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:16:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDFACT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2007-10-08 08:16:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is interrupted with R3load error.
Process 'C:\usr\sap\SR1\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error' exited with return code 2.
For mode details see 'SAPDODS.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-10-08 08:16:44
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2007-10-08 08:16:44
9 error(s) during processing of packages.
INFO: 2007-10-08 08:16:44
Import Monitor is stopped.
Please let me know your thoughts.
Points will be given.

Hi Joseph,
Pls remove any spaces in names of Export Dir Dump Location e.g. SRM files make it SRM_files etc and restart the installation.
Hope this is useful
Regards
Umesh

ERROR-CONC-DG-INACTIVE ICM DOWN

Hi,
We have inserted records at the backend.
In the front end when we run our journal entry the request field inthe report is NO MANAGER.
When I click on diagnostic button it says CONC-DG-INACTIVE ICM DOWN.
Please I need help on how to resolve this.
Thanks in advance
Jaya

Edited by: hsawwan on Feb 9, 2009 1:10 PM -- Duplicate post

SOLUTION MANAGER 7.1 install on linux/oracle java error on ABAP IMPORT

Hello sdn experts, Im trying to install the Solution Manager 7.1 on linux/oracle, but It always stops at the abap import,
The error is in the Program "Migration Monitor", that exit with error.
Reviewing the logs, it seems that is trying to execute a java command line with a unrecognized option:
"Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
JVMJ9VM007E Command-line option unrecognized : -Xjvm:j9vm23"
Usage : java [-options] class...
As you can see, the sdk used is from IBM, and it works for all other saps we have here.
Is the wrong jdk? Which I should use if its wrong?
If is the right jdk, how could I get rid of this option and change it?
Any idea would be appreciated.
Thank you

Hi Maurici,
have you checked this note already?
[https://service.sap.com/sap/support/notes/1159935|https://service.sap.com/sap/support/notes/1159935]
It is about your error message. ...
Best, Hannes

Data access error during workflow- import in FDM

I am trying to perform import in FDM.But getting 'Data Access Error'.
Any suggestions on this......

Hello,
I have the same problem.
Can anyone help.
Here is the log error:
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. ORA-06550: line 2, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 2, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 3, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 3, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 4, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 4, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 5, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 5, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 6, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 6, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 7, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 8, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 8, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 9, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 9, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 10, column 13:
BEGIN
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 45645656,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 456546564,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 4556465454,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
END;
Procedure.................................... clsDataManipulation.fExecuteDML
Component.................................... upsWDataWindowDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpDataPump.fProcessSQLInsertValues
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpDataPump.fImportTextFile
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpProcessMgr.fLoadAndProcessFile
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False

IMP-00017 error during the import

IMP-00017: following statement failed with ORACLE error 2304:
"CREATE TYPE "T_CARTON_NBRS" TIMESTAMP '2009-12-16:12:04:50' OID '7296549639"
"DC2076E0430A6488C02076' "
" is table of varchar2(20);"
IMP-00003: ORACLE error 2304 encountered
ORA-02304: invalid object identifier literal
IMP-00017: following statement failed with ORACLE error 2304:
"CREATE TYPE "T_CASE_NBRS" TIMESTAMP '2009-12-16:12:04:50' OID '7296549639D8"
"2076E0430A6488C02076' "
" is table of varchar2(20);"
IMP-00003: ORACLE error 2304 encountered
ORA-02304: invalid object identifier literal
IMP-00017: following statement failed with ORACLE error 2304:
plese let me know abt this error
THANKS IN ADVANCE.

damorgan, if you have any power to influence how Oracle Forum works, I would buy you a 6pack ;-) I totally 300% agree with you.
it would be really helpful if next to SUBJECT and MESSAGE there would be two texboxes for OPERATING SYSTEM and ORACLE VERSION (these could be even as a drop-down list).
thanks a lot
jiri

Developer Mode Error during journal entry

Hi I am getting this error while entering a new journal.
Develope mode error
an oracle apps coding standards v iolation was encountered please report this probem to oracle support
fddfu.lc register_form-flex() fucntion detected a flexfield attached to a form field whose length is less than the maximum concat value lenght 700
please change the length of the field
Block : HEADER
Field : ORIGINATING_BAL_SEG_VALUE
Length : 25

Is this a base form or a custom form ? If it is a base form, pl disable any personalizations you may have on this form, and turn off all CUSTOM.pll code - then see if the error still occurs. If it does, pl open an SR with Oracle Support.
HTH
Srini Chavali

Getting invalid-attribute-value Error during Delta Import on Call-based ECMA2

I'm developing an ECMA2 MA to which supports delta imports. I have found very few samples of working code to do delta imports, so my attempts are created
using a lot of trial and error... Any samples of working Call based MA's with delta support would be much appreciated :-)
The data is located in a SQL server and the schema (for delta) is like this (simplified):
EmpID string
Status string
UPDATESTATUS string (<-- This is the update column with values New/Update/Delete)
For each EmpID, there may be multiple Status values, i.e. Status should be imported into a multi value attribute in FIM.
For the full import this is working as expected, but I run into issues when attempting to do the delta imports
The code for the delta import
private
GetImportEntriesResults GetImportEntries_Delta(GetImportEntriesRunStep importRunStep)
GetImportEntriesResults importReturnInfo;
List<CSEntryChange> csentries =
new List<CSEntryChange>();
string employeeID =
null;
string appStatus =
null;
string currEmployeeID =
CSEntryChange csentry =
null;
List<string> appStatusList =
new List<string>();
string changeMode =
for (int i = currentReadRecord; i <= da.Tables["AppStatus"].Rows.Count - 1; i++)
if (currEmployeeID != da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim())
if (currEmployeeID !=
"") // this should be true except for the first run
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
csentries.Add(csentry);
appStatusList = new
List<string>();
if (csentries.Count >= m_importPageSize)
              currentReadRecord = i;
importReturnInfo = new
GetImportEntriesResults();
importReturnInfo.MoreToImport = (i <= da.Tables["AppStatus"].Rows.Count - 1);
importReturnInfo.CSEntries = csentries;
return importReturnInfo;
changeMode = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(2).ToString().Trim();
csentry = CSEntryChange.Create();
csentry.ObjectType = "ApplicationIdentity";
employeeID = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim();
currEmployeeID = (string)employeeID;
switch (changeMode)
case "New":
csentry.ObjectModificationType = ObjectModificationType.Add;
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeAdd("EmployeeID", employeeID));
break;
case "Update":
csentry.ObjectModificationType = ObjectModificationType.Update;
csentry.DN = employeeID;
break;
case "Delete":
csentry.ObjectModificationType = ObjectModificationType.Delete;
                     csentry.DN = employeeID;
break;
default:
throw new
UnexpectedDataException(string.Format("Unknown modification type: {0}", changeMode));
appStatus = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(1).ToString().Trim();
appStatusList.Add(appStatus);
// save the last object
if (csentry != null)
csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
csentries.Add(csentry);
importReturnInfo = new
GetImportEntriesResults();
importReturnInfo.MoreToImport = false;
importReturnInfo.CSEntries = csentries;
return importReturnInfo;
The code compiles and executes, but the delta import fails with the "invalid-attribute-value" message per csentry.
From the eventlog I have the following message
The server encountered an unexpected error while performing an operation for a management agent.
"System.InvalidCastException: Unable to cast object of type 'System.Collections.Generic.List`1[System.String]' to type 'System.String'.
   at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.AddAttributeToDImage(CDImage* pdimage, String attributeName, AttributeModificationType
attributeModificationType, IList`1 attributeValueChanges, Int32 escapeReferenceDNValues)
   at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.ConvertToDImage(CSEntryChange csEntryChange, CDImage** ppDImage, Int32 escapeReferenceDNValues)
   at Microsoft.MetadirectoryServices.Impl.ScriptHost.InvokeExtMA_ImportEntry(UInt32 cBatchSize, UInt16* pcszCustomData, UInt32 cFullObject,
_OCTET* rgoctFullObject, UInt32* rgomodt, UInt32* pcpcszChangedAttributes, UInt16*** prgpcszChangedAttributes, Int32 fIsDNStyleNone, UInt16** ppszUpdatedCustomData, _OCTET* rgoctCSImage, Int32* rgextec, UInt16** rgpszErrorName, UInt16** rgpszErrorDetail, Int32*
pfMoreToImport)"
To me it seems as if FIM is unable to process the List of strings that is returned when processing the delta. Remember that this works OK when doing the full import.
Do you have any suggestions as to why this fails?
Kjetil

Hi,
Thank you Søren! I got some good clues for the right direction from your answer. If anyone would be looking same answers the correct solution would be down below. I hope it would be help for someone else too.
Get-Shema.ps1
$obj
= New-Object
-Type PSCustomObject
$obj
| Add-Member
-Type NoteProperty
-Name "Anchor-Id|String"
-Value 1
$obj
| Add-Member
-Type NoteProperty
-Name "objectClass|String"
-Value "user"
$Obj
| Add-Member
-Type NoteProperty
-Name "IsLicensed|Boolean"
-Value $true
$Obj
| Add-Member
-Type NoteProperty
-Name "FirstName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "LastName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "mail|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "immutableId|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "DisplayName|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "UsageLocation|String"
-Value ""
$Obj
| Add-Member
-Type NoteProperty
-Name "ProxyAddresses|String[]"
-Value ("","")
$Obj
| Add-Member
-Type NoteProperty
-Name "Licenses|String[]"
-Value ("","")
$obj
Import.ps1
#Always pass objects as hash table in pipeline
foreach ($User
in $Users)
$obj = @{}
$obj.Add("Id",
$User.UserPrincipalName)
$obj.Add("objectClass",
"user")
$obj.Add("IsLicensed",
$User.IsLicensed)
$obj.Add("FirstName",
$User.FirstName)
$obj.Add("LastName",
$User.LastName)
$obj.Add("mail",
$User.UserPrincipalName)
$obj.Add("immutableId",
$User.immutableId)
$obj.Add("DisplayName",
$User.DisplayName)
$obj.Add("UsageLocation",
$User.UsageLocation)
$obj.Add("ProxyAddresses", ($User.ProxyAddresses
-ne ""))
$obj.add("Licenses", ($User.Licenses.AccountSkuId))
$obj
Marti

Error during JLOAD import with Unconvertible UTF-8 character

Dear gurus,
I'm performing a system copy on ECC 6.0. SR£ double stack. During the face of jload import I receive the error
Unconvertible UTF-8 character beginning with 0xf9
while importing the table TST_RESERVATION.
Here you are the full text of the error
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_31-b03, mixed mode)
org.xml.sax.SAXException: Fatal Error: URI=null Line=1: Errore di conversione caratteri: "Unconvertible UTF-8 character beginning with 0xf9" (il numero riga potrebbe essere troppo basso).
     at com.sap.dictionary.database.dbs.XmlExtractor$XMLErrorHandler.fatalError(XmlExtractor.java:279)
     at org.apache.crimson.parser.InputEntity.fatal(InputEntity.java:1106)
     at org.apache.crimson.parser.InputEntity.fillbuf(InputEntity.java:1072)
     at org.apache.crimson.parser.InputEntity.isXmlDeclOrTextDeclPrefix(InputEntity.java:914)
     at org.apache.crimson.parser.Parser2.maybeXmlDecl(Parser2.java:1183)
     at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:653)
     at org.apache.crimson.parser.Parser2.parse(Parser2.java:337)
     at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:448)
     at com.sap.dictionary.database.dbs.XmlExtractor.map(XmlExtractor.java:130)
     at com.sap.dictionary.database.dbs.DbObjectModificationAnalyser.(DbObjectModificationAnalyser.java:38)
     at com.sap.dictionary.database.opentools.DbTableOpenTools.createTable(DbTableOpenTools.java:70)
     at com.sap.inst.jload.db.DBTable.create(DBTable.java:106)
     at com.sap.inst.jload.Jload.dbImport(Jload.java:278)
     at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
     at com.sap.inst.jload.Jload.main(Jload.java:621)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
any sugggestion?
plese advise soon.

Hi,
Are the files from the Java-CD fully readable and fully copied, for instance the java-dumpfile ?
Ensure JVM settings of note # 716604 area applied. Also, is connect possible to database by 'configtool' or does it throw an error ?
Br,
Javier

Oracle "IO Error" during SELECT query under heavy load

We're experiencing a strange connection break during SELECT queries under heavy load.
Platform Details: Solaris, Oracle 11G, JDK 1.6,
Application: Spring + Hibernate (C3p0 connection pooling)
Exact error messages from a lengthy stack trace are mentioned below:
    2013/06/05 18:49:02 | Caused by: org.springframework.dao.DataAccessResourceFailureException: Hibernate operation: could not execute query; SQL [SQL Ommitted]; IO Error: No such file or directory;      nested exception is java.sql.SQLException: IO Error: No such file or directory
    2013/06/05 18:49:02 | Caused by: java.sql.SQLException: IO Error: No such file or directory
    2013/06/05 18:49:02 |    at oracle.jdbc.driver.T4CPreparedStatement.fetch(T4CPreparedStatement.java:1091)
    2013/06/05 18:49:02 |    at oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:369)
    2013/06/05 18:49:02 |    at oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:273)
    2013/06/05 18:49:02 |    at com.mchange.v2.c3p0.impl.NewProxyResultSet.next(NewProxyResultSet.java:2706)
    2013/06/05 18:49:02 |    at org.hibernate.loader.Loader.doQuery(Loader.java:697)
    2013/06/05 18:49:02 | Caused by: java.net.SocketException: No such file or directory
    2013/06/05 18:49:02 |    at java.net.SocketInputStream.socketRead0(Native Method)
    2013/06/05 18:49:02 |    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    2013/06/05 18:49:02 |    at oracle.net.ns.Packet.receive(Packet.java:282)
We've started looking at TCP connection settings (Max. TCP connections allowed, Max File descriptors allowed for socket connections at system level). Anything we're missing?
Why "IO Error: No such file or directory"? Any clue?

user2951561 wrote:
That's a better answer indeed.
I can refine my question if it does not provide you enough information.
The stack trace i displayed here states that oracle jdbc driver has found the connection to be closed, interrupted etc.
Application behaves perfectly under normal load but blows up as soon as we reach 3000 concurrent sessions. No firewall is breaking connections, the select query that we observe this behavior for is part of a larger workflow that write data, update some, delete some as well in different tables. Then we see above stack trace for the select query.
I am trying to explore possible options to investigate. One i mentioned is related to Solaris file descriptors. Could it be database it self?
Any possible course of action for investigation? Help is much appreciated.
Oracle errors get reported with error code & message; like ORA-01555 Snapshot Too Old; which is not present in your post.
You indicated that Connection Pooling is used.
Is there some (artificial) limit within the application that falls off the cliff at 3000 sessions?
Oracle does not know or care about the "flavor" of client connection. It treats jdbc the same as OCI or ODBC connections.
Is OS limited to fixed number of open file handles?

Oracle GL error during journal import- ICM DOWN

Similar Messages

Maybe you are looking for