Oracle Instant Client version 10.2.0.2

Hello everyone......
Does anybody know the difference between OIC 10.2.0.1 and 10.2.0.2???
Does anybody know when will it be available for Windows32??
Best regards

Any idea when 10.2.0.2 Linux rpm's will be available?

Similar Messages

To Find the version of Oracle Instant Client in SAP

Hi,
I am a newbie in SAP with oracle. I have planned to upgrade the Oracle Instant Client Version in our systems.
The following is our system specificatiosn:
SAP : ECC6.0
Database : Oracle 10204
OS : HP-UX 11.23 ia64
I have the following observations with respect to finding the version of the Oracle Instant client in SAP.
a) As per the SAP note : 819829, the version of the Oracle client can be found using the command "genezi-v" under the path
genezi -v
Client Shared Library 64-bit - 10.2.0.4.0
System name:    HP-UX
Release:        B.11.23
Version:        U
Machine:        ia64
b) From the SAPGUI, I have found the version of the DB Client library as OCI_102 (10.2.0.1.0).
Following are my queries:
1) Which of the above methods can be considered to find the correct version of Oracle Instant client in SAP?
2) If the method b gives the correrct version --> Where does this value is picked up from OS level?
with regards,
Arul

Hello Arul,
just look at a work process trace file .. you will find a section like this while starting SAP or restarting the work process.
Loading DB library '/usr/sap/<SID>/SYS/exe/run/dboraslib.o' ...
Library '/usr/sap/<SID>/SYS/exe/run/dboraslib.o' loaded
Version of '/usr/sap/<SID>/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.110)
Got LIBPATH=/usr/sap/<SID>/SYS/exe/run:/usr/lib:/lib:/usr/sap/<SID>/SYS/exe/run:/opt/kerberos/lib:/oracle/client/10x_64/i
Oracle Client Version: '10.2.0.4.0', (dbsl 701 140910)
There you can find the actual used client version ... also SAP delivers a file called SAPIC_README in the oracle client directory, which gives you information about the client version and its applied patches.
Regards
Stefan

Solaris PHP 5.2.12 Oracle Instant Client Error

We are testing a Oracle Solaris Express 11 Server with the standard Apache and PHP installation. But we need the Oracle Instant client and the oci8 module enabled for our company applications.
We did this by using ./pecl install oci8 in /usr/php/5.2/bin. We set the LD_LIBRARY_PATH in /etc/apache2/2.2/envvars
a 32bits solaris (x86) version of the Oracle Instant Client 11.2 is installed in /opt/oracle/instantclient_11_2 with the symbolic link made.
envvars:
LD_LIBRARY_PATH=/opt/oracle/instantclient_11_2
ORACLE_HOME=/opt/oracle/instantclient_11_2
ORACLE_BASE=/opt/oracle/instantclient_11_2
he oci8 module installed and php loads it.
phpinfo(); output:
oci8
OCI8 Support enabled
Version 1.4.6
Revision $Revision: 313688 $
Active Persistent Connections 0
Active Connections 0
Oracle Run-time Client Library Version 11.2.0.2.0
Oracle Instant Client Version 11.2
Temporary Lob support enabled
When we first view a site there is no problem but very randomly we get the following error:
OCIEnvNlsCreate() failed. There is something wrong with your system - please check that LD_LIBRARY_PATH includes the directory with Oracle Instant Client libraries*
but when we use echo getenv("LD_LIBRARY_PATH"); in php the output is "/opt/oracle/instantclient_11_2"
now the strange this is as randomly as it appears it disappears we can load the web-page without problems and after a couple of clicks the error is back. if we wait a coupe of seconds you can reload the page and it loads normaly.
The error appears to be random and we get it over and over agian, it comes and goes after a cpl of pages are viewed. It seems to appear more when there are multiple users browsing on the website.
Is there a fix for this? is this an known bug? It seems strange the instant client works some times and fails a second later without a change in the system.
Hope someone can help us.
Edited by: user10978378 on Sep 3, 2011 4:20 AM

Solved it by compiling apache 2.2.20 into 64bits using:
CFLAGS="-m64" CXXFLAGS="-m64" LDFLAGS="-m64" ./configure enable-so enable-cgi enable-info enable-rewrite enable-deflate enable-ssl
and compiling php 5.3.8 into 64bits:
CFLAGS="-m64" CXXFLAGS="-m64" LDFLAGS="-m64" ./configure with-apxs2=/usr/local/apache2/bin/apxs with-gd with-zlib disable-ipv6 with-jpeg-dir=/usr/ with-png-dir=/usr/ with-freetype-dir=/usr/ with-pear with-openssl with-oci8=instantclient,/opt/oracle/instantclient_10_2
and using the 10.2.0.4 instant client.
there might be a bug in the 11.x ones, they dont seem to work on Oracle Solaris 11.

CR 2008 and ODBC connection using Oracle Instant Client driver?

Two questions.
I'm creating CR 2008 report using an ODBC connection. The ODBC driver is the Oracle Instant Client (version 10.2, I think.)
When I define the connection, I see only a few tables. I do not see the Tables, Views, Qualifiers tree that I see with a normal Oracle Server connection.
Does anybody know why this happens? Is there a CR ODBC driver that works better?
Second question: I have a .NET application that is pointing the report to another Oracle DB. In my db, table names are not unique -- each user has the same set of tables. I find that when the .net applciation sets the datasource, I get connected to the first table with a given name; I do not get the table scoped by the logon user.
In the .net application, how do I scope the table name to a particular user.
Any info helps. Thanks.
Tim

Hi Tim,
Below are the replies to your questions:
Answer 1: Please try the below steps:
- Make sure that in File->Options->Database Tab in the Data Explorer section the corresponding checkboxes are checked for tables, views,system tables,synonyms and stored procedures and the Table name LIKE and Owner LIKE boxes are blank.
- Please try with OLEDB connection and check the results.
- You can also refer to this SAP note no# 1215994, the link to which is given below:
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3132313539393426]
Answer 2: If you are using RAS SDK only then you would be able to change table name. Please let us know if you are using RAS.
If you are using RAS with Java please post your query in the Java forum else if you are using Visual Studio/.NET then please post your question in .NET Forum.
Please update with the results.
Thanks!

TOAD 8.5 with Oracle Instant Client 10: ORA-03134

Hi,
I have tried TOAD 8.5.0.50 and also TOra 1.3.16 to connect to the database via Oracle Instant Client 10, but I am restricted with this error message:
"ORA-03134: Connections to this server version are no longer supported."
Does anyone have any idea what is wrong? Earlier version of TOAD works alright. We are using Oracle 8i. Are there any compatibility issues between Oracle database version with Oracle Instant Client version?
Thanks.

Just want to share with everyone. This is a reply that I got from another forum:
this is a oracle bug!
connections with the 10g client are supported to 8.1.7.0 and above.
the bug in the client causes this error.
you are only able to connect to 8.1.7.4 and above.
i made a service request but oracle is not able to patch the
instant client.
you have to use 10.1.0.3 client or above
Regards.

Problem PHP Oracle - Instant Client

Hi,
i have been trying to resolve this issue but im not really sure what i need to do, could someone help me?
Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries
Im getting this error when i try to connect to a Oracle database via PHP.
My host is Windows, Oracle instant client is on C:\instantclient_11_2 and added on PATH Variables.
I think there are missing some oracle variables on my phpinfo(), below:
OCI8 Support
enabled
Version
1.4.9
Revision
$Id: 44bfa713983a99b3e59477f6532e5fb51b6dee94 $
Active Persistent Connections
0
Active Connections
0
Oracle Run-time Client Library Version
0.0.0.0.0
Oracle Instant Client Version
11.2
Temporary Lob support
enabled
Collections support
enabled
Directive
Local Value
Master Value
oci8.connection_class
no value
no value
oci8.default_prefetch
100
100
oci8.events
Off
Off
oci8.max_persistent
-1
-1
oci8.old_oci_close_semantics
Off
Off
oci8.persistent_timeout
-1
-1
oci8.ping_interval
60
60
oci8.privileged_connect
Off
Off
oci8.statement_cache_size
20
20
Environment
Variable
Value
REDIRECT_HANDLER
application/x-httpd-php
REDIRECT_STATUS
200
HTTP_HOST
marcelb01v
HTTP_USER_AGENT
Mozilla/5.0 (Windows NT 6.1; rv:28.0) Gecko/20100101 Firefox/28.0
HTTP_ACCEPT
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
HTTP_ACCEPT_LANGUAGE
en-US,en;q=0.5
HTTP_ACCEPT_ENCODING
gzip, deflate
HTTP_CONNECTION
keep-alive
PATH
C:\instantclient_11_2;O:\ora11202w\BIN;C:\PHP\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;
SystemRoot
C:\windows
COMSPEC
C:\windows\system32\cmd.exe
PATHEXT
.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
WINDIR
C:\windows
SERVER_SIGNATURE
no value
SERVER_SOFTWARE
Apache/2.2.25 (Win32) mod_fcgid/2.3.6
SERVER_NAME
marcelb01v
SERVER_ADDR
10.26.213.195
SERVER_PORT
80
REMOTE_ADDR
10.45.112.152
DOCUMENT_ROOT
C:/htdocs
SERVER_ADMIN
SCRIPT_FILENAME
C:\htdocs\stuffs\test.php
REMOTE_PORT
51461
REDIRECT_URL
/stuffs/test.php
GATEWAY_INTERFACE
CGI/1.1
SERVER_PROTOCOL
HTTP/1.1
REQUEST_METHOD
GET
QUERY_STRING
no value
REQUEST_URI
/stuffs/test.php
SCRIPT_NAME
/stuffs/test.php
ORIG_SCRIPT_FILENAME
C:/PHP/php-cgi.exe
ORIG_PATH_INFO
/stuffs/teste.php
ORIG_PATH_TRANSLATED
C:\htdocs\stuffs\test.php
ORIG_SCRIPT_NAME
/php/php-cgi.exe
PHP Variables
Variable
Value
_SERVER["REDIRECT_HANDLER"]
application/x-httpd-php
_SERVER["REDIRECT_STATUS"]
200
_SERVER["HTTP_HOST"]
marcelb01v
_SERVER["HTTP_USER_AGENT"]
Mozilla/5.0 (Windows NT 6.1; rv:28.0) Gecko/20100101 Firefox/28.0
_SERVER["HTTP_ACCEPT"]
text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
_SERVER["HTTP_ACCEPT_LANGUAGE"]
en-US,en;q=0.5
_SERVER["HTTP_ACCEPT_ENCODING"]
gzip, deflate
_SERVER["HTTP_CONNECTION"]
keep-alive
_SERVER["PATH"]
C:\instantclient_11_2;O:\ora11202w\BIN;C:\PHP\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;
_SERVER["SystemRoot"]
C:\windows
_SERVER["COMSPEC"]
C:\windows\system32\cmd.exe
_SERVER["PATHEXT"]
.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
_SERVER["WINDIR"]
C:\windows
_SERVER["SERVER_SIGNATURE"]
no value
_SERVER["SERVER_SOFTWARE"]
Apache/2.2.25 (Win32) mod_fcgid/2.3.6
_SERVER["SERVER_NAME"]
marcelb01v
_SERVER["SERVER_ADDR"]
10.26.213.195
_SERVER["SERVER_PORT"]
80
_SERVER["REMOTE_ADDR"]
10.45.112.152
_SERVER["DOCUMENT_ROOT"]
C:/htdocs
_SERVER["SERVER_ADMIN"]
_SERVER["SCRIPT_FILENAME"]
C:\htdocs\stuffs\test.php
_SERVER["REMOTE_PORT"]
51461
_SERVER["REDIRECT_URL"]
/stuffs/test.php
_SERVER["GATEWAY_INTERFACE"]
CGI/1.1
_SERVER["SERVER_PROTOCOL"]
HTTP/1.1
_SERVER["REQUEST_METHOD"]
GET
_SERVER["QUERY_STRING"]
no value
_SERVER["REQUEST_URI"]
/stuffs/test.php
_SERVER["SCRIPT_NAME"]
/stuffs/test.php
_SERVER["ORIG_SCRIPT_FILENAME"]
C:/PHP/php-cgi.exe
_SERVER["ORIG_PATH_INFO"]
/stuffs/test.php
_SERVER["ORIG_PATH_TRANSLATED"]
C:\htdocs\stuffs\test.php
_SERVER["ORIG_SCRIPT_NAME"]
/php/php-cgi.exe
_SERVER["PHP_SELF"]
/stuffs/test.php
_SERVER["REQUEST_TIME"]
1399483024

Your PATH includes "C:\instantclient_11_2;O:\ora11202". This hints that you have multiple versions of Oracle installed, which is common cause of issues.
Do you need Instant Client? If you already have an Oracle DB you don't really need Instant Client unless you have a particular version requirement.

Oracle Instant Client for Intel MacOS X

Hi all, this is my first post here (so I don't know if it's the proper place, but to try it is free. Sorry for any inconvenience).
Anybody, can confirm/explain why, one year after launch, there isn't one available download of Oracle Instant Client for Intel MacOS X?
Without it's impossible, for example, to compile PHP with OCI support under Intel MacOS X (native mode) and it's really a pain.
With PPC version existing since ages, wouldn't be absolutely easy to recompile that cool stuff for Intel MacOS X?
TIA and ciao, Eloy Lafuente :-)

Hi again...
just to know a bit more... two months later... how is customer demand going...?
Have you searched for "macos x instant client intel" ?
Aren't PHP/Perl/Ruby applications enough?
I sincerely think it's a big mistake to don't offer native connectivity for MacOS X Intel users... of course, your mistake.
Some developers, like me, will stop developing/improving Oracle support in their applications just because they use MacOS X to develop. So, those applications won't run ok under Oracle, no matter where you deploy them.
With thousands of applications running natively under MacOS X Intel... isn't there (@ Oracle) able to recompile that tiny piece of software to run under Intels... sorry but I cannot believe it.
I'll email SJ right now! Ciao :-)

OCIEnvNlsCreate():Oracle Instant Client libraries

Pls help solve this error:
[Mon Feb 18 13:45:14 2008] [error] [client 0.0.0.0] PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries in C:\\EID_Web\\test.php on line 3
[Mon Feb 18 13:45:14 2008] [error] [client 0.0.0.0] PHP Warning: oci_close() expects parameter 1 to be resource, boolean given in C:\\EID_Web\\test.php on line 14
[Mon Feb 18 13:45:18 2008] [error] [client 0.0.0.0] PHP Warning: oci_connect() [function.oci-connect]: OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries in C:\\EID_Web\\test.php on line 3
[Mon Feb 18 13:45:18 2008] [error] [client 0.0.0.0] PHP Warning: oci_close() expects parameter 1 to be resource, boolean given in C:\\EID_Web\\test.php on line 14.
tried to change the path but still no changes.
this is what i use:
apache 2.2,oracle server 10g ,instant client 10g, windows 2000,php 5.2
Message was edited by:
tamse

Make sure that you have only one Oracle Client on the client machine.
Delete/uninstall all others. Best uninstall all Oracle Software on that machine and reinstall one client.
Before you try to connect from a PHP script, try to connect with sqlplus. If that works, proceed.
The PHP you use must compiled and linked against the Oracle client version you use, else it won't work.
Now try again. If you still get the same errors, post the error messages and relevant parts of the PHP script.
Be aware that this forum is for Instant Client, so there might be better forums for PHP questions.
Yours,
Laurenz Albe

ODBC Error: Could't find Oracle Instant Client in present directory.

I am getting the following error when I try to run odbc_install.exe with the Oracle 10g Instant Client Lite version 2:
Could't find Oracle Instant Client in present directory.
The 10g Instant Client Lite version (including the missing MFC71.DLL and MSVCR71.DLL files) is in the directory. What am I missing here??

Can you detail your configuration? What files are in the directories? Environment variables?

Download old Instant Client Version 10.1.0.4 for Linux

Hi to all,
the downloads for version 10.1.0.4 of Oracle Instant Client
for linux seem to be not available anymore.
Where can I download the packages:
instantclient-basic-linux32-10.1.0.4-20050525.zip and
instantclient-sdk-linux32-10.1.0.4-20050525.zip ?
Thanks

for OWB metadata, run this following script
<OWB_HOME>/owb/reposasst/upg/upg10gTo10104.sql
For runtime data
<OWB_HOME>/owb/bin/unix/RT_upgrade_to_10_1
This is only if it's NOT upgrading to 10gR2 database
If you are upgrading to Oracle10g Release 2 with partial export and
import and if you are changing the database instance or the computer
hosting the database, then run the migration script:
For UNIX, navigate to OWB_HOME/owb/bin/unix and run
RT_migrate_to_10_1.sh.
The RT_migrate_to_10_1.sh prompts you for several parameters:
the User Name and Password of your original Runtime Repository
schema, the database connection string for your original Runtime
Repository (in the form of host:port:servicename), the User Name
and Password for your new Runtime Repository schema (whose values
should match the original Runtime Repository), and the database
connection string for the new Runtime Repository (also in the form of
host:port:servicename). Additionally, as it runs, the script prompts
you for SYS User Names and Passwords for the Oracle Database
instances for any Target Schemas and Oracle Workflows being upgraded.

Oracle Instant Client 10.1.0.3

Hi,
I'm trying to install Oracle Instant Client on a FreeBSD 6.0 machine. The PORTS system of FreeBSD requires the version 10.1.0.3, but the version available for download is 10.1.0.4. Does anyone konw where to get 10.1.0.3 version?
Thanx,
Habosh

Hi,
Here is the link where you can find the ports : http://www.freshports.org/search.php?query=linux-oracle-instantclient-&search=go&num=10&stype=name&method=match&deleted=excludedeleted&start=1&casesensitivity=caseinsensitive
One question :
I'm trying to run sqlplus, but have a pb of version :
(sh)$ sqlplus
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libsqlplus.so)
sqlplus: /lib/libpthread.so.0: version `GLIBC_2.3.2' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libclntsh.so.10.1)
sqlplus: /lib/libc.so.6: version `GLIBC_2.3' not found (required by /compat/linux/usr/lib/oracle/10.2.0.1.20050713/client/lib/libnnz10.so)
I had the same problem when I tried to compile directly from the client.
I can't find GLIBC_2.3.3 on FreeBSD 5.3.
Do you know if it works with another version of FreeBSD ? or should I install an emulator (I tried red hat 8.8, but doesn't work)? I tried to compile glib2.3.3, but it hasn't been ported on FreeBSD.
Anyway, I will try with redhat9.
Thanks,
Basha

Request: enable use of sql*plus via Oracle Instant Client.

hi,
great project....
I've just installed Raptor release 3 on top of oracle instant client, and it seems to be running fine. my sql*plus from the instant client functions from the command line, but the sql*plus menu item in the tools menu is grayed out.
review of the help files say's that oracle_home must be set, but instant client does not need an oracle_home. (uses tns_admin instead).
is there a work around for this? (other than loading the full oracle client w/ it's sql*plus)
thanks
GT

The SQL*Plus menu item does not seem to be correctly detecting the current connection context. I'm filing this as a bug to be fixed before we ship. In the current version, however, you can enable the menu item by ensuring first that the connection is selected in the Connections navigator.
When the menu is invoked, you will be prompted for the location of the SQL*Plus executable. On Windows, this should just be the path to sqlplus.exe (or sqlplusw.exe). On Unix platforms, you should include 'xterm' or an equivalent in order to ensure that SQL*Plus invokes in a window.
- John
Raptor Development Team

Oracle Instant Client is a memory hog?

Hi all,
I am having (potentially) an issue that I need to confirm with folks out there. I am not a DBA - I have a decent understanding of SQL and have been exposed to several RDBMS's, but this is my first time developing in PHP specifically with Oracle in mind.
First, my setup (note this is for development, not production; ultimately, the final deployed environment will be 2 high-end SPARC servers (one for web, one for db)):
1. DEV: Webserver running Solaris 10, Apache 2.0.52 and PHP 5.1.2 and Oracle Instant Client v.10.1.0.3 (note all versions except PHP haven been dictated by the customer). PHP is compiled with apxs2, postgres, sqlite-utf8 and oracle support (hooked into instant client).
2. DEV: DB server running Oracle 10g on Windows 2003. Using stock configuration.
I have a PHP application using AdoDB for abstraction and Smarty for templating; also using Fusebox.
The whole setup as described above works flawlessly. I notice that the apache process(es) usually sit between 20-25M given the LoadModule configuration in Apache, and the extensions being loaded in PHP. Whenever I make connection to postgres, or sqlite, the processes stay within the described memory usage patterns above (so 20-25M).
However, whenever I attempt making a connection using the Oracle Instant Client (using either native OCI8 or adoDB calls, using both persistent and non-persistent connections), the Apache process jumps from a meager 20-25M to 85M+... I don't even have to do a select - just the very action of establishing the connection results in this jump in memory usage.
What I need to know is - is this normal? Is it normal for the client to have this size of a footprint on memory? If so, I need to ensure that the final deployed environment is capable of handling these kinds of jumps. If this is NOT normal, well, heck folks, I need some friendly pointers.
Any and all help would be greatly appreciated.
Thanks,

I emailed the OCI team and got this:
'Basically, the data shared library, which is about 85MB, gets mapped to the process
virtual address when it is initially loaded by dlopen(). However, only the pages needed
by the application are actually mapped to the physical memory, and they get swapped
out by OS unless re-used. The data shared library is loaded as a shareable read-only
const data. Therefore, a process memory map should show that it is shared among all
Apache processes.'
Some linking quirks on various platforms were ironed out pretty early, but on Solaris, if
you have metalink access, check out bug 4304233 .
There is an Instant Client forum at Instant Client
-- cj

Oracle instant Client and memory

Hello everybody,
I have just installed the Oracle Instant Client on my Linux server (Redhat distibution), I recompiled PHP (4.4.2 version) with the oci8 extensions and I reboot Apache (1.3.34 version)...
In short, the installation of OIC goes perfectly (No error messages...), and I can request a remote Oracle server from a PHP file. (All this, for one PHP script that I use only once a day, to load data in a MySQL table).
However, since I installed the OIC, my Apache processes exceeds the 200 MB and my server has a commit memory more than 2GB (sometimes it goes until 5GB).
Is it a problem that can come from the OIC ? Maybe, a parameter could fix that problem ?
Thx in advance.
Maat

If you can't upgrade from PHP4, you should upgrade at least the OCI8
extension. All PHP 4 releases have a very, very old version of OCI8.
Steps to upgrade are given in the free Underground PHP and Oracle Manual
The Instant Client Basic package uses a chunk of (shareable) memory
for all its NLS data. The Instant Client Lite package uses a smaller
footprint.
Make sure you know what you are measuring and whether what you are
seeing actually has an effect on performance.
-- cj

Triying to intall oracle instant client

Hi Buddies;
I have to install oracle instant client in linux5 Red hat Enterprise.
I got to create the next:
Instant Client Package - Basic and Instant Client Package - SQL*Plus unzip it and make sqlplus runnable from anywhere ( set new PATH or copy to defined PATH) and test SQLPLUS sqlplus user/passwd@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(Host=IP or hostname)(Port=port))(CONNECT_DATA=(SID=sid)))
Is the first time I doing this; So I proceed to download the following files:
instantclient-basic-linux32-10.2.0.3-20061115.zip
oracle-instantclient-basic-10.2.0.3-1.i386.rpm
I unzipped the firt one and now I got a new directory (instantclient_10_2) whi these files:
-rwxrwxr-x 1 root root 72480394 Nov 15 2006 libociei.so
-rwxrwxr-x 1 root root 67053 Nov 15 2006 genezi
-r-xr-xr-x 1 root root 5486009 Nov 15 2006 libnnz10.so
-rwxrwxr-x 1 root root 1398088 Nov 15 2006 libocci.so.10.1
-rwxrwxr-x 1 root root 18825267 Nov 15 2006 libclntsh.so.10.1
-r--r--r-- 1 root root 1600090 Nov 15 2006 classes12.jar
-r--r--r-- 1 root root 1545954 Nov 15 2006 ojdbc14.jar
-r-xr-xr-x 1 root root 120135 Nov 15 2006 libocijdbc10.so
My doubt is, which of them to execute?
And what I have to do with file oracle-instantclient-basic-10.2.0.3-1.i386.rpm?
Besides, I don't see anything related with sqlplus, and I understand I need that.
May be this is something simple, but I not sure what to do.
Could somebody help me ?
Thanks and best Regards;
Al

At first try to check the Instant Client download page again: http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/linuxsoft.html
As you can see there are several categories of packages and description for these packages.
Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications
Instant Client Package - Basic Lite: Smaller version of the Basic, with only English error messages and Unicode, ASCII, and
Instant Client Package - JDBC Supplement: Additional support for XA, Internationalization, and RowSet operations under JDBC
Instant Client Package - SQL*Plus: Additional libraries and executable for running SQL*Plus with Instant Client
Instant Client Package - SDK: Additional header files and an example makefile for developing Oracle applications with Instant
Instant Client Package - ODBC: Additional libraries for enabling ODBC applications
Instant Client Package - WRC: Workload Replay Client used to replay workload for RAT's DB Replay Feature
You need to download those packages which are required for your application (for example).
Packages are provided in two versions. ZIP and RPM (for Redhat Package Manager).
You don't need to download both of versions. You can choose only one - ZIP or RPM, it depends on you.
Now you said, you need to use SQLPLUS.
1.So, you need to download these two packages (assume that you are running 32bit Linux):
instantclient-basic-linux32-10.2.0.3-20061115.zip
instantclient-sqlplus-linux32-10.2.0.3-20061115.zip2. Unzip these packages and you will see new directory named instantclient_10_2
3. Place this directory where you want (i.e to /opt directory)
mv instantclient_10_2 /opt/4. set the environment (still using /opt directory)
export PATH=/opt/instantclient_10_2:$PATH
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/instantclient_10_2Note: To make this settings permanent put this commands to shell profile file (i.e.: For bash it is .bash_profile file) in user's directory or to /etc/profile file to make this settings global for any user.
5. Tnsnames file. By default TNS settings is searched in these directories and in order as follows:
/home/<current user>/.tnsnames.ora (Note the dot in .tnsnames.ora in this case)
/etc/tnsnames.ora
/<path to directory where the instant client directory is located>/instantclient_10_2/network/admin/tnsnames.ora (in our case it's the /opt directory)
Hope that helps.

Oracle Instant Client version 10.2.0.2

Similar Messages

Maybe you are looking for