Oracle not startup error in lib

I upgraded SAP kernel in AIX and then oracle comes up but sap doesn't.
I run R3trans -x and I get:
This is R3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
unicode enabled version
2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/SID/SYS/exe/run') or dbms_type ('ORA')"
Thanks
Mikie B

Hi,
Make sure oracle listener is up and running.
If this is running, then check the env variable.
Thanks!

Similar Messages

O1034 Oracle not available error

Right, I'm running on a Windows Xp platform, I've installed ok and it runs ok. I have manually altered the password of user HR from within sqlplus, and everything is fine.The problem comes when I switch off and switch back on, I am unable to start the database.
Running sqlplus system/password gives me ORA-01034 Oracle not available and ORA-27101: Shared memory realm does not exist.
I have tried running stobdb.bat and startdb.bat which both run ok, but I still get the oracle not available error when going into sqlplus. It seems that the PC does not install the oracle set up on booting perhaps? I also cannot access the "Go to database home page", from my web browser, but I'm not sure if it is necessary to access that home page?

We are seeing this a little bit, and not sure what is causing it at this stage. Starting the database manually seems to help, or at least points to the root cause problems.
The steps to start the database manually are posted at Re: ORA-01033 after starting and trying to connect. and also posted below
To shutdown manually go to the SQL Command Line (as the OS user that installed Oracle).
At the SQL Prompt SQL> issue
connect / as sysdba
For example
SQL> connect / as sysdba
Connected.
Then type
shutdown immediate;
You should see the following
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
Then type
startup
You should see the following
SQL> startup
ORACLE instance started.
Total System Global Area 599785472 bytes
Fixed Size 1249348 bytes
Variable Size 192942012 bytes
Database Buffers 402653184 bytes
Redo Buffers 2940928 bytes
Database mounted.
Database opened.
Just to be sure, also try a select
select count(*) from hr.employees;
You should see
SQL> select count(*) from hr.employees;
COUNT(*)
107
Any problems or errors reported with any of these steps, please let us know.

ORA-01034: ORACLE not available error while creating ASM or database

Hi all,
I am using oracle database 10gR2 on windows 2000 pro system.
I have Installed oracle software and there was no issue with that but now I am facing ORA-01034: ORACLE not available error while trying to create asm instance or even while creating database through dbca.
I have tried creating the asm instance manually and it was succeeded. Also database creation was successful through manual steps.
Any idea guys?? How to resolve this issue??

Hi FK,
On Windows, it can sometimes mean that the services are not running. I have a check here:
http://www.dba-oracle.com/t_check_verify_windows_services.htm
Have you tried using oradim?
http://www.dba-oracle.com/tips_oradim_utility.htm
The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
The oradim utility is used on the Windows platform to perform these tasks.
C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
-starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
• startup – Indicates that the specified instance should be started.
• sid – The SID of the database to start.
• usrpwd – The password for the database user.
• starttype – Specifies whether to start the instance, the service, or both
Hope this helps. . .
Don Burleson
Oracle Press author

ORA-01034 "ORACLE not available" error

I've installed oracle8i expert edition on Solaris but I can't start up the database. I keep getting this "ORA-01034 ORACLE not available" error message. I've followed the instructions associated with this error but so far to no avail. Please help me.
Mohamed

Hi FK,
On Windows, it can sometimes mean that the services are not running. I have a check here:
http://www.dba-oracle.com/t_check_verify_windows_services.htm
Have you tried using oradim?
http://www.dba-oracle.com/tips_oradim_utility.htm
The oradim utility provides more than just the ability to start and stop Windows databases. Windows oradim can create and edit databases. It also allows DBAs to configure script-based installation mechanisms.
The oradim utility is used on the Windows platform to perform these tasks.
C:\oracle9i\bin\oradim -startup -sid ORCL92 –usrpwd manager
-starttype SRVC,INST -pfile C:\oracle9i\admin\ORCL92\pfile\init.ora
• startup – Indicates that the specified instance should be started.
• sid – The SID of the database to start.
• usrpwd – The password for the database user.
• starttype – Specifies whether to start the instance, the service, or both
Hope this helps. . .
Don Burleson
Oracle Press author

Oracle Not Availible Error - Window Vista 11g

Hi,
I am having difficulties. I log onto Oracle as sysdba. I am trying to change my oracle SYSTEM password and I get this error:
ORA-01034: ORACLE not available
Any help would be appreciated greatly appreciated!
thanks

sql> startup
After the database is open,then change the system password.
alter user system identified by <new_password>;
Anand

ORA - 01034 : ORACLE NOT AVAILABLE Error while creating new instance.

I was trying to create new instance in unix environment. I have configured all my shell scripts to run and install but while performing the install I get the
following error message and fails.
ORA-01034: ORACLE not available
I have previously installed an instance using same scripts but fails this time when I copy the scripts and modify them in new folder. Pointed out the path in the scripts correctly.
I am a junior DBA and I would appriciate your help.

Paste here scripts, your .profile (or environment variables according to Oracle) and your init.ora

Oracle Not Available Error Message

My application has been running fine until today. I have not changed any code in a while, but now I'm suddently getting the error message:
Oracle.DataAccess.Client.OracleException: ORA-1034: ORACLE not available
The database is not shutdown and I can run a query on the database server just fine. I have tried shutting down and re-starting the database, but I still get the same error.
I'm running ODP.NET 9.2.0.401.
Any suggestions? Thanks!

Hi Jimmy,
Can you run a query (e.g. using SQL*Plus) from the Client?
If so, check the Data Source=<tns_name_alias> if it matches with the alias entry in Client side tnsnames.ora.
S.H.

File not found error for /lib/masks.js

Hi Everyone,
We keep getting a file not found (404) error for
/lib/masks.js and favicon.ico. I did a complete search on our site
and could not find reference to them anywhere, does anyone know
what these files are and why we would be linked to them.
Kind Regards

Hi Dan,
If you had searched you would have found out how to make this work.
Search on "crdb_adoplus.dll" or "useLegacy" and you'll find the answer. As well as setting your framework to full and not the client.
Don

Database is not comming up. 'ORACLE not available' error

I have two servers and one master backup server. Sun OS version 10 and Oracle 10 standarded edition are installed in three servers. Database files are saved in EMC storage and storage is mounted to the server while transactions are going on. Once I mounted the storage on the master backup server, database is started. This is my environment.
In my case, while database is runing on master backup server, some one has unmounted the storage without shutting down the database. So I manually killed all oracle processes and remount the storage. Then tried to start the database, but database was not comming up and only one entry is there in the alert log saying 'instance is starting' and following message was given.
ORA-01034: ORACLE not available
ORA-27121: unable to determine size of shared memory segment
: 13: Permission denied
As well as I can't see any oracle processes are running.
Then I tried to mount the other server's storage volumes and start its database on the master backup server. Fortunatly it was started successfully.Then I tried to remount my first server and start the database. Again it was failed. Finally I restarted the server and problem solved. So I need to clarify what the reason to happen this situation. Please give me a proper solution as I am not an experienced DBA.
Each time I tried to log into the database locally.
Thank you.

Hey Man,,
I think the problem with the server name or IP try this;
Try to check the host name, I have the same problem (on windows).
I checked the host name in system32/drivers/etc/hosts.
in this file find out the ip and name of ur machine, if some thing wrong there make ur own entry with ur machine ip and name. (do not alter existing entries add your own entry)
and then reboot the system
Hope this will work.

Oracle Not Available Error

Hi Everyone,
I have properly Installed Oracle 8.1.7 (Standard Edition) On
Windows 2000 with
2GB RAM.
When I start to create database using Database Configuration
assistant after 3% I am
Getting ORA-01034 Error. I did reinstalled once again ,the same
message comes up again. May I know why? help me please?
Ramu

Hi Ramu,
Try this, what happens tell me (definitely it will work) through mail to this ID: [email protected]
1. GO TO THE "svrmgrl" file (in a 'BIN' file - do a search for files if not sure where it is). Double-click on it and a dos_style prompt will open. Type "connect internal" (without the quotes!) and press enter. Then type "startup open". Then wait a short while and the database will be opened. You will then be able to connect to sql, etc without getting this error. It is a good idea to copy this file onto your desktop as a shortcut so that when you boot/restart you can access it straight away.
by
Ravi

Oracle Not Starting : error ORA-19809

Hello All,
I was trying to start the 11gr2 database and getting the following error. Please can any one give some advise ? I manually deleted all archive logs using OS command but still i get the
same error when i try to start the database.
ORA-19815: WARNING: db_recovery_file_dest_size of 4039114752 bytes is 100.00% used, a nd has 0 remaining bytes available.
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 50629632 bytes disk space from 4039114752 limit
ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/O RCL/archivelog/2012_02_18/o1_mf_1_95_%u_.arc'
2012-02-18 15:58:55.099000 -05:00
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance DB11G - Archival Error
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_arc2_2927.trc:
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-16038: log 2 sequence# 95 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_2_7kp sydnm_.log'
ORA-00312: online log 2 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_2_7kpsyfp7_.log'
USER (ospid: 2921): terminating the instance due to error 16038
2012-02-18 15:58:56.976000 -05:00
Instance terminated by USER, pid = 2921

Rama Krishna wrote:
I think database need to be started before you do any thing with RMAN my problem is database not even starting!You told SB that you had done "option 4":
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Oh well. So you " *think* database need to be started before you do any thing with RMAN"
Did you try?
We don't need the database to be open for this, just have the control file mounted:
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@vmlnxsrv01 ~]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Feb 18 16:21:25 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area     849530880 bytes
Fixed Size                     1339824 bytes
Variable Size                578817616 bytes
Database Buffers             264241152 bytes
Redo Buffers                   5132288 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
validation succeeded for archived log
archived log file name=/orafra/ORCL/archivelog/2012_01_15/o1_mf_1_66_7k6t71k9_.arc RECID=3 STAMP=772653704
<snip>
archived log file name=/orafra/ORCL/archivelog/2012_02_18/o1_mf_1_80_7n06cfq0_.arc RECID=17 STAMP=775582480
Crosschecked 15 objects
RMAN> exit
Recovery Manager complete.
[oracle@vmlnxsrv01 ~]$ exit
logoutEdited by: EdStevens on Feb 18, 2012 4:32 PM

Oracle 8i startup error

hi all
i installed oracle 8i database on windows .but at startup it gives the error
SQL> startup;
ORA-04031: unable to allocate 76043176 bytes of shared memory
any help plz

after installation this is the first time to startup database
operating system is windows xp and oracle 8 database
the $oracle_home\database\initdb.ora contain the path IFILE='D:\oracle8\admin\db\pfile\init.ora'
content of D:\oracle8\ADMIN\db\pfile\init.ora file are
db_name = db
instance_name = db
service_names = db
db_files = 1024 # INITIAL
control_files = ("D:\oracle8\oradata\db\control01.ctl", "D:\oracle8\oradata\db\control02.ctl")
db_file_multiblock_read_count = 8 # INITIAL
db_files = 1024 # INITIAL
control_files = ("D:\oracle8\oradata\db\control01.ctl", "D:\oracle8\oradata\db\control02.ctl")
db_file_multiblock_read_count = 8 # INITIAL
db_block_buffers = 559141 # INITIAL
shared_pool_size = 262144000
java_pool_size = 20971520
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 59 # INITIAL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # INITIAL
global_names = true
oracle_trace_collection_name = ""
background_dump_dest = D:\oracle8\admin\db\bdump
user_dump_dest = D:\oracle8\admin\db\udump
db_block_size = 2048
remote_login_passwordfile = exclusive
os_authent_prefix = ""
job_queue_processes = 2
job_queue_interval = 10
open_links = 4
distributed_transactions = 500
mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
mts_servers = 1
compatible = 8.1.0
java_pool_size = 20971520
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 59 # INITIAL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # INITIAL
max_dump_file_size = 10240 # limit trace file size to 5M each
global_names = true
oracle_trace_collection_name = ""
background_dump_dest = D:\oracle8\admin\db\bdump
user_dump_dest = D:\oracle8\admin\db\udump
db_block_size = 2048
remote_login_passwordfile = exclusive
os_authent_prefix = ""
job_queue_processes = 2
job_queue_interval = 10
open_links = 4
distributed_transactions = 500
mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
mts_servers = 1
compatible = 8.1.0

SAP BW3.0 - Oracle service startup error

Hi everyone,
I am not sure whether or not this is a right place to put my question..
We have installed the SAP BW 3.0 on QA system. But yesterday onwards, it started giving an error message while starting one of oracle services before logon to sap-bw.
It says ora81http error: terminated unexpectedly; I know it is related to oracle. I posted in oracle related forums didnot get any reply.
Any experience/reason with this and possible resolution? Gurus, Please help me out..
The points will be rewarded..
thanks,
ghosh

Hi
That particular service you can stop using service manager. There is no harm.
Don't forget to award points if I am right!!
Regs
Gopi.

Error-oracle not available on linux

I installed oracle 10g on Linux server 4.0 and first time I run the sqlplus successfully
when I restart the computer it is giving ORACLE NOT AVAILABLE ERROR after entering the username and password
plz tell me the solution and why i got that error

Hi,
What U mean with oracle not available?.
Just do the following setps:
set your evn> varaible wel
#export ORACLE_HOME= home directory of oracle software
#export ORACLE_SID= name of your DB
# ps -ef |grep pmon to check you process
Regards,
Hamdy

Error: Oracle not available

Hello all,
I am trying to see the Schema folder in my database and I am gatting the Oracle not availabe error.
I can connect to it, but I can not see the tables, indexes,etc.
I want to mention that the OracleServiceSID it started (SID is the sid of my database).
Can anyone help me?
Thanks,
Luiza.

Hi,
I did start and stop every service that had the name oracle in it...
And here is my sqlnet.ora file
# SQLNET.ORA Network Configuration File: E:\OracleDB\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
Anything wrong here?
Luiza

Oracle not startup error in lib

Similar Messages

Maybe you are looking for