Site column Person or Group not working through TMG

We published our Sharepoint 2010 Site through TMG 2010, everything is working fine, except some users cannot edit the site column Person/Group in the document library. The Word 2013 opens and in the field we just see not currently available. I
have some users with Word 2013 where it's working fine, so I think this must be some word settings.
Any ideasß

Hello,
I have a similar problem (same Setting).
I get the error message that the sharepoint "saving/storing location" could not be interpreted (translation
from the German error message), after I was prompted for the user credentials. I do not get an error message on server side.
The TMG Settings:
Rule applies to published site: wi-sharepoint
Request appear to come from the Forefront TMG computer
Listener : https; 8443
Public name (changed): something.tech.at
Authentication: NTLM auth.
Bridging: Redirect top HTTP: port 81
Apply link translation to this rule
This setting works if I connect via a browser (from inside and outside)
But trying to connect via Workspace 2010 I get an error from outside (from inside it works)
The log from the TMG:
SourceExternal: 80.081.215.166:4881 (changed)
Destination: Lcoal Host (192.168.50:81)
Request: POST
http://wi-sharepoint:81/...
On the Sharepoint I configured AAM:
http://wi-sharepoint
DEFAULT => http://wi-sharepoint
http://wi-sharepoint:81
Internet => http://wi-sharepoint:81
I also tried to add:
http://something.tech.at
=> http://something.tech.at
and
http://something.tech.at
=> http://something.tech.at
but it was not working correctly.
Hope you can help.
Thanks,
Florian

Similar Messages

Imessage, facetime n personal hotspot is not working on my iphone 4

my imessage, facetime n personal hotspot is not working in my iphone4 thou my system is updated till ios 7.0.4

Depending on the country where you live, some features like FaceTime might not be available for your phone.
Others, like Hotspot, will have to be included into your data plan to be working. Contact your carrier about that.
iOS: Understanding Personal Hotspot
iOS: Troubleshooting Personal Hotspot
Learn how to troubleshoot iMessage activation.
Find information about linking your phone number to an Apple ID for use with FaceTime and iMessage.

IPod touch not working through USB in car

Does anyone know how to resolve an issue with the new IPod Touch 4th gen just purchased not working through car stereo. Have a new Toyota camry touring. You can hear sound when connected when you slide to unlock or go into an app the sound goes through the speakers fine but the radio face says loading and won't go any further, if you then try to go to the music screen it says connected so you can't get into the music to try to play. Has anyone else had this problem and resolved it. Not sure if the software of the radio can be upgraded to suit maybe at service?? Not really sure. Any help would be great

Have you contacted your auto dealer? Some users have reported problems with there car systems not worked with the latest iOS. I searched the iPod Touch forum for Toyota but did not find any previous posts concerning Toyota.
Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Column width for cl_gui_splitter_container not working

Hello friends,
I'm trying to set the column width in a splitter, but the width is not being changed. Can anyone help me ? Here is a draft of my code
At the PBO of the screen form I have the following:
data:
           gobj_split                       TYPE REF TO cl_gui_splitter_container,
          gobj_container_1        TYPE REF TO cl_gui_container,
           gobj_container_2       TYPE REF TO cl_gui_container,
           gobj_drawer_container TYPE REF TO cl_gui_docking_container,
gobj_right_container   TYPE REF TO cl_gui_docking_container,
*-- Create Container for Drawer (Left)
   IF gobj_drawer_container IS INITIAL.
     CREATE OBJECT gobj_drawer_container
       EXPORTING
         repid     = gv_repid
         dynnr     = gv_dynnr
         extension = 400
       EXCEPTIONS
         others    = 1.
   ENDIF.
*-- Create Container for the right
   IF gobj_right_container IS INITIAL.
     CREATE OBJECT gobj_right_container
       EXPORTING
         repid                       = gv_repid
         dynnr                       = gv_dynnr
         side                        = gobj_right_container->dock_at_right
         extension                   = 1500
       EXCEPTIONS
         cntl_error                  = 1
         cntl_system_error           = 2
         create_error                = 3
         lifetime_error              = 4
         lifetime_dynpro_dynpro_link = 5
         OTHERS                      = 6.
ENDIF.
*-- Create Split Object
CREATE OBJECT gobj_split
     EXPORTING
       parent            = gobj_drawer_container
       rows              = 2
       columns           = 1
     EXCEPTIONS
       cntl_error        = 1
       cntl_system_error = 2
       OTHERS            = 3.
*-- Split into two rows and one column
CALL METHOD gobj_split->get_container "Container for Date & Information
     EXPORTING
       row       = 1
       column    = 1
     RECEIVING
       container = gobj_container_1.
   CALL METHOD gobj_split->get_container "Container for Main Options
   EXPORTING
     row       = 2
     column    = 1
   RECEIVING
     container = gobj_container_2.
*-- Set Row and Column Modes to absolute
CALL METHOD gobj_split->set_row_mode
     EXPORTING
       mode = gobj_split->mode_absolute.
   CALL METHOD gobj_split->set_column_mode
     EXPORTING
       mode = gobj_split->mode_absolute.
*-- Set Row Height (THIS IS WORKING)
gobj_split->set_row_height( EXPORTING id     = 1
                                                                           height = 50 ).
*-- Set Column Width ( THIS IS NOT WORKING )
   gobj_split->set_column_width( EXPORTING id    = 1
                                                                               width   = 50 ).
And this is what I get... no matter value I put in line 80, the width doesn't change.
Does anyone have any idea why this is happening ?
Thank you

You splitted the parent container in two part upper and lower row (2 rows), so you are able to adjust the vertical size, but not the horizontal size (only 1 column) this size must be adjusted on parent container.
Regards,
Raymond

Response Groups not working

Hi there
My environment is a single Lync 2013 Front End Server installed on Server 2012.
It works since a year and now we want to use some response groups. I created 2 of them and everything seems fine but i cant call these groups. Not from internal and also not from external.
The clients shows an 500 internal server error with ID 26017.
So i traced the whole thing on the Front End Server. It seems the Response Group Service cant work with the local SQL Server. I see three error messages.
1. TL_ERROR(TF_COMPONENT) [2]0B90.37A8::07/23/2014-06:38:39.119.000002fb (RgsClientsLib,MatchMakingLocator.GetActiveInstanceFromDB:683.idx(479))
(0000000000150BA8)No instance registered as the active instance!
2. TL_ERROR(TF_COMPONENT) [1]1E08.2910::07/23/2014-06:38:42.462.00000a34 (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(000000000362D054)Call is declined because Call Control is not started.
3. TL_WARN(TF_COMPONENT) [1]0B90.0B7C::07/23/2014-06:38:48.053.00000f2d (RgsClientsLib,MatchMakingLocator.GetActiveMatchMakingInstance:683.idx(301))
(0000000000150BA8)There is currently no active MatchMaking instance in the pool.
The Lync Server Event Log shows this error when the Response Group Service starts:
LS Response Group Service ID 31067
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence.
Cause: The application has not been properly activated or the Contact object was deleted.
Resolution:
Deactivate and then activate the application for this pool.
Is there a way to reinstall / reconfigure the whole response group service incl. the active directory objects?
I hope somebody could help
Regards
Andreas

Have you seen this thread:
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working?forum=ocsclients ?
He ran Get-CsApplicationEndpoint and received a warning that let him to a resolution.
Short of that, I'd rerun step 2 in the deployment wizard and restart services when you can to see if I could jog anything loose.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

TA48312 now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me

now my iphone4 version is 6.0.1, personal hotspot does not works well as before, so i want to upgrade back to the old version 4.3.5,please help me.

Downgrading is Not supported by Apple.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

Check with your carrier or telephone service provider. Not all carriers provide this service.

Printing on HP PSC 1200 not working through WIN XP

Hi! I have a windows PC which I have connected to an HP PSC 1200 printer. My other laptops can connect perfectly to the printer and print. I set up my Mac according to the instructions but I cannot print. In windows the que name is "Remote Downlevel Print" and it is immediately giving an error. I called apple care because my exact model wasn't there so they gave me a printer which used its same driver. I can print when I connect the printer to my USB on my MacBook Pro but it does not work through Windows. If anyone could provide me with some help that would be great. Thanks.

I have a similar problem-Canon Pixma ip4000 wired to Dell desktop running Win 98 2nd ed.---- Desktop is wired to Netgear. --- I can access internet with mac book pro but not print-I could print wirelessly with Toshiba laptop running Win xp-called apple help and spent 2 hours trying to fix but we both gave up-I wonder if I could run a cable from the printer to the netgear---unfortunately no USB interface on the netgear router --so I would have to find a cable that is either USB or parallel on one side and eithernet on the other-does anyone know if this world work? If not I could buy a printer router that just takes care of the printer wirelessly-anyone know of a good one?

Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting

Hi, I have iphone 4s and since yesterday my personal hotspot will not work. It's always worked fine in the past and I have a plan with three uk which includes tethering. I've tried everything I can think of including resetting network settings, resetting the phone as a new phone but nothing works. When connected to the pc it shows on the iphone screen '1 connection' but the pc says 'no internet connection' I've spoken to three who say it must be a phone fault. Any help appreciated. :-)

If you have restored as new that pretty well covers software issues
Looks like a trip to an Apple Store and a likely Out of Warranty exchange unit £159 over the counter
May e consider an upgrade with the money ?

Personal hotspot is not working despite several attempts

personal hotspot is not working despite several attempts

From the iPhone User Manual:
Personal Hotspot
You can use Personal Hotspot (iPhone 4 or later) to share an Internet connection with a computer or other device—such as an iPod touch, iPad, or other iPhone—connected to your iPhone via Wi-Fi. You can also use Personal Hotspot to share an Internet connection with a computer connected to iPhone via Bluetooth or USB. Personal Hotspot works only if iPhone is connected to the Internet over the cellular data network.
Note: This feature may not be available in all areas. Additional fees may apply. Contact your carrier for more information.
Share an Internet connection: Go to Settings > General > Cellular and tap Set Up Personal Hotspot—if it appears—to set up the service with your carrier.
After you turn on Personal Hotspot, other devices can connect in the following ways:
W-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks.
USB: Connect your iPhone to your computer using the cable that came with it. In your computer’s Network preferences, choose iPhone and configure the network settings.
Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect iPhone with your device, refer to the documentation that came with your computer.

Router will not work through splitter

I have a new router from Verizon as the wireless signal kept dropping on my old one. I've always had my stb and router connected through a splitter and it's worked fine. The new router they have sent me which is the latest actiontec router with two antennas and gig E routing capability will not work through a splitter but will work without the splitter. I've purchased a better splitter that will carry up to a 2.4ghz signal but it still doesn't work. Verizon tech refuse to send out an engineer to help me so I'd like to ask if anyone here can shed some light on my issue. I do have two other splitters in the chain due to having two additional stb's in other rooms. I've also tried the router split with one of my other stb's with no luck.

Unfortunately, you may have simply been lucky previously.
I assume you aren't trying to play protected content through the projector, that will never work.
Assuming you aren't, you might try cycling through the resolutions.

Site not working through Transparent Proxy

I have a site that will not load through transparent proxy at one of my buildings.
I have 2 buildings with same BM setup (3.9SP2 on NW6.5 SP7). At one location, I can not resolve a web site when running through transparent proxy.
At the other location, it works just fine.
Also, if I set the proxy to either BM server, the site loads without incident.
As another note, both locations use the same internal DNS server which is located in the building where transparent proxy works for this site.
What am I missing?
Any ideas as to what to try next is greatly appreciated.

On 03/16/2010 03:26 PM, sjdimare wrote:
>
> Thanks for the reply. Both BM servers are using the same proxy.cfg file
> - Craig Johnson's - revision 30.
>
> I ran a lan trace on 2 separate PCs from the different networks.
>
> On the working network, you can see the DNS lookup in the wireshark
> log.
>
> In the network where it is not working, there is no DNS entry even
> showing that it is trying to resolve the domain name. Other sites are
> working just fine and you can see the DNS entry going to our internal
> DNS server.
>
> In the non-working segment, if I hard set the proxy, you see an HTTP
> entry going to the proxy server and resolving the domain in question.
>
> Very strange.
>
> Any new ideas are greatly appreciated.
>
> Steve D.
>
>
Then the pc failing has problem to resolve the entry. When you force the
browser, pc does not resolve anything, just send the url to bm and bm
resolve it. With TP, it is the PC who makes it. It could be that this pc
has already cached this site. But then you should see the reqesut goign
to the bm server. Without seeing the traces ( i do not understand your
there is no DNS entry even
showing that it is trying to resolve the domain name,) i can not comment
in more detail other that you've got a PC or network problem or dns
problem with this particular site, but not a bm.
if trace shows dns query from the pc and no answer, but is really
strange, do the same step but this time take a lan trace on the dns
server to confirm that request is received and what it does with it.

ClariFit IR Column Grouping not work when Control Break

Dear,
i am using ClariFit IR Column Grouping plugin for grouping column heading. Plugin is working fine. But when user use the Actions --> Format ---> Control Break option, the grouping column
disappears,
Can some body provide help on this issue or any alternate.
Regards,

Regardless of the limitations of IR, having quick access to controls significantly improves the experience.
Having used the Remote app more than usual in the last few days with my new speakers, I'm reminded of how terrible an app it is if you just want to get in and out quickly -- the Library must load every time you open the app, and then once it does load, you can only use it for a few seconds until it inexplicitly kicks you to the "Now Playing" screen. And this happens every single time you open the app or unlock your phone. So tasks that should be quick such as pausing, skipping tracks, or adjusting the volume take 15-20 seconds.
With an IR remote, those tasks are instantaneous. It doesn't excuse the fact that the iPhone app needs an overhaul, which is a separate issue.

Alert to group not working on Sharepoint 2010!

Hello,
We have a SharePoint 2010 Server which on the front page we have a news list. We have migrated to 365 and since then the alerts are not working properly. We have a local SMTP server that we use to rely to 365 since SharePoint does not support TLS by itself.
The SMTP server is working because we can set up alerts on individuals and the emails are coming. The issue is with the group. I have tried several groups but still the same issue. On some groups we receive the initial email about the creation of the alert,
but no mails after that. I have checked also the Immediate Alert service and is successful. I have checked in the mail flow on 365 and I can see the initial creation of the alert mail sent to all in the group, but the alerts on changing anything on the
list does not come into 365, so it must be a SharePoint issue which I can`t determine since the immediate alert service is running...
Can you please provide a feasible solution for this issue?
Thank you very much.
DOVC
Best Regards, Valentin Doru System Administrator

Hi Valentin,
please also open a thread at o365 community, because seems this issue happened at o365.
to try, perhaps you can re-add the group also, because it may refresh the properties from the AD group to o365.
and you may check these workaround for testing:
Option 1: Use a Redirection User
created a user in Office 365. This user is licensed to use SharePoint Online and Exchange Online.
In Exchange Online, create Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of organization, as the SharePoint Sender is not part of the Exchange Org.
In Exchange Online for the User Exchange Forwarder, created Inbox Rules. The rule is checking the Subject for a keyword and as action redirect the E-Mail to the DG and deletes it right away.
repeat this for other DGs as well.
In SharePoint Online grant the user Exchange Forwarder access to the Site to access the List
Now there are two important steps:
1) The Alert Title needs to include the token we look for in the Exchange rule
2) The “Send Alerts To” needs to be our “Exchange Forwarder”
When everything is set up an Alert will be received by Exchange Forwarder and then forwarded to the DG.
Option 2: Use a custom Workflow with the Send E-Mail To Activity
In Exchange Online creat a Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of my organization, as the SharePoint Sender is not part of the Exchange Org.
Using SharePoint Designer create a custom Workflow like the one below. In the Send E-Mail activity I specified the external SMTP Address of the DG as To-Address.
When the Workflow is executed an E-Mail is sent directly to the DG:
Background:
When sending an Alert, SharePoint is doing a Security Trimming. So SharePoint wants to be sure the recipient of the Alert has permissions to see the List Content the Alert is about. Therefore we cannot enter an SMTP-Address for an Alert but need to specify
a Security Principal known to SharePoint.
In a Workflow we don’t need to do this kind of Security Trimming. The creator / designer of the Workflow need to take care whom to send what information.
Side note: Alerts and Workflow Send E-Mail To Activities are the only possibilities in SharePoint Online to send E-Mails. Custom solutions (Sandboxed Solutions) will not work.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Groups not working in apple mail

Hi,
Since the update to 19.9.1 mail groups began working again, but now they've stopped. It used to be I could enter the first few letters in the address field and either a person's or group's name would show up to be selected. Not groups don't show up anymore.
Any idea why?

Hi!
I have the same Problem... Did u try to delete the "Envelope Index"? ( got to Library/Mail/V2/... delete all files Envelope ... Close Mail before! and then restart Mail.)
I tried that but nothing happen... How tu use Mail without search feature!!
MacBook Pro late 2009, Mac OS Yosemite (10.10)

Site column Person or Group not working through TMG

Similar Messages

Maybe you are looking for