Oracle Pacemaker Cluster

I have built active passive pacemaker cluster. I need to add oracle server as a resource to the pacemaker. I used below configuration.
crm configure primitive OracleServer ocf:heartbeat:oracle params sid=#MySID home=#MyDBHome op monitor interval=120s
But this gives me error Can somebody help me?

Hi I found the problem .......The above configuration is correct... check whether the given home path is correct
Edited by: 924297 on Mar 30, 2012 1:38 AM

Similar Messages

Private interconnect of an Oracle 10g cluster

Can you please answer below questions?
Is a direct connection between two nodes supported on the private interconnect of an Oracle 10g cluster?
We know that crossover cables are not supported, but what about a Gigabit network with a straight cable?”

Hi,
I really wouldn't suggest that approach, It is definitely not efficient and not flexible
- If you have 4 nodes, and nodes 1 want to send message to node 4, the package must go through node 2 and 3? Is it efficient? NO absolutely
- If you have e.g 2 nodes, if one of the link down in one of the nodes, the other nodes link will also down, this will most likely evicting both nodes instead of one node
- your clusterware nodes iis limited by the cable which is not efficient
- etc etc etc more disadvantages than advantages
Cheers
FZheng

Create directory on a two-node Oracle server cluster

Hi,
How can I create directory on a two-node Oracle server cluster (2 identical servers running the same Oracle database instances with shared disks)? Both of them run Windows 2008.
I know this works for Oracle running in a single server. How about in failover cluster environment?
CREATE OR REPLACE DIRECTORY g_vid_lib AS 'X:\video\library\g_rated';
Thanks.
Andy

Using 11.2.0.? Using ASM? use ACFS - it is a SHARED file system.
http://docs.oracle.com/cd/E16338_01/server.112/e10500/asmfilesystem.htm
create [big empty disk group]
create ACFS volume {container file that lives in that diskgroup]
create ACFS file system
mount the file system.
Now, all nodes in the cluster can access that shared device at the OS level just as if it were any other device.

Why do we use reverse proxy for Oracle RAC Cluster setup

Hello All,
I got this question lately.. "why do we use reverse proxy for Oracle RAC Cluster setup". I know we use the reverse proxy at Middleware level for multiple security reasons.
Thanks..

"why do we use reverse proxy for Oracle RAC Cluster setup".
I wouldn't. I wouldn't use a proxy of any sort for the Cluster Interconnect for sure.
Cheers,
Brian

How could I study Oracle linux cluster ?

Hello buddy:
I want to study Oracle linux cluster. so, where can I get started ? I read online documents, but they not tell you how to build a test enviroument using VMware.
Could you give a hint ?

user1934450 wrote:
Purpose is studying.Studying what exactly? Clusters are more than just shared disks.
I want to restablish a single instance and database using OS cluster. The shared disk just can be seen by on node server, then I can manually test this OS cluster and make switching between two nodes at least.This is not really a cluster. A cluster supports scalability - for example, if a process load is too large for a single node, some of it can spill over and be executed by another node or multiple other cluster nodes.
If you talk about standard Linux clustering, that would be running some kind of number crunching s/w (weather modeling, crunching astronomy data, etc) and running this across multiple cluster nodes.
A shared cluster storage system is one possible component of a cluster.
Taking your example - a shared cluster file system is not needed. As the other nodes cannot use that file system (if it does, it can corrupt database files) - only a single non RAC database instance can use the database. Thus the file system can only be used by a single instance on a single server. No clustering needed.
When that server fails, that file system (from the storage server) needs to be mounted on another server and the database instance started on that server.
This is not really a true cluster - simply a high availability and redundant configuration using multiple servers.
If you want to study actual real clustering - do some research using Google. Create a simple project like calculating pi for example and create a virtual 2 or 3 node cluster that run this processing in parallel - using a shared cluster file system for data storage.

Installation of CRM 2007 in Windows with oracle and cluster environment

Dear Experts,
We are about to start the installation of CRM 2007 (ABAP+JAVA) with
Oracle 10g on Windows x64 in cluster environment. In the SAPINST dialog
box under High availability option, I could see installation options like ASCS
Instance, SCS Instance, First MSCS node, Database Instance, Additional
MSCS Node, Enqueue Replication Server, Central Instance and Dialog
Instance.
I have gone through the installation guide. I have below queries
regarding the same. Can you please clarify the same
1) Our requirement is we want to have an ACTIVE-ACTIVE cluster setup
with sap service running in Node A and Database running in Node B. Can
we have this setup in ABAP+JAVA setup
2) Also,in the SAPINST dialog box as said above except last two
(Central and Dialoge instance) as per standard installation guide are
to be installed in shared drives as per the requirement. But, central
and dialog are said to be installed locally on any one node in MSCS or
in separate server. As per my understanding Dialog instance will be
used for load balancing which we do not require now. Hence I feel this
is optional in our case. Where as Central Instance I am not able to
understand why this option is for? Is it mandatory to be installed or optional. If
so, when I installed it in one of the MSCS node the incase of failover
how does it effect the system. As per my understanding ASCS and SCS
comprise central instance.
Please clarify and thanks in advance.
Regards,
Sharath Babu M
+91-9003072891

I am following as per the standard installation guide.
Regards
Sharath

How to divide equal load in Oracle Weblogic Cluster Node

Hello Friends..
I install Oracle weblogic 10.3.3.0 and oracle Forms [32 Bit] Version 11.1.1.3.0 (Production) on Two PC, PC-1 and PC-2.
I Create a cluster for load balancing and shifting the load from PC-1 to PC-2. Now I want to know which algorithm is best for equal load balance means i want to transfer equal load on both machine.
If PC-1 have 10 http request then next 10 request transfer to PC-2.
Please guide me.
Thanks,
Sachin

Hi Sachin
You need to have a load balancer or web server in front of your weblogic server cluster.
This is really a tunning excersise, so you need to try several options depending on the load of the enironment, however robin robin (default) should work for you.
You can see more details here:
Load Balancing in a Cluster
Best Regards
Luz

Oracle 11gR2 Cluster - Multiple Database

Hi ,
We have a 2 node Cluster (11gR2) hosting a database . In addition to this database , can we additional separate databases levereging the same oracle clusterware .

Hi,
Short answer: Yes, that is the idea behind Grid or Database Cloud Computing: To consolidate on the Grid Infrastructure platform.
Long answer: It depends.
In general this is a good idea and not a problem. However you will (like in all consolidation environments) be sharing same resources.
So you have to split the memory (between the databases) and care for not overloading CPU (e.g. with setting the CPU_COUNT parameter) or Storage I/O.
Regards
Sebastian

Oracle SOA Cluster Topology: BPEL Console not working

I have installed Oracle SOA Environment with the cluster topology(Hosts 3, Application Servers 3, OC4J Instances 4, HTTP Server Instances 1).
Host1: HTTP Server, Host2: OC4J(Cluster1), Host3: OC4J(Cluster2). Cluster1 and Cluster2 are connected to the same database.
BPEL Console is working fine with Host1 and Host2, and I am able to deploy and execute the processes. But when I bring up the Host3, I am getting the following error.
----------------BEGIN ERROR--------------------
Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "jdbc/BPELServerDataSourceWorkflow". The exception reported is: Listener refused the connection with the following error:
ORA-12516, TNS:listener could not find available handler with matching protocol stack
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=01hw085593)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
--------------END ERROR------------------------
Please help me in this regard.

Did you install SOA Suite on the cluster according to the documentation?
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm
Marc

Oracle EE cluster licensing

Hi,
I'd have to create a cluster with two servers. Each server is equipped with two processors (i.e. two filled sockets) which are intel quad core.
My question is: assuming that the minimum named user license number is 25, how many 25-user package shall I buy at the minimum?
25? (= the cluster counts as a unique sytem)
50? (= 25 x node)
100 (= 25 x node x processors_each_node)
Thanks in advance
Ciao

Hi,
Here you will find your answer (look the examples):
- http://www.oracle.com/corporate/pricing/sig.pdf
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com

Oracle IAS Cluster Problem

Can someone tell me how the ias cluster work?
Do it need a clustering compenont? as like db clusterware or weblogic clustering?
Thanks very much!

"Cluster" is pretty wide/open term. Bit more details about what have you got (version of Oracle Application Server, kind of installation, your topology) and what do you want to achieve by having a cluster will help us suggest something. There are multiple types of cluster configurations varying by Oracle Application Server releases.
So pl. be bit more specific about your problem/request.
Thanks
Shail

Re: Oracle Solaris Cluster 3.3 using Oracle Solaris 09/10 on virtualbox

Dear All,
I am trying to build a solaris cluster 3.3 on virtualbox using Oracle Solaris 09/10. My host OS is Ubuntu 10.10. But, when i try to add the second node, it is not able to find the node1 says "unable to connect to node1". Can anyone help me build this cluster.
my laptop is hp probook 4420s and has i3 processor and 2gb ram, wherein i have assigned 750mb ram to both Oracle Solaris 09/10 OS. Moreover, the first node is successfully attached. Both the virtual machines can ssh succesfully and link based ipmp is setup on both the virtual machines. Please help me regarding this as i am new to clustering.

As Nik said, this could be a problem with the setup of the private interconnects. This could also be caused by the fact that the necessary ports on the nodes are closed - due to secure by default.
There is an old blog entry on blogs.sun.com by Thorsten Frueauf that explains how to open the ports and/or start the necessary services. I think it is also documented now as part of the normal installation manuals.

Oracle RAC cluster ID

Hi,
I would like to know the my cluster Unique ID.
While "cemutlo -w" gives me the cluster version and "cemutlo -n" gives me the cluster name, I could not find which command will provide me the cluster ID.
Regards,
Igor

What I mean is that if I have several RAC clusters in my environment, I want to differentiate not by the cluster name but by some kind of UID of each clustereach RAC cluster have cluster name so you can identify the number in particular Cluster which you'll get in olsnodes -n.
oracle@ >olsnodes -help
Usage: olsnodes [-n] [-p] [-i] [<node> | -l] [-g] [-v]
        where
                -n print node number with the node name
                -p print private interconnect name with the node name
                -i print virtual IP name with the node name
                <node> print information for the specified node
                -l print information for the local node
                -g turn on logging
                -v run in verbose mode

Oracle 11gR2 Cluster, Some directories are owned by root after cluster rest

Hello Guys:
I have the following Directory Structure initially owned by oracle:orainventory
When I restarted the cluster it has automatically changed to root:orainventory. Is this the usual thing ? Another thing is once I installed cluster does it automatically installs enterprise dashboard? or do I need to install the database too ?
[oracle@ora2 u01]$ pwd
/u01
[oracle@ora2 u01]$ ls -l
total 16
drwxr-xr-x 5 root oinstall 4096 Aug 14 22:44 app
drwxr-xr-x 2 oracle oinstall 4096 Aug 14 19:43 oradata
drwxr-xr-x 2 root oinstall 4096 Aug 14 22:46 shared_config
drwxr-xr-x 4 oracle oinstall 4096 Aug 14 21:16 software
[oracle@ora2 u01]$ ls -l app/
total 12
drwxr-xr-x 3 root oinstall 4096 Aug 14 20:02 11.2.0
drwxrwxr-x 3 oracle oinstall 4096 Aug 14 20:02 oracle
drwxrwx--- 4 oracle oinstall 4096 Aug 14 23:10 oraInventory
[oracle@ora2 u01]$ ls -l app/11.2.0/
total 4
drwxr-xr-x 64 root oinstall 4096 Aug 14 22:46 grid
Edited by: Rama Krishna on Aug 14, 2011 9:39 PM
Edited by: Rama Krishna on Aug 14, 2011 9:41 PM
Edited by: Rama Krishna on Aug 14, 2011 9:42 PM

Hi Raman;
Some of folders,path owner is root in cluster.So please DO NOT change ownership of those files, or please DO NOT change file permissions
Regard
Helios

Oracle SOA Cluster soa-infra failing, startup coherence issues

Hi,
Have a 2 Node cluster od soa 11.1.1.5. Have 3 instances of 2 Node cluster running on the same machine. It's basically one for DEV,*TST*,*UAT* on the same machine. We have cronjobs that run every night shuts down all the cluster instances and then bring them back up. Recently one of our UAT soa cluster having issues. Both the Nodes come up fine but soa-infra in one node is not getting deployed and is down. I tried to manually start that node but no luck these are the errors I am getting in the Node where soa-infra is down. It's been working fine since recently. Any idea what might be wrong and where to look at. Any help is appreciated.
Inside the console all the servers are up and running but when going to Enterprise Manager it shows soa-infra down and only see one node.
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823364> <BEA-000000> <bpel.fatal.conection.max.retry is set to 3<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.360/533.658 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2012-11-28 23:09:52.784, Address=9.9.10.95:8083, MachineId=3944, Location=site:xxorg.com,machine:web1,process:19968, Role=WeblogicServer) has been attempting to join the cluster using WKA list [web2.xxorg.com/8.8.18.85:8083, web1.xxorg.com/9.9.10.95:8083] for 30 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>>
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823365> <BEA-000000> <<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.363/533.661 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster that does not respond to join requests; this is usually caused by a network layer failure:
Message "SeniorMemberHeartbeat"
FromMember=Member(Id=1, Timestamp=2012-11-28 21:28:09.017, Address=8.8.18.85:8083, MachineId=3968, Location=site:xxorg.com,machine:web2,process:3396, Role=WeblogicServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=17
ToPollId=0
Poll=null
Packets
    [000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=1, Direction=Incoming, ReceivedMillis=23:10:23.353, MessageType=17, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
LastRecvTimestamp=none
MemberSet=MemberSet(Size=1, BitSetCount=1, ids=[1])
}>>
<Nov 28, 2012 11:14:53 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
     at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
     Truncated. see log file for complete stacktrace
>
<anonymous>] [ecid: 0000JhFIXrrEWN0pnwh8iZ1Gi2DE000009,0] [APP: soa-infra] Cluster communication initialization failed. If you are using multicast, please make sure multicast is enabled on your network and that there is no interference on the address in use. Please see the documentation for more details.[[
com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
<Nov 29, 2012 9:20:13 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
)As we have 2 physical machines and have DEV (2-node soa cluster), TST (2-node soa cluster), UAT (2-node soa cluster) all running on the same machines and comes up and down for daily DB maintenance everynight. As it the UAT environment any help appreciated in pointing to tle location to debug.
Also have Unicast operation, and use Well-Known Addressing (WKA) configured in Console under server(s)->start tab. But looks like something with coherence that's not working for the cluster to come up and failing. Here are the unicast coherence settings we have for both servers in the console under Start Server tab as per Oracle EDG
WLS_SOA1
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web1.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083
WLS_SOA2
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web2.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083Thanks

Hi,
Have a 2 Node cluster od soa 11.1.1.5. Have 3 instances of 2 Node cluster running on the same machine. It's basically one for DEV,*TST*,*UAT* on the same machine. We have cronjobs that run every night shuts down all the cluster instances and then bring them back up. Recently one of our UAT soa cluster having issues. Both the Nodes come up fine but soa-infra in one node is not getting deployed and is down. I tried to manually start that node but no luck these are the errors I am getting in the Node where soa-infra is down. It's been working fine since recently. Any idea what might be wrong and where to look at. Any help is appreciated.
Inside the console all the servers are up and running but when going to Enterprise Manager it shows soa-infra down and only see one node.
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823364> <BEA-000000> <bpel.fatal.conection.max.retry is set to 3<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.360/533.658 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2012-11-28 23:09:52.784, Address=9.9.10.95:8083, MachineId=3944, Location=site:xxorg.com,machine:web1,process:19968, Role=WeblogicServer) has been attempting to join the cluster using WKA list [web2.xxorg.com/8.8.18.85:8083, web1.xxorg.com/9.9.10.95:8083] for 30 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>>
####<Nov 28, 2012 11:10:23 PM CST> <Notice> <Stdout> <soadev01> <WLS_SOA1> <Logger@2067016530 3.6.0.4> <<WLS Kernel>> <> <> <1354165823365> <BEA-000000> <<Nov 28, 2012 11:10:23 PM CST> <Warning> <Coherence> <BEA-000000> <2012-11-28 23:10:23.363/533.661 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster that does not respond to join requests; this is usually caused by a network layer failure:
Message "SeniorMemberHeartbeat"
FromMember=Member(Id=1, Timestamp=2012-11-28 21:28:09.017, Address=8.8.18.85:8083, MachineId=3968, Location=site:xxorg.com,machine:web2,process:3396, Role=WeblogicServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=17
ToPollId=0
Poll=null
Packets
    [000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=1, Direction=Incoming, ReceivedMillis=23:10:23.353, MessageType=17, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
LastRecvTimestamp=none
MemberSet=MemberSet(Size=1, BitSetCount=1, ids=[1])
}>>
<Nov 28, 2012 11:14:53 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
     at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
     Truncated. see log file for complete stacktrace
>
<anonymous>] [ecid: 0000JhFIXrrEWN0pnwh8iZ1Gi2DE000009,0] [APP: soa-infra] Cluster communication initialization failed. If you are using multicast, please make sure multicast is enabled on your network and that there is no interference on the address in use. Please see the documentation for more details.[[
com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
<Nov 29, 2012 9:20:13 PM CST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'soa-infra'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
    OldestMember=n/a
    ActualMemberSet=MemberSet(Size=0, BitSetCount=0
    MemberId/ServiceVersion/ServiceJoined/MemberState
)As we have 2 physical machines and have DEV (2-node soa cluster), TST (2-node soa cluster), UAT (2-node soa cluster) all running on the same machines and comes up and down for daily DB maintenance everynight. As it the UAT environment any help appreciated in pointing to tle location to debug.
Also have Unicast operation, and use Well-Known Addressing (WKA) configured in Console under server(s)->start tab. But looks like something with coherence that's not working for the cluster to come up and failing. Here are the unicast coherence settings we have for both servers in the console under Start Server tab as per Oracle EDG
WLS_SOA1
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web1.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083
WLS_SOA2
-Dtangosol.coherence.wka1=web1.xxorg.com
-Dtangosol.coherence.wka2=web2.xxorg.com
-Dtangosol.coherence.localhost=web2.xxorg.com
-Dtangosol.coherence.localport=8083
-Dtangosol.coherence.wka1.port=8083
-Dtangosol.coherence.wka2.port=8083Thanks

Oracle Pacemaker Cluster

Similar Messages

Maybe you are looking for