Oracle problem at startup

Hi
Sometimes, we have a problem when oracle has to boot from the crontab. It's necesary to kill the oracle's process, clean memory semafhore before startup. In the alert, there is the next warning:
WARNING: EINVAL creating segment of size 0x00000000c5400000
fix shm parameters in /etc/system or equivalent
We have oracle 9.2.0.5 and Solarios 5.8. The RAM is 8 Gb, the sga_max_size 3.273.628.280 and the parameter shmsys:shminfo_shmmax in the etc/system 1073741824
Any ideas?
Thanks and advance

If you start someting from the crontab be aware that no environment is there - means, you explicitly have to "source .cshrc" (depending on your shell), otherwise the environment is not correctly set and also no shell limits are set. Do you do that?
The shm* parameter looks good to me - if you can startup manually after logging in it´s ok.
Markus

Similar Messages

Problem in startup of Shadow Instance (START_SHDI_FIRST)

Hi Experts
I am having problem in 4.6B - ERP6.0 Upgrade. I have problem in startup of Shadow Instance. Here is log description.
DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
Thr 01 Fri Feb 22 19:53:01 2008
Thr 01 MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 7614
Thr 01 ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7614) http://msxxserv_mt. 1824
Thr 01 SigISetDefaultAction : default handling for signal 18
Thr 01 load acl file = /usr/sap/put/<SID>/SYS/global/ms_acl_info
Thr 01 MsGetOwnIpAddr: my host addresses are :
Thr 01 1 : http://192.168.21.21 <hostname> (HOSTNAME)
Thr 01 2 : http://127.0.0.1 localhost (LOCALHOST)
Thr 01 MsHttpInit: full qualified hostname = <hostname>
Thr 01 HTTP logging is switch off
Thr 01 ms/icf_info_server : deleted
Thr 01 *** I listen to port sapmsSHD<SID> (3602) ***
Thr 01 CUSTOMER KEY: >L0506167855
trc file: "dev_rd", trc level: 1, release: "700"
Fri Feb 22 15:25:15 2008
***LOG S00=> GwInitReader, gateway started ( 1059) http://gwxxrd.c 1691
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 1059
gateway runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw02 (socket) to port 3302
GwPrintMyHostAddr: my host addresses are :
1 : http://192.168.21.21 <hostname> (HOSTNAME)
2 : http://127.0.0.1 localhost (LOCALHOST)
Full qualified hostname =
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Feb 22 15:25:20 2008
DpShMCreate: sizeof(wp_adm) 70080 (960)
DpShMCreate: sizeof(tm_adm) 51017496 (25496)
DpShMCreate: sizeof(wp_ca_adm) 184800 (88)
DpShMCreate: sizeof(appc_ca_adm) 8800 (88)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2192040/2192048
DpShMCreate: sizeof(comm_adm) 2192048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1840)
DpShMCreate: sizeof(wall_adm) (224040/346312/80/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff5bc00000, size: 54051296)
DpShMCreate: allocated sys_adm at ffffffff5bc00000
DpShMCreate: allocated wp_adm at ffffffff5bc01cc0
DpShMCreate: allocated tm_adm_list at ffffffff5bc12e80
DpShMCreate: allocated tm_adm at ffffffff5bc12ee0
DpShMCreate: allocated appc_ca_adm at ffffffff5ece77d8
DpShMCreate: allocated comm_adm at ffffffff5ece9a38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at ffffffff5ef00ce8
DpShMCreate: allocated gw_adm at ffffffff5ef00d68
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff5ef00d98
MtxInit: -2 0 0
Fri Feb 22 15:25:26 2008
GwDpInit: attached to gw_adm at ffffffff5ef00d68
Fri Feb 22 15:25:44 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14586
STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080222195300")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SW<SID>H"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/<SID>/homeshd/<SID>
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/put/<SID>/homeshd/<SID>:/usr/j2se/jre/lib/sparc/c
lient:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/oracle/<SID>/102_64/lib:/usr/sap/I
TC/SYS/exe/run:/oracle/client/10x_64/instantclient
4 ETQ399 2008/02/22 19:53:00: put_execute: (startsap) forkpid:7500
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
Please let me know if you have any ideas.
Thanks & best Regards
L Raghunahth

Hi ,
I am forwarding the dev_w0 log.
dev_w0 ==> log is as follows
M Fri Feb 22 15:25:26 2008
M ab_init o.k.
M ThrInitGlobals o.k.
M ThrCreateShObjects           allocated 150834 bytes at ffffffff52200000
M SosRegisterMemAddr: add mem addr ffffffff52200000 / >thr_serv_info<
M SosRegisterMemAddr: add mem addr ffffffff52200010 / >thr_wpadm<
M ThrCreateShObjects o.k.
M SosRegisterMemAddr: add mem addr 1050aace0 / >ztta<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr 105328a60 / >spa<
M ThrRegisterMemAddrs o.k.
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegWpWriterJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegWpJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegUsrJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegMemJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegSysJavaNatives failed (-1)
M ThrInitRunTime o.k.
M ab_startup o.k.
N SsfSapSecin: putenv(SECUDIR=/usr/sap/put/<SID>/DVEBMGS02/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/put/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
M load shared library (/usr/sap/put/exe/libsapsecu.so), hdl 1
N ===...sucessfully completed.
N =================================================
M
M Returncode of AlMCCreateAttach (): 50
M Returncode of AlMOCreateAttach (): 50
M Returncode of AlSmesCreateAttach (): 50
M *** Start of API function likey_init ***
M likey_init: sid = "<SID>"
M likeymem_calloc (2, 21) for type "List of the SW products" returns 1050a55e0.
M likey_init: products [0] = "R3_ORA              "
M likey_init: products [1] = "R3_BASIS            "
M likey_init: basis_release = "700"
M likey_init: temporary license keys allowed.
M likey_init: running within the SAP WebAS ABAP.
M Generated absolute filename of the verify PSE: "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerif
y.pse"
M PSE name "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" memorized.
M The contents of the PSE file "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" is the 2038
version.
M SAPSECULIB initialized by calling SsfLibGetToolkit ().
M likeyper_init: insert_record memorized.
M likeyper_init: update_record memorized.
M likeyper_init: delete_record memorized.
M likeyper_init: get_record memorized.
M likeyper_init: get_all_records memorized.
M likeyper_init: cleanup memorized.
M likeyche_get_existing_buffer: buffer found in EG memory.
M likeyche_get_existing_buffer: magic number okay, reserved entries = 5, used entries = 0
M *** End of API function likey_init ***
M SAPlicense: LIKEY initialisation done
M ThBtcClnZombies o.k.
M Enq-Reset-Registration o.k.
M SosRegisterHook: add hook >rsts_storage_free(101a2ee78)< for event AFTER_STORAGE_FREE
M SosRegisterHook: add hook >rsts_before_commit(101a2efb0)< for event BEFORE_COMMIT
M SosRegisterHook: add hook >rsts_after_commit(101a2f098)< for event AFTER_COMMIT
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK_WOR
K
M SosRegisterHook: add hook >rsts_after_rollin(101a2acd0)< for event AFTER_ROLL_IN
M SosRegisterHook: add hook >rsts_before_rollout(101a2acec)< for event BEFORE_ROLL_OUT
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M DpISetTrcLog: sw<SID>h off trace logging global is off
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M ThSetTrcLogParam2 o.k.
M register db commit/rollback hook o.k.
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M MskiInitLogonTicketCacheHandle o.k.
M ThrtRegisterJCoNatives o.k.
M JrfcVmcRegisterNativesDriver o.k.
M ThJRegNatives3: java not active
M EnqVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JMonVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JTSAuthorityRegisterNatives failed
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ipl_Init returns 2 ITSPE_DISABLED: Service is disabled (sapparam)
M SosRegisterHook: add hook >DbgBeforeSessionEnd(100495c64)< for event BEFORE_SESSION_END
M SosRegisterHook: add hook >DbgBeforeTaskSw<SID>h(10049575c)< for event BEFORE_TASK_SW<SID>H
M ThDbgInit returns 0
M ThJRegNatives3: java not active
M ThDSysEnv: delete environment
M REL WP ca_blk 56
M ThDtWpBlk: detach WP ca_blk 56
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThIEmFree: delete hyper context (hyperHdl=fffffffdd99f1e60)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M set act fields to T-1/M255
M ThSetProcessPriority o.k.
M SosRegisterMemAddr: add mem addr ffffffff57412e80 / >tm_adm_list<
M SosRegisterMemAddr: add mem addr ffffffff57412ee0 / >tm_adm<
M SosRegisterMemAddr: add mem addr ffffffff57401cc0 / >wp_adm<
M SosRegisterMemAddr: add mem addr ffffffff53000000 / >wp_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4ba5f8 / >wp_ca_adm<
M SosRegisterMemAddr: add mem addr ffffffff5a4e9a38 / >comm_adm<
M SosRegisterMemAddr: add mem addr ffffffff5702edc0 / >appc_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4e77d8 / >appc_ca_adm<
M SosRegisterMemAddr: add mem addr 0 / >vmc_adm<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr ffffffff57400000 / >sys_adm<
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M db_commit98 (keep resources) o.k.
M SigSave o.k.
M rdisp/rfc_use_quotas : 1
M rdisp/rfc_max_queue : 5
M rdisp/rfc_max_login : 90
M rdisp/rfc_max_own_login : 25
M rdisp/rfc_min_wait_dia_wp : 1
M rdisp/rfc_max_own_used_wp : 75
M rdisp/rfc_max_comm_entries : 90
M rdisp/rfc_max_wait_time : 15
E Fri Feb 22 15:25:29 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M init lock table o.k.
M ThrSetMemHdl o.k.
M ThInit o.k.
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M TskhLoop: tell dispatcher: I'am ready for processing
M LOCK WP ca_blk 56
M LOCK APPC ca_blk 2
M ThIEndBg: end background processing of T-1 (type=0x41, logoff=1, freeResources=0)
M ThISend: (tm/user/type/info = -1/           ?/0x41/0x0, mode_deleted=1)
M    TASK_SW<SID>H
M    DISP
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_sw<SID>h=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThDtWpBlk: detach WP ca_blk 56
M ThISend: clear stat record
M PfClearAllRec: clear statistic area
M ThISend: stat_state = TH_STAT_CLEAR
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 56
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 18)
M -OUT- sender_id WORK_PROCESS      tid -1    wp_ca_blk   56      wp_id 0
M -OUT- action    SEND_TO_DP        uid -1    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 18
M wake_evt_udp_now 1, no dgram needed
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SW<SID>H
M TrThHookFunc: called for task sw<SID>h
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >DbgBeforeTaskSw<SID>h< for event BEFORE_TASK_SW<SID>H
M
M ********* W0 LOOP (DIA) *********
M TskhLoop: save spa pointer 105328a60 and install dummy spa
M ThRqWaitFor: wait for next request (new time slice)
M event-handling: W0, key 50240, flag 50240
M ThAlarm: no previous alarm
M ThRqWaitFor: wait for request
M Fri Feb 22 15:25:42 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time
DBHost
B 000 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080222 152515
<hostname>
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105b54538,usrhp=105b51478)
C Detaching from DB Server (con_hdl=0,svchp=105b54538,srvhp=105b56868)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1060) [dpuxtool.c   260]
M Good Bye .....
Best Regards,
L Raghunahth

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Problem in Startup 10g DB

Dear all
i m facing a little problem in startup 10g DB i m using 10g DB on Windows 2000 Professional operating system
when i start data base from enterprize manager i log on SYS user then i select Startup then i feed some parameter like
1) Host Credentials
Specify the OS user name and password to login to target database machine
i feed there operating system user name & passowrd
then
2)Specify the credentials for the target database.
To use OS authentication, leave the user name and password fields blank.*
i enter sys user and his password
Database yasir
Connect As SYSOPER
when i pressed OK button then ii face that error
Error Message
RemoteOperationException: ERROR: Wrong password for user
but my both password operatin system & sys password are correct
any one have any idea what is problem & how can i slove my problem
Thanks
Rizwan

From control panel go to
1. Administrative tool---local security policy---local security settings
2.From the local security settings windows: local policies---user rights assignment
3.double click "log on as a batch job, add the administrative user you want to assign on the OEM.
Hope this works for you.

How to stop the oracle xe from startup in windows xp.

Hi ,
I've installed Oracle Database 10g XE on my windows xp desktop.When ever my machine is getting starting oracle xe is taking a lot of time for startup.
I would like to disable the oracle xe from my startup , i can start up or stop the db anytime later using the links in start menu.
Can any one let me know how to disable oracle xe from startup.If it was any other normal programs i would have done that from the msconfig program->Startup.
Any suggesstions/solutions would be very helpful.
Thanks,
Bhasker

Got the answer to my question from the posts in other categories
How to stop Oracle XE from starting at System Startup
Re: How to stop Oracle XE from starting at System Startup
oracle at startup
oracle at startup
Oracle 10g XE - default to off at system startup
Oracle 10g XE - default to off at system startup
Thanks,
Bhasker.

ODBC/oracle problem

To further clarify the problem I mention below, the specific error I get
with integer datatypes is "Driver Not Capable". Thanks.
Date: Wed, 07 May 1997 11:53:54 -0500
To: forte users
From: Tim Clotworthy <[email protected]>
Subject: ODBC/oracle problem
I have a problem related to accessing a personal oracle database with Forteservice objects via ODBC. The problem is that I cannot do inserts into
number fields with integers or integer nullables. The only thing I can get
to work are textdata types. Has anyone else had this problem? AM I using too
old a version of ODBC driver (Oracle71 version 1.11.0002)?
>
Thanks. Tim.

This is a Forte bug I reported a few months ago. It is being tracked
under Forte call number 26402. Scheduled to be fixed in R3. There are
no work arounds that I am aware of.
Kalvin Inman
Andersen Windows
From: Tim Clotworthy[SMTP:[email protected]]
Sent: Wednesday, May 07, 1997 12:09 PM
To: [email protected]
Subject: ODBC/oracle problem
To further clarify the problem I mention below, the specific error I get
with integer datatypes is "Driver Not Capable". Thanks.
Date: Wed, 07 May 1997 11:53:54 -0500
To: forte users
From: Tim Clotworthy <[email protected]>
Subject: ODBC/oracle problem
I have a problem related to accessing a personal oracle database with Forteservice objects via ODBC. The problem is that I cannot do inserts into
number fields with integers or integer nullables. The only thing I can get
to work are textdata types. Has anyone else had this problem? AM I using too
old a version of ODBC driver (Oracle71 version 1.11.0002)?
Thanks. Tim.

I faced white screen with gray line problem on startup. How to fix it?

I faced white screen with gray line problem on startup. How to fix it?

Hi vikashjha,
Thanks for visiting Apple Support Communities.
You may find some of the troubleshooting steps in this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Jeremy

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a tests on the whole Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems during startup NWDS

Hello Experts,
Need your help: I got an error "Problems during startup, Check the ".log"....." when starting NWDS. I checked .log, here is the errors:
org.eclipse.core.internal.boot.DelegatingLoaderException: org.eclipse.core.runtime.CoreException: Problems encountered starting up plug-in: "org.eclipse.core.resources".
at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:754)
at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
Any suggestions/advises?
Thanks, Jin

Hi,
Take the backup of .metadata folder, then delete that from your workspace.
If you delete the .metadata file - It will no do any harm to your existing projects in your workspace.
But you need to import them into the NWDS again.
If there is any issue you delete the new .metadata and place the old backup .metadata.
There are no issues. I did that just now
Or
Instead of deleting the .metadata you can try giving the new workspace in -data of NWDS.
And in new workspace copy your old projects (from old workspace) and import them again into NWDS.
How to give -data
Right click on NWDS shortcut on desktop and in shortcut tab
in target input:
For example already you have like this
D:\IDE70\eclipse\SapIde.exe -vm "C:\Program Files\Java\jdk1.5.0_04\bin\javaw.exe"
then at the end add
-data "C:\NewWorkspace"
Regards,
Charan

Oracle 11gr2 Cluster startup Sequences

Hi,
What is the Sequences of starting Oracle RAC 11gr2 services?

Hi,
The Oracle 11gR2 clusterware startup sequence starting by Oracle High Availability Services Daemon ohasd
see this link for more details :)
http://www.oracle-home.ro/Oracle_Database/RAC/11gR2-Clusterware-Startup-Sequence.html
Or
From Metalink ID 1053147.1: 11gR2 Clusterware and Grid Home

What happens in ORACLE internally during STARTUP UPGRADE ?

Everyone,
Could someone please explain/guide me What happens in ORACLE internally during STARTUP UPGRADE ?
Regards,
Sakthivel

Hi;
Please check below link
startup migrate, startup upgrade, startup restrict
startup migrate, startup upgrade, startup restrict
Regard
Helios

Oracle 11gR2 systemd startup script

I would like to write down the systemd startup script here for I can't find any on the internet. wish people don't have to browse around and find nothing.
everything on internet is about 9i and no systemd startup script example.
I hv tried several times that the script runs right and start up oracle at bootup.
Issuing systemctl and it returns the following
oracle.service loaded active exited Oracle database serverthe script is working on my Fedora 18 x86_64.
Please give your input if you find mistake, error, or anything wrong.
Thank you
oracle.service
[Unit]
Description=Oracle database server
After=syslog.target network.target
[Service]
Type=oneshot
User=oracle
Group=oinstall
RemainAfterExit=yes
ExecStart=/bin/oracle.sh;
[Install]
WantedBy=multi-user.targetoracle.sh
#! /bin/bash
# script used by oracle.service
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
ORACLE_BASE=/home/oracle/app/oracle/product/11.2.0
$ORACLE_HOME/bin/lsnrctl start;
$ORACLE_HOME/bin/dbstart $ORACLE_HOME;

newbieRyan wrote:
I would like to write down the systemd startup script here for I can't find any on the internet. wish people don't have to browse around and find nothing.
everything on internet is about 9i and no systemd startup script example.Really??!?!?!
I googled 'start oracle on linux startup" and the very first hit is pretty much the standard reference on the subject: http://www.oracle-base.com/articles/linux/automating-database-startup-and-shutdown-on-linux.php
I hv tried several times that the script runs right and start up oracle at bootup.
Issuing systemctl and it returns the following
{code}
oracle.service loaded active exited Oracle database server
{code}
the script is working on my Fedora 18 x86_64.
Please give your input if you find mistake, error, or anything wrong.
Thank you
oracle.service
{code}
[Unit]
Description=Oracle database server
After=syslog.target network.target
[Service]
Type=oneshot
User=oracle
Group=oinstall
RemainAfterExit=yes
ExecStart=/bin/oracle.sh;
[Install]
WantedBy=multi-user.target
{code}
oracle.sh
{code}
#! /bin/bash
# script used by oracle.service
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=orcl
ORACLE_BASE=/home/oracle/app/oracle/product/11.2.0
$ORACLE_HOME/bin/lsnrctl start;
$ORACLE_HOME/bin/dbstart $ORACLE_HOME;
{code}

(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7

제품 : ORACLE SERVER
작성날짜 : 2003-06-02
(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7
====================================================================
PURPOSE
이 자료는 O/S startup 시에 Oracle RDBMS 서비스를 자동으로 startup하
는 방법에 대한 자료이다.
Explanation
sun solaris 부팅 시 oracle DB를 auto startup하도록 하는 데 관련된 화일들이다.
/etc/inittab : o/s의 초기화 과정을 조절하는 화일
/etc/rc2 : 부팅 run-level 2 에서 사용되는 스크립트
/etc/rc0 : 부팅 run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 symbolic link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 symbolic link
/var/opt/oracle/oratab : 시스템에 설치된 오라클 인스턴스에 대한 정보.
(참고)
/etc/init.d/dbstart, dbshut 화일은 super user(root)로 생성하시고,
symbolic link도 super user로 만드시기 바랍니다.
이 화일들은 super user가 owner가 되도록 하고, super user(root)만이
실행 가능하도록 해야 합니다.
1. 먼저 vi /etc/inittab 화일을 열어보십시오.
ap::sysinit:/sbin/autopush -f /etc/iu.ap
fs::sysinit:/sbin/rcS >/dev/console 2>&1 </dev/console
is:3:initdefault:
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/console 2>&1
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
s1:1:wait:/usr/sbin/shutdown -y -iS -g0 >/dev/console 2>&1 </dev/console
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
s3:3:wait:/sbin/rc3 >/dev/console 2>&1 </dev/console
s5:5:wait:/sbin/rc5 >/dev/console 2>&1 </dev/console
s6:6:wait:/sbin/rc6 >/dev/console 2>&1 </dev/console
fw:0:wait:/sbin/uadmin 2 0 >/dev/console 2>&1 </dev/console
of:5:wait:/sbin/uadmin 2 6 >/dev/console 2>&1 </dev/console
rb:6:wait:/sbin/uadmin 2 1 >/dev/console 2>&1 </dev/console
sc:234:respawn:/usr/lib/saf/sac -t 300
co:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` console login: " -T
sun
-d /dev/console -l console -m ldterm,ttcompat
s1부터 s6까지 os file들에 대해 위와 같이 device redirection이 연결되어
있으면 됩니다.
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
위와 같이 설정하면 run-level 2일 경우 /sbin/rc2 스크립트가 실행된다.
/sbin/rc2 는 /etc/rc2.d 디렉토리에 들어있는 스크립트를 실행한다.
만약 스크립트가 S 로 시작하면 /sbin/rc2 는 이 스크립트에 startup 파라미
터를 부여하고 여기서 지정된 프로세스를 실행시킨다.
따라서 /etc/rc2.d/S99dbstart 화일을 사용하여 dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 보자.
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /etc/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다.
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다.
따라서 /etc/rc0.d/K01dbshut 스크립트는 stop 파라미터를 갖고 실행되며
이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서 오라클을
shutdown 시킨다.
2. 그 다음에 vi /etc/rc2 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 2에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
set `/usr/bin/who -r`
if [ x$9 = "xS" -o x$9 = "x1" ]
then
echo 'The system is coming up. Please wait.'
BOOT=yes
3. 그 다음에 vi /etc/rc0 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 0에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
echo 'The system is coming down. Please wait.'
# make sure /usr is mounted before proceeding since init scripts
# and this shell depend on things on /usr file system
/sbin/mount /usr > /dev/null 2>&1
# The following segment is for historical purposes.
# There should be nothing in /etc/shutdown.d.
if [ -d /etc/shutdown.d ]
then
for f in /etc/shutdown.d/*
if [ -s $f ]
then
/sbin/sh ${f}
fi
fi
4. /etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트를 만들어야 합니다.
그 내용은 각각 다음과 같이 한 줄로 작성합니다.
/etc/init.d/dbstart 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
/etc/init.d/dbshut 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
5. /etc/rc2.d/S99dbstart 화일을 /etc/init.d/dbstart에 대한 link로 생성합니다.
ln -s /etc/init.d/dbstart /etc/rc2.d/S99dbstart
6. /etc/rc0.d/K01dbshut 화일을 /etc/init.d/dbshut에 대한 link로 생성합니다.
ln -s /etc/init.d/dbshut /etc/rc0.d/K01dbshut
7. /var/opt/oracle/oratab 화일을 엽니다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에 대한
정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며,
첫번재 필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는
N으로 구성되어 있습니다. 해당 인스턴스를 auto startup 시키려면 세번째
필드가 반드시 Y로 세팅되어 있어야 합니다.
아래에 예를 참조하세요.
ORA805:/oracle4/ora8/app/oracle/product/8.0.5:Y
ORA815:/oracle4/ora8i/app/oracle/product/8.1.5:Y
(주)
만약, <$ORACLE_HOME>/bin/dbstart 수행에 오류가 있으면 기존의 dbstart 화
일을 다른 path에 rename하고, 아래 내용만 가지고 <$ORACLE_HOME>/bin/ 아래
에 dbstart 화일을 다음과 같이 만든다.
svrmgrl <<EOF
connect internal
startup
exit
EOF
Example
none
Reference Documents
none

Hi Frank,
This is a bug in 9.0.1. It is fixed in 9.2 and
backported to 9.0.1.2 (rdbms 9.0.1.2 patch). Note that you
need to specify the sdo_indx_dims=2 in the parameter clause.
As a workaround in 9.0.1.0 you could do:
(1) remove the z coordinate (as you mentioned),
(2) set the srid to null (instead of 8307) both in
the geometries as well as the index metadata,
(3) set geodetic=false in the create-index parameters.
Hope that helps,
Ravi.

Oracle 8i Database Startup Problems

May I ask some Oracle database problems ?
1. After installing Oracle8i database on SUN Solaries,
when I run CREATE DATABASE command in nomount mode, it
said
"ORA-03113:end-of-file on communication channel" but
the database is created.
Then I run "catalog.sql" and "catproc.sql"
2. But when I "startup" the database, after the
databse is mounted, it said "ORA-01403: no data
found". I don't know whether the database is opened
normally or not.
3. When I login with account SYSTEM (sqlplus
system/manager), it said "ORA-01034: ORACLE not
available". It seems just OS Authentication works.
Those oracle background processes
(SMON,CKPT,LGWR,PMON,DBW0) already exist and redo log
file online.
Thanks a lot

Really to create a database manually is not so easy and automatically task. If you want to create a database manually you have to do this:
1.- Create initSID.ora file
2.- Set enviroment variables
3.- Create passwordfile
4.- Startup in nomunt the instance
5.- Create the database ( if this step fail , do not follow ahead )
6.- To run catalog & catproc scripts
7.- Create additional tablespaces
8.- shutdown the database
9.- Startup the database.
for more details, Chapter 2:
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96521.pdf
if you have Database Creation Assistance you can do it
easier.
Joel P�rez

Oracle 10g Database startup problem Please help

i am trying to start database but getting error;
SQL> startup
ORACLE instance started.
Total System Global Area 281018368 bytes
Fixed Size 788776 bytes
Variable Size 229373656 bytes
Database Buffers 50331648 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-16038: log 2 sequence# 44103 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'D:\ORADATA\ASDB\REDO02.LOG'
Please guide and help
Thanks,
Waheed.

The error stack is interpreted as follows:
ORA-16038:     log string sequence# string cannot be archived
Cause:     An attempt was made to archive the named file, but the file could not be archived. Examine the secondary error messages to determine the cause of the error.
Action:     No action is required
ORA-19809:     limit exceeded for recovery files
Cause:     The limit for recovery files specified by the DB_RECOVERY_FILE_DEST_SIZE was exceeded.
Action:     The error is accompanied by 19804. See message 19804 for further details.
ORA-19804:     cannot reclaim string bytes disk space from string limit
Cause:     Oracle cannot reclaim disk space of specified bytes from the DB_RECOVERY_FILE_DEST_SIZE limit.
Action:     There are five possible solutions: 1) Take frequent backup of recovery area using RMAN. 2) Consider changing RMAN retention policy. 3) Consider changing RMAN archivelog deletion policy. 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE. 5) Delete files from recovery area using RMAN.
ORA-00312:     online log string thread string: 'string'
Cause:     This message reports the filename for details of another message.
Action:     Other messages will accompany this message. See the associated messages for the appropriate action to take.
DB_RECOVERY_FILE_DEST_SIZE specifies (in bytes) the hard limit on the total space to be used by target database recovery files created in the flash recovery area. You should increase this value.
On the other hand, out from the context I guessed it is a 10gRx database, but you should specify this on your thread, as well as specify os details.
~ Madrid

Oracle problem at startup

Similar Messages

Maybe you are looking for