Oracle report server 10g with load balancer.

Hi All,
We are in very big trouble, Please help us out. Issue is
we have install oracle 10gApplication server along with Report Server stand alone, Application server and report server are working fine but when we put reports into physical load balaner its showing unable to connect report server, I try to dignose with help of some he writes me on command can you people clear me what this mean.
[oracle@rep bin]$ ./rwdiag.sh -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = rep_cbs_lhr : Type = server : Host = rep.mcb.com.pk
(2) Name = rep_rep_oracleas1 : Type = server : Host = rep.mcb.com.pk
(3) Name = rep_eoc12_oracleas1 : Type = server : Host = eoc12.mcb.com.pk
(4) Name = rep_lahore : Type = server : Host = eoc1.mcb.com.pk
(5) Name = rep_as1_as1 : Type = server : Host = as1.mcb.com.pk
(6) Name = lhr_rep : Type = server : Host = eoc1.mcb.com.pk
[oracle@rep bin]$
Regards

hi,
./rwdiag.sh -findall
rwdiag is a utility used to find all the Reports Servers on the network.
./rwdiag.sh -find <report server-name>
and it monitors packets broadcasted on the network by the particular Reports Server.
THis link might help you,details about rwdiag.sh
http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_rwdiag.htm
Regards
Fabian

Similar Messages

Oracle Application Server 10g with 11g Database

Hi everyone,
If anyone can tell, is there any compatibility issues in Oracle Application Server 10g with 11g Database?
Will it work properly?
Thanks

hi,
This will be helpful,
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#CHDBFJFD
which states
"All available editions of Oracle Database 11g (11.1.0.6) or higher are supported. Please refer to Metalink note 740417.1 for details on Oracle Database 11gR1 Certification for Oracle Application Server 10g (10.1.2.x) and Metalink note 887365.1 for details on Oracle Database 11gR2 Certification for Oracle Application Server 10g (10.1.2.x) "
Regards
Fabian

Oracle Report Server Issue with Japanese Characters

We are trying to setup a Oracle Report Server to print the Japanese characters in the PDF format.
We have separate Oracle Report servers for printing English, Chinese and Vietnamese characters in PDF formats using Oracle Reports in the production which are running properly with Unix AIX version 5.3. Now we have a requirement to print the Japanese characters. Hence we tried to setup the new server for the same and the configurations are done as same as Chinese/Vietnamese report servers. But we are not able to print the Japanese characters.
I am providing the details which we followed to configure this new server.
1.     We have modified the reports.sh to map the proper NLS_LANG (JAPANESE_AMERICA.UTF8) and other Admin folder settings.
2.     We have configured the new report server via OPMN admin.
3.     We have copied the arialuni.ttf to Printers folder and we have converted this same .ttf file in AFM format. This AFM file has been copied to $ORACLE_HOME/guicommon/gk/JP_Admin/AFM folder.
4.     We have modified the uifont.ali (JP_admin folder) file for font subsetting.
5.     We have put an entry in JP_admin/PPD/datap462.ppd as *Font ArialUnicodeMS: Standard "(Version 1.01)" Standard ROM
6.     We have modified the Tk2Motif.rgb (JP_admin folder) file for character set mapping (Tk2Motif*fontMapCs: iso8859-1=UTF8) as we have enabled this one for other report servers as well.
Environment Details:-
Unix AIX version : 5300-07-05-0831
Oracle Version : 10.1.0.4.2
NLS_LANG : JAPANESE_AMERICA.UTF8
Font Mapping : Font Sub Setting in uifont.ali
Font Used for Printing : arialuni.ttf (Font Name : Arial Unicode MS)
The error thrown in the rwEng trace (rwEng-0.trc) file is as below
[2011/9/7 8:11:4:488] Error 50103 (C Engine): 20:11:04 ERR REP-3000: Internal error starting Oracle Toolkit.
The error thrown when trying to execute the reports is…
REP-0177: Error while running in remote server
Engine rwEng-0 crashed, job Id: 67
Our investigations and findings…
1.     We disabled the entry Tk2Motif*fontMapCs: iso8859-1=UTF8 in Tk2Motif.rgb then started the server. We found that no error is thrown in the rwEng trace file and we are able to print the report also in PDF format… (Please see the attached japarial.pdf for your verification) but we are able to see only junk characters. We verified the document settings in the PDF file for ensuring the font sub set. We are able to see the font sub setting is used.
2.     If we enable the above entry then the rwEng trace throwing the above error (oracle toolkit error) and reports engine is crashed.
It will be a great help from you if you can assist us to resolve this issue…

Maybe 7zip or another tool has workarounds for broken file names, you could try that.
Or you could try to go over the files in the zip archive one-by-one and write it to files out-1, out-2, ..., out-$n without concerning yourself with the file names. You could get file endings back via the mimetype.
This script might work:
#include <stdio.h>
#include <zip.h>
static const char *template = "./out-%04d.bin";
int main(int argc, char**argv)
int err = 0;
zip_t *arc = zip_open((const char*)argv[1], ZIP_RDONLY, &err);
if(arc == NULL)
printf("Failed to open ZIP, error %d\n", err);
return -1;
zip_int64_t n = zip_get_num_entries(arc, 0);
printf("%s: # of packed files: %d\n", argv[1], n);
for(int i = 0; i < n; i++)
zip_stat_t stat;
zip_stat_index(arc, i, ZIP_FL_UNCHANGED, &stat);
char buf[stat.size];
char oname[sizeof(template)];
zip_file_t *f = zip_fopen_index(arc, (zip_int64_t)i, ZIP_FL_UNCHANGED);
zip_fread(f, (void*)&buf[0], stat.size);
snprintf(&oname[0], sizeof(template), template, i);
FILE *of = fopen(oname, "wb");
fwrite(&buf[0], stat.size, 1, of);
printf("%s: %s => %lu bytes\n", argv[1], oname, stat.size);
zip_fclose(f);
fclose(of);
zip_close(arc);
return 0;
Compile with
gcc -std=gnu99 -O3 -o unzip unzip.c -lzip
and run as
./unzip $funnyzipfile
You should get template-named, numbered output files in the current directory.
Last edited by 2ion (2015-05-21 23:09:29)

How to front-end Oracle Application Server 10g with Apache 2.0

Hello,
I have a seperate apache tier from my oracle app tier and I want to use my compiled apache as a web front-end for oracle apps. I have a completely default configuration at the moment.
The only documentation I have been able to find on Oracle's site is in regard to using mod_oc4j.so with Oracle HTTP server.
Is a compiled build of apache supported with mod_oc4j?
Where can I get the mod_oc4j.so module for apache?
Is there any good documentation I can use for installing it?

You mean to say, you found mod_oc4j.so module on Application Server CD ?
It will surely be there, cos it's an Oracle supplied module.
The Oracle HTTP Server is based on Apache 1.3 web server.
http://download.oracle.com/docs/cd/B25221_04/web.1013/b25211/overview.htm#sthref12
If you already have an Application Server 10g installation then go to:
$ORACLE_HOME/Apache/Apache/libexecTake mod_oc4j.so, mod_rewrite.so modules from here.
LoadModule mod_oc4j in httpd.conf file of Apache:
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule oc4j_module libexec/mod_oc4j.so
Make sure to load mod_rewrite.so before mod_oc4j.
Restart Apache.
Aalap Sharma :)

Connect oracle application server 10g with oracle database 9i

Hello, I am doing a project with Oracle Application Server and application server can not connect with my Oracle 9i database, how do my version of Oracle Application Server is the 10g, thanks for the help and excuse my English

Well, now it depends how do you want to access your 9i database from Application Server via J2EE application deployed at Application Server or via Portal.
For J2EE application, you can use connect string for your 9i database in datasources.xml of J2EE app.
For Portal application, again it depends what you want to do - create an data entry application or just want to fetch a report based on 9i database.
Hope I have provided answer to your question.
Regards.

Oracle Report Server Inteface with c and c++.

sir ,
How I can update schedule list with c and c++ programs which is submitted to the report server.
Ajay Nema

hi,
./rwdiag.sh -findall
rwdiag is a utility used to find all the Reports Servers on the network.
./rwdiag.sh -find <report server-name>
and it monitors packets broadcasted on the network by the particular Reports Server.
THis link might help you,details about rwdiag.sh
http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_rwdiag.htm
Regards
Fabian

Oracle Reports server 10g shutting down and starting automatically

Hi ,
My 10g Reports server runs on Redhat v4.0 .
From few days reports server log show that Reports Server is shut down and starts up automatically.
------- log -------
*** 2007/8/28 7:26:21:353 -- Shutting down engine rwEng-0
*** 2007/8/28 7:26:21:353 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 9:21:51:688 -- Reports Server started up engine rwEng-0
*** 2007/8/29 9:53:10:650 -- Shutting down engine rwEng-0
*** 2007/8/29 9:53:10:651 -- Reports Server shut down engine rwEng-0
*** 2007/8/29 1:46:18:389 -- Reports Server started up engine rwEng-0
what might be reason for above issue ?
Thanks ...
Raju

The reports server is not shutting down but rather engines used by the reports server are being stopped and started. A reports engine requests data from the data source, formats the report, sends the output to cache, and notifies the Reports Server that the job is complete. These engines are cycled like connections in a connection pool. You can configure them in the ORACLE_HOME\reports\conf\rwservlet.properties file. Look here for details:
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1006129

How to setup and run Oracle Report server 10g !

Hello everybody,
I have installed the Reports Server as a service on a Windows machine ( my OS is Window server 2003).
I created a new reports server service as following (in Command Prompt):
c:\ rwserver -install repserver autostart=yes
but not working and notified ' Please consult the installation guides for how to set up and run this program'
Has anyone showed me 'the syntax rwserver.exe' to install this service.
Please help me!
Thanks you very much,
Tran Le

Hello,
Thank you for help me very much. I use 10g(10.1.2)
After I do to follow the configuration on web but not working.
Can you show me more clearly than ?
Sorry to bother you,
Tran Le

Rewriterule in httpd.conf file of oracle application server 10g r1

Hi Team
we had hack in our report server which is load balanced oracle report server and to fix this we found a patch . that was to rewrite the url for report server . but problem is we have virtualhost configure in our httpd.conf file because of that rewriterule is not working is anybody good with httpd.conf file and help us with this.
contact of httpd.conf file
<VirtualHost *:79999>
    ServerName xx.com
    Port 80
    DocumentRoot "/OraHome_1/Apache/Apache/htdocs"
</VirtualHost>
new entry we have put in
RewriteLog /OraHome_1/Apache/Apache/logs/rewrite_din.log
RewriteLogLevel 9
RewriteEngine On
RewriteCond %{QUERY_STRING} (.*)destype=file(.*) [NC]
RewriteCond %{QUERY_STRING} (.*)desname=(.*) [NC]
RewriteCond %{QUERY_STRING} !(.*)desname=/rep_des/[A-Za-z0-9](.*) [NC]
RewriteRule (.*)reports(.*)$ /forbidden.htm [R] [NC]
but still these entries are not working . it still going to old web page not to forbidden.htm
can you please help us .

Hi,
Make sure the value of the NLS_LANG environment variable is compatible with the default locale setting of the operating system.
Check the below links :
http://docs.oracle.com/cd/B14099_19/core.1012/b14004/iasconfig.htm#BHCJHBBB
Postinstallation Tasks
Thanks,
Sharmela

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Oracle Report Server wierd problem

Hi All,
I am facing very wierd problem with oracle report server.
I am using Oracle Report Server 10g R1. The problem I am facing is as under:
There is custom parameter form where user enters report filter criteria and press a button to create the report.
The problem is that report is giving output some times and sometimes it gives no output at all. Both the times, the parameters passed by user are same. The report executions are done for both runs one after other. We have tried to look in report server trace file but could not find anything. When report server fails to give any data in the report, at the same time, we have tried to execute the report query on SQL prompt and it did return data.
Can any one give any hint where the problem could be ?
Thanks,
Ramchandra Jetwani

Hi,
When i used to get only one page the options like facing, continuous facing are disabled. And displays only single page.
These options are enabled only when there are multiple pages in pdf.
One more thing i found that it happens when I first view the report as pdf it displays
all the pages, then i change the display format to csv and again when i change
the format to pdf the problem starts.
And when I will restart the report server service, it works fine again until i wont view it in CSV format.
Message was edited by:
Yogesh

Oracle Application Server 10g Enterprise Edition

Hi,
I would like to integrate Oracle E-Business Suite Release 12.1.1 with Oracle Portal.
Idid some research in metalink and found that Note: 376811.1.
What I understood from the doc is,
1. install Oracle Application Server 10g Enterprise Edition.
2. Integrate with EBiz 12.1.1.
Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
Is it required to install OID and SSO before oracle portal installation?
A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
Thanks and Regards,
DIP

Idid some research in metalink and found that Note: 376811.1.
What I understood from the doc is,
1. install Oracle Application Server 10g Enterprise Edition.
2. Integrate with EBiz 12.1.1.
Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
- download and install OAS 10.1.2.0.2
--> Go to this link: http://www.oracle.com/technology/software/products/middleware/index.html
--> download Application Server 10gR2 (10.1.2.0.2) from the right side portlet of Previous Releases
- then upgrade its portal to 10.1.4:
--> go to metalink/MOS: search for 'oracle portal upgrade master note' and follow the note that matches best
Is it required to install OID and SSO before oracle portal installation?- Yes it is. It will be included in the OAS 10.1.2.0.2 installation
>
A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
Go to MOS/metalink: search for 'Installing Oracle Application Server 10g with Oracle E-Business Suite' and follow the note
that should be all you need.
hope that helps!
AMN

Oracle application server 10g -remote debugging

We have oracle application server 10g with oc4j. How do we configure App server to start in debug mode so remote debugging from different machine can be done.
i configured remote debugging options in opmn.xml .in the jdeveloper i attached to JPDA .when i start remote debugging i have given hostname as localhost and portnumber as 5000.
i am getting this error
Debugger attempting to connect to remote process at localhost 5000......................
Debugger unable to connect to remote process.
I have done already remote debugging using oc4j stadalone app server.but this is the first time i am trying to connect with oracle application server 10g
opmn.xml
<ias-component id="OC4J">
<process-type id="home" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5000 -Xdebug -Xnoagent -Djava.compiler=NONE -Xms512m -Xmx1024m -Xss128k "/>
<data id="oc4j-options" value="-userThreads -properties -out log/out.log -err log/err.log"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="restart-parameters">
<data id="no-reverseping-failed-ping-limit" value="2"/>
<data id="reverseping-failed-ping-limit" value="10"/>
</category>
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="3301-3400"/>
<port id="rmi" range="3201-3300"/>
<port id="jms" range="3701-3800"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
</ias-component>

Please refer
Re: Remote debugging with OC4J

Where to put jsp web report files on Oracle reports server/ Oracle AS

Dear All,
I am trying to deploy my Oracle web reports on Oracle Reports Server 10g.
I have designed a sample web application for the same and deployed it on Oracle Application Server.
What is given in the online help:
Transfer the report file ( RDF, REP, XML, or JSP) and its associated files (for example, PLL, PLX or referenced images) to the deployment directory on your application server.
Ensure the directory on the application server where you've transferred the file is listed in the Reports Server access path. If it is not, use the REPORTS_PATH environment variable, or set the sourceDir property of the Reports engine element in the server configuration file.
Now few questions:
What is the case if Application server and Reports server are different?
The reports files are to be put on Oracle AS or Oracle Reports server? In my case both are same.
1. I have tried to put the JSP files in the folder where index.html of web application is located. But it wont work and gives some error. The tld related jar is placed in the WEB-INF\lib directory.
2. I also tried to put it in a folder and referred that folder by creating an environment variable REPORTS_PATH over Reports server. But Reports server wont find it.
Please guide me in this issue.
-Sameer

Hello,
Take a look to the thread :
Re: where to add new jsp reports directory location in path
Regards

Installing Forms&Report Services with Oracle Application Server 10g Rel 3

Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
Does any body has any different idea so that they both can run more smoothly together.
Thanks
Raj
www.oraclebrains.com

They WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
Check the search function for this forum to find the previous discussions.

Oracle report server 10g with load balancer.

Similar Messages

Maybe you are looking for