Oracle Service does not start after installation of Domain role

Hi all,
here is my setting:
Windows Server 2008 R2 64bit
ORACLE ONE 11g
I installed the database and it was working fine until I installed the domain controller role on this server.
Finally I needed to uninstall this role again and restarted the server several times during this process.
Now I can not access the database anymore. Listener starts, then stops.
database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
Thanks in advance...
Meden
Edited by: user10859969 on 13.01.2012 14:29

And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
So the best solution is CTRL-ALT-DEL and start all over again.
If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
Sybrand Bakker
Senior Oracle DBA

Similar Messages

Oracle Services Does Not Start

Hi,
I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
Could anyone pls let me know the order in which the oracle services should start.
im sorry if my question confused you, bc'so im confused and stuck
Thanking u in advance
regards
Muraly

Hi,
you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
Atul

SAFARI does not start after installation

the problem: after installation the safari browser does not start. system: windows XP profesional 2002 service pack 2 ... regards

Same here, but solved.
Open up a Console and try starting Safari like I did:
-------8<-------
ki-iMac:Applications ki$ ./Safari.app/Contents/MacOS/Safari
------->8-------
Then it would come up with:
-------8<-------
2009-06-11 17:40:27.843 Safari[555:10b] GrowlSafari Error: Original (selector updateDiskImageStatus:) not found, Alternate (selector myUpdateDiskImageStatus:) was found
2009-06-11 17:40:27.845 Safari[555:10b] Loaded GrowlSafari 1.2
2009-06-11 17:40:27.868 Safari[555:10b] Videobox Safari Plugin loaded
Segmentation fault
------->8-------
After locating that plugin (does not reside in /Library/Internet Plugins/) with that posting:
[http://forums.macrumors.com/showthread.php?t=473842]
And the following commands in the console:
-------8<-------
# mkdir ~/Library/Application\ Support/SIMBL/Plugins/disabled
# mv ~/Library/Application\ Support/SIMBL/Plugins/VideoboxSafariPlugin.bundle ~/Library/Application\ Support/SIMBL/Plugins/disabled/VideoboxSafariPlugin.bundle
------->8-------
Everything works fine again.
Maybe I should update my Videobox?
Hope that helps!
Message was edited by: the.ki

Dbconsole service does not start after renaming Hostname

Hi,
I installed 10g Rel 2 successfully on a Windows XP machine, and then renamed the Computer name (Host name) of the server machine, and now the dbconsole service (for Enterprise manager) does not start up and hence I cannot access the EM through the web browser.
Is there a fixed list of files/directories to rename, if I want to access the Enterprise Manager Console, in such circumstances?
I have already made changes in Tnsnames.ora and listener.ora files. But the service still won't start successfully. It gives a "Service-specific error 2".
Thanks

Hi,
you also check .
etc/hosts -----> file in windos platform.
and edit above file and try to connect and for agent.
start agent manully
cmd>set oracle_sid=<sid>
cmd>emctl start agent
regards
Taj

Acrobat does not start after installation

Recently purchased Adobe Acrobat 11 Standard, did the fresh installation and ran the program. Nothing appears...
Searched web and forums and tried adobe cleaner, acrofix, renaming cache file but no luck.
Tried uninstalling / re-installing (using cleaner too) as well.
I do not have any creative suite products installed on this PC. (only Adobe products I have installed are: reader, AIR, flash)
This seems to be a well known issue. Is there anything I can try other than the ones I mentioned above?

I am experiencing the exact same issues as minc76274552 except that I have the acrobat 11 Pro.
I have been unable to get any assistance at all from adobe, with the exception of this forum, and this is my first post. No chat, no phone numbers - really frustrating!
No errors at installation - I have uninstalled and reinstalled multiple times thinking something must have gone awry. Nothing helps. When I try to star the program, either by double clicking on a pdf or from the shortcut, I get a rotating circle for a few seconds (like it is starting) and then it just goes away, nothing happens.
I haven't tried starting as an administrator, but I'll try that next....

SAP Download Manager does not start after installation

Hi,
i justed tried to install sap download manager as described here:
https://websmp102.sap-ag.de/~sapidb/002006825000000233132001D
using java http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
installation itself was no problem but if I start the download manager only the color setings from windows
change in blue and back to my own nothing else.
Hope you can help me.
Thanks in advance.
Sebastian
System is Win7 32bit

> i justed tried to install sap download manager as described here:
>
> https://websmp102.sap-ag.de/~sapidb/002006825000000233132001D
>
> using java http://java.sun.com/products/archive/j2se/1.4.2_12/index.html
>
> installation itself was no problem but if I start the download manager only the color setings from windows
> change in blue and back to my own nothing else.
Are you intentionally using such an old JDK?
Markus

Opmn service does not start when try to start Oracle BI Services

Hi ,
I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
Any Idea how to fix this one.
Thanks

Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

Listener service not starting after installation (10g on WinXP)

Hi!
I installed 10.2.0.1 on a Windows XP machine, but for some reason the listener service does not start up. If I start the service from the Windows service control panel I get:
The service "OracleOraDB10g_home1TNSListener" on "Local Computer" could not be started. Error 3: The system could not find the specified path."
The path for the servicing exe is "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR", which is the correct path.
Executing "lsnrctl status" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 09:53:37
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
TNS-12541: TNS: No Listener
TNS-12560: TNS: Error with protocol adapter
TNS-00511: No Listener
32-bit Windows Error: 61: Unknown error
{code}
Executing "lsnrctl start" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:02:10
Copyright (c) 1991, 2005, Oracle. All rights reserved.
tnslsnr is getting started: Please wait...
Failed to start service, error 3.
TNS-12560: TNS: Error with protocol adapter
TNS-00530: Error with protocol adapter
{code}
When I open a another command shell and run the servicing exe "G:\oracle\product\10.2.0\db_1\BIN\TNSLSNR" directly and executing "lsnrctl status" I get:
{code}
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 27-MAI-2009 10:10:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xpdeveloper)(PORT=1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Startdatum 27-MAI-2009 10:10:17
Uptime 0 Tage 0 Std. 0 Min. 10 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener G:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log-Datei des Listener G:\oracle\product\10.2.0\db_1\network\log\listener.log
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpdeveloper)(PORT=1521)))
Der Listener unterst³tzt keine Services
Der Befehl wurde erfolgreich ausgef³hrt.
{code}
I can also successfully tnsping the listener.
Any ideas why the listener service fails to start?
Thanks a lot for your help,
Marcus

Hi Florian,
my understanding was that on Windows ORACLE_HOME is stored in the registry.
I have a correct path to my Oracle home directory under "HKLM\Software\Oracle\KEY_OraDB10g_home1\ORACLE_HOME".
Following your suggestion, I added a Windows environment variable "ORACLE_HOME" that points to the Oracle home directory, rebooted and tried to start the service again, but nothing changed.
Marcus

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

OracleOraDb10g_home1TNSListener service does not start

I am using Win XP. I have installed Oracle 10g.
OracleOraDb10g_home1TNSListener service does not start. If started manually, it automatically gets stopped.
As result, if I connect to Orcale 10 database through Java, I get Network Adapter error.
what I need to do for OracleOraDb10g_home1TNSListener service to start after clicking 'Start' on it through Services in Control Panel/Admin Tools
Thanks

Oracle installation was successful.
after lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 04-MAR-2006 23:03
:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.or
a
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=uc-52b3c4f41f58.er
c-wireless.uc.edu)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
Listener failed to start. See the error message(s) above...
After correcting Host in listner.ora, listner started. However before making this change, this service was getting started though listener.ora had wrong host name.
Thanks.

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

WebAnalysis does not start after workspace is set on Windows Authentication

I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.

Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

PIA service does not start

Hi,
my webserver is Weblogic (9.2, Tools 8.49 , HRMS90). PIa service does not start automaticaly when I start/boot the server. I should run startPIA.cmd. And then I can connect in 4/3.
Do you have any idea for that ?
In windows Evenetlog it says Event Type: Warning
Event Source: beasvc
Description:
peoplesoft-PIA service stopped
Thank for help.

after u install PIA , u can start the server from the cmd by issuing a command called StartPIA.cmd ,
or u can tie the domain to a service type called NT service, and schedule the service to be automatic. it keeps running as long as ur box is up. once u reboot it , service stops for a while and start again. this is automatic type of bringing up the server.
ur bEA weblogic when installed sets the path for jdk and jre which are used by the server to come up properly.
even after this if u have trouble, please paste the logs. logs are found under PS_HOME\webserver\domain_name\logs
bea logs are under bea DIR.
Thnks!

ACS 3.3 - CSAdmin service does not start

Hello all,
I'm running Windows 2003 Server (Enterprise). I installed the eval version of ACS 3.3. The installation process was successful. However, the CSAdmin service does not start. There is an Event Log error that states:
Failed to initialize AAA Client Config Module.
Anyone seen this before?
Let me know if anyone has any suggestions.
Thanks,

Saw this and it turned out to be the user had eTrust virus scanning on the server also. Removing that and reinstalling the ACS software fixed it up. Can you check that you don't have that specific software (we may need to file an incompatibility bug), or try removing any other virus/firewalling software that may be causing issues.

Oracle Service does not start after installation of Domain role

Similar Messages

Maybe you are looking for