Oracle XE database take more place everyday

Hi everyone,
I know I'm not on the correct forum but I can't
access the Oracle XE forum. It keeps telling me
"Error: you do not have permission to view the
requested forum or category."
I'm registered to the XE forum (but I never receive
the confirmation email). I don't know what's going
on. So, I'm posting here joping someone could help
me.Since you are registered, once you log on to the http://forums.oracle.com with the same userid you registered, you should see the XE forum at the bottom of the page.
I have installed Oracle XE database and each time I
use it, I have the impression that it takes more and
more place on my hard drive.
For example I checked yesterday, it used 18.4Gb,
today, it's a little more than 19Gb (Gb = giga
bytes).
I didn't know Oracle XE would use so many hard drive
space. I still have 4 giga free on that disk and I
was wondering if it is possible to stop this
expansion ?? XE will not use more than 4GB user data space plus 1-1.5 software and system database space.
However, XE generates a lot of logs, (eg: alert_XE.log), and may generate 'archive logs' which are used for disk crash recovery, and may generate a log of backups if you have RMAN turned on.
If you are still using the Apex installed with XE, and not the new Apex 3.0.1, then you will get a lot of this kind of information from the documentation at http://www.oracle.com/pls/xe102/homepage - specifically look at the 2-Day DBA manual in Chapters 6 and 11

Similar Messages

Auditing in oracle 10g database and oracle 10g application server

Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,

Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg

Takes more time to start & shutdown the database

Hi All,
I have created a database in oracle9i by following manual steps. Every thing was created successfully and am able to start the database and shutdown also.
but the problem is while giving the startup command it takes more time to start the database and the same during the shutdown. So anyone help me..
the follwing are the pfile specifications:
db_name=practice
instance_name=practice
control_files= 'E:\practice\control\control1.ctl',
'D:\practice\control\control2.ctl'
db_block_size=2048
db_cache_size=20m
shared_pool_size=20m
background_dump_dest='E:\practice\bdump'
user_dump_dest='E:\practice\udump'
Thanks in Advance

Every thing was created successfully and am able to start the database and > shutdown also.Please restate the above.
problem is while giving the startup command it takes more time to start the >database and the same during the shutdownHow have you compared? Could it be O/S resources, installation of additional software; you have not mentioned the O/S and complete version of your database.
You can review the following although I am bit unclear;
http://download.oracle.com/docs/cd/B10501_01/server.920/a96533/instreco.htm#440322
Adith

10g Full Database Dump Takes more than 2 Hours Still not finished

Hi all,
Full Database Dump Takes more than 2 Hours, Still not finished.
Version - Oracle 10g 1.0.2.0
Database Size is Around 160GB.
Used Below Query to take Full Database Dump.
expdp user/pwd@10gdb full=y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
It takes more than 1 hour in processing the functions.i.e)
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
And the Log File:
Export: Release 10.1.0.2.0 - Production on Friday, 04 May, 2012 10:17
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
FLASHBACK automatically enabled to preserve database integrity.
Starting "EXPTEST"."SYS_EXPORT_FULL_02": exptest/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
Estimate in progress using BLOCKS method...
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 4.574 GB
Processing object type DATABASE_EXPORT/TABLESPACE
Processing object type DATABASE_EXPORT/DE_SYS_USER/USER
Processing object type DATABASE_EXPORT/SCHEMA/USER
Processing object type DATABASE_EXPORT/ROLE
Processing object type DATABASE_EXPORT/GRANT/SYSTEM_GRANT/PROC_SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/GRANT/SYSTEM_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/ROLE_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/DEFAULT_ROLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLESPACE_QUOTA
Processing object type DATABASE_EXPORT/RESOURCE_COST
Processing object type DATABASE_EXPORT/SCHEMA/DB_LINK
Processing object type DATABASE_EXPORT/TRUSTED_DB_LINK
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/SEQUENCE
Processing object type DATABASE_EXPORT/SCHEMA/SEQUENCE/GRANT/DE_S_SEQ_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/DIRECTORY/DIRECTORY
Processing object type DATABASE_EXPORT/DIRECTORY/GRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/CONTEXT
Processing object type DATABASE_EXPORT/SCHEMA/DE_PUBLIC_SYNONYM/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/SYNONYM
Processing object type DATABASE_EXPORT/SCHEMA/TYPE/TYPE_SPEC
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/DE_SYSTEM_PROCOBJACT/DE_POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/PRE_TABLE_ACTION
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/GRANT/DE_S_TABLE_NOTWGO_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/INDEX
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/CONSTRAINT/CONSTRAINT
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/COMMENT
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/PACKAGE_SPEC
Processing object type DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Processing object type DATABASE_EXPORT/SCHEMA/FUNCTION/FUNCTION
Help me.

Export is Still in progress
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Job: SYS_EXPORT_FULL_02
Owner: EXPTEST
Operation: EXPORT
Creator Privs: FALSE
GUID: 94AB0C8AA824462AA96C8481CF0F676F
Start Time: Friday, 04 May, 2012 10:18
Mode: FULL
Instance: curentdb
Max Parallelism: 1
EXPORT Job Parameters:
Parameter Name Parameter Value:
CLIENT_COMMAND userexp/********@curentdb full=Y directory=test_dir dumpfile=curent10g.dmp logfile=expdpcurent10g.log;
DATA_ACCESS_METHOD AUTOMATIC
ESTIMATE BLOCKS
INCLUDE_METADATA 1
LOG_FILE_DIRECTORY TEST_DIR
LOG_FILE_NAME expdpcurent10g.log;
TABLE_CONSISTENCY 0
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Dump File: C:\ORACLE DMP\CURENT10G.DMP
bytes written: 4,096
Worker 1 Status:
State: EXECUTING
Object Schema: PUBLIC
Object Type: DATABASE_EXPORT/SCHEMA/PACKAGE/GRANT/DE_S_PACKAGE_OWNER_OBJGRANT/OBJECT_GRANT
Completed Objects: 1
Total Objects: 1
What Does it mean, Suggest.

Transaction takes more database time

Hi friend,
Today morning one user excute transaction CK40N shows more time at the database level.It impacts on performance of our production system.Now i want to investigate why this transaction takes more database time .
I want to compare with last 2 months database time taken by excuting this transaction (CK40N) in the same date and time.
i tried but i am unable to get i checked in st03n,stad.
can any body can help me how to find out.
Best Regards,
kiranchaitanya.
mine environment:-
ECC6.0,
IBM-AIX-5.3
ORACLE-10.0.2.0.2

Dear Kiranchaitanya
Regardless of the issue I recommend implementing BR*Tools 7.10 and SAP note [Note 1020260 - Delivery of Oracle statistics|https://service.sap.com/sap/support/notes/1020260] if not yet performed.
Check the following:
- Oracle statistics are created daily
- Oracle system statistics are created quarterly (or after specific interventions)
- Oracle dictionary statistics are created quarterly (or after specific interventions)
Check your performance details of Oracle (hit cache ratio and so on) to ensure those are correct in DB02 under Performance Overview.
To check the transaction in ST03N go into expert mode and on the left pane under "workload" you can compare by week for example
double-click the week of which you want data. Next go the lower left pane, there you need to db-click on "Standard" under Analysis Views --> Transaction Profile.
Next find or the list so you have your transaction displayed in the list on the right pane.
Repeat these steps for other weeks and compare the data.
Can you tell me how many % of the response time is database time (once you have the transaction on the right pane in ST03N with statistical data, go
to the third tab there called "parts of response time" and check the %DB Time column) ?
Kind regards
Tom

Publishing EJBs takes more time in Oracle Weblogic 10.3 workshop

Hi,
We recently migrated from Weblogic 9.2 to Oracle Weblogic 10.3 workshop.
I have a ejb project which has more than 30 ejb's(both entity and session ejbs).
The problem is: whenever I modify the code inside a method and save, it builds the project automatically. After that when I try to publish the module, it takes around 5 - 10 minutes for publishing.
Points to note are : The ejb I am modifying has reference to other (10 - 20) ejbs. Hence it takes more time for even for single ejb change.
however, when i modify an ejb which has no reference to ejb, takes less time to publish.
My question is : is there a way to reduce the publishing time in this scenario.
Thanks in advance!

There is a special forum for Workshop issues:
Workshop
Try there.

Oracle coherence first read/write operation take more time

I'm currently testing with oracle coherence Java and C++ version and from both versions for writing to any local or distributed or near cache first read/write operation take more time compared to next consecutive read/write operation. Is this because of boost operations happening inside actual HashMap or serialization or memory mapped implementation. What are the techniques which we can use to improve the performance with this first read/write operation?
Currently I'm doing a single read/write operation after fetching the NamedCache Instance. Please let me know whether there's any other boosting coherence cache techniques available.

In which case, why bother using Coherence? You're not really gaining anything, are you?
What I'm trying to explain is that you're probably not going to get that "micro-second" level performance on a fully configured Coherence cluster, running across multiple machines, going via proxies for c++ clients. Coherence is designed to be a scalable, fault-tolerant, distributed caching/processing system. It's not really designed for real-time, guaranteed, nano-second/micro-second level processing. There are much better product stacks out there for that type of processing if that is your ultimate goal, IMHO.
As you say, just writing to a small, local Map (or array, List, Set, etc.) in a local JVM is always going to be very fast - literally as fast as the processor running in the machine. But that's not really the focus of a product like Coherence. It isn't trying to "out gun" what you can achieve on one machine doing simple processing; Coherence is designed for scalability rather than outright performance. Of course, the use of local caches (including Coherence's near caching or replicated caching), can get you back some of the performance you've "lost" in a distributed system, but it's all relative.
If you wander over to a few of the CUG presentations and attend a few CUG meetings, one of the first things the support guys will tell you is "benchmark on a proper cluster" and not "on a localised development machine". Why? Because the difference in scalability and performance will be huge. I'm not really trying to deter you from Coherence, but I don't think it's going to meet you requirements when fully configured in a cluster of "1 Micro seconds for 100000 data collection" on a continuous basis.
Just my two cents.
Cheers,
Steve
NB. I don't work for Oracle, so maybe they have a different opinion. :)

Take up Oracle ERP database responsibilities.

Hi all,
How to take up oracle ERP database responsibilities from old DBA mean to say which aspect should i consider most important.
Thanks.

- A - wrote:
Hi all,
How to take up oracle ERP database responsibilities from old DBA mean to say which aspect should i consider most important.
Thanks.RMAN backups & being able to recover DB

How to integrate 16 more branch in oracle 9i database

Hi,
I have 16 more branches & one corporate office, Oracle 9i database is running all of the offices.
Now I need to make a central database including all branch.
Some one suggest to replicate using materialized view & dblink. how can i make dblink connection, because all branches are not a single network. they are having only a simple internet connection, no real IP is there. Please explain step by step to the total procedure.
Some one tell me to get a real IP in corporate office's database. then all branch's tns file to configure against that real IP. all branch should logon to single database. is it possible ?? if possible pleas explain the procedure....
Thanks

First set all the required parameter .
SQL> alter system set log_archive_start=true scope=spfile;
System altered.
SQL> alter system set log_archive_dest=/oradata/archive scope=spfile;
System altered.
SQL> alter system set log_archive_format=Archive_%s_%t.ARC scope=spfile;
System altered.
Then Shu you DB.
Then Startup Mount
Enable Automatic Archiving.
SQL> alter database archivelog;
SQL> Alter database open;
SQL>archive log list

10.6: Apple and our customers place a high value on simple, refined, creative, well thought through interfaces. They take more work but are worth it. Apple sets a high bar. If your user interface is complex or less than very good it may be rejected

i am newbie in IOS i am web developer
so i use html 5 and i development jquery mobile based application.
in my application i just call view from web.I used objective c webview .
but my application rejected following issues
- Included low resolution/jagged image/s; see screenshot
- Portions of your app loaded, refreshed, ran, and/or responded very slowly.
- Was not optimized to support the device screen size and/or resolution; see screenshot
- Did not integrate with iOS features.
they said your app is slow but app speed is good(you can see here : http://teknonova.com/Map)
they said did not integrate with ios features .yes i just call URL from web view?is it illegal?
and they gave issues screenshot there is no problem with screenshot .it is good : (http://a1523.phobos.apple.com/us/r30/Purple/v4/c3/76/8a/c3768ae0-9b41-820f-9315- 40db2afc57b6/temp..gwvpnmiu.png)
what should i do?
should i delete and add new app?

10.6: Apple and our customers place a high value on simple, refined, creative, well thought through interfaces. They take more work but are worth it. Apple sets a high bar. If your user interface is complex or less than very good it may be rejected
for this problem what is a good solutions, how need to solve our problem, we need to published our apps. so plez telme the solution for this resons

DELETE FROM database table takes more time...

Hi Friends,
The below statement takes more time.
LOOP AT i_final.
DELETE FROM zcisconec WHERE werks = i_final-werks
AND aufnr = i_final-aufnr
AND vornr = i_final-vornr.
ENDLOOP.
Internal table I_FINAL will have more than 80,000 records.
DB Table zcisconec have 4 primary key fields out of 10 fields.
Below 4 fields are primary key fields
WERKS
AUFNR
VORNR
MATNR
Please guide me..How to optimize it?
Regards,
Viji

HI,
Check this one ,
put a break point on that delete statement and add another line of code after, like .... CHECK SY-SUBRC = 0. Now got to debug and stop at the DELETE statement, check the number of records in your DB table, now hit F5 to step to the next statement, now go back to SE16 and refresh, do you see the number change? It should.........if you are selecting the data correctly, make sure that you are getting data into the IT_ table.
DELETE zcisconec from i_final.
CALL FUNCTION 'DB_COMMIT'.
Regards,
Ansari.
Edited by: Ansari Samsudeen on Sep 15, 2009 8:14 AM

Will SP1 take more time to install if we have more databases and/or larger databases ?

We are preparing to install SP1 (CU4 ?) for Exchange 2013 (e2013) on our production system.
We have done that in our test system.
The production system has more databases and more mailboxes and data in each database, than the test system.
Seems like we read someplace that SP1 has an update to the "database schema" (in addition to the AD Schema update).
Thought that this database work might require extra time.
Will the SP1 install run longer because of the larger and more numerous databases ?
Thanks.
=====
tags -- mailbox server, e2013, implement Service Pack 1,

Thanks for the information.
So,...is there a Database schema upgrade as part of SP1 for Exchange 2013 ? (yes or no)
If the answer is "yes", then...
I understand all the mailboxes would be "offline".
But that does not really answer my question.
Just for an example, if they are simply adding one new attribute to the schema, that is probably done in the "schema master", and assuming that field is "null" for all current data, no other work needs to be done, regardless of the number of databases or
the size (or the number of mailboxes).
But let's say that new attribute needs to be "set" based on something in the data, and if it is "per database", that could have an impact, or if it was "per message", ...many messages to evaluate...etc.
I thought maybe some people had real-life experience and would base the answer on what they saw.
--- I assume that is what @CanKILIC above is saying... :-)
Thanks.

Export and import Oracle 10G database

Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
Ron

Do you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
******************************************************************

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Query Takes more Time when i execute from the Instant client.

Hi,
Currently in our Env we have some Queries takes more time when we run from the Instant Client.
System Details
OS=Solaris 10 x86 64bit
Oracle 10.2.0.4
Client Side
$ sqlplus trd_trd_ro/trd_trd_ro@prdba001/TRADE1
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Aug 9 16:26:25 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
SQL> set timing on
SQL> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:01:54.19
SQL> Disconnected from Oracle Database 10g Release 10.2.0.4.0 - ProductionSame Query running on Server Side
^C130-oracle@prdba001 txt: sql
Database: trd_trd_owner/trd_trd_owner@prdba001/TRADE1
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Aug 9 17:15:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
trd_trd_owner@TRADE1> set timing on
trd_trd_owner@TRADE1> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:00:00.12
trd_trd_owner@TRADE1> exitKindly help me what could be the Issues.

Hi Charles,
Thanks for your Quick response.I pulled the info.
sys@TRADE1> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('bpxr7axhxaqvy',NULL,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID bpxr7axhxaqvy, child number 0
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation                       | Name                  | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   1 | SORT GROUP BY NOSORT           |                       |      1 |     21 |      0 |00:00:00.06 |    6121 |
|   2 |   VIEW                          |                       |      1 |     21 |      0 |00:00:00.06 |    6121 |
|   3 |    UNION-ALL                    |                       |      1 |        |      0 |00:00:00.06 |    6121 |
|   4 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.05 |    3073 |
|* 5 |      TABLE ACCESS FULL          | TIBEX_QUOTE           |      1 | 30080 |      0 |00:00:00.05 |    3073 |
|   6 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|   7 |      TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER           |      1 |    971 |      0 |00:00:00.01 |       3 |
|* 8 |       INDEX RANGE SCAN          | TIBEX_ORDER_IDX_OLT   |      1 |    971 |      0 |00:00:00.01 |       3 |
|   9 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 10 |      TABLE ACCESS FULL          | TIBEX_TSTRADE         |      1 |      1 |      0 |00:00:00.01 |       3 |
| 11 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 12 |      TABLE ACCESS FULL          | TIBEX_IOIREQUEST      |      1 |      1 |      0 |00:00:00.01 |       3 |
| 13 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |     126 |
|* 14 |      TABLE ACCESS FULL          | TIBEX_BESTEXREL       |      1 |      1 |      0 |00:00:00.01 |     126 |
| 15 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |    2862 |
|* 16 |      INDEX FAST FULL SCAN       | SYS_C0058325          |      1 |    339 |      0 |00:00:00.01 |    2862 |
| 17 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |      31 |
|* 18 |      TABLE ACCESS FULL          | TIBEX_EDPPULLORDERS   |      1 |      1 |      0 |00:00:00.01 |      31 |
| 19 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 20 |      INDEX RANGE SCAN           | SYS_C0058803          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 21 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 22 |      INDEX RANGE SCAN           | SYS_C0057785          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 23 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 24 |      INDEX RANGE SCAN           | SYS_C0057827          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 25 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 26 |      TABLE ACCESS FULL          | TIBEX_DELETEADMIN     |      1 |      1 |      0 |00:00:00.01 |       3 |
| 27 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 28 |      INDEX RANGE SCAN           | SYS_C0058148          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 29 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 30 |      INDEX RANGE SCAN           | SYS_C0058264          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 31 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 32 |      INDEX RANGE SCAN           | SYS_C0058516          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 33 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 34 |      INDEX RANGE SCAN           | SYS_C0058561          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 35 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 36 |      INDEX RANGE SCAN           | SYS_C0058783          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 37 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 38 |      INDEX RANGE SCAN           | SYS_C0058977          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 39 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 40 |      INDEX RANGE SCAN           | SYS_C0058859          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 41 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 42 |      INDEX RANGE SCAN           | SYS_C0059197          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 43 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 44 |      TABLE ACCESS FULL          | TIBEX_CANCELTRDADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |
| 45 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 46 |      TABLE ACCESS FULL          | TIBEX_BULKCANCELADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
   5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
   8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 1
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
Plan hash value: 1955857846
| Id | Operation                       | Name                  | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   1 | SORT GROUP BY NOSORT           |                       |      1 |     21 |      0 |00:00:00.12 |    8545 |
|   2 |   VIEW                          |                       |      1 |     21 |      0 |00:00:00.12 |    8545 |
|   3 |    UNION-ALL                    |                       |      1 |        |      0 |00:00:00.12 |    8545 |
|   4 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.10 |    5496 |
|* 5 |      TABLE ACCESS FULL          | TIBEX_QUOTE           |      1 | 21056 |      0 |00:00:00.10 |    5496 |
|   6 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       4 |
|   7 |      TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER           |      1 |    660 |      0 |00:00:00.01 |       4 |
|* 8 |       INDEX RANGE SCAN          | TIBEX_ORDER_IDX_OLT   |      1 |    660 |      0 |00:00:00.01 |       4 |
|   9 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 10 |      TABLE ACCESS FULL          | TIBEX_TSTRADE         |      1 |      1 |      0 |00:00:00.01 |       3 |
| 11 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 12 |      TABLE ACCESS FULL          | TIBEX_IOIREQUEST      |      1 |      1 |      0 |00:00:00.01 |       3 |
| 13 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |     126 |
|* 14 |      TABLE ACCESS FULL          | TIBEX_BESTEXREL       |      1 |      1 |      0 |00:00:00.01 |     126 |
| 15 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.02 |    2862 |
|* 16 |      INDEX FAST FULL SCAN       | SYS_C0058325          |      1 |    339 |      0 |00:00:00.02 |    2862 |
| 17 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |      31 |
|* 18 |      TABLE ACCESS FULL          | TIBEX_EDPPULLORDERS   |      1 |      1 |      0 |00:00:00.01 |      31 |
| 19 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 20 |      INDEX RANGE SCAN           | SYS_C0058803          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 21 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 22 |      INDEX RANGE SCAN           | SYS_C0057785          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 23 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 24 |      INDEX RANGE SCAN           | SYS_C0057827          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 25 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 26 |      TABLE ACCESS FULL          | TIBEX_DELETEADMIN     |      1 |      1 |      0 |00:00:00.01 |       3 |
| 27 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 28 |      INDEX RANGE SCAN           | SYS_C0058148          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 29 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
PLAN_TABLE_OUTPUT
|* 30 |      INDEX RANGE SCAN           | SYS_C0058264          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 31 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 32 |      INDEX RANGE SCAN           | SYS_C0058516          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 33 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 34 |      INDEX RANGE SCAN           | SYS_C0058561          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 35 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 36 |      INDEX RANGE SCAN           | SYS_C0058783          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 37 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 38 |      INDEX RANGE SCAN           | SYS_C0058977          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 39 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 40 |      INDEX RANGE SCAN           | SYS_C0058859          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 41 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |
|* 42 |      INDEX RANGE SCAN           | SYS_C0059197          |      1 |      1 |      0 |00:00:00.01 |       1 |
| 43 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 44 |      TABLE ACCESS FULL          | TIBEX_CANCELTRDADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |
| 45 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |
|* 46 |      TABLE ACCESS FULL          | TIBEX_BULKCANCELADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |
Predicate Information (identified by operation id):
   5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
   8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 2
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation                       | Name                  | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads |
|   1 | SORT GROUP BY NOSORT           |                       |      1 |     21 |      1 |00:00:00.13 |    8476 |      3 |
|   2 |   VIEW                          |                       |      1 |     21 |      1 |00:00:00.13 |    8476 |      3 |
|   3 |    UNION-ALL                    |                       |      1 |        |      1 |00:00:00.13 |    8476 |      3 |
|   4 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.10 |    5283 |      0 |
|* 5 |      TABLE ACCESS FULL          | TIBEX_QUOTE           |      1 | 21056 |      0 |00:00:00.10 |    5283 |      0 |
|   6 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      1 |00:00:00.01 |     148 |      3 |
|   7 |      TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER           |      1 |    660 |    150 |00:00:00.01 |     148 |      3 |
PLAN_TABLE_OUTPUT
|* 8 |       INDEX RANGE SCAN          | TIBEX_ORDER_IDX_OLT   |      1 |    660 |    150 |00:00:00.01 |       5 |      0 |
|   9 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
|* 10 |      TABLE ACCESS FULL          | TIBEX_TSTRADE         |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
| 11 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
|* 12 |      TABLE ACCESS FULL          | TIBEX_IOIREQUEST      |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
| 13 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |     126 |      0 |
|* 14 |      TABLE ACCESS FULL          | TIBEX_BESTEXREL       |      1 |      1 |      0 |00:00:00.01 |     126 |      0 |
| 15 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.02 |    2862 |      0 |
|* 16 |      INDEX FAST FULL SCAN       | SYS_C0058325          |      1 |    339 |      0 |00:00:00.02 |    2862 |      0 |
| 17 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |      31 |      0 |
|* 18 |      TABLE ACCESS FULL          | TIBEX_EDPPULLORDERS   |      1 |      1 |      0 |00:00:00.01 |      31 |      0 |
| 19 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 20 |      INDEX RANGE SCAN           | SYS_C0058803          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 21 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 22 |      INDEX RANGE SCAN           | SYS_C0057785          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 23 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 24 |      INDEX RANGE SCAN           | SYS_C0057827          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 25 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
|* 26 |      TABLE ACCESS FULL          | TIBEX_DELETEADMIN     |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
| 27 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 28 |      INDEX RANGE SCAN           | SYS_C0058148          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 29 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 30 |      INDEX RANGE SCAN           | SYS_C0058264          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 31 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 32 |      INDEX RANGE SCAN           | SYS_C0058516          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 33 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 34 |      INDEX RANGE SCAN           | SYS_C0058561          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 35 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 36 |      INDEX RANGE SCAN           | SYS_C0058783          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 37 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 38 |      INDEX RANGE SCAN           | SYS_C0058977          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 39 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 40 |      INDEX RANGE SCAN           | SYS_C0058859          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 41 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
|* 42 |      INDEX RANGE SCAN           | SYS_C0059197          |      1 |      1 |      0 |00:00:00.01 |       1 |      0 |
| 43 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
|* 44 |      TABLE ACCESS FULL          | TIBEX_CANCELTRDADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
| 45 |     SORT GROUP BY NOSORT        |                       |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
|* 46 |      TABLE ACCESS FULL          | TIBEX_BULKCANCELADMIN |      1 |      1 |      0 |00:00:00.01 |       3 |      0 |
Predicate Information (identified by operation id):
   5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
   8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
PLAN_TABLE_OUTPUT
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
249 rows selected.

Oracle XE database take more place everyday

Similar Messages

Maybe you are looking for