Replication in SAP R/3 on SQL server

hi,
We want to read of R/3 data for some legacy system. I know that there are many ways for this matter but is there any limitation for one-side replication of data in SAP R/3 to a middle ware database?
We use MS SQL server as R/3 RDBMS.
Thanks a lot in advance,

I would not set up traditional replication on the SAP DB.
Instead, it would be better to setup either a DTS package (on SQL2000) or an Integration Services package (SQL2005) to collect the data via direct read query.
We have several 3rd party tools that we pull data directly from the DB for, but make sure user has read-only access to the data so that the developer who writes the code cannot make any changes by mistake.

Similar Messages

RSA1 DB Connection from SAP BW to external SQL Server databas.

Hello,
I am trying to connect our SAP BW system with SQL Server Source System through DB Connect in transaction RSA1.
Our BW system is running on Windows and MaxDB platform, therefore have I already added the latest dbmssslib.dll library to the kernel for SQL Server.
But the connection does not work anyhow, I recieve the error "Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does > exist or access denied." and I am quite sure that my input parameters are correct.
Therefore I wonder if someone has run into a similar problem and what the problem could be?
Best Regards,
Niklas Sandstedt

Hi,
I am sorry that my case was assigned to wrong forum.
That should now have been corrected, however my problem still remains unsolved in one of our systems.
I found note 178949, which fixed the problem in one system. But even though the system setup seems to be identical, the two systems appears different.
The following has been done for both systems:
1. Upgraded kernel to 701 version 111 and added dbmssslib.dll and dbmssslib.pdb files
2. Created Logical system in BD54.
3. Tried to create DB connection in transaction DBACOCKPIT.
In the third step, the setup fails and I receive the following error message when I test the connection:
Database error -1 at CON > [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not > exist or access denied.
Database error -1
All profile parameters AL11-directories also seems to be correct in both systems, so both should find the dbmssslib.dll file.
One issue that I see is in DBACOCKPIT, the checkbox for "SAP Systems with basis release" is unchangeble and marked. This however, I think was changed in the other system automatically when the connection was established successfully.
Has anyone run into the same problem?
Best Regards,
Niklas Sandstedt

What is the difference in Webintelligence while using SAP BW or MS SQL Server

Hi Experts,
What is main difference in using SAP BW and MS SQL server in SAP BO while creating Reports using Web intelligence, Crystal reports. I want to know mostly on Report Level difference.

Hi,
I Have not used Crystal with Ms SQL server but webI i can tell .
SAP BW is OLAP Layer .
M S SQL Server is Database .
You can Edit your Web Intelligence Query SQL Code in MS SQL Server .
Not in SAP BW .
Combined Query is Disable in SAP BW but it is available in SQL Server .
Performance wise SAP BW Query is better because it calculates every thing in SAP BW & gives us Required Out .

Can't find SAP Tools for MS SQL Server

Hello all,
I need to do an dettach/attach procedure, and need this tool. As Note 683447 says, can't find the download tool for this tool.
http://service.sap.com/msplatforms
Could you give me a hint please?
Thanks a lot.

Hello Benjamin,
following this note: 683447 - SAP Tools for MS SQL Server I could see these options:
Thanks a lot and best regards

Dbcon connection from sap db2 to external sql server

Hi ,
I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
"Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'." [dlux.c 445]
M {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
B *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my db is DB2 can we download dbmssslib.so this library and load in kernel file? Is it will work?
Regards,
Rai

Hi Rai,
This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
For more details on configuration and troubleshooting refer to below SCN document
How to access an external Microsoft SQL Server database
Hope this helps.
Regards,
Deepak Kori

SAP Crystal Report using SQL Server Authentication and Windows Authenticati

I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title></title>
</head>
<body>
    <form id="form1" runat="server">
    <div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
    </div>
    </form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
    private const string PARAMETER_FIELD_NAME = "city";
    private ReportDocument customersByCityReport;
    private void ConfigureCrystalReports()
        ConnectionInfo connectionInfo = new ConnectionInfo();
        connectionInfo.ServerName = @"WKM1925-PCWKM1925";
        connectionInfo.DatabaseName = "Northwind";
        connectionInfo.UserID = "sa";
        connectionInfo.Password = "sysadmin25";
        SetDBLogonForReport(connectionInfo);
    private void SetDBLogonForReport(ConnectionInfo connectionInfo)
        TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
        foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
            tableLogOnInfo.ConnectionInfo = connectionInfo;
    private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
        ParameterValues currentParameterValues = new ParameterValues();
        foreach (object submittedValue in arrayList)
            ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
            parameterDiscreteValue.Value = submittedValue.ToString();
            currentParameterValues.Add(parameterDiscreteValue);
        ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
        ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
        parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
    protected void Page_Load(object sender, EventArgs e)
        customersByCityReport = new ReportDocument();
        string reportPath = Server.MapPath("customersByCity.rpt");
        customersByCityReport.Load(reportPath);
        ConfigureCrystalReports();
        ArrayList arrayList = new ArrayList();
        arrayList.Add("paris");
        arrayList.Add("Madrid");
        arrayList.Add("Marseille");
        arrayList.Add("Buenos Aires");
        arrayList.Add("Sao Paulo");
        ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
        SetCurrentValuesForParameterField(customersByCityReport, arrayList);
        CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help me

Hello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don

Sap b1 compatibility with SQL server 2008

Hello Experts
i have installed Sql Server 2008 in my system
and when installing SAP Business One server setup
the database selection is not coming .Where we can select MSSQL 2008 am not getting that selection of sql .
Thanx in advance
Regards
Krishna Vamsi

hi krishna
if u are nor getting the selection for sql i would like to ask u whether u can work on sql or not there could be one easy way out it has to be a problem with the installation of sql is it possible for you to reinstall sql that would solve problem.
Regards,
Manish

Data transfer from SAP R/3 to SQL Server

Can anybody help me. I will explain the scenario.
If there is any change or update in the HR master data like creation of new personnel number or deletion of personnel number and change of cost center etc., should immediately get reflected in the SQL server. Can you please help me ASAP in solving this. Thanks in advance.
Best Regards
Bhagat.

Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind.

Installing SAP R/3 with SQL Server 2005..

Hi,
Microsoft is about to release "SQL 2005" in Nov05. Has anybody in here thought of installing/upgrading SAP on MS-SQL's latest version of the database server. On doing some research on the net I noticed that Microsoft has already upgraded their SAP R/3 environment to the beta edition of SQL Server 2005. I did not find any information on SAP having certified SQL Server 2005 yet.
Do we have to wait till ECC6.0 or whatever the new version of ECC would be to leverage the SQL Server 2005 D/b ?
Any thoughts/information on the readiness of SQL Server 2005 for SAP R/3 would be appreciated.
Jay

Hi Jay,
Past experience says SAP won't support a new platform (e.g. DB, OS, etc) until they have had a chance to test it. Your official SAP document for what is supported is in the Product Availability Matrix. http://service.sap.com/pam
With that said, that doesn't mean that you can't try it out. Of course not in a test environment. You get some very good learning experiences from trying. But don't enter a customer message about a non supported platform.
Good luck,
John

Replication Configuration issue after migrating from SQL Server 2005 to SQL Server 2008 R2

Hi All,
This weekend we have migrated one of our Core system from SQL Server 2005 SP3 to SQL Server 2008 R2 SP2. Migration went successful. However when we are trying to Configure transaction replication we are getting below Error:
Msg 21854, Level 16, State 1, Procedure sp_MSrepl_addarticle, Line 573
Could not add new article to publication 'abc' because of active schema change activities or a snapshot is being generated.
Background:
Database compability Changed from 90 to 100.
A quick Help would be appreciated.
Best Regards - Viral
Thanks - Viral

Is a snapshot being generated? the message seems to indicate one is.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

SAP List of Supported SQL Server Service Packs and Cumulative Updates

Does SAP provide a list of SQL Server Service Packs and Cumulative Updates that will work with BPC 7.0 and 7.5? I see that CU 12 is out for SP1 and CU 2 is out for SP2. I would like to know if I can move the SP2 CU2 or SP1 CU12. My install docs are outdated specifying SP1 CU6.
Any direction is appreciated.
Joe

Hi,
Please take a look at the below list of the supported OS: This excerpt is from the installation guide.
SP04 or later: Windows Server 2008 R2 Standard or Enterprise Edition with or without Hyper-V
Windows Server 2008 Standard or Enterprise Edition with or without Hyper-V, or
Windows Server 2008 Data Center with or without Hyper-V
Windows Server 2003 Standard or Enterprise Edition SP2
Windows Server 2003 Standard configured on the SQL database or OLAP server components only
Windows Server 2003 R2 Standard or Enterprise Edition SP2
SAP recommends using Windows Server 2008 64 bit over Windows Server 2003 64 bit. Otherwise, supportability is limited.
I am not sure what did you mean by the front end. Having said that, 32 bit is supported both on the server and the client machines.
Hope this helps.

How to disable the archive logs in SAP IDES(Windows) using SQL Server

can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya

SAP BOBJ connection with SQL server 2008

HI Gurus
I want to install bobj server on a server that already have SQL server 2008 installed on it, I have few confusions as this is my first time installation, I hope you can help me.
1. Since SQL server is installed on the same machine where I have to install bobj, do I need to create an ODBC connection. Note that O/s is windows server 2008.
2. What kind of other softwares or tools do I need to istall on the server to connect bobj server to sql server in order to crate universe on sql database, for example, Microsoft IIS and ASP.NET, .NET frame work etc etc or are these installed by default automatically when sql server or bobj server installed on the machine.
3. is there any checklist I need to go through before I start with the installation of bobj server.
4. Last but not the least but very important, does anyone has step by step guid with screen shot to thjis installation connectivity.
I would appreciate your feedback and respoce.
Regards.

> what do you exactly mean my set---next next and finish, I think if eveything is setup already such as database server, app server, dev qa and prod and sizing , users etc etc then i guess installing bobj is pretty simple
> , all i need is a odbc connection to set up, i am not sure what kind of problems should i be anticipating.
Read the installation guide - and figure yourself if you consider it "easy".
> Also I am not talking about admin part, universe design and report development ,its totally seperate issue, I was just concerned about installing a bobj tool on the server and to connect it to sql server.
> Do you have any thoughts on this, would appreciate
As said - read the installation guides
There's a reason why they are there and why they are so big.
All I can say that it is not as easy as doubleclicking a "setup.exe", pres "next", "next" and "finish".
Did you check the guides?
Markus

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR      2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE      2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
    function:CallTheLogInquirer
is validator: true
WARNING    2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE      2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE      2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
            CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </p> </body></html>
TRACE      2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005

Hi All,
We are trying to create a replication between Sql server 7.0 data to SQL server 2005 data . We tried to create a local subscription in Sql server ,when tried to connect to publisher running in Sql server 7.0 it is showing an error message
like "This Sql server vresion(7.0) is not supported" .
Could any one please help us with this issue ?
Thanks
Sandy

Hi CRM_Learner,
SQL Server version 7.0 Service Pack 4 (SP4) is the earliest version that can participate in a replication topology with SQL Server 2005. We need to verify the version of SQL Server. If you configure transactional replication with updating subscribers,
for a SQL Server 7.0 Publisher, only SQL Server 7.0 Subscribers are supported. SQL Server 7.0, 2000 was out of support in the SQL Server Forums. I suggest you install SQL Server 2005 or later version to configure the SQL Server replication.
For more information, there is a detail about using multiple Versions of SQL Server in a replication topology.
http://technet.microsoft.com/en-us/library/ms143241(v=sql.90).aspx
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Replication in SAP R/3 on SQL server

Similar Messages

Maybe you are looking for