OracleDBConsole service cannot start

Hi all,
I installed Oracle 11g software on a Windows XP SP2 machine with 1 GB RAM.
I then used DBCA to create a db and in the end of the db creation the following error raised:
error screenshot: http://www.ahmedbaraka.com/temp/error.jpg
logfile URL: http://www.ahmedbaraka.com/temp/emConfig.log
After many attempts to use emca to create the EM repository, I noticed the problem is in starting the OracleDBConsole service. This service cannot be started by Windows. When I refer to the Even Log, I see the following error: "Process exited abnormally during initialization."
<b>Did any one face this problem when installing Oracle 11g? Is there any suggestiong to try to fix it?</b>
Thanks in advance.

Hi all,
I installed Oracle 11g software on a Windows XP SP2
machine with 1 GB RAM.
I then used DBCA to create a db and in the end of the
db creation the following error raised:Sorry I have not checked your screen shots. My question is did you install 11g with the standard database and then created a new DB (second DB) with DBCA or you installed Software Only?
One thing to check is whether you have got 2 listeners. The first listener would be created successfully, but the second will fail because Oracle will try to allocate the same port it gave to the first listener to the second listener.

Similar Messages

OBIEE 11g opmnctl services cannot start (ping failed in ready callback)

Hi,
The BI server is up and running
The platform is Linux, searching forums it's due to /etc/hosts and it is defined as
127.0.0.1 localhost.localdomain localhost
127.0.0.1 <servername>.<domain> <servername>
All OPMN services cannot start with error messages (ping failed in ready callback).
Any idea is highly appreciated !!!
Thanks.

Hi,
Make sure static ip r u using? If u used to installed dynamic
Ip it throw this kind off issue . I have face this same issue in obiee11.1.1.3 with dynamic ip address
Note: u shoud use static ip ( configure look back adopter )
Thanks
Deva

Secure Socket Tunnelling Protocol Service cannot start

I'm having problems with my mobile broadband since the Dec 2011 updates cycle.
Hardware: ASUS F6VE laptop, core2duo, 4 gig ram, ATI graphics
OS: Microsoft Windows 7 Home Premium 32bit SP1 completely updated to Dec 2011. This install was originally Vista Home Premium 32bit and upgraded to Win7.
AV: Microsoft Security Essentials
The symptoms:
Error 711:" The operation could not finish because it could not start the Remote Access Connection Service manager in time."
Rasman cannot start because Secure Socket Tunnelling Protocol service cannot start.
The system log is now filling up with:
7001: "The Remote Access Connection Manager service depends on the Secure Socket Tunnelling Protocol Service service which failed to start because of the following error:
The operation completed successfully."
and
7036: "The Secure Socket Tunnelling Protocol Service service entered the stopped state."
Attempting to open the properties of the dialup adaptor gives an error dialog box:
Title:"Network Connections"; Message:"An unexpected error occurred." Removing the existing connections and trying to reinstall the modem made no difference.
The issue is specific to the dial up / mobile broadband though as the Ethernet still works fine. The mobile broadband stopped working when I let the December 2011 Windows Updates install. It was fine till then - I'd been using it all day before applying the
updates that night. The only odd thing that I will say is that for a few weeks now, occasionally Windows would occasionally not detect the display, keyboard and track pad on first boot, but restarting generally was successful. Then just when I started up the
PC to download the hot fixes, the Windows detected "new hardware" and reloaded drivers for the ACPI x86 based PC (i.e. the HAL driver) and a few others that I wasn't quick enough to note. I've never seen that happen before, but now the hardware is being set
up correctly each boot and seems to behave apart from SSTP service is broken.
Rolling back to a previous restore point did not fix it, nor did uninstalling the hotfixes.
I've tried pretty much every fix that I have been able to find and none are successful.
The "fix" by removing sstpsvc as a dependency in the RasMan registry key was unsuccessful.
The "fix" by deleting the contents of %system32%\Logfiles\WMI and %system32%\Logfiles\WMI\RtBackup was unsuccessful
The "fix" by reregistering netshell.dll and ole32.dll successfully registered for the former, but not ole32.dll. The problem was not fixed.
"sfc /scannow" only finds the autochk.exe hash issue, which has been a present for some time.
I will mention that I had VMWare Workstation 7.1.4 installed. I tried to uninstall it a while back, but it broke another program that I need - probably something to do with the sentinel driver. I have now uninstalled VMWare and reset the TCP/IP stack without
issue. The problem was not fixed though.
I really don't want to reinstall as it's taken me quite some time to get it set up as I want it

You don't need to start the services you just need to make sure that the startup type is set to manual.
The service itself will start when needed.
This message here is not an error or problem, it is just telling you that service is not being used by anything on your computer.
SSTP: "The Secure Tunnelling Protocol Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs."
What exactly are you trying to do that requires this service (SSTP)?

HTTP Server error - service cannot start

I have installed Oracle 9i on NT. After installation when tried to start the HTTP Server it gave an error cannot start. Any idea how to solve this error?
Thanks
Alina

start the services
Control Pannel,Setting,Administrative Tools,Services
and start the HTTP Services.
if already started.
Start Form Builder and
then edit -->prefrence-->runtime-->set default,
change port from 8888 or 8889 to 80 or set port of his computer.
any other solution is also avilable. if problem not solved. againt contact to
[email protected]

FE service cannot start after the update was done

Hi,
We are installing lync 2013 standard Edition server on windows server 2008 R2.
Certificates are public ones and they are from Digicert.
We managed to go to step 3 (certificates part is ok).
We cannot start the FE service.
We tried everything regarding resetting fabric state, registrat etc.
We made the update with the newest patch (February 2015).
FE cannot be started:
We still got the errors:
"Failed to sync data for Routing group {19F4D868-D0A1-53D8-BE89-1BFA7BDE645E} from backup store.
Cause: This may indicate a problem with connectivity to backup database or some unknown product issue.
Resolution:"
"This process was not able to update its health status
The Audio-Video Conferencing Server failed to send health notifications to the MCU factory at.."
and so on...
as could be seen under link: http://troubleshootinglync.blogspot.com/2014/03/lync-2013-front-end-service-wont-start.html
Any idea what could be wrong?

Hi iron_folower,
You can follow the steps below to troubleshoot your problem:
1. Install the Root Certificate and the Intermediate Certificate from Digicert.
2. From:
https://social.technet.microsoft.com/Forums/lync/en-US/506821e2-d3fe-42bd-a6dc-daed6c5f0df6/the-audiovideo-conferencing-server-failed-to-send-health-notifications-to-the-mcu-factory-at?forum=ocsconferencing
Try to create the REG key:
HKLM\System\CurrentControlSet\Control\SecurityProviders\SCHANNEL and create a dword entitled
Sendtrustedissuerlist with a hax value of 0.
3. Reinstall the base OS features:
Import-Module ServerManager
Add-WindowsFeature Web-Dyn-Compression,desktop-experience,RSAT-ADDS,Web-Server,Web-Scripting-Tools,Web-Windows-Auth,Web-Asp-Net,Web-Log-Libraries,Web-Http-Tracing,Web-Stat-Compression,Web-Default-Doc,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Http-Errors,Web-Http-Logging,Web-Net-Ext,Web-Client-Auth,
Web-Filtering,Web-Mgmt-Console,Msmq-Server,Msmq-Directory
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Oracle Forms Server Service cannot start by scripts (windows2k)

We have a Portal & Application Server installed (Forms&Reports 6i).
Server is Windows2000.
I have to start Oracle Forms Server service by scripts, when i manually start the process by pressing start or stop, it works & asks for nothing.
but when i write a script to stop & start oracle forms server , it stops by script.
but it fails to start & says FRM-60009 : ifsvr60 correct usage : -install [service name] exc..... so service doesnt start but when i go to services & start it manually by presing start , it starts. I dont want to install a new service just stop & start the engine.
How can i start the forms server service by a script ? (any of known commands or a way to Oracle forms server service to start by scripts ?)
Thx for Help..

Hi
Have you checked that the rpd file still exists in the Repository folder? Did you leave it in a consistent state? assuming the paint.rpd is still there, double click it and see if you can open it, if so run a consistency check.
Rgds
Ed

Sharepoint Foundation 2010 - Search service cannot start

Hi,
I'm trying to start the Search Service on SharePoint Foundation 2010 SP2, but I get the following error:
Could not access the Search administration database. A generic error occurred while trying to access the database to obtain the schema version info.
However the search database is well created during the process and I've checked that Shared Memory is enabled for SQL Native Client.
Can you please suggest me on this
Thanks

Hi
Alemaitre,
If Shared Memory is enabled can you try below article
http://svengillis.blogspot.com/2011/09/could-not-access-search-administration.html
http://blog.arjanfraaij.com/2012/06/could-not-access-search-administration.html
or if this is the problem after installing any SP / CU then make sure you have successfully ran PSConfig on all servers
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

IChat Service Cannot Start after 10.6.6 Updates

Hi,
My Mac Mini Server was working perfectly until I updated 10.6.6. All services are running except the iChat service. There is a series of error message in the log.
Any help? I have been searching everywhere but cannot find any solutions.
Thanks in advance.

Hi Tim,
I have a look at the topic "cannot log into iChat" post but this is not related to mine. My problem is very similar to some of the topics posted like "iChat server issues".
I have actually reinstall the whole server again. Checked all the services are running well (including the iChat service). Then, I run the Software Updates and the system updated with 10.6.6. Then, I restarted the server and the iChat service stopped now. The rest of the services are still running ok.
I suspect the 10.6.6 update has changed something and cause the service to stop.
Hope the information is sufficient. Thanks in advance.

NQServer Error OBIPresentation service cannot started.

Hi All,
OBIPresentation service can not started.
I have a error message as below at NQServer log file;
[2013-04-23T23:12:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004qknFXoTF5uX^5xVH7iW0002z4000001] [tid: 44d7f940] Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .
[2013-04-23T23:12:59.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004qknFXoTF5uX^5xVH7iW0002z4000001] [tid: 44d7f940] [nQSError: 43126] Authentication failed: invalid user/password.
[2013-04-23T23:13:07.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004qknGGrHp5uX^5xVH7iW00032O000001] [tid: 40b05940] Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .
[2013-04-23T23:13:07.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004qknGGrHp5uX^5xVH7iW00032O000001] [tid: 40b05940] [nQSError: 43126] Authentication failed: invalid user/password.
And I wrote error message as below at sawlog file;
[OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:698
Location:
saw.sawserver
ecid:
[2013-04-23T23:13:06.000+03:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services (OBIPS) 11.1.1.6.0 (Build 120104.0800 64-bit) are starting up.[[
File:sawserver.cpp
Line:451
Location:
saw.sawserver
ecid:
[2013-04-23T23:13:07.000+03:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password.
Can you help me?

Make sure your BIPlatform schema user/passwords are valid and try to restart box.
Edited by: Srini VEERAVALLI on Apr 23, 2013 3:48 PM
Update on this to get reply for new posts
Edited by: Srini VEERAVALLI on May 15, 2013 8:00 AM

IChat Service cannot start anymore.

About 2 months ago after i removed the iChat service i renamed my harddrive from HD 2 to HD2 (without the space) because of certain problems. Today i wanted to install the iChat service again but it won't start due to many problems. I think the reason is it still looks for it's files on HD 2. I don't know if there's anything i can change.
For instance, it can't find the /etc/jabberd/router-filter.xml .. but the file is there, just not on HD 2 but on HD2.
Anybody knows how to change this ? Maybe a pref or config file somewhere ?
Thanks.
Arno

When you say you removed it, did you delete the files?
If you did and you added them back, I suspect they have the wrong owner.
They should be _jabberd.

Cannot start SAP B1 DI Proxy Service

Hi,
After i restart my machine, my SAP B1 DI Proxy Service cannot start.
Even i go to services.msc to start this DI Proxy Service manually, a message appear as per below :
" The SAP Business One DI Proxy Service service on local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs"
Please advice how to start this DI Proxy Service ?
Thanks a lot.
Regards
Sam

You do not have to re-install everything. It's enough to run the integration package from your installation media and it will perform an repair.
You might need to re-activate the mobile package if you are using that one after the repair is finished.
Br
Anders

Win2k cannot start oracle services

Hi,
Usually, our oracle servers can start up autometically
when the machine start up.
Just now, oracle services cannot start. I try use
start->control panel->administrator tool-> services to
start oracle service, it gets errors as following:
could not start the OracleOraHome90TNSListener service on
local computer.
Error 5: Access is denied.
Then I try to use "lsnrctl start listener"
I got following errors:
Failed to start service, error 5.
TNS-12536: TNS:operation would block
TNS-12560: TNS:protocol adapter error
TNS-00506: Operation would block
32-bit Windows Error: 997: Unknown error
I check listener log file, no new message is add to it.
My OS is window 2000 professional.
Oracle server version: 9.0.1.1.1
Thank you for some advice.
Julie

Hi,
I try to fix it by change log on setting by
setting the oracle service as 'this account' and
fill in account and password with system administrator
account information. Then all oracle services can work
properly. But with this setting the web application which
connect oracle database cannot login to database.
It may be the registry database of the machine get
corrupted.
How can I delete all oracle services and recreate the
them again, then will re-register the service information?
By the way, all other services in system are log on as
localsystem account, only oracle services does not allow
me set up as localsystem account, if I did that way, oracle service will not start and complain "error 5:
access is denied"
Thank you for give me some guide lines.
Julie

HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

ICM services not starting up due to logon failure

Hi,
I have UCCE 8.5.3 in my setup as duplex mode as Progger A and Progger B and AW/HDS on another server.Every time if i cycle or restart the logger and AW services an error pops up - Services cannot start up due to Logon failure. I have checked ther services account manager and its in default ICM domain account and the connection is healthy. Every time i have to edit the service account to start the Logger and AW services.
Can any one help me on this.
Thanks,
R

Hi Rahul,
Try using local system account rather than Domain user account as shown below:

Cannot start services

Hi All,
I want to update the SCVMM R2 to roolup 5, I've installed kb3023195_vmmserver_amd64 and kb3023914_AdminConsole_amd64
but no change and services SCVMM can not start.
this is log event viewer :
  <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-17T03:19:51.000000000Z" />
   <EventRecordID>3096</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KRSSCVMMSVR01.kairos-it.com</Computer>
    <Security />
</System>
<EventData>
    <Data>Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)</Data>
</EventData>
</Event>
Any idea?

Hi Sir,
Did you try to roll it back to UR4 ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

OracleDBConsole service cannot start

Similar Messages

Maybe you are looking for