Order combination(mill product) to be used in normal production environment

Hello All,
Can you please tell me whether we use can use order combination fuction from Mill products in normal manufacturing environment. if so can any one tell me what are the seeting we have to do. When i am trying to do it is giving me a error on the controlling side. Any help will be much appreciated.

Jags,
If you are talking about capacity calculation while creating/releasing the production order, then that can be stopped through Config settings for the checking control (OPJK). In this tick the "No Avail check" under Capacity availability section for 1 and 2 business function.
Try this and revert back.
Swapnil

Similar Messages

  • I have buy a CS6 Master collection before,but i have reset my computer yesterday.i forget to deactivate the product, so i can't activate the product now to use the full product?

    why did it happen?

    You are allowed to have two activated installations, so if you already had two activations in use then you cannot actiovate a thrid unless you deactivate one of the other two.  If you only had one activation used up then you should still be able to activate a second installation.
    You should contact Adobe support and have them deactivate the original one that you forgot to.
    Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • Order combination in IS MILL

    Dear support,
    I will explain my business scenario.
    My client wants to convert the planned order in to partial production
    Order then he wants to combine with another production order through the Order Combination concept(IS MILL)
    For ex
    Sales order no 123 with the line item 10 has the qty of 100 kg.
    Sales order no 456 with the line item 10 has the qty of 200 kg.
    After MRP run, the planned orders are generated with 100 and 200 kg.
    But my client wants to combine partial production qty as 50 kg from
    Sales order no 123 and partial production qty as 100 kg from sales Order no.
    This can be done only by entering the Order no in the MILL_OC
    Now I got 2 production orders with 50 and 100 kg, which was in the CRTD status.
    When I enter 2 production orders in the above transaction, am getting the error has u201CNO ORDERS SELECTEDu201D
    Note:
    1. I can able to achieve the same, if I enter the Planned order no in MILL_OC
    2. We are in ECC DIMP 604(Hence we can't able to apply the sap note 1070147
    Pls help
    With Regards
    Sridhar.R
    Edited by: Sridhar Rangasamy on Apr 2, 2010 1:10 PM

    Dear,
    Order combination via the order combination you convert an item for a sales order into a production or process order.
    In the combination, when you use a selection profile to create the combined order, the system uses the order type from the selection profile: Production -> Shop Floor Control -> Master Data -> Order -> Administer selection profile for the combination.
    For the order combination,  selection profile  from the reference order if you do not use a selection profile.
    When you create a combination, the system provides a flag "Select all" (F9) and reference order.
    Please check your order type dependent parameter and selection profile.
    Please refer this blog for details,
    /people/rupesh.brahmankar3/blog/2009/08/03/combining-production-and-process-orders-with-batch-production
    Regards,
    R.Brahmankar

  • Using bapi_po_create1 to create PO with return item - Order Combination

    Hello,
    There's a shipping tab that appears in a purchase return item, and in it there's a flag called Order Combination.
    Only i can't seem to find a way to change that flag using this BAPI, nor using bapi_po_change.
    Any ideas?
    Thank you in advance.
    Duarte

    Hi
    Its a setting that you maintain in the customer master reord that defaults it.
    So if you want this to be flagged for some vendors and for some no flag the you need to maintain accordingly in the Customer master data  - Sales are data  Shipping tab
    If you want it to be maintained through BAPI then populate the same in  POSHIPPINGEXP structure
    Thanks & Regards
    KK

  • Regarding DIMP - order combination

    Hi,
    We are using 'DIMP(600-11)'.
    While executing t-code mill_oc for order combination, system is not selecting data if the integration model for the material is active.
    If I de-activate the material integration model then system is selecting the data.
    Please let me know if anything is missing and further details required.
    Regards,
    Yogesh

    The system checks if a product is integrated to APO. If it is, you cannot execute an order combination because mill order combination is not integrated with APO.
    If you want to use mill order combination and APO please contact SAP Custom Development, they can help you to activate the solution.

  • Report to Generate Materials Used for the Production of FG/SFG Materiak

    Dear Experts,
    I am working for a Cement Factory. CLINKER is a SFG used for the production of FG Cement.
    RMOPCK1 and FINECOAL are another SFG used for the Production of CLINKER
    RMOPCK1
         +               = CLINKER + (Different Materials) = CEMENT
    FINECOAL
    For CLINKER we will create process order every month similarly for RMOPCK1 and FINECOAL.
    RMOPCK1 is using 5 Raw materials and FINECOAL is using 1 raw material
    Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 = RMOPCK1 and
    Rawcoal = FINECOAL
    All the raw materials, SFGs are used for creating different variety of cement.
    I want to know for a certain period how much is the CLINKER produced and How much is the raw materials used for producing the CLINKER.
    When i try through KOB1 with the process orders for CLINKER it is giving me total usage ofr RMOPCK1 and FINECOAL for producing the CLINKER.
    I Want to know for ex:
    the quantity of raw materials (Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 )used for producing ex: 1000 TON of CLINKER.
    Please help. Thanks
    Edited by: simonjohn on Oct 9, 2011 6:46 PM

    Thanks

  • Create Sales Order With Reference to Billing Document Using BAPI_SALESORDER

    Hi,
    How can i create a sales order With Reference to Billing Document Using BAPI_SALESORDER_CREATEFROMDAT2?
    Thanks in advance,
    Alejandro.

    I have to create sales order with reference to existing billing document. I have tried to following bapis.
    1. BAPI_SALESORDER_CREATEed
    I have successfully created document with following details.
    -->ORDER_HEADER_IN:
    DOC_TYPE =                  ZRK
    SALES_ORG =              3000
    DISTR_CHAN   =            00
    DIVISION =                    00
    ORD_REASON =            100
    SD_DOC_CAT   =          L
    CURRENCY       =         EUR
    REF_DOC          =         100000028
    REF_DOC_CA    =         M
    -->ORDER_ITEMS_IN:
    ITM_NUMBER    =           000010
    MATERIAL          =          701791
    TARGET_QTY     =          0000000001000
    CURRENCY        =          EUR
    REF_DOC           =          100000028
    REF_DOC_CA     =          M
    -->ORDER_PARTNERS:
    PARTN_ROLE      =          SP
    PARTN_NUMB      =         W12001
    COUNTRY             =         NL
    by providing this input i am able to create the document but it is not picking up the net value. so i have passed some extra paramters in  ORDER_ITEMS_IN
    COND_TYPE          =        PNET
    COND_VALUE        =        14,56
    COND_D_UNT        =         PC.
    folowing error is occured: Condition PNET is missing in pricing procedure A V Z0000.
    is it something related to configuration problem?
    2.BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2
    I have used same test data that is used for BAPI_SALESORDER_CREATEFROMDATA (where in i coudl succefully create doc). but here i encounterd following error.
    Unpermitted combination of business object BUS2032 and sales doc. category L.

  • Sales order stock should post in unrestrcited use stock

    Hi
    We have MTO and MTS both scenario. Now, for SFG materials we produce through CIR in MD81. Hence, the planned order -> process orders are generated after MRP run has reference of sales order.
    Our all SFG products are Auto Goods receipt through COR6N T-code. But, our scenario is for these CIR requirement all process orders stock goes to sales order stock. We can't use these sales order stocks in MTS or, other MTO FGs.
    Hence, we want whenever process order confirmation we execute in COR6N, the stock should not be posted through 101E and later we are doing 411E. Rather we want in COR6N the stock should go to unrestricted use stock.
    What are all config settings or, processes are there to satisfy our requirement. Also, what can be negative impact for that.
    Please suggest.
    Thanks,
    Susanta

    If the need is to build SFG stock as unrestricted stock, then why are you placing CIR & planning them in sales order segment?
    Place PIR via MD61 for this SFG, then demand will be in plant level & the supply proposal which is generated will also be anonymous. Once you post GR for the supply proposal it will be 101.
    If you do not sell your SFG, then maintain stg. grp as 70, if you sell at SFG level as well, then work with stg. grp 40. Maintain indiv / coll indicator as 2.
    Do a test in your sandbox & if it meets your need adopt in PRD.

  • Order Combination

    Hi All,
    Not able to combine  2 different  order  line items and create  single delivery. Same customer used in  both the sales orders.Order combination field flagged in  Customer master, sales order header level and item level. Config maintained  in copy controls from salesorder to delivery and below mentioned fields has same data in both the sales orders
      shipping point , ship to party, incoterms, sales organisation. Can  any one throw some light, on this , why  not  able to combine 2 different sales orders and generate single delivery? am i missing something
    Regards

    Run program ZLE_ANALYZE_DELIVERY_SPLIT in SA38 to analyze why the deliveries got splitted.
    If this program is not available, then the same can implemented using OSS Note 355404 - Why was there a delivery split during creation?
    Regards,

  • Can i order from the us online store and get my product in mexico?

    can i order from the us online store and get my product in mexico?

    No. Only in the US. There's an online store in Mexico that you can use - http://www.apple.com/mx/support/.

  • Use of vendor product number in shopping cart from personal template

    Hi all,
    I have the following scenario:
    We use ECC 6.0, SRM 5.0 MDM 5.5 sp6 catalog 2.0.
    In the inforecord master data in ECC we use the vendor product number (vpn). When a inforecord is created or changed, the inforecords (or changed data in the inforecord) get's replicated to SRM-MDM, just like all of the other masterdata (product, vendor and conditions).
    The vpn is included in the details of a catalog product.
    When a personal template is generated from a product in the catalog, it's saved with the vpn included.
    When the vpn changes in ECC, this number is replicated to the SRM-MDM catalog.
    So if you choose the product from the catalog after the canged vpn, the new, right vpn is used in hte shopping cart. But when you use the template that was created before the time the vpn was changed, the old vpn is used in the shopping cart and subsequently the pr and po.
    This leads to wrong delivery's.
    I've logged an oss call for this, because in my opinion this is a product default. But SAP points me on "standard design". This seems always to be the case when something difficult is asked.
    They said it can be solved with a BADI implementation. To be more specific a validation in SRM-MDM with the doc-change Badi.
    Is there some one who has experience with this kind of development and knows if this is the whight Badi of has an alternative?
    Thanks in advance!
    Best regards,
    JvE

    Hi,
    When a personal template is generated from a product in the catalog, it's saved with the vpn included.
    When the vpn changes in ECC, this number is replicated to the SRM-MDM catalog.
    So if you choose the product from the catalog after the canged vpn, the new, right vpn is used in hte shopping cart. But when *you use the template that was created before the time the vpn was changed, the old vpn is used in the shopping cart and subsequently the pr and po.
    *Solution:
    you have told that in MDM -VPN is updated from ECC
    Say for Eg : VPN  is 12345  in MDM
    you have created a shopping cart template with thie VPN : 12345 .
    you have ordered the shopping cart the VPN number will be 12345.
    After a week this VPN is updated from ECC by 12345ABC
    now you have to Delete the old shopping cart template what you have created 12345.
    You have to create a new template with VPN :12345ABC and create a  shopping cart
    How will the VPN change in the Old Template? It  is not possbile.
    It is not A product bug.
    Please try this method what I  have suggested
    Regards
    G.Ganesh Kumar

  • Re:Query for no.of days delayed using Receipt from production posting date.

    Dear SAP Experts,
    I need a query to calculate no of days delayed by using Receipt from production posting date and prod.order due date..i have already done the query but there is no link for joining the tables.Is there any link to join the tables..
    Plz Suggest a good query for this issue..
    With Regards,
    Revathy

    Dear Revathy,
    I think there is no need to link table if you just need calculate no of days delayed by using Receipt from production posting date and prod.order due date.
    You may check this query with the above:
    SELECT T0.ItemCode,T0.DueDate,
    T0.DocNum, T0.CloseDate,
    Datediff(dd,t0.DueDate,T0.CloseDate) Diff
    FROM dbo.OWOR T0
    WHERE  Datediff(dd,t0.DueDate,T0.CloseDate) > 0
    Thanks,
    Gordon

  • Non inventory Item used in BOM/production, but i need used qty used

    Hi
    What type of item do i use best or how can i achieve this:
    I have a license cost that is used in BOM's and therefore in production orders as well. Its cost is added to the product this way. At the end of a period, i need to know how many of the item has been used in a production. If i have set the item up as non-inventory, i don't get any statistics for the item.
    Howe do i have to set up the item to get my information.
    Thank
    Franz

    Hi Franz,
    Set up this item as non inventory item should be fine since you don't need to count the item on hand.  To get its qty for production, you could use query to get report.
    Thanks,
    Gordon

  • Order Combination indicator field setting on Customer Master create

    When creating a new customer master record it is auto populating the Order Combination flag on the Sales Data --> Shipping tab.  Where can this setting be "turned off" so it does not auto populate as checked?

    Dear Vicky,
    Menu Path:1
    IMG   FINANCIAL ACCOUNTING ACCOUNT RECEIVABLE AND ACCOUNT PAYABLE CUSTOMER ACCOUNTS MASTER DATA PREPARATIONS FOR CREATING CUSTOMER MASTER DATA DEFINE ACCOUNT GROUPS WITH SCREEN LAYOUT
    Or  
    Menu Path:2
    IMG LOGISTICS GENERAL BUSINESS PARTNER CUSTOMERSCONTROL DEFINE ACCOUNT GROUPS  AND FIELD SELECTION FOR CUSTOMERS
    Or
    Goto Transaction OBD2
    There you select your account group then, PRESS F2 , it will take you to Change view
    "customer account group” Details screen, there you double click on the sales area data
    which is available under field status tab, system will take you to Maintain Field status: Overview
    screen, there you double click on the Shipping then it will take you to Maintain Field status:
    shipping screen , there you will find field "Order combination" you put that field in the
    Suppress status, you requirement will get solved.
    Reward points please if it is useful
    Chandramohan

  • Sales order combination

    Hi Friends,
    I created two sales orders with same SP, SH, shipping point and requested delivery date. 
    i am creating one delivery from two sales orders using the t.code VL10H. I am getting two delivery documents instead of single delivery.
    Let me know what could be the problem.
    Thanks in advance.
    Regards,
    Govind.

    Hi Govind - Go to the customer master change mode and give your ship to party. There on the sales area data -> shipping tab, you would come across an indicator saying order combination. Check that indicator and then try creating delivery documents for the two sales orders.
    The order combination check box in customer master would enable all orders having same ship to location, delivery date and inco terms to be delivered through a single delivery document.
    Try VL04 -due list for creating delivery docs (I use this, ours is 4.7).....
    Thanks
    Nikhil

Maybe you are looking for