Order of teststeps and more groups / Reihenfolge der Teststeps und mehrere Groups

Hallo,
1.) wenn ich mir eigene Steps erstelle, dann kann unter "Sequence File Type" + "Properties" + "Menu" eine Group eingeben bei der man dann später im Testplan unter "Insert Step" den Test wiederfinden kann. Ist es auch möglich den Testschritt in 2 Gruppen einzugeben?
So dass zum Beispiel so eine Reihenfolge bei Insert Steps zu sehen ist:
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_1
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_2
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_3
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_1b
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_2b
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_3b
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_1
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_2
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_3
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_1b
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_2b
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_3b
2.) Wie kann ich die Reihenfolge ändern der Testschritte die unter einer Group (bei Insert Step) liegen? Momentan ist die Reihenfolge die der Erstellzeit.
Danke für Tipps

Hello again,
now the same in english:
1.) When creating my own teststeps, then i can create a group under "Sequence File Type" + "Properties" + "Menu". In this group the teststep can be found when clicking "Insert step" in a seqence-file. Is possible to set two groups for a teststep? (Like at "Insert step" + "synchronisation" + "Advanced" + "Semaphore"? There is the teststep "semaphore" under group_1: "Synchronisation" and then group_2: "advanced". Can this grouping in two groups also be made for my own teststeps?
The order looks the for example like this:
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_1
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_2
Insert Step -> Gruppe1 -> Sub-Group1 -> teststep_3
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_1b
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_2b
Insert Step -> Gruppe1 -> Sub-Group2 -> teststep_3b
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_1
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_2
Insert Step -> Gruppe2 -> Sub-Group1 -> teststep_3
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_1b
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_2b
Insert Step -> Gruppe2 -> Sub-Group2 -> teststep_3b
2.) How can i change the order of my teststeps that appear under "Insert step" + "group"? Currently the displayed order is the order of the creation time.
Thanks for your help.
Message Edited by NewOne on 06-16-2006 04:29 AM

Similar Messages

Step-by-step process of grouping Items in Category Sets and more accurately into the correct Category

Honestly, I have never had a customer ask me 'how' do I identify which Items go together in a specific category. I am thinking I start with the Functional Area (Inv, PO, OM, WM, etc..) attributes, and start the grouping there. The customer is asking for "best practices" - any input would be appreciated.
I have a fresh install of Oracle Inventory, Purchasing, Order Management, Service - We have 2,000,000 part numbers.
How have you instructed your customers/clients (both Internal and External) in the PROCESS of categorizing all of their Items?
What is the Step-by-step process of grouping those 2MM items into accurate Category Sets and more accurately into the most correct Category.
I would 'assume' it would start with some analysis with all the Items listed with all the item attributes, and start with ECCN (for example) or Item Type grouping. Then...(?)
Thanks!
rd

No answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

How can I control the order of accounts and folders in the folder pane?

I have many email accounts, and most of them share the same message store in Local Folders and I routinely download mail from all of this group. Additionally, I have a number of miscellaneous email accounts from which I do not regularly download email, so I have kept them showing as distinct accounts. However, since they are not important, I would rather that they come at the end of the list in the folder pane, as it does not matter much if they scroll off the bottom. Nevertheless, the folders for these accounts seem to insist on appearing before those for Local Accounts. I'd like to change that.
The explicit folders that I have created under Local Folders seem to insist on appearing in alphabetic order. Is there any way to override that?

Perfect! Thanks. It does exactly what I wanted and more.
Odd that it failed to turn up as a result of the search based on my initial question. My query had all the right words to get a hit. Hmmm ...
Now I am embarrassed. I just googled "thunderbird" followed by an exact quote of the question that is the subject of this thread, and guess what turned up at the top of the list! It should have occurred to me to try Google before I tried the question here. I guess I just never expected that there would be such a clean solution. Perhaps with my question now in the Mozilla database, others can benefit if they ask a similar question here.

Any questions on Order Management Header and Item level?

Hi,
If you are interviewing somebody...And the position he wants is SD consultant.
What kind of questions will you raise on OM header level and item level??
Order management--Questions on Header level
Questions on item level
Thanks, would be better if you could also attach the answer.
Thanks!!

Dear Hoo,
ORDER MANAGEMENT & SALES
1.Briefly describe the types and structure of the sales document and give examples of data
that you find on the different levels.
Sales*related business transactions are recorded in the system as sales documents. There are, broadly
speaking, four different groupings of sales documents:
Sales queries, such as inquiries and quotations
Sales orders
Outline agreements, such as contracts and scheduling agreements
Customer problems and complaints, such as free of charge deliveries and credit memo requests.
Header Data
The general data that is valid for the entire document is recorded in the document header. This data
includes the:
number of the sold*to party
number of the ship*to party and the payer
document currency and exchange rate
pricing elements for the entire document
delivery date and shipping point
Item Data
Whereas data in the document header applies to all items in the document, some data applies only to
specific items. This data is stored at item level and includes the:
material number
target quantity for outline agreements
number of the shipto party and the payer (an alternative shipto party or payer can be defined for a
particular item)
plant and storage location specifications
pricing elements for the individual items
Schedule Line Data
An item consists of one or more schedule lines. The schedule line contains all the data that is needed
for a delivery. For example, a customer orders 20 pieces of a material and you enter this as an item in
the sales order. However, you can only deliver 10 pieces now and the remaining 10 pieces next month.
In other words, you need to schedule two deliveries. The data for these deliveries (dates, confirmed
quantities) are stored in two separate schedule lines. In sales documents where delivery data is not
relevant *for example: contracts, credit and debit memo requests * the system does not create any
schedule lines.
Data recorded in the schedule lines includes the:
schedule line quantity
delivery date
confirmed quantity
2.What is the difference between an inquiry and quotation ?
. Inquiry: Request made to a vendor for a quotation for required materials or services.
No availability check is done for inquiry.
. Quotation: Offer from a vendor to a purchasing organization regarding the supply of materials
or performance of services subject to predefined terms and conditions.
A quotation consists of a number of items, in which the total quantity and delivery date of an
offered material or service are specified.
The total quantity can be subdivided into several partial quantities with different delivery dates in the
lines of a delivery schedule.
3.Do you always have to have a material master record number when you enter an item on a
sales document (inquiry and quote)? If not what would you have to use to be able to enter
information at item level?
No. Customer Material Information or Material Description.
4.If a customer doesn't place an order with you after you have sent him a quotation, what happens to
the quotation document?
Remains active till the end of validity period.
5.Can you have alternative items in a sales order?
Yes.
6.If you reference an inquiry when creating a quotation ,would the inquiry be updated?
Yes.
7.Can you copy one inquiry to many quotations ?
No.
8.Can you copy several previous documents into one sales order?
Yes.
9.Do you always have to copy the entire quantities at item level when you reference a
previous document?
No.
10.Can you make sure that business data in a sales order is only possible to maintain at header
level?
Yes.
11.From where is the delivering plant transferred into the sales order?
Customer Master, Material Master.
12.Which partner function is relevant for the delivering plant? The soldtoparty ,
billtoparty, payer, carrier or the ship* to* party?
Ship*to party.
13.Can you manually change the delivering plant in the sales order once it was defaulted from
the master data?
Yes.
14.For what or why do you use the incompletion log?
To have a complete document so that it doesnu2019t affect subsequent processes.
15.Can you have different incompletion logs for different item categories? Schedule line
categories?
Yes.
16.If a document is incomplete can you still save the document?
Yes.
17.Which reference status can a document have at item level? Which statuses at header level?
Item level: Partial, Full.
Header level: Full.
18.What's the advantage of using text as a reference instead of duplicating it?
Can be modified if needed.
19.What three sources provide data for the creation of a sales document?
Material Master, Customer Master, Previous referenced documents.
20.Can you change addresses of partners manually in the sales document?
Yes.
21.Name several input tools that make order entry faster and give a definition of them?
Customer Material Information, Product Proposal , Referencing Documents.
22.In which business environment would you use only the single*line entry screen to create
and save the order?
Telephone Sales, Simple Business.
23.If you do not specify the delivering plant in the sales order, what could the system then not
do?
Delivery Scheduling.
24.For what would you use the fast change function in sales entry?
Alternate Plants, Delivery or Billing Blocks
25.Name two ways to control that customers can receive only certain materials?
Material Listing, Exclusion.
26.What does the item category control?
General Data
. Should pricing be carried out for the item?
. When should an item be regarded as completed? A quotation item, for example, can only be
regarded as completed if the entire quantity has been copied into a sales order.
. Is it an item that refers to a material or is it a text item?
. Are schedule lines allowed for the item?
. May general business data, for example, the terms of payment at the item level, deviate from
those at the header level?
. Should a system message appear if the item cannot be fully delivered?
. Which fields are relevant for the incompletion log?
. Which partner functions are allowed at the item level and which are mandatory?
. Which output (for example, an order confirmation) is allowed for the business transaction and
which output determination procedure is used?
Shipping Data
. Is an item relevant for delivery?
. Should the weight and the volume of an item be determined?
Billing Data
. Is an item relevant for billing?
. Should the cost of the item be determined?
. Is it a statistical item? Pricing is carried out for statistical items. However, they are not added
to the value of the order, that is, the customer is not charged for them.
. Should a billing block be set automatically for an item? For example, this may be important for
items whose prices have to be clarified before billing
. Is it a returns item?
. Name the influencing factors for determining the item category in the sales document?
. Sales Document type, Item Category Group, Higher Level Item, Item Usage.
. Name the influencing factors for determining the scehdule line category in the sales document?
. Item Category, MRP Type.
. What does the sales document type control?
General Data
. Can the document be entered only with reference to a preceding document?
. Should the existing customer
. material info record be taken into consideration?
. Should the delivery date be proposed?
. Must a customer number be entered when creating a document? For example, product
proposals can be entered without reference to a particular customer.
. Which order probability is defined?
. Should the division be taken from the material master record for every item or should an
alternative division specified in the header take precedence over the item specifications?
. How should the system respond if the division entered in the header deviates from the division
in the items?
. Should a credit limit check be made?
. From which number range should the document number for internal or external number
assignment come?
. Which fields are relevant for the incompletion log? The validity period, for example, is
important for contracts and must therefore be specified in the document.
. Can an incomplete document be saved or must all data be complete?
. Which partner functions are allowed and which ones are mandatory?
Shipping Data
. Which delivery type should the delivery resulting from the order have?
. Should delivery scheduling be carried out?
. Should transportation scheduling be carried out?
. Should a delivery block be set automatically for a specific reason? For example, a delivery
block may be appropriate for a freeofcharge delivery.
. You can define shipping conditions for a sales document type. These are copied into the
document regardless of what is defined in the customer master record.
Billing Data
-->Which billing type should the invoice resulting from the order or the delivery have?
Should a billing block be set automatically for a specific reason? For example, a billing block may be
appropriate if a credit memo request should first be checked before it is used as the basis for a credit
memo.
-->Can the sales document type be determined by the system?
No.
-->In R/3, can you automatically substitute one product for another? How? What would you
have to create?
Yes. Product Selection / Material Determination.
-->Give a definition of replenishment lead time?
Total time for the inhouse production or for the external procurement of a product. In inhouse
production the replenishment lead time is determined to cover all BOM levels.
What's the difference between checking availability with or without replenishment lead time (RLT)?
With RLT : Availability check is done only upto end of RLT. If material is not available the date on
which RLT ends is displayed as Material Availability Date.
Without RLT : Availability check is unrestricted. Displays Delivery Dates as on which partial deliveries
can be made with available stock.
-->Name at least three item categories?
Standard Items : AFN, AGN, TAN.
Free of charge Items: AFNN, AGNN, TANN.
Non*stock Items : AFX, AGX, TAX.
Text Items : AFTX, AGTX, TATX.
-->Why would you use different item and schedule line categories?
Item categories are defined to provide additional control functions for the sales documents and thus
meet the demands resulting from the different business transactions.
The items in a sales document are divided into one or more schedule lines. These schedule lines differ
from each other with respect to date and quantity. For some schedule lines, material requirements
planning is not carried out; for other schedule lines, it is carried out. Also goods receipt, not goods
issue, is posted for a schedule line defined in a returns document.
-->Can you change existing standard item categories?
Yes.
-->Can you create new sales order types?
Yes.
-->Different dates will be calculated in order entry scheduling . Can you name the lead time
variables that will be taken into account?
Transportation lead time, Pick/pack time, Loading time, Transit time .
If you run out of stock in a specific plant can you check if there are quantities available in other plants?
Yes.
-->When you carry out availability check, which quantities or movements can the system take
into consideration?
The following elements can be included in the availability check:
Stocks : safety stock, stock in transfer, stock in quality inspection, blocked stock.
Inward and outward movements : purchase orders, purchase requisitions, planned orders, production
orders, reservations, dependent reservations, dependent requirements, sales requirements, delivery
requirements.
-->Give some examples of sales document types (description, not necessary the short code)
that already set up in the standard system?
Indicator used to control the processing of the various sales documents which are defined in the
system. E.g., OR, SO, BV, KR. Document types allow the system to process different kinds of business
transactions, such as standard orders and credit memo requests, in different ways.
-->Can you maintain texts for a specific customer and store them in the system? If yes, where?
Yes. Customer Material Information.
-->When the system checks availability which scheduling would it use first?
Backward Scheduling.
-->Name the influencing factors for the determination of the availability date?
The following data is required for determining this date:
Route from the shipping point to the ship*to party location
Shipping point from which the goods are issued
Loading group from the material master record
Weight group determined from the order using the order quantity.
-->Name the three delivery possibilities when there is not enough stock available?
One Time Delivery, Complete Delivery, Partial Deliveries.
-->Can you think of an example why you would have to create a text for a customer and copy it
to the sales order?
Customer specific instructions.
-->What is the function of item category group?
The item category group determines how a material is processed in the sales order. It defines, for
example, that pricing does not take place for a free of charge item, such as a business gift; or that
inventory management is not carried out for a service. When processing sales and distribution
documents, the system uses the item category group to determine the item category. The system
determines the item category based on the item category group of the material and the current
business transaction, and proposes it in the respective document.
When creating the material types non*stock material and services, DIEN is proposed in both cases for
the item category group, because the order processing for both material types is identical: for
example, pricing is carried out for both, but no availability check.
-->On sales order, when the system confirms 20 pieces to be available at a certain date, would
these 20 pieces still be available for other new sales order coming in later?
No.
-->What is a delivery group and why would you use it?
The complete delivery and delivery group functions enable you to combine some or all of the items in a
sales order so that they are delivered to the customer together. The system determines automatically
the latest delivery date possible for the delivery group and adjusts the schedule lines accordingly.
Corresponding requirements for material requirements planning (MRP) are changed or re*determined.
-->What is backorder processing?
The backorder processing functions enable you to list relevant sales documents for specific materials
and process them from the point of view of availability. You can assign available to promise (ATP)
stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and
reassign them to different items.
Backorder processing is only available for materials with individual requirements.
-->Can you link items in a sales order? If yes, when would you do that?
Yes. Promotional Items.
-->For what would you use BOMu2019S in sales? What two methods of BOM processing do you have
in sales order entry? How can you control if the system should/should not explode a BOM in
the sales order.
A bill of material (BOM) describes the different components that together create a product. A BOM for
a bicycle, for example, consists of all the parts that make up the bicycle: the frame, the saddle,
wheels, and so on. When you enter the material number of a bill of materials that is relevant for sales
order processing, the system displays the material that describes the whole bill of materials as a main
item. The components are displayed as sub*items.
Processing by Main Item : ERLA & Processing by Sub*Item : LUMF
BOM explosion can be prevented by specifying Item Category Group as NORM.
Credit limit checks is an example of a very close link between which two SAP modules?
SD & FI.
-->What are the two techniques in delivery scheduling?
Backward Scheduling & Forward Scheduling.
-->How does a third party deal work? Do you use a special sales order type for that? How could
the system know that you want to process a third party deal?
By specifying item category as TAS using double*line entry in the sales order.
No special order type is available.
By the item category group and/or material type in Material Master .
Name the several steps in consignment processing.
Consignment fillup, Consignment issue, Consignment pickup, Consignment return.
Whatu2019s the difference between consignment pick*up and consignment return?
In consignment pick*up, customer returns consignment stock. When goods issue is posted, the
relevant quantity is deducted from the customer's special stock and is added back to regular stock at
the plant where the goods are returned. Total valuated stock remains the same since the returned
stock was regarded as part of inventory even while it was at the customer's premises.This transaction
is not relevant for billing.
In consignment return, customer wishes to claim on consignment goods which have already been
issued. When goods issue is posted, the relevant quantity is added to the customer's special stock at
the plant where the goods are returned. Since the ownership of the goods is passed from the customer
back to the company, the transaction is relevant for billing. In this case, the customer receives a credit
memo for the returned goods.
-->Can you control that an end user cannot copy a quote of customer A to a sales order for
customer B? If yes, where?
Yes. By customizing Copying Control for header data.
Give some example for data that is copied from the customer (soldto, payer, shipto) to the sales
order as well as for data that is copied from the material?
General data, payment terms, shipping details, delivery agreements, delivering plant.
-->What is returnable packaging processing?
Returnable packaging consists of materials that are stored at the customer location but which remain
the property of the company. The customer is only required to pay for the returnable packaging if he
does not return it by a specified time.
Name the two outline agreements in R/3 standard and explain the difference between them.
Agreements are arrangements between business partners regarding the granting of conditions over a
specified time period. The agreement contains conditions which apply over a particular time period and
which are settled together at the same points in time. An agreement can be settled once or
periodically. The two outline agreements include Contracts and Scheduling Agreements.
Unlike a contract * which only contains an overall target quantity or value * a scheduling agreement
also contains specific order quantities and delivery dates.
-->How many documents do you create when you release, deliver and invoice the first order
from a contract?
Three : Sales order, Delivery note, Invoice.
-->What types of output can you have in sales?
Printer, Telex, Fax, Mail, EDI.
-->Can you automate output processing ? Do you always have to specify it manually?
yes. No.
-->Where would you specify which data should be copied (at header, item and schedule line
level)when you copy from one document to another one?
Customizing Copy Control.
I hope it will help you,
Regards,
Murali.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Process Order does Confirmations and GR even after the Process order is CNF

Not Sure why the Formatting is lost.
Hi Gurus,
I am a beginner in this area and request your help.
We are implementing a project where the process order Confirmation in SAP ECC 5.0 in SAP PPPI module is done using xMII which call the BAPI_PROCORD_CREATE_TT     RFC.
The customer wants to (certain times) do a final confirmation without actually completing the order e.g if the Order Qty is 100 then, they want to just manufacture 25 and then do a final confirmation, after which SAP GUI screen does not allow any Process order Confirmations against that process order.
We are using the BAPI_PROCORDCONF_CREATE_TTRFC to do multiple PO Confirmations and GR for particular Process order. Below is a scenario
Case 1:
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
     Which means only 100 is accepted.
2. 100 Quantities are produced and confirmed using the BAPI_PROCORDCONF_CREATE_TT (with Final confirmation value as 1 , which mean auto confirmation)
3. Next when the BAPI confirms & GR's against the same order, the Complete qty is not visible in the COR3 status. And is visible only in the COGI transaction.
That is expected behavior. and i am ok with that.
Case 2: (The one with the problem)
1. Order Qty =100 ( Unlimited Delivery is not checked and tolerance is Zero).
     Which means only the 100 is accepted.
2. 25 Quantities are produced and confirmed using BAPI_PROCORDCONF_CREATE_TT (with Final Confirmation value as X , which mean Final confirmation)
3. The Confirmation and GR go through and the status of the process order now changed is CNF and the Deliverd qty is 25.
At this point , if you logon to SAP GUI and try to make a process order confirmation you get an error messages which says the Process Order is already confirmed and no more confirmations or GR can be done against this Process order.
4. But when you Again Run the BAPI_PROCORDCONF_CREATE_TT, it goes ahead and confirms and makes the GR for that Process order.
The Expected Behavior should have been that this quantity is now in the COGI transaction.
5. The Process order allows any number of Further confirmations till the Ordered Qty and Delivered quantity are same .
so dear gurus I know i have written a very long doubt but would be very happy to get a response from you. I would ideally not like to enhance or change the BAPI and want to understand if I have missed some setting or parameter that I have to pass in the BAPI for the final confirmation so that once the Status of the Process order is CNF , no more Confirmations are allowed even from the BAPI.
Thanks in Advance.
Regards
Suraj

Hi Suraj,
I am not positive, but I suspectt the problem lies in the BAPI. It might be how you have the data set in MII, but it sounded like you are doing it correctly.
However there are a number of things you can do to troubleshoot your situation.
First create a few process orders to test with.
Record the confirmation numbers and counters for each of the following:
1) Do a final confirmation (for quantity of 25 instead of the 100) in CORK (or whichever transaction you are using).
2) Do a final confirmation (for quantitiy of 25 instead of the 100) in SE37 or BAPI in ERP using the BAPI_PROCORDCONF_CREATE_TT.
3) Do a final confirmation (for quantitiy of 25 instead of the 100) from MII using your current transaction.
Review the confirmations in ERP to see if there are any differences.
Review the confirmaitons in MII to see if there are any non visible differences (use a Tracer to retrieve the response segment from an execution of BAPI_PROCORDCONF_GETDETAIL using the recorded confirmation numbers and counters)
Case 1) If there are differences in the results, that should tell you how to modify your transaction to include or change the appropriate values in your inputs.
Case 2) If there are no differences, then it is most likely that there is something not working properly in the BAPI you are using. It may not completely replicate the functionality in CORK (or whichever transaction you are using in ERP). Then open a ticket, because the BAPI is not working as it should.
Good luck,
Mike
Edited by: Michael Appleby on Aug 17, 2009 8:20 PM

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

Difference between sales order schedule line and item level data

Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
Ramya

Hi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran.

My Super smash bros Wii U pre order because i pre ordered in store and placed a $5 deposit

Let me share what I was told when I arrived at best buy store. By the way I will file a complaint to corporate about this and will see about filing it to better business bureau... I pre ordered my smash brothers bundle in store ( couldn't do it online because there are issues with my account for a year now and after numerous calls to fix it which I have been given so many ticket numbers,best buy just cant fix their own mistakes). I arrive at the store to pick up my pre order and the employee responds with a dissapointing tone"don't tell me you preordered the bundle." the employee just walks back and forth. She then asks her co-worker which she then tells me "we don't have your preorder...we only filled orders for the people who preordered online and fully paid the game." I asked for a manager and told him this is the second time best buy has messed up my pre orders and provide me with poor service. He then says that they only filled the orders from online purchases and who paid in full which makes me feel like I didn't matter only because I placed a $5.00 deposit to guarantee my copy.overall I received poor customer service, he did not own the situation and didn't offer at least some type of compensation to a "former" loyal elite customer. In general, best buy has given me poor service throughout the year by not fixing my ability to order online for a year, messing up my pre order of Mario kart 8 by charging me for the free $10 gift card which was supposed to be free for pre ordering the game and then refusing to give me a refund for the $10 charge, and finally telling me that even though I pre ordered, because I didn't pay the bundle in full I don't get my copy at all... Not even a phone call,common courtesy to notify me. This is it! Best buy will never get business from me and I will never recomment it to anyone. Amazon on the other hand does everything right, and owns the situations and strive to make things right.Amazon is now my go to for shopping all electronic and entertainment needs. Amazon even allowed me to place a new order for the bundle and will receive it next week versus best buy saying " we don't know when we will get them." In short I cancelled my pre order from best buy and took my business elsewhere. Finally when I asked the supervisor for corporate's contact information, he refused to provide it. Now I need to check online and hunt down that information

Hello redrevolver4,
Thank you for pre-ordering from Best Buy, and thank you for sharing your experience with us. We as moderators on the forum work at the corporate office, and I am happy to talk to you today.
Reading through your description of events I can certainly understand why you would be disappointed. It is not our intent to leave any customers out when they pre-order a product with us. While we are working to fulfill our in-store pre-orders that were not yet completed, I can also understand your desire to cancel the order and go where you could get an order shipped out to you. I am sorry that was not us this time.
I will certainly document your feedback so that we can learn from it and ensure that our stores are adequately equipped to fulfill orders as our first priority, but provide all care and courtesy when things don't go quite as intended.
I did have one more question for you, though, and I will be sending you a private message with that. Please watch for that message from me shortly.
Thank you,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

Hi Eva B.,
Please refer to the help document below:
Adobe Store | Online order and payment FAQ
Regards,
Sheena

Define key figures -incoming order, invoiced sales and credit memo in BW

Hi everyone,
I combined two ODS into one ODS from 2LIS_11_VAITM & 2LIS_13_VDITM. I want to generate reports that contain net value, cost of incoming order, invoiced sales, and credit memo'(SD module).
I tried to create some calculated key figures in BW that contain the net value and cost of incoming order, invoiced sales and credit memo. However, i couldn't find relative fields to define them.
Can anyone provide help regarding how to create those key figures in BW? Thank you.

Hello John,
I think the best way to check it out is by looking at the business content. There might be mapping already defined for the fields you are looking for. The one standing out is perhaps the net value 'ONET_VALUE'.
Please try to use as much of content KF as possible. A good approach to finding the right info-objects is by searching the business content by info-sources and marking the grouping as 'Collect before and afterwords', it should list down all the dependent info-objects.
Hope that helps.
Cheers, Ashu

How to add three fields in Sales order item level and supress/hide many

Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
Srikanth

Hi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth

How to compare the no. items in an order i ERP and CRM?

Hi SAP Experts,
We are facing an issue where the number of line items in an order(same order) in ERP and CRM are different , properly not synchronized.e.g., one order in ERP is having 5 line items but in CRM for the same order has 7 line items.
How to compare and identify the difference in number of line items in ERP and CRM for same orders?
Is there any report or tables , any other way?
Thanks in advance
Best Regards
Succhi

You can use transaction SDIMA for checking if data between crm and erp are synchronized. You can either run a Header comparison or Detailed comparison of the data. It is simple and easy to use. You can find more details here: http://help.sap.com/saphelp_crm70/helpdata/EN/49/2a5a1d6c7f3895e10000000a421937/frameset.htm
Or you can use report CRM_ODE_CHECK_DOC in CRM system to compare sales Documents between R/3 and CRM per transaction type/sales organization or even the transaction number. Also has got options to check transactions Not equal in CRM and R/3.
Regards.

Order of teststeps and more groups / Reihenfolg​e der Teststeps und mehrere Groups

Similar Messages

Maybe you are looking for

Order of teststeps and more groups / Reihenfolge der Teststeps und mehrere Groups