Order of Variables in selection criteria involving multiple queries

Hello,
I've a query Q1 which has one of it's variables defined with replacement qry Q2. The query Q2 has a variable defined with replacement qry Q3. When i put qry Q1 in a application designer template and run the report, The selection criteria has the variables in the order of Q3, Q1 instead of Q1, Q3.
How can i control this order of variables appearing in sel criteria.
(i've observed that if there are 2 queries in the report the order is correct i.e Q1, Q2).
The second problem is, in the report i've added a
'Text Element' object. In the webitem tab, for property
'List of Text Elements', i've added all the variables
of the Query, The variable of qry Q1 are populated in the report output, but the variable of qry Q3 are not, How do i display this variable.
For the  variables where no criteria is given, the report shows the text as 'Empty Demarcation'. How can this be made blank.
Regards,
Nagendra.

Hi Nagendra,
For removing the Empty Demarcation, in SE38 > SAPLRRSV > look at Text Element 301 and blank it out.
Hope this helps...

Similar Messages

  • Open Hub - variables in selection criteria

    Hi there Experts
    I would like to be able to use a variable in selesction criteria in DTP fro Open hub.
    To only extract previous month.  Is it possible to do this in the GUI of Open Hub.
    If not, any smart workaraounds?
    best regards
    Ingrid

    Good Morning Gueorgui.
    I am not using FISCPER, but posting date, so fiscvar should not be necessary.
    But is it possible to use a variable  like in BEX queries.  Like 0DAT or some Zvariable.
    In general OLAP variable in DTP.
    Thanks you.
    Ingrid

  • Key Figure based on selection criteria

    Hi SDNers,
    I have Key figures which  i would like to display based on multiple selection criteria... for this we donot have master data data restricted at the query level it should be at the key figure leve...
    Eg:
    Sales which i would like to display based on SORG,DIV,MATERIal Etc.. Kindly can anyone will help...
    Thanks
    Sonu

    You can create restricted key figures if you want to use the same selection criteria in multiple queries.  In which you can get value for key figure for selcted filters on that perticular key figure.
    If you need it for just one query  you can create a structure and in that structure you can create a new selection which has your restrictions on that key figures.
    Search on help you will get to know hot to create structures and restricted key figures.

  • Updated Report Selection Criteria doesn't show in Publication

    Hi,
    This is my first post in this forum and I'm relatively new to Crystal Reports Server.
    We have Crystal Reports Server 2008 V1 SP3.
    I have two independent reports that I've put together in a report publication. The report is saved to the file system.
    I made a change to one of the report's selection criteria. I viewed the report thru the Crystal Reports Program and Infoview/CMC to confirm the additional records I wanted showing were showing. They were and everything worked.
    A week went by and I noticed that the saved report didn't have the additional records.
    I've contacted SAP support and we were able to get everything working by doing the following
    1) Remove the updated report from the publication's Source Documents list. Save and Close
    2) Re-add the report to the publication's Source Documents list.
    3) Delete the old recurring schedule (so we don't have two instances doing the same thing).
    4) Re-create a new schedule for the delivery (not reschedule and replace an existing nor reschedule and create new, but a brand new one).
    These changes were compounded by the fact that I had 4 different scheduled instances, each with a different parameters, so these 4 steps were actually closer to 8.
    In my own testing I was able to confirm something similar happens with a single report (not part of a publication) when you change the selection criteria. I had to create a new scheduled delivery in order to get the selection criteria change to flow thru.
    My questions to all you is
    Is there some other way to distribute 2 reports in way that making a change the criteria of the report doesn't require doing anything else?
    Thanks.
    Edited by: David Steven on Feb 13, 2012 9:58 PM

    Hi RobbinsFam!
    Here is an article that describes the issue you are seeing, and can provide you with some helpful troubleshooting steps:
    iOS: Unable to import photos to computer
    http://support.apple.com/kb/ts3195
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • BADI Impl. VB_BD_SELECTION to change selection criteria in batch det.

    Hye,
    I need to use the BADI VB_BD_SELECTION in order to change the selection criteria to be used during batch determination
    For this purpose  method RESTRICT_CONF_CHARS has been implemented.
    But I didn't find any documentation explaining how to manage this one:
    as result the characteristic record is deleted from the selection criteria instead of updating it with a new value specified in the structure CT_CONFIG-ATWRT.
    For example:
    in the strategy  we have the value car1 = A.
    If BADI is off than the system in production order uses right this criteria to determine the batches.
    If BADI is on than we want to define new criteria to find batches with the characteristic car1 = B but the system deletes car1 from  selection criteria.
    Thanks
    Anna

    Hi Anna,
    I have the same problem for another customer project.
    The big problem is I didn't found any documentation or an class example for that BAdI.
    Please help us.
    Thank you

  • PO selection criteria doesnt return the correct values!

    Hi all,
    We are working on SRM 5.0 (SP11),standalone scenario.
    The problem we are facing is that when some users execute the trasncn PROCESS PURCHASE ORDERS and enter any selection criteria,only the PO's with status 'held' are displayed.Also this problem occurs only for some of the users.For other users,the search returns all the PO's.
    The roles/authorizations/profiles are same for all the users who are using this transaction.
    The notes Note 1138911 - BBP_POC - Search issue in purchase order,Note 1128758 - BBP_POC: Search Issue in Purchase Order are applicable in our case as we are on SP11 but we are not able to understand why the search criteria is working for some users while  for others the list is not displayed properly.
    Has anybody faced a similar issue.All responses will be rewarded.

    Thanks for the feedback.
    I have created this as a report and therefore the subscreen is defined in a report include - not sure this is the best way to do this. I would be interested to knw how you got this to work?
    Did you create a function group and then a function module to create the subscreens?
    In this case did the search helps relating to the subscreen selection screen work?
    Appreciate your thought <<text removed by moderator>>.
    Cheers,
    Dannyboy?
    Edited by: Matt on Dec 7, 2008 8:23 PM

  • Query performance when multiple single variable values selected

    Hi Gurus,
    I have a sales analysis report that I run with some complex selection criteria.  One of the variables is the Sales Orgranisation.
    If I run the report for individual sales organisations, the performance is excellant, results are dislayed in a matter of seconds.  However, if I specify more than one sales organisation, the query will run and run and run.... until it eventually times out.
    For example; 
    I run the report for SALEORG1 and the results are displayed in less than 1 minute. 
    I then run the report for SALEORG2 and again the results are displayed in less than 1 minute.
    If I try to run the query for both SALEORG1 and SALEORG2, the report does not display any results but continues until it times out.
    Anybody got any ideas on why this would be happening?
    Any advise, gratefully accepted.
    Regards,
    David

    While compression is generally something that you should be doing, I don't think it is a factor here, since query performance is OK when using just a sinlge value.
    I would do two things - first make sure the DB stats for the cube are current.  You might even consider increasing the sample rate for the stats collection  if you are using one.  You don't mention the DB you use, or what type of index is on Salesorg which could play a role. Does the query run against a multiprovider on top of multiple cubes, or is there just one cube involved.
    If you still have problems after refreshing the stats, then I think the next step is to get a DB execution plan for the query by running the query from RSRT debugging mode when it is run with just one value and another when run with multiple values to see if the DB is doing something different - seek out your DBA if you are not familiar with executoin plan.

  • Work Order Reporting using I_BEGRP as a selection criteria

    Hello all,
    I am having a small problem regarding the authorization object I_BEGRP, which appears at general data informed tab at equipment level. The situation is as described below:
    Our client has several subcontractors working with Maintenance Work Orders in the system, and in order to control that each subcontractor does only access to their own data (equipment, work orders, etc.) different authorization group has been used to assign each of the equipment.
    Problem is now when the client needs to be able to know the list of MWO per subcontractor.
    The need is clear: for a user that is not restricted by this authorization group, it cannot be usedas a selection criteria to obtain a list of WO of a certain subcontractor.
    I have seen that it can be shown in the equipment standard report IH08, but only as exit data, but not as entry selection criteria, but neither for MWO (IW39) nor for notifications (IW29) it can be used as an entry selection criteria.
    Can someone help me with this issue? is the only solution to make a custom development, and to copy program RIAUFK20 in order to allow this field as an input?
    Thank you very much for your help.
    BR,
    Francesc.

    Hi,
    the only workaround I can think of is to use suitable search help for equipment. So the process would be to run IW29, open search help for equipment that allows you to specify authorization group (I think Equipment by Equipment list should work), then select all equipments from the auth. group and then run IW29 restricted by equipments. It's not nice but it allows you to select all orders that have equipments assigned to some specific authorization group. Otherwise you need to enhance standard reports to allow authorization group as one of the select options.
    Cheers

  • Error message : No order corresponds to selection criteria

    Hi,
       I am using T code CN24N for scheduling networks for a project and entering Project as the input.
    But I am getting the error:
    No order corresponds to selection criteria
    networks are there for the selected Project.
    Can anyone tell me the possible reason for this?
    Regards,
    B P Singh

    Hi,
    Specify the Project & Network for the project in selection creteria & select the option as only selected network & excute the transaction.
    Regards,
    Raj

  • Copy selection criteria from quotation to Sales order

    Hi Experts,
    I am creating a quotation. For the quotation line item, i am going to batch determination. Then i am clicking the SELECTION CRITERIA button. It gives me the batch characteristics screen. There i am entering the values to the characteristics. While coming back to sales order screen, i am copying only the SELECTION CRITERIA ( i am not copying the batches ).
    I am creating a sales order w.r.t the quotation. I want the selection criteria of the quotation line item to be copied into sales order line item. How to proceed for this?
    I checked the copy control in VTAA. But i am not able to find any configuration to copy a Quotation line item "SELECTION CRITERIA" to a sales order line item.
    Is this possible via a configuraton or thorugh any user exit?
    Thanks,
    Niranjan.

    Hi,
        Check the exit in programs MV45AFZZ (FORM USEREXIT_MOVE_FIELD_TO_VBKD) as u are using purchase order text.
    Regards

  • Variable selection criteria in the record selection

    Variable selection criteria in the record selection with Crystal Report with SQL 2005 Server tables.
    In the record selection I would like to use the value of the field u201CsSQL1u201D as part of the selection criteria instead the field name {tblReportAccessAutority.sSQL1}
    The value of the field {tblReportAccessAutority.sSQL1} is {tblSalesReporting.sJEDivisionCode} = 'I'
    I tried with formulas, SQL expressions, but nothing works.
    Record selection of the report:
    {tblReportAccessAutority.sUserID} = CurrentCEUserName
    and {tblSalesReporting.sLegalEntity} = {?Legal Entity}
    and {tblSalesReporting.sJEPeriod} = {?PARAM_PERIOD}
    and {tblSalesReporting.sIG3rd} =  {?PARAM_IG3RD}
    and {tblReportAccessAutority.sSQL1}                           <---this is the problem line
    The field {tblReportAccessAutority.sSQL1} is not converted in the value:
    {tblSalesReporting.sJEDivisionCode} = 'I'     
    The tables tblSalesReporting and tblReportAccessAutority are joined in this report.
    Many thanks for your help.
    Roger

    How is the syntax for the selection criteria in the record selection?
    {tblReportAccessAutority.sUserID} = 'ch1scro2'
    and {tblSalesReporting.sLegalEntity} = {?Legal Entity}
    and {tblSalesReporting.sJEPeriod} = {?PARAM_PERIOD}
    and {tblSalesReporting.sIG3rd} = {?PARAM_IG3RD}
    and SELECT {@sSQL_Condition} ???????? or
    and  {@sSQL_Condition} ??????? or how?
    The expression fir the formula {@sSQL_Condition} is:
    TOTEXT({tblReportAccessAutority.sSQL1})
    The field definition for {tblReportAccessAutority.sSQL1} is nvarchar(50).
    Thanks Roger

  • WAD - How to create the variables to have the selection criteria

    Hi all,
      I am trying to display a BW Statistics query in 'Chart' with Web Application Designer (WAD). I want to have the selection criteria with variable USER ID ('ABC123'), Info Cube ('Z_FIGL_C01') and Time Period '01/01/2005' to '12/31/2005'. How can I have this selection criteria in Web Application Designer, PLEASE ?.
    Thanks.

    Venkat,
      Yes, It's possible.
       I think in the menu options.. there tools--> create Table(it's not Table Web Item web item). May be similar option. we need to create the Table. Right now i don't have the system. you need to keep the 2 Drop Down Boxes in the Table(in the 2 coloumns).
    All the best.
    Regards,
    Nagesh Ganisetti.

  • Attribute variable in a selection criteria

    Hello Experts,
           I have an attribute '***' under infoobject 'patient id'. I wanted to create a variable on '***' and use it in the selection criteria on a query. I need to get only two options i.e F(emale) or
    M(ale) but I get all the options of 'patient id'. Is it possible to create variables on attributes and use them as the selection criteria? It would be great if someone could refresh me.
    Thanks,
    Anjali

    Hi!
    anjali I created a simmilar  senario in my system. It works fine with me. I have following conditions
    1) maitained masterdata for this *** infoobject
    2) maitained ***  as a navigational attribute in patient attributes and activated the patient
    3) maintained the *** attribute as a navigation attribute in ods object
    4) created a query which display my data based on ***
    5)created a variable with userentry  opetion with no default values.
    6)activted master data once again after this step
    I ods object i added the person(patient) in my data part and the *** attribute in navigational attribute section is displayed as  ZIOPERS_ZGENDER and ticked as navigational attribute.
      finally it is working  with my system. it is displaying only F and M values in variale entry scrren help. try closing the Bex and then restarting it.
    hope this info helps you
    with regards
    ashwin

  • MB26 - Activate "Sales Order"  as Selection Criteria

    Dear friends ,
    Is it possible to activate field "Sales order"  as selection criteria ?
    Best regards,
    Ale

    Hi,
    The field is already in the report.
    What do you mean by activtion of field.
    If you want to make it mandatory then you can create a variant and you can make sales order field as the required field.
    Regards
    k

  • Report Painter - Change multiple selection criteria

    Hi Experts,
    I am new to report painter. I need to change a report which is being developed in Report Painter. I need to add extra selection criteria.
    Please help.
    Regards,
    Nitin.

    Please search for available information before posting, do not post basic questions.
    Thread locked.
    Thomas

Maybe you are looking for