Order quantity field in the item overview tab of a sales order

Hi,
I would like to make the order quantity field inactive, i.e., the field should be greyed out, when i enter the transaction VA01.
Is there any way this can be done through functional configuration?
Cheers,
MR

Unfortunately, it doesn't.
The requirement was to adapt transaction's layout in order to disable editing (e.g. turning it to grey, disactivating the field) for a particular field. This kind of job should be done dinamically as it interests only some kind of Purchase Requisitions (whose attributes should be checked "runtime").
I found a good user exit which is executed every time a PR is loaded from Enjoy transactions ME51N/ME52N/ME53N in which i can easily check if prerequisites for the "locked field" exist... but there's no visibility over the right SCREEN in that user exit (and also, I tried, in ANY of the std userexit) so I don't know how to tell the transaction "hey, for this order turn the EPSTP (=pstyp in EBAN) grey since it must be not-modifiable".
Can't get at the same time Field Exit to work on this system (46C)

Similar Messages

How to add column in the item overview screen (4900) in sales order?

Hello Experts,
I have a requirement to add a column (Field - Size/Dimensions - MARA-GROES) in the Item Overview Screen (4900).
Is there any provision for that? Any enhancement or screen exit or so?
Quick response will be appriciated.
Thanks in advance.
regards,
hp

Hi
As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
Regards
Eduardo

How to clear the quantity field in the items line from the transaction MIGO

Dears.
I need that the field GOITEM-ERFMG from the transaction MIGO comes blank, but, this field have a default value.
I tried to clear this field in the BADI MB_MIGO_BADI, but, this 'clear' does not work.
Somebody knows, where I can insert an enhacement in the program SAPLMIGO to clear the field GOITEM-ERFMG, ever that the user add a new line?
Thanks and Regards.

Check SAPNotes, there are some that have bug fixes for this issue

Adding a new column to item overview screen 4900 in sales order transaction

Hi All,
I want to add a new column to refer to a custom field in screen 4900 ( Item overview screen ) in sales order transaction. Please suggest appropriate exit or BADI for the same. Give all steps to do the same.
Thanks in adavance.
Jawahar.

Hi
As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
Regards
Eduardo

How to read overall status of line item in Tab Status of Sales Order

Hi Friends,
I need to read the overall status of a sales order line item in transaction VA02.
For example line item 00010, in its status tab under processing status there is a field overall status which has value Open, Completed etc.
I need to read the text like open, completed etc.
Kindly help.
Thanks,
Pradeep

Hi Pradeep,
Try these tables.
Please have a look at below tables.
AUSP
Characteristic Values
CMFK
Storage Structure for the Error Log Header
CMFP
Storage Structure for Errors Collected
FMSU
FI-FM Totals Records
FPLA
Billing Plan
FPLT
Billing Plan: Dates
INOB
Link between Internal Number and Object
JCDO
Change Documents for Status Object (Table JSTO)
JCDS
Change Documents for System/User Statuses (Table JEST)
JEST
Object Status
JSTO
Status Object Information
KANZ
Assignment of Sales Order Items u2013 Costing Objects
KEKO
Product Costing - Header
KEPH
Product Costing: Cost Components for Cost of Goods Mfd
KNKO
Assignment of a Cost. Est. Number to Config. Object
KOCLU
Cluster for Conditions in Purchasing and Sales
KSSK
Allocation Table: Object to Class
NAST
Message Status
SADR
Address Management: Company Data
VBAK
Sales Documents: Header Data
VBAP
Sales Documents: Item Data
VBEH
Schedule Line History
VBEP
Sales Document: Schedule Line Data
VBEX
SD Document: Export Control: Data at Item Level
VBFCL
Sales Document Flow Cluster
VBLB
Sales Document: Release Order Data
VBSN
Change Status Relating to Scheduling Agreements
VBUK
Sales Document: Header Status and Administrative Data
VBUP
Sales Document: Item Status
VBUV
Sales Document: Incompleteness Log
VEDA
Contract Data
Regards,
Vijay

User Specific VA01 Screen variant (item overview tab first then sales tab)

Hi,
One of my user wants to see more number of line items on the sales order creation screen. Is it possible to create user specific screen variant? Like bringing item over view tab first and then sales tab at VA01 screen for one particular user.
Thanks in anticipation.
Regards
Suman Jha

hi,
you have two solutions for your issue.
1. please check the resolution of your desk top which you are working.
2. SAP has fixed the screens like that onlly so please write to SAP if there is any solution on this they will provide because no enhancements or developments or no programs i think we can do that.
regards,
balajia

Which structure field contains the header level net price of sales order ?

Hi Friends,
I am writing a pricing routine for calculating ZSMR condition value in sales order header level. The formula for calculating is (NET PRICE / NET SALES COST) / NET PRICE.
Which structure contains the net price of the sales order in header level. KOMK structure does not contains the net price value.
Any ideas is highly appreciable.
Thanks,
Sakthidoss.

Sivanand,
I can not use VBAK as I have not saved the sales order yet and before that I need to calculate the pricing condition. In the sales order header level, net price is showing. I want to know which structure contains that net price value.
You have any thoughts whether I am in correct path?
I will certainly appreciate your help by rewarding points.
Edited by: dossgs on May 20, 2010 2:13 PM

Enabled (LIKP-ANZPK) No.of packages Field in VL03n (Item Overview tab)

Hi Guru,
I want to edit No.of packages(LIKP-ANZPK) field in display mode in VL03n .
Is it possible, Any one can tell which screen and what is process, How i can made editable field while Display Delivery (VL03N).
Please help me out.
Thanks&Regards
Durgesh

I don't think you should be trying to make changes in display mode.
Rob

Automatic population of Order field in the Account Assignment tab in VA01

Hi Experts,
May i ask if the Order field in the Account Assignment tab in creating Sales Order ( VA01) will automatically populated when the Alt. Int. Ord field in the Additional Data B tab do have values?
If YES, what are the needed configurations to meet this kind of functionality?
Please advise.
Liz

Please through some more light on that.
As per my under standing you want to populate the Value from one field to another field.
If is it so you can do that with the help of good ABAPer who can populate the value from one Location to another Z-Location.

Deliver Plant on Item overview tab of VA01, VA02, & VA03

Hello -
We have an issue when we create a sales order, the field RV45A-DWERK found in the header section of the Item Overview tab is not populated. The ship-to partner has a deliverying plant setup on the customer master.
Once we start entering material on the sales order the item plant field VBAP-WERKS is populated with the delivering plant from either the material master, customer info rec, or the ship-to customer master.
We would like to have the deliver plant at the header section populate with the deliver plant to start with.
We are currently on ECC6 SP4.
Thanks,
Matthew Fee

Dear all,
I came across this thread because I had the exact same requirement.
I was able to implement this requirement in two different ways:
1. Populating VBAP-WERKS in user exit MV45AFZB
FORM USEREXIT_SOURCE_DETERMINATION
*>>>MET@ROFF 11.12.2012 - Set VBAP-WERKS based on user parameter
* DATA: lv_param_value LIKE USR05-PARID.
* DATA: lv_werks LIKE VBAP-WERKS.
* DATA: lv_werks_aux LIKE VBAP-WERKS.
** Clear value
* CLEAR: lv_param_value, lv_werks, lv_werks_aux.
** Get parameter from user data
* SELECT SINGLE parva INTO lv_param_value FROM usr05
*         WHERE bname = sy-uname
*         AND   parid = 'WRK'.
* lv_werks = lv_param_value.
* SELECT SINGLE werks INTO lv_werks_aux FROM t001w
*         WHERE WERKS EQ lv_werks.
* if sy-subrc = 0.
*    VBAP-WERKS = lv_werks.
* endif.
**<<<MET@ROFF 11.12.2012
2. Populating RV45A-DWERK in user exit MV45AFZZ (Better solution)
    FORM USEREXIT_MOVE_FIELD_TO_VBAK
*>>>MET@ROFF 11.12.2012 - Set RV45A-DWERK based on user parameter
   break rf-mteixeira.
   IF svbak-tabix = 0. "Create header
     DATA: lv_param_value LIKE usr05-parid.
     DATA: lv_werks LIKE vbap-werks.
     DATA: lv_werks_aux LIKE vbap-werks.
* Clear value
     CLEAR: lv_param_value, lv_werks, lv_werks_aux.
* Get parameter from user data
     SELECT SINGLE parva INTO lv_param_value FROM usr05
            WHERE bname = sy-uname
            AND   parid = 'WRK'.
     lv_werks = lv_param_value.
     SELECT SINGLE werks INTO lv_werks_aux FROM t001w
            WHERE werks EQ lv_werks.
     IF sy-subrc = 0.
       rv45a-dwerk = lv_werks.
     ENDIF.
   ENDIF.
*<<<MET@ROFF 11.12.2012
I hope this may help other consultants in the future.
Regards,
Moisés Edgar Teixeira

Adding new column to item overview tab of warranty claim

Hi all,
I need to add an additional column to the item overview tab of the warranty claim.( transaction WTY ).
If anyone has done this before then please send the details as to where and how this needs to be added.If added what are the necessary tables which needs to be updated.Is there any BADi or user exit to change and update this data .. ?If not how can this be done .. ?Is this a feasible requirement.. ?Please let me know soon.
Cheers
Nishanth

Hi Neelima,
Please investigate the use of customer fields for meeting this requirement.
Regards
Azad

Adding customer field into BID item Overview

Good afternoon,
(SRM 5.5)
I have added the customer field in the BID.
Is it possible to show it, in the "Item Overvier of BID"?
Alexey

Hi,
Generally through the INCL_EEW* structures,you can add the custom fields for the Bid Item only under the BASIC DATA tab.If you want to show up a field on the Item overview screen,then this will need std code modification(screen modification) or need to modify the HTML template for the BID item overview screen in the ITS service BBP_QUOT which will need lot of HTML expertise.
Hope this helps.
BR,
Disha.
Do reward points for useful answers.

Creation of additional drop downs in 'Item overview' tab page on portal

Hi,
I would like to know how do we add additional fields/drop downs on the xRPM portal in the 'Item Overview' tab page.
For eg:
We are having TECHNOLOGY TYPE field at Item overview tab page in xRPM portal - Portfolio Management view. Wherein we can have different dropdown values for selection.
Question 1 -> Can we have similar dropdown created on the same page? If yes, how?
Question 2 -> If we want to create more than one such dropdowns with their own defined dropdown values, can we maintain the dependency between them ?

I went through the document on the mentioned by you.
But my requirement is a bit diiferent.
I want to have 3 different drop downs with a numeric field attached to them.The sum of these numeric fields should always be 100 (two values are manually selected but the third value should be calculated automatically based on the previously selected values).
Example,
I select 10 as a value for Drop down 1, 40 for drop down2 then for the drop down3 the value should populate automatically as 50 (100 - (10+40)).i.e. the sum being 100.
Can you or any one please help me with this.
Also I am not sure how do we give multiple options for selection (like 10,20,..50 etc upto 100) for a drop down.

Delivery date in Purchase Order in the item overview

Hi all,
In which table is Delivery date in Purchase Order in the item overview stored.
the screen field name is eeind.
Thanks

In table EKET in field EINDT the delivery date is stored, based on the Schedule lines in the PO Item

I need to make the ordered quantity field (RV45A-KWMENG) disabled in 'VA02'

Hi SAP COMMUNITY,
I have urgent requirement for which i did'nt worked before on this requirement. I hope you people can help me in this regerd.
My requirement is, I need to make the ordered quantity field (RV45A-KWMENG) disabled in the transaction code is VA01/VA02. User should not be able to edit this ordered quantity in VA01/VA02 Transaction.
Here the condition to disable this field ordered quantity is IF ORDER TYPE EQUAL TO OR AND IF ITEM CATEGORY EQUAL TO TANN in technical IF VBAK-AUART EQ OR AND IF VBAP-PSTYV EQ TANN then only the field (RV45A-KWMENG) ordered quantity should be disabled in that transaction VA01/VA02.
Correct me if iam wrong, I think in the program SAPMV45A and do we need to include any screen number which i have seen in VA02 is 4001. Do we need to write a code in Include MV45AFZZ (FORM USEREXIT_FIELD_MODIFICATION.). But i don't know what code i need to write here to disable this field.
I had searched in the forum some example code so please suggest me whether i can use this and if i can use this please suggest me how to write the condition and insert the code in that FORM. If this sample code is wrong then please suggest me what exact code should be given. Can anyone help. Quick response will be much appreciated.
Looking forward for ur prompt replies.

As per my understanding , To disable the field RV45A-KWMENG based on the condition for Transaction VA01/VA02.
The conditions which i need to check is Order Type and item category.
I understand that this is the code which i need to insert for disabling the field but i have a question here, where is the condition here and how the system understand for this field RV45A-KWMENG it has to disable. I think we need give the condition as if RV45A-KWMENG....... Another one if iam not wrong we need check that it has to be done in VA01 and VA02 then only this condition should be executed.
IF VBAK-AUART EQ 'XXX' OR VBAP-PSTYV EQ TANN .
IF SCREEN-NAME = 'XXX'.
SCREEN-ACTIVE = 0
ENDIF.
ENDIF.
Please suggest me the better way how can i do it in the coding.
Awaiting for ur prompt reply.

Order quantity field in the item overview tab of a sales order

Similar Messages

Maybe you are looking for