ORDERS Inbound EDI1 Condition type not getting updated

Hi Experts,
        As per the client requirement, during ORDERS Inbound process we need to capture the "Customer expected Price" in EDI1 Condition type in the sales order. So we maintained the details in the E1EDP01 in field VPREI.
But during ORDERS Inbound process this EDI1 field is not getting updated. Can anyone please help us on this.
Warm Regards,
VEL

Problem of our ABAP coding distrubed the std functionality. In std SAP, this functionality will work without any issue.

Similar Messages

  • NAVM condition type not getting updated in PO with account assignment K

    Hi Sap Gurus
    Pls help me resolving this issue
    We had created a PO (K-Acc Assignment) with certain tax percentage (16%) in the past .When we view the PO in display mode we can see the equivalent value of 16% being appearing in NAVM at item level.Further on when we hit the Invoice TAB and try to view the taxes.We can see the net price being updated in BASB condition type,and the equivalent value of 16% being updated in AP1I.
    This looks to be perfect but when we again go back to he same PO screen from Tax Screen the value that had intially appeared in NAVM(equivalent of 16 tax%) becomes zero.This happens so for the old PO.
    But for new PO nothing is appearing in NAVM condition tab in PO item level,inspite of the fact that some tax percentage has been maintained.Again this tax percentage can be viewed from Invoice TAB and it takes part in the calcualtion updating th AP!I key mentioned earlier.SOme changes have been made in the config due to which all new POs being created now as no value being updated in NAVM tab inspite of maintaining the tax percentage.
    All other  std settings have been used.
    Additional info:
    In the pricing procedure from FICO side..for the condition type AP1I accrual key NAV is used.
    It has the access seq MWST.
    cond class,claculatio type,cond category  for AP1I being: Taxes,percentage,Tax respectively
    AP1I is not marked as statistical.
    NAVM has no acess seq.
    cond class,claculatio type,cond category  for AP1I being: Taxes,Fixed amount,Input Tax not deductible(N) respectively.
    NAVM is marked as statistcal
    pls give me some leads so as to identify why the value does not appear  in NAVM condition type

    system wont generate any controlling document for noted items  downpayment and normal payments.
    Because all are balance sheet accounts. Controlling documents will generated for only P&L accounts.
    Your analysis correct.

  • VA00 condition type not getting determined for the returns order

    Hi All,
    I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
    When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
    Note:VA00 condition type is getting deleted from the  internal table tkomv[].
    If any one came across  this scenario can you please help me.
    Request your valuable inputs

    Hi,
    Please check the copy control setting in VTAA.
    Maintain the pricing type as "D" at item category level for the respective document type .
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • EDI1 Condition type not determined automaitcally in ORDERS process

    Hi Experts,
             We are in the process of creating the Sales order by receiving EDI data from customer and converting in to IDOC format and trying to create the sales order. While executing the ORDERS IDOC message type sales order is getting created successfully. But Condition type EDI1 is not getting activated even after maintaining the value in E1EDP01-VPREI.
                       During foreground mode, if we maintain the EDI1 condition type manually then, its accepting without any issue. But during IDOC process its not getting added automatically.
    Please give your suggestion on this.
    Warm Regards,
    Nag

    Problem with the IDOC FM. We identified and rectified the issue. Thank u

  • Statistical condition types not getting displayed in invoice

    We  have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
    In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
    Thanks & regards
    Puneet Agrawal

    Hi
    Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
    If the condition type for taxes is coming then you can print the taxes.
    First check the related condition type for Taxes in T685 table and see here in the code.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • VPRS condition type not getting computed while retro billing.

    Dear All,
    I have an issue while generation of Reto billing using the T.Code : VFRB.While running VFRB the values are getting computed correctly and the supplimentary debit / credit note gets created.
    But the values for the condition type VPRS is not getting computed and getting transfered to CO-PA.
    On pricing analysis agaist VPRS i am getting the message (Condition ignored (requirement 004 not fulfilled)).
    The Item category used is TAN and the Determine cost Indicator is marked.Also while doing a sales invoice the VPRS condition type is getting computed and the value is posted in CO - PA.
    What would be the reason for the error .Could some one suggest a solution .Kindlye help.
    Regards,
    K.Vivek

    Hello vivek,
    this is usually caused by userexit. Please check  userexit_pricing_prepare_tkomp userexit_number_range using in rv60afzz.
    Best regards,
    Ivano.

  • RFx - Upload thru excel - Condition data not getting updated

    Hi all,
    In SRM7.0
    I've implemented BBP_PD_DOWNLOAD badi to change the download upload format of excel.
    All fields from my excel are getting updated, but item conditional data is not getting updated. Any notes, or something ???
    Throw some light please !
    Regards,
    Ashwin.

    OSS supported us by creatin a Note for this.
    Hope this is covered in the support packs of new releases.

  • Condition type not getting populated at first line item of Sales order

    Hi Experts,
    We are creating Sales order through IDOC(Inbound function: IDOC_INPUT_ORDERS) for Document type ZXX then condition type is geeting populated at both line item, i have tried creating the Sales order through IDOC for document type ZYY the condition type is not getting populated in first line item, but for secod line item condition is getting populated.
    we also checked pricing procedures related to this document types and we found these pricing types are mentioned in corresponding pricing procedures.
    Let us know  there are any other possible ways to find the same
    please help.
    Thanks!

    Hi Rajani,
    check the user exit in the FM..IDOC_INPUT_ORDERS
    check if any filters kept for condition type field..
    check the belwo user eixuts
    ORDCHG I VEDB0001 Sales Ord. Change
    ORDERS I VEDA0001 Sales Orders..
    Regards,
    Prabhudas

  • EDI1 Condition Type - Not picking up Net Value - Document Incomplete

    Hi EDI Gurus,
    I have a quick question.
    I am processing an EDI Sales Order through Inbound Orders IDoc.
    When an IDoc is triggered, the EDI1 pricing condition is getting the customer expected proce from E1EDP01-VPREI. But it says document incomplete.
    Complete Data:
    Item 000010: Net Value missing
    Why I am i getting this??  What should be done?? Where??
    I also heard that we can make the order block, if EDI1 price is different from PR00 price. How to place delivery block?
    Can you please explain.
    Thanks.
    Matt

    I figured out the problem. the price for the material was not maintained in the PR00 pricing condition.
    The EDI1 condition was OK.
    Now , i have a question regarding the comparison between, standard SAP price (PR00) and customer expected price (EDI1).
    Where do we do the comparison. If cust expected price is not acceptable how we gonna put a delivery block.
    Do i have to implement this in Inbound Orders user exit or should I implement this elsewhere??
    Who is the owner of this process EDI or SD??
    Thanks,
    Matt

  • Condition types not getting displayed

    i have uploaded a smartform & copied the standard program(/SMB40/FM06P) of it into my system.the condition type texts & their amounts are getting displayed  for import purchase order(conditions are getting picked from me22n--->conditions) but for domestic invoice  im unable to display condition type texts & their amounts.(these are picked from me22n-->invoice---->taxes).
    in program lines this code exists.
    <FS>   like EKPO.
    <KO>  like  KOMV.
    input parameters            output parameters
    ZXEKKO                        G_KSCHL
    L_NETWR                      G_VTEXT
    <KO>                             G_KWERT
    G_VTEXT                        G_FRAKWERT
    G_FRAKWERT               G_TAX
    G_TOTAL
    <FS>
    G_TAX
    L_KWERT
    CLEAR: g_vtext,g_kwert,l_kwert.
    CHECK NOT <ko>-kwert = <fs>-netwr.
    Get Condition Type Text from table T685T and the value
    SELECT SINGLE vtext INTO g_vtext FROM t685t
    WHERE spras = sy-langu
    AND kschl = <ko>-kschl.
    IF sy-subrc = 0.
    MOVE <ko>-kwert TO g_kwert.
    ENDIF.
    Check document currency
    IF NOT l_netwr IS INITIAL.
    WRITE g_kwert TO l_kwert CURRENCY zxekko-waers.
    ENDIF.
    *Determine if the discount is based on %
    IF g_vtext CS '%' OR
    g_vtext CS 'percentage' OR
    <ko>-kschl = 'SKTO'.
    <ko>-kbetr = <ko>-kbetr / 10.
    MOVE '%' TO <ko>-waers.
    ENDIF.
    Determine Tax
    IF g_vtext CS 'tax'.
    ADD <ko>-kwert TO g_tax.
    CLEAR g_kwert.
    ENDIF.
    Determine Freight Charges
    IF g_vtext CS 'Freight'.
    ADD: <ko>-kwert TO g_frakwert.
    CLEAR g_kwert.
    ENDIF.
    i feel the data is coming from above code only.please suggest where i have to make changes so that it picks data from ME22N->INVOICE--->TAXES which has conditions for domestic purchase order.please help.

    Hi
    Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
    If the condition type for taxes is coming then you can print the taxes.
    First check the related condition type for Taxes in T685 table and see here in the code.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Pricing: New condition type not getting listed in options in product master

    Hi,
    I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this  condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
    Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
    Regards,
    Meenakshi
    Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
    Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

    Hi Meenakshi,
    you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
    Best Regards,
    Michael

  • CRMXIF_ORDER_SAVE: Condition values do not get updated

    Hi,
    I am trying to change the value of a condition record on a contract using APPL_IDOC_INPUTM (IDOC Type APPL_IDOC_INPUTM; Message Type CRMXIF_ORDER_SAVE_M; Function CRMXIF_ORDER_SAVE). I pass 'U' to the Object_task and populate the new rate in the condition  table E101CRMXIF_BT_PRCD_COND. I set the values for the corresponding E101CRMXIF_BT_PRCD_COND_F and E101CRMXIF_PRCD_COND_XT tables too. However, the pricing condition does not get updated on the contract.
    Anyone worked on this before and knows the reason or what am I missing?
    Thanks
    Prayarna

    Hey,
    Did you solved this? can you please let me know how did you do this?
    Regadrs,
    Sarath. J

  • Condition type not determined

    Hello All,
    I am using COPY CONTROL to create contract through VA41.
    Problem i am facing is condition type not getting picked up at item level, though correct pricing procedure is getting determined. In that pricing procedure this condtion type is maintained but still it is not picking the condition type.
    Rushikesh

    Hi,
    Can you check condition type detailed screen"Manual entries" field,the value in that field is either B or D.
    Regards,
    Chandra

  • Tax is not getting updated in Sales Order Pricing Conditions

    Hi ,
    Tax is not getting updated in Condition of sales order when creating Sales order but when we click on update button it is calculating correctly.
    Following are the changes for in the standard Pricing:
    1) Created ZPSC condition type to calculate the sur-charge from Z-table
    2) ZPR0 Condition type to calculate the sum of PR00 and ZPSC
    So tax has to be calculated based on the ZPSC value, but it is calculating the tax based on the PR00 base price.
    We implemented the logic for updating values of  Amount and condition values for ZPSC and ZPR0 by creating custom Routine 904 in Calculation types and assigned the routine in Pricing Procedure.The correct values are coming till NET VALUE 3 but tax is calculating based on the PR00 net price.
    I debugged the code for Tax Routine the value for Net value (NETWR) is the base value price but displaying correctly in Net value screen of Conditions tab.
    Please suggest how to update the Tax values correctly without manual update.
    Thanks ,
    Rajesh Sanapala.

    Hi Lakshmi,
    I am using a TAXINN procedure.....to correct my self can u brief me abt the CIN configuration settings required from SD point of view......how many tax codes have to be maintained for capturing the BED,EDCess,SHED cess,VAT,CST and what are the condition types required for capturing the same.....
    I am using JEXQ-A/R BED ......for capturing the BED....and so on ......I feel that i have missed out on some settings ,thats why few conditions are getting captured and some are not.....It would be great if you ca nhelp me on this.
    Thanks
    Ivy

  • KONV not getting updated with new condition type value

    Hi,
    I have created a new condition type for a pricing procedure. But table KONV-KAWRT is not getting updated with any value. Can anyone help me this.
    Thanks
    Shweta

    Hi Vasu,
    It was created in the same way then I have assigned calculation formula . For invoice it is comming fine but for the intercompany billing it is not showing any value in Contition tab for this particular condition type. For this when I checked in KNOV table it is showing condition type but the value (KONV_KAWART) is comming out zero and due to this reason it is not showing value in intercompany billing ->condition. Do I need to write code for this?
    Thanks,
    Shweta

Maybe you are looking for

  • Event is not triggering in swel

    Hello Gurus, i have used a subtype business object zbus2009 of bus2009. and i have deactivated the event of bus2009 in workflow. now i am using there this subtype zbus2009. but in swel while i am checking after creation, no event is triggering here,

  • Fill Multiline container from multi records in source XML ?

    Hi, scenario: File-XI-RFC-File(BPM). Read company id from source file, call BAPI(company_get_detail) using RFC receiver adapter and then write response to another file. This works fine for one record(one RFC call to BAPI) using the BPM. Now, I would

  • Hold on what key to reinstall the imac

    I do not know how to reinstall the OS. It is because I will change the hardisk by apple center. I want to reinstall my imac. Let the imac no personal date in imac. when power on i forgot hold on what the keyboards key to reinstall the imac. i has a i

  • Help with mapping the mod_plsql path with Apache

    Hi, I need help with mapping my pl/SQL Handler path. Currently i have an URL like this : http://myhost.com/pls/DADUSER/PLSQLPROC?param1=123 But I need something like : http://myhost.com/d/PLSQLPROC?param1=123 I tried to rename the "Location Handler"

  • Firefox Problems with Flash Button alignment

    Hey Forums, I am using Dreamweaver CS3, for a website. For the page I used a 3 column elastic with header and footer. On the left sidebar I have four flash buttons, and whenever I preview the page in Mozilla Firefox, the upmost button for some reason