Org.apache.tomcat.TcpConnection source not found error.

Hi,
When I tried to remotely debug a servlet with Sun's J2EEServer, instead of stopping at the breakpoint the Jdev31 stopped at this line:
//JDeveloper API Decompiler STUB ...
and when I pressed F8 a messagebox appeared:
org.apache.tomcat.TcpConnection source not found.
I think that I have missed someting installing the JDev.
Your prompt help is higly appreciated,
Reza

Hi,
I just had the same problem and navigated to this page here in hope for a solution...
However I've solved the problem now. On Eclipse, do the following.
1) Right-click on the added Jar-file (which is producing the problem)
2) On the popup-menu choose "Build Path" and "Configure Build Path..."
3) On the opening preference window, click the checkbox of the Jar
This is probably necessary because the jar has to be exported such that the simulator is able to execute it.
Greets,
Juri
http://juri-strumpflohner.blogspot.com

Similar Messages

Error: Provider org.apache.xerces.jaxp.DocumentBuilderFactoryImpl not found

HI.
I embed tomcat in my application.when i start embed tomcat ,the following message appears :
javax.xml.parsers.FactoryConfigurationError: Provider org.apache.xerces.jaxp.DocumentBuilderFactoryImpl not found
at javax.xml.parsers.DocumentBuilderFactory.newInstance(DocumentBuilderFactory.java:99)
at org.apache.commons.modeler.util.DomUtil.readXml(DomUtil.java:284)
at org.apache.commons.modeler.modules.MbeansDescriptorsDOMSource.execute(MbeansDescriptorsDOMSource.java:130)
at org.apache.commons.modeler.modules.MbeansDescriptorsDOMSource.loadDescriptors(MbeansDescriptorsDOMSource.java:120)
i set System.setProperty("javax.xml.parsers.DocumentBuilderFactory", "org.apache.xerces.jaxp.DocumentBuilderFactoryImpl");
,but not work.
by the way :my classpath include xercesImpl.jar & xmlParserAPIs.jar, when i remove them ,my application
work well.

by the way my classpath include xercesImpl.jar & xmlParserAPIs.jar, when i remove them ,my application work well.
Is another jar file which has the org.apache.xerces.jaxp.DocumentBuilderFactoryImpl clas in the Classpath.?

Exception :Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found

Hi All,
I run my application on Redhat Linux 2.4.9-e.27smp using java appname. I'm using JDK1.4.2 and am not using any app server. The app seems to run just fine for a few hours and then I start getting Exception :Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found exception out of blue. I run the app with following parameters -
java -server -XX:+UseAdaptiveSizePolicy -Xverify:none -Xms512m -Xmx512m -XX:+UseParallelGC -XX:ParallelGCThreads=4
I suspect this has to do with garbage collection and can't replicate this on will. I wonder if anyone has come across similar issue and is able to point me to the right direction.
Thanks for any help,
Vishal Bhasin

Quick question. I am receiving the following error too:
Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found
I am getting this error intermitently. Do you have any idea why this would happen. I am using an add on to a program.
Thanks,
Joe

Org.apache.struts.action.ActionServlet not found in web-application

Dear All,
I am new to ADF environment. I tried to create a simple page to show the records from
a table . I followed the sample application which is available in "Building Oracle ADF Applications: Workshop".
When i run my action from Struts Page Flow. It is giving error like
500 Internal Server Error
Servlet error: Error instantiating servlet 'action'. Servlet class org.apache.struts.action.ActionServlet not found in web-application EmpMaintanance-ViewController-webapp
anybody can suggest me What i missed?
Thanks in advance...

Hi,
you need to register libraries with th OC4J configuration files. However, you can also deploy the Struts library with you application (see OC4J documentation which is accessible on OTN via Oracle As documentation), in which case they are available from the application classpath
Frank

Source Not Found Error while Debugging

Hello,
I get annoying Errors while debugging a midlet. I reinstalled all programms an created a new midlet suite + midlet but the error is still there and the Midlet doesnt start.
i got Eclipse Version: 3.2.2, Eclipse ME 1.6.6, the newest WTK 2.5 and java.vm.version=1.6.0-b105.
I configured everything like www.eclipseme.org says it would be correct.
Running a Midlet works fine.
The bug opens an Helper.class file which says:
Class File Editor: Source not found: "The Jar of this classfile belongs to the container J2ME library [ Sun Java (TM) Wireless Toolkit 2.5 for CLDC/MediaControl]. To configure the source attachment, go directly to the corresponding configuration page (For example for JRE go to 'Installed JRE#s page in references).
Any clou how to fix this?? I need to debug my midlet :-/
THANKS!
Byby
pako

Hi,
I just had the same problem and navigated to this page here in hope for a solution...
However I've solved the problem now. On Eclipse, do the following.
1) Right-click on the added Jar-file (which is producing the problem)
2) On the popup-menu choose "Build Path" and "Configure Build Path..."
3) On the opening preference window, click the checkbox of the Jar
This is probably necessary because the jar has to be exported such that the simulator is able to execute it.
Greets,
Juri
http://juri-strumpflohner.blogspot.com

"Source not found" Error creating URL Data control with query parameters

Hi,
I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
Just dont know what could be the issue. Please help
Thanks

Hi,
xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
Frank

Urgent: Why org.apache.tomcat.* package does not exist?

i am writing some programs about ldap
my program code has used some packages as the followings
import org.apache.tomcat.core.*;
import org.apache.tomcat.util.*;
import org.apache.tomcat.util.xml.*;
i am using apache + tomcat4.1 server, jsdk1.4
i have set the classpath that contains all the jar files in $TOMCAT_HOME\common\lib
after setting the classpath, i compiled the code
it said the above packages does not exist
where should i find those packages?
Aren't they in the tomcat i installed?
PLX HELP

for example, i want to use the class
org.apache.tomcat.core.Context to create a class
object.Then you would want to:
import org.apache.tomcat.core.Context;
-or-
import org.apache.tomcat.core.*;
Note how that is different than your original:
import org.apache.tomcat.*;i just use as an example import org.apache.tomcat
but i cannot find org.apache.tomcat.core or even any org.apache.tomcat.*
so that means i havn't include the correct jar file in the classpath or no corresponding package are stored in the tomcat4.1
i just want to know what jar file contains such stuff.
i think it should be a silly problem. So there should be someone know it.

URGENT: JAXP Provider org.apache.crimson.jaxp.SAXParserFactoryImpl not foun

Hi all
I am having this strage problem. I am using JAXP Apis to do XSLT transformation and everything works fine.
But when I try the samething with
-Djava.security.manager option and
-Djava.security.policy==$WL_HOME/weblogic.policy option set it doesn't work. Stranger still the error it gives:
javax.xml.transform.TransformerException: javax.xml.parsers.FactoryConfigurationError: Provider org.apache.crimson.jaxp.SAXParserFactoryImpl not found
This the command that works:
$JAVA_HOME/java -classpath $WL_CLASSPATH -Dintegration.config=$WL_HOME/integration.cfg com.swl.integration.translation.SendPRThread 24972 451
This one does NOT work:
$JAVA_HOME/java -ms64m -mx64m -verbosegc -classpath $WL_CLASSPATH -Djava.security.manager -Djava.security.policy=$WL_HOME/weblogic.policy -Dintegration.config=$WL_HOME/integration.cfg com.swl.integration.translation.SendPRThread 24972 451
I know it's something to do with Security manager/policy setting, but can't figure it out.
Could anyone please help? It is very urgent.
Thanks a lot
Mak

I have your solution... under Weblogic BEA were giving the same error, I resolved it with this code before the instantiation of SAXParserFactory:
String key = "javax.xml.parsers.SAXParserFactory"
String value = "org.apache.xerces.jaxp.SAXParserFactoryImpl";
Properties props = System.getProperties();
props.put(key, value);
System.setProperties(props);

Debugger: 'Source Not Found"

I have a simple WebDyn Pro application that works fine on my local J2EE engine, but would like to see the execution of one of my methods in debug mode.
I setup my break points and run the application in debug mode and start executing the program line by line on my local J2EE engine. The first few lines work fine, but then I get a "Source Not Found" error for the Node.class
The full error is message is:
The source attachment does not contain the source for the file Node.class. You can change the source attachment by clicking Change Attached Source Below
Clicking on the "Change Attached Source" button shows the following location variable path:
WD_RUNTIME/com.sap.tc.webdynpro.runtime/lib/_webdynpro_progmodel.jar
and below that, the full path is shown
C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.webdynpro.runtime\lib\_webdynpro_progmodel.jar

I have do have the _webdynpro_progmodel.jar file in the above mentioned folder, so why am I getting this error?
Thanks in adavnce,
Stefan

Maksim,
Im wondering if there is a way I can avoid having to go through the node class(and others) when I am debugging.
I would like to only have to go through my own classes and skip the rest. I tried the step filter, but that did not help. I have the following in my filter configurartion
com.ibm.*
com.sap.*
com.sun.*
java.*
javax.*
org.omg.*
sun.*
sunw.*
java.lang.ClassLoader
Thanks again,
Stefan

WL 10.3.3 Console org.apache.xalan.processor.TransformerFactoryImpl not fou

Getting the following error:
An error occurred during activation of changes, please see the log for details.
[Management:141191]The prepare phase of the configuration update failed with an exception:
Provider org.apache.xalan.processor.TransformerFactoryImpl not found
Note: we have the FOP added to the domain as a shared library with the following libraries:
avalon-framework-cvs-20020806.jar
batik.jar
fop.jar
xalan-2.4.1.jar
xercesImpl-2.2.1.jar
xml-apis.jar
Note: Also, the shared libraries are not displaying referencing applications

Getting the following error:
An error occurred during activation of changes, please see the log for details.
[Management:141191]The prepare phase of the configuration update failed with an exception:
Provider org.apache.xalan.processor.TransformerFactoryImpl not found
Note: we have the FOP added to the domain as a shared library with the following libraries:
avalon-framework-cvs-20020806.jar
batik.jar
fop.jar
xalan-2.4.1.jar
xercesImpl-2.2.1.jar
xml-apis.jar
Note: Also, the shared libraries are not displaying referencing applications

Error in setting up debugging: Source not found for Catalina.createStartDigester() line: 280

I am trying to set up the development environment using Portal (5.0.4), Eclipse and Tomcat-4.1.30-LE. I've set up Eclipse according to the instruction of "Debugging portal source code: Eclipse".
I got the following error when I select "Run | Debug" in Eclipse and Tomcat won't start.
Source not found for Catalina.createStartDigester() line: 280
Has anyone seen this before? How do fix it?

maybe this is just because there is no source code for the JCO Classes. I don't think SAP ships JCO Classes with source Infos for debugging.
In debugging i would suggest just not to step into the JCO Methods.
franz

"Page not found" error while fetching data using tomcat

Hi all
We have a java web application that runs on a distant server . The web server is apache tomcat . The database used is oracle. We upload large data to the site and generate various reports. We are using servlets for this purpose. But when there the amount of data fetch is larger, the browser shows "Page not found" error . We tried to increase the time out of the web server but it didnt work . Is there any solution to this problem ?
Thanks & Regards
Ashish

Yup, don't fetch everything at a go!
Google around for optimization techniques. I know one site called "javaperformancetuning" or something of that sort. It has some interesting articles on how to do this.
Rich.

Report Generation Toolkit (Word) : How to use correctly bookmark and cross-reference without "Error! Reference source not found"

Hi,
I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
Can somebody help me please!
Nki
Solved!
Go to Solution.
Attachments:
01.jpg ‏72 KB

Hi,
When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found".
I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.
I use Labview 2011 and Micosoft office 2010.

Apache plug-in prob : when trying to access '/weblogic/' URL , "404 : file not found" error is shown

On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server HTML
page, welcome file, or default servlet, as defined for the default Web Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not found" error.
What other configuration is needed ? Do I have to specify '/weblogic/' name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
S

Forgot to mention , I've also added following configuration in httpd.conf :
LoadModule weblogic_module modules\mod_wl_20.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7501
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
"S" <[email protected]> wrote:
>
On : Apache 2.0 , Weblogic 7.0, Win 2000
I installed the Apache plug-in for as described in WL docs, but when
I try to
access a URL /weblogic/ ( supposed to be configured automatically ) on
apache,
I get '404 : file not found' error.
As per the docs, I did following config in Apache:
1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory
to the
APACHE_HOME\modules directory
2. Added to httpd.conf :
LoadModule weblogic_module modules/mod_wl_20.so
3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
-t '
4. Restarted WL & Apache.
Now, the weblogic documentation says,
"Test the Apache plug-in by opening a browser and setting the URL to
the Apache
Server + "/weblogic/", which should bring up the default WebLogic Server
HTML
page, welcome file, or default servlet, as defined for the default Web
Application
on WebLogic Server. For example:
http://myApacheserver.com/weblogic/".
For my server, 'http://localhost/weblogic/' - I get a "404 : file not
found" error.
What other configuration is needed ? Do I have to specify '/weblogic/'
name anywhere
else in Apache configuration file ?
Any pointers will be appreciated.
Thanks,
S

Error 1311 source not found

All Basis,
Any idea on this,
When tyring to open a Excel from SAP, the Error 1311 source not found throws up.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Org.apache.tomcat.TcpConnection source not found error.

Similar Messages

Maybe you are looking for