Org unit with extenal number range

hello comunity.
I want to create a org unit using the BAPI to create BP, assigning the BP role BUP004 (org unit) and after that assign it manually in the PPOMA_CRM txt.
The problem is that the system doesn´t allow to create a Org unit in txt BP, the error R1422 appears in the screen "It is not possible to create organizational units".
Do you know how to do it?? Do you know if I could use the BAPI_BUPA_CREATE_FROM_DATA??
best regards

Hi.
I think there are some BAPI that corresponds to creation of Org Unit, then you can create a BP and the BP Role then assign it to Org Unit but not sure that you will find all in the same function module. On the other hand you can check more about Org. Unit in the following url:
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/82/25733bb3f4792ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/82/25733bb3f4792ee10000000a114084/frameset.htm</a>
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/bb/bdaff3575911d189240000e8323d3a/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/bb/bdaff3575911d189240000e8323d3a/frameset.htm</a>
Hope it helps.
Armando

Similar Messages

Root org. unit with External number range

Hi all,
I have a unique requirement.
We need to create a root org. unit. I used PP0CE to do the same. But it would generate org. unit numbers internally i.e. system generated.
We would like to assign an external number range to the root org. unit created.
In case I try to create it using PP01, we have to provide a relationship to other org. unit while creating root org. unit in PP01.
It would be great if someone can tell me the solution for this issue.
Regards,
Bharat

Hi Bharat,
You can maintain number range even for org units, as follows:
Here
01 - plan version
A, C, O, P etc are object types
after selecting the respective ie 01O IN Ex ,
now click on maintain number range where you can clearly specify the number range either internal or external.
Then u can start with TC PPOCE
Thanks
Sai

Create vendor in ERP R/3 with internal number range

HI,
When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
According to sap note 1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
Kind regards
Jonna

We have worked around these problems in the past. These are the steps we took:
1. We created a custom program to process a CREMDM IDOC. This custom program was pretty simple. It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ. The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
2. Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
3. The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM. This was necessary to update the vendor number in MDM.
Tom Belcher

Account group with Internal Number Range

Hello Gurus,
With Internal number range assignment to the Customer Account Group, I am unable to extend the customer from one sales area to another sales area with the same Customer number.
If I am not it is a standard feature that irrespective of the number range (internal or external), with the same customer number, customer can be extended to multiple sales area.
Please correct me if I am wrong and suggest a solution.
Thanks in Advance

Hello friends,
No error message but the next number is getting allocated.
in VD01 or XD01
the following steps r followed.
1. Enter the Account Group
2. Sales Area (New Sales Area for the customer)
3. Reference Customer.
4. Reference Sales Area.
Rather than going to the sales area directly, General area screens are appearing.
Upon saving saving the details New customer number is getting allocated.
I have no clue where I have gone wrong...
looking forward for suggestions.
Regards

Org Unit with more than one Chief Position

Hi,
we have implemented MSS via the portal using a one-to-one relationship between Org Units and Chief Positions, and we would now like to have multiple Chief positions attached to one Org Unit.
As far as I can tell from the SAP documentation, this should be straightforward, but the results we are getting do not seem correct.
I have an Org Unit that has position 1 and position 2 assigned to it with relationship A/B 012 denoting that they are Chief Positions.
User 1 is holder of position 1 and user 2 is holder of position 2.
Both users have the same security roles.
The views used on the portal are configured using the MSS Object and Data Provider functionality, using the standard ORGEH view, evaluation path for root objects SAP_MANG and evaluation path objects SBES. The checkbox 'Excl. Managers' is ticked.
The problem is this - both users can see all the subordinate employees in the Org Unit when they log on to MSS but user 1 can also see user 2 in his list of employees, which is not correct as user 1 and user 2 are both chiefs. User 2 cannot see user 1 in his list of employees, which we would expect.
The only logic we can see for user 1 being able to see user 2's details is that user 1 must be somehow defined as the 'superior' Chief Position, but we have not defined this as far as we know.
Any ideas as to why this is happening for us?
Many thanks,
Fran.

Hi Fran,
Sounds like you have set up the reporting structures and MSS properly. I do question why two chiefs for one org unit. As you stated, both can see all employees and so both can approve time, give pay increases, etc. without the approval of the other. If this is want you want, then you have set it up properly. Usually, one has to approve the actions of the other, thus, is in a superior relationship. This can be handled by having a higher level new org unit with the higher person as chief and the lower stay as head of the lower org unit which reports to it.
As you have it now, both individuals have the same rights and access. They should both be excluded from iViews if you checked the "Excl. Managers" box. Since, you just recently made one a manager, have you checked for any date dependencies? If the Chief #1 is selecting a view for "Current Year", for example, he would be able to see all persons who reported to him for this year, which includes Chief #2. There are no 'superior chief' designations (except by structure), so without being able to view your configuration, my suggestion is to check all dates for the assignments and relationships vs. dates of the view.

Org. Mgt. Number range

Hi,
I am uploading the Master data for OM objects & Relationships. Before uploading I have made the change in the number range it as fully EXTERNAL(1 to 99999999) number range and uploaded the objects with the object no. from the text file.
Finally again I have made the change in the OM. to INTERNAL number range. and updated the current last object no. in the current no. field.
And I have checked one sample manual entry directly in SAP, its creating successfully with one problem.
Ex. If the last no. updated in the spro is 50000219 means, the newly created OM object will be 50000220. After creating 50000220 no. in OM, its wrongly updating in the SPRO with the difference of 25 nos. as 5000045 instead of updating the last no. 50000220
Please guide me to locate the problem.
Regards,
Rajakumar.S

Hi,
maybe too late but the best thing to do is create an exnternal number range (for your upload) and an internal number range for data maintenance simultaneously with excluding number ranges.
Wilfred.

Sd invoices posting with External number range

Hi,
i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number range?
while posting it is giving error like use internal number range.how to over come this.help me
Thanks
Prathima

Good Afternoon Prathima.
Use tcode OBA7
Look for Doc type RV Billing Doc trn.
This doc is generally used for posting Billing doc to accounting.
Here you would find Number range as external.
Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
Hope it solved your query. Kindly reward.
Take care. JP.

Purchase Order (PO) Inbound with external number range

We need to create a interface for Purchase order Inbound.
The PO will be created in 3rd party system, and the information is sent thro IDoc(Orders05). How do we create a PO in SAP with the same PO number as in 3rd party system.
We have allowed PO with external number range.
I couldnt find a Segment or field where the PO number can be mapped in the IDOC.
Points will be offered for useful informations.
Thanks,
Sivaraman

Hi Sivaraman,
could you tell me how you solved it. I have the
same problem and didn't find the solution yet.
Thanks a lot!
Horst

Create Equipment with same Number rang at Diff Equipment Catagory

Hallo Guys,
client bymistake created some equipments which are actually PRT with catagory M ( Machine)
now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
as that of made at machine, but as per std system is not allowing to create duplicate records.
How to achive this ?
Regards,
Rip

If no Equipments were created after the Deleted Equipments then you may have an option.
Tcode OIEN
Go to Number range interval, Then the Current number can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
Jogeswara Rao K

Org Unit Business Partner number missing

Hi Guy's
I have created some Org models with some Org units and positions in it... But for some reasons I could not able to see any business partner numbers assigned to these Org units..... I hope these numbers automatically come from CRM system...
Could you tell me is it a Technical issue or Functional issue???
Please let me know if you have any solution to resolve this
Thank you very much in advance....

Hi Sr,
To get the role 'organizational unit' for BP make sure you have HRALX - OPROL - BUP004
You can mail to [email protected]
Regards,
Paul Kondaveeti
<b>Also see the help extract from customizing:</b>
Set Up Integration with Organizational Management
In this IMG activity, you integrate business partner data with HR master data (organizational model and employees).
Activities
1. Activate global HR integration by setting the main switch HRALX/HRAC to 'X'.
2. Activate the integration between business partners and organizational units by setting the switch HRALX/OBPON to 'ON'.
3. Activate the integration between business partners and employees by setting the switch HRALX/PBPON to 'ON'.
4. Numbers can generally be assigned in three ways when creating business partners:
a) Number is taken as before from the general internal interval for number range object BU_PARTNER.
b) Number is taken from the special internal interval for the object.
c) Number is taken from HR and given a prefix. A special external interval is used, which has to be defined as XX00000000 to XX99999999, where XX stands for any two letters.
Number assignment is set for organizational units using HRALX/ONUMB, and for employees using HRALX/PNUMB.
The number range object for all switch values is BU_PARTNER, the interval being dependent on the switch value. The internal standard interval is used for switch value 1, for switch values 2 and 3 the interval is defined by the switch HRALX/OSUBG or HRALX/PSUBG. For switch values 2 and 3, a grouping also needs be created for these intervals using transaction BUC2.
To enable the system to connect the grouping and the number range interval, the name of the grouping must be exactly the same as that of the corresponding number range interval. The name of the grouping is in the first column of the table.
If you choose number assignment type 3 for business partners with the role employee (switch HRALX/PNUMB = 3), create the switch HRALX/PSUBG manually in table T77S0.
5. If you would like users to be informed by e-mail when errors occur, the recipient can be defined in switch HRALX/MSGRE (0=No messages, 1=Workflow administrator is notified, 2=User receives mail, 3=Both are informed).
6. If addresses are required to generate business partners correctly, the switch HRALX/OADRE must be set to 'X'. The standard address to be assigned to every organizational unit without its own address can be defined using HRALX/OADBP.
To create a standard address, create a business partner with an address and then enter this business partner's number in the switch.
7. If qualifications for employees are also to be transferred, the switch HRALX/PQUAL must be set to 'X'.
Effects on Existing Data
If you have already transferred employees from a connected HR System in an earlier CRM Release and have now upgraded, the relevant employees (personnel numbers) must be transferred again to the CRM System by initial distribution. This enables important employee information to be stored in the target system, and changes to be transferred correctly to the business partner master records.
Message was edited by:
Paul Kondaveeti

Creation of HU in auto mode with external number range

Dear Experts,
         I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..

Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS                 Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER          Change Handling Unit Header Data
BAPI_HU_CREATE                 Create Handling Unit with Items
BAPI_HU_DELETE                 BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY        Displays HU History
BAPI_HU_GETLIST                Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG           Select Handling Unit Output
BAPI_HU_PACK                   BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG            HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT     Select and Process Handling-Unit Outputs
BAPI_HU_REPACK                 Repack HUs and HU Items
BAPI_HU_UNPACK                 BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY                 Display an HU in Dialog Mode
===================================

Customer Master data creation with customized number range

Dear all,
Can somebody know how to create the customized number range for customers like first 2 digits represents Sales organization and next 2 digit should represent circle,next 2 distribution chaneel and last 4 digits shold be the running number.
Looking for solution..
Thanks & Regards,
Murali.

Hi,
In your case you need to define as following
Step No: 01.
01.Sales Orgination with 0001 to 0099.
02.Regions with 00 to 99.
03.Distribustion Channel with 00 to 99
Step No:02.
Define PDP with the diffrent account groups defined for diffrent Sales Org, Regions & DC's.
Step : No: 03.
As per the above configs go to TCode for Number range for accounts groups in XDN1. Say Example as
XX--- From:1010100000 to: 1010109999. Note the possiable numbers are 0000 to 9999 only.
10 is sales Org, 10 is Region & 10 is DC's.
This is one of the way to do. The other way is to develo Z table and to use the user exit / new progarme to identify the requried number range with reference to Sales Org, Regions & DC's
Hope this is fine with your requrment.
Bye & enjoy SAP.
Koganti.

Partner Function in Vendor Master With Internal Number Range

Hello Friends,
I am creating vendor master record with internal no range.I wanted following clarifications.
1.In partner function screen, I want to have same vendor no which i am creating to be assigned automatically to VN.OA PI and GS funtions at the time of its master creation.This is not happening in my case
2.Partner function like VN,OA,PI and GS does not appear automatically whereas i have to select it manually.
Regards
Vivek

Hi,
During defining the partner Schema, please follow the process:
a.Create partner Schema
b.After creation of partner Schema, select your partner Schema and click u201Cpartner roles in schemau201D and you will have next screen
Now for Partner function like VN,OA,PI and GS as you required and select the check box of mandatory
and save.
Now try creating Vendor and you will have Partner function like VN,OA,PI and GS in vendor master.
Note: The following configuration steps for Vendor master are:
1. Create Vendor Account Group.OBD3
2. Maintain Number Ranges from Vendor account Group:XKN1,
3.Assignment of Number ranges to Account Group,OBAS
4.Partner Function: SPRO->MM->Purcahsing->Partner Determination-> partner roles->Permissible partner role sper account group
5.Partner Schema:
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Define partner Schema
6.Assgin partner schema to accont Group
SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Assgin partner schema to account Group
Regards,
Biju K

Adding a specific org unit with a user id.

Hi SAP Master,
How can I add a specific organization Unit with a particular User Id, i.e when ever that user id logs in into system and create a transaction the org. unit assigned with him determined automatically.
And one more query, how can we send a org. unit for approval?
Thanks and Regards
Rahul
Edited by: Rahul07 on Jun 10, 2011 10:18 AM

Hi Rahul,
We don't assign the Organization unit to the user in the SU01. In SU01 we assing the PFCG roles and authorization related stuff.
Rather we create the Organization model, assign positions and then assign the user to the relevant position under the required organization unit using the tcode "PPOMA_CRM".
When you setup the Organization determination procedure, then automatically while creating the transaction, the Organization Unit of the person who is creating the Transaction gets determined.
rgrds,
Randhir

ECC 6.0 :Error with AFAB ( Number Range Assginment)

Dear All,
Please advise
We have upgrading from 4.7 to ECC 6.0
While running DEP AFAB, I get the following Error resulting
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2006 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Here for DEP posting we have maitianed number range as Externally and we are able to run in PRD but now after upgrade in DEV, it is giving the above Error.
regards,
sgs

Hi,
Upto version 4.7, you need to have the number range marked as 'external'.
In ECC 6.0, you need to have the version as 'internal'. You can change the number range from 'external' to 'internal' only when you change the status (current number) to zero. If it is year specific number range, any significant impact may not be there. Nevertheless, please follow the note 890976.
Cheers.
Dhananjai

Org unit with extenal number range

Similar Messages

Maybe you are looking for