Organizing integration projects into SWCV/Namespaces for CMS

Hi,
I have a question regarding how to organize different integration projects into SWCV/namespaces in order to be able to send the different projects into production using CMS independently.
We are using XI for all data from/to our SAP system landscape, and using BizTalk (BZ) for integration scenarios between the different system landscapes in our company.
Basically, we thought we could organize the different integration projects between XI and BZ using just one SWCV where each project has it own namespace;
BIZTALK
  <namespace for project 1>
  <namespace for project 2>
  <namespace for project n>
But when using the CMS for transport, we cannot separate which transport to assemble when they are related to the same SWCV. Thus, 2 different projects with BZ interface and several transports to Consolidation, they will all be assembled even if just one of the projects is supposed to be transported to production.
Can someone verify this?
Seems to me that we must reorganize and create a BZ SWCV for each project?
BIZTALK_PRJ1
  <namespace for project 1>
BIZTALK_PRJ2
  <namespace for project 2>
This will give us a lot of different SWCVs for one system, and the same is valid for all our different SAP systems…
Best regards
Torstein

Thank you again, but I think I have to rephrase my question;
We are using the CMS option for transporting objects between Dev, Qual and Prod.
Introduction; you have a SWCV with 2 different namespaces for 2 different interfaces/projects. It is easy to transport to Consolidation, but all imported transports are automatically placed into the Assembly Queue (transports are assembled into a service pack before approval and import to production).
At the Assembly stage, you can only select transports based on SWCV, you cannot select which transport to use, but all transports related to one SWCV will automatically be assembled.
Thus, if 2 different projects, separated into two namespaces in one SWCV, have transports to Consolidation, all the transports will be assembled.
If using File transports this is not a problem, but the it seems to me that it should be possible to separate which transports to select for assemble based on SWCV AND namespace.
Comments?
Best regards
Torstein Nesby

Similar Messages

  • Breaking up a project into smaller units for YouTube

    Hi,
    I used FCPX and Compressor to export a 55 minute FCPX movie for YouTube. The resulting 720p file, while looking fantastic, was 4.37 gigabytes and failed to upload to YouTube. Rather than compressing to a smaller, lower resolution movie, I think I'd rather break the movie up into four separate movies and upload those smaller files to YouTube. What I am asking is this: What's the easiest way to break up my project into separate movies, using either FCPX or Compressor?
    Thanks!

    rebbi wrote:
    Hi,
    I used FCPX and Compressor to export a 55 minute FCPX movie for YouTube. The resulting 720p file, while looking fantastic, was 4.37 gigabytes and failed to upload to YouTube. Rather than compressing to a smaller, lower resolution movie, I think I'd rather break the movie up into four separate movies and upload those smaller files to YouTube. What I am asking is this: What's the easiest way to break up my project into separate movies, using either FCPX or Compressor?
    Thanks!
    You can set IN and OUT points in the timeline to export just a section of the movie.
    But since you already exported, there is an easier way. Open the exported movie in MPEG Streamclip, set an IN and an OUT point, and do Save As...; repeat with other IN and OUT. This is quick, since it does not recompress the movie.

  • Importing Flex project into Flash CS5 for use with iPhone packager? Please Help.

    Hi all,
    I have been developing an application in Flex builder for the iPhone using the iPhone packager, where I've been using the Flex framework.
    Now I'm stuck at trying to use my existing libraries in Flash. It seems I can't add the UI components I used in Flex (class VideoExample) to the default Flash container. I need someone's help who has experience with that.
    I have created a .SWC file, but when I'm trying to add the container in Flash using addChild(new VideoExample) it doesn't work. I can't load the .SWF externally using loader.load() at runtime, because the application is for iPhone. Any solutions how could I import the project to Flash?
    I was thinking about changing the UI components classes from mx.* to fl.*, but I would have to change many code and I'm not sure if it would even work, and I don't want to loose compatibility with mxml.
    Please respond, help would be very much appreciated!
    Here's my mxml wrapper, from which I start the main application:
    <?xml version="1.0"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="EntryPoint.main()">
    </mx:Application>
    Then I have a class which creates the main container:
    package {
    import mx.core.*;
    public class EntryPoint {
        public static function main():void {
            var client:VideoExample = new VideoExample();
            var mxmlApp:Application = Application(Application.application);
            mxmlApp.addChild(client);
    Here is the main class VideoExample:
    package {
    import mx.controls.*;
    import mx.containers.*;
    public class VideoExample extends Canvas {
        public function VideoExample() {
            super();
            init();
            private function init():void {
            loadImage();
            loadText();
                    loadDisplay();
                    startConnection();

    This forum is for Flash Media Server Developers so most likely you migth get much traction here. I would recommend you to post your query on Flash Builder forum: http://forums.adobe.com/community/flash_builder/using_flash_builder
    Also you can try posting here:
    Flash Platform Services For Promotion - http://forums.adobe.com/community/promotion
    Flash : http://forums.adobe.com/community/flash/flash_general

  • How to import an existing project into DTR

    I have one question for NWDI:
    There are two senarios:
    A. I created a web dynpro project without NWDI. Now I want to import it into DTR. Is there any workaround?
    B. My NWDI crashed and can not be recovered. Then I install a new empty NWDI. Since I checked out all the DCs to my client side. Is there any workaround to re-import the project into the empty NWDI?

    Hi,
    You can transfer local DC project into NWDI. I have a doc which tells the procedure to Convert local CAF DC project into NWDI. For Web Dynpro project the procedure will be same. So you can go through the doc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3e479a6a-0b01-0010-62bd-dcfe09c67c41
    Without NWDI you can also do your development by usind DCs in your local plugin folder. Here is one doc also.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b
    I think it will help you to solve your problem.
    Thanks
    Chandan

  • How to add a Captivate 5 Project into RH for Word?

    I have to add a captivate simulation project into my Help project, and was wondering if anyone knows if it is possible. I searched Captivate's help, and they say you can with RH HTML, but I am currently using:
    1. RH for Word Build 8.0.0.203
    2. Captivate 5.0.0.596
    The Help project is a Single Source Layout with WinHelp 2000 primary layout. Any ideas?
    eangel

    Hi Rick,
    I did test the url from my browser's address bar, and it worked fine. I cannot get this to work from the help project.
    Hope someone can help.
    Thanks,
    eangel

  • How can I keep the edited video which in project into Libray for re-edit ?

    How can I keep the edited video which in project into Libray for re-edit later ??
    As i used i movie 06 before....
    after i imported the videos in to the library, then i can drag the videos to the timeline(now is project)
    then edit it.
    After that i can just drag all the timeline clips which is edited to the library.So I can keep it for next time if i wanna re-edit.
    But Now if did all the editing at the library clips then drag to project, i can not drag the project clips back to library, so how can i keep it for my editing safty?
    I do not wanna to edit again the same clips from the library!!! as i need to edit many different short clips together then export to individual videos, and i may need to re-edit.
    or i can keep the edited video in project, then i can selected the clips which i willing to export, the rest video who in the project will not be export at the same video? I m wondering....
    please help!!! Urgent!!

    Just keep the project. Then you can just duplicate the project and make the next set of changes as needed. By duplicating the project, you are not duplicating the event, just the links to the event library.
    This way you are not eating up disk space.
    Does that help?

  • Which CAPS 6 Project Type is best for integration purposes?

    Which CAPS 6 Project Type is best for integration purposes?
    CAPS 6 is the company standard for integrating applications so I'm looking to get started converting XML from one format to another.
    Which project type is best to use for this scenario?
    Thanks in advance.

    As John suggested you should properly post this question in an Visual Studio forum:
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=visualstudiogeneral&filter=alltypes&sort=lastpostdesc
    Visual C++, C#, VB.Net are all running on the DOT.NET enviroment and are different languages that have no difference in functionality.
    C and C++ does not run on the DOT.NET platform, but directly on the CPU.
    C# does also deals with processes and threads, and you can load DLL's at runtime/compile time if you want.
    C# also have console applications.
    http://technicaltrix.blogspot.dk/

  • Turn idvd project into movie for youtube

    How do you turn idvd project into movie for youtube

    if what you are seeking is simply adding the dvd presentation as a QT movie (no buttons or menus from iDvd) then look into DVDXDV > iMovie or iDVD.
    http://www.dvdxdv.com/
    Message was edited by: SDMacuser

  • Importing RoboHelp7 for Word project into RoboHelpHTML - error

    I am trying to import my RoboHelp7 for Word project into RoboHelp7 HTML so that I can include Captivate App Demos in my help project. (As I don't seem to be able to find out how to do that in RH7forWord.)
    I make a copy of my project directory from RH7forWord. I then open RH7HTML and choose to open the hpj project file in the copy directory. It works for a bit and then reports "This project is from a newer version of the program. This project is no longer compatible with this version. Please make sure you have the newest version installed."
    I have rebooted, ran all updates to all Adobe products and rebooted again. It still reports the same error.
    What can I do to start using RoboHelpHTML on my RH7forWord project?
    Thanks,
    Jeff

    Ok - I have to admit complete brain fart idiocy here. I thought I was using RoboHelpHTML v7 and I was opening v6. Both of which I have on my system, and the desktop icon for the latter I have mis-named.
    Very sorry for the wasted bandwidth and thank you for taking the time to respond Peter.
    I will start a new topic on going from RoboHelp for Word 8 to RoboHelp HTML 8 in a moment that I hope you will take the time to offer advice on.
    Thanks and apologies. I know it is ridiculous to make such a mistake.
    Jeff

  • Import AppBuilder project into Eclipse for Android

    Hello,
      I am trying to take an application developed in AppBuilder and load it into Eclipse.  How is this done?  I cannot find any resources explaining how to do this.  The goal is to deploy an application to an android tablet.  I have the development environment setup including Cordova and Kapsel plugins.  How does one load appbuilder files into Eclipse?

    Hi,
    I am trying same to import my appbuilder project into eclipse. I have created cordova project and then published to project directory from appbuilder. Then I opened the eclipse IDE and followed the steps File>New>Project>Android>Android Project from Existing Code> browse project directory. but it looks eclipse cannot recognise the project! I can see all the files I have project.jason and a www directory but there is no .project or project.properties! am I  misisimg anything in appbuilder or ineclipse?
    Regards
    Mohammad Sarker

  • Job Posting for CMS Business Lead

    Please contact [email protected] for more information or to apply. Full posting is below.
    Job Title: Online Business Application Manager
    Location: Reston, VA, London, UK, or Olso, Norway
    Contact Email: [email protected]
    TANDBERG is a leading global provider of telepresence, high-definition videoconferencing and mobile video products and services with dual headquarters in New York and Norway. TANDBERG designs, develops and markets systems and software for video, voice and data. The company provides sales, support and value-added services in more than 90 countries worldwide. TANDBERG is publicly traded on the Oslo Stock Exchange under the ticker TAA.OL. Please visit www.tandberg.com for more information.
    Job Summary
    • The role is part of the online marketing team, reporting to the Director of Online Marketing, with a dotted line responsibility to the Global Channels Director.
    • Responsible for the strategic planning, design, implementation, and ongoing development of TANDBERG's global content management system (CMS) and the websites and portals it supports.
    • From a project management perspective, work with TANDBERG’s online and global channels team, internal IT department and external vendors to keep ongoing CMS development on track, within budget, and adhering to best practices for governance, scalability and usability.
    • Work with multiple departments globally, including IT, marketing, services, operations, support, logistics, training, and channel sales to integrate business requirements of all stakeholders into CMS development.
    Essential Duties & Key Responsibilities
    • Facilitate requirements definition, define development plan priorities and phases, and identify timeline and key roles and responsibilities for CMS and partner portal, in collaboration with multiple business owners.
    • Identify and secure implementation resources and appropriate vendors required for ongoing CMS development and integration of CMS with existing and new business applications
    • Organize project team meetings, guide and report on progress of internal and 3rd party teams
    • Build templates, train superusers and set best practices for monthly landing pages on TANDBERG’s partner portal with global channels content and promotions. Ensure global partners have personalized content pages for all portal users. Support global partners with portal usage and account management.
    • Proactively make recommendations for improvements in functionality and design, based on analysis and reporting of usage and adoption of the CMS and its portals.
    • Identify and accelerate areas of concern to business owners.
    Knowledge (The knowledge level is used as an approximation of years only and does not rule out individuals with more or less experience/knowledge. )
    ~10 years
    Skills & Abilities
    • Strong project management skills, including cross-departmental and cross-cultural experience.
    • Ability to rapidly understand business functions and the technology applications that support them.
    • Knowledge and interest in web marketing techniques, such as search engine optimization, template-building, web analytics/reporting.
    • Solid analytical and problem solving skills.
    • Excellent communication skills.
    • Strong relationship skills and the ability to work in a team environment.
    • Flexible and ability to multi-task in a fast-paced environment.
    • Training abilities.
    • Vendor management
    • Customer focused.
    • Understanding of B2B ecommerce a plus.
    • Marketing experience a plus.
    Computer Abilities
    • Experience with Web-based content management systems
    • Experience with Project Management software
    • Expert with Microsoft Office Suite
    Education & Certifications (list any certifications, licenses, or accreditation required):
    BA/BS degree in marketing, business or information technology
    MS degree desired
    Training with Content Management Systems as plus
    Working Conditions Normal Office Environment
    Physical Demands
    (list any specific demands):
    Physical Activities: N/A
    Lifting Requirements: N/A
    Vision Requirements: N/A
    TANDBERG is an equal opportunity/affirmative action employer (M/F/V/D). We support diversity in our workforce. Please note those individuals submitting resumes online or by mailing a resume are not considered an applicant for employment until a signed employment application form is completed, usually at the time of interview
    TANDBERG reserves the right at its sole discretion to change, modify, suspend, or terminate any of the guidelines, elements, or the design of this job description at any time.

    Did you check the profile option - IRC: Internal Posting Days
    From the Implementation guide - http://docs.oracle.com/cd/E18727_01/doc.121/e13518/T24319T440324.htm
    Set posting days to define the number of days for internal job postings
    If you want to make the job details available to your employees first, then set the IRC: Internal Posting Days profile option. You specify the number of days that the application posts an advertisement internally before posting the advertisement on the external site.
    Cheers,
    Vignesh

  • Changing default target namespace for a JPD

    Hi,
    Is there a way in Workshop 8.1 to change the target namespace used when a WSDL
    is generated from a JPD? Currently, Workshop uses http://www.openuri.org. I
    have tried to use the @common:target-namespace annotation in my JPD, but that
    appears to only be valid for JWS files. Is there a way to globally set the default
    target namespace for an entire Workshop project?
    Thanks,
    Nick

    And to just make it more clear :
    and here is the SAP help on the subject:
    Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport layer.
    The transport layer determines whether objects are assigned to a local or transportable change request.
    Use
    Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System and transport layer.
    When you create a package, it is assigned the standard transport layer of the SAP System.
    If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
    The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
    If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
    If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
    It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
    The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
    Best regards,
    Menelaos

  • Accouting Integration - status does not appear for selection...

    We are on PPM5.0. We intend to replicate cProjects into PS.
    We have carried out Accouting Integration, with all the required settings/configs.
    The Project Type is marked for "Accouting Integration" (with "Flag for Transfer" as the trigger for PS project creation), yet we do not see "Flag for Transfer" in the status drop down at cProjects front end.
    Neither after "Create", nor after "Release" does this status appear in the drop down.
    Where could we be going wrong?
    Please advise.

    The object link for accouting integration was not maintained. Issue resolved.

  • Error while Exporting project into MS Project

    Hi,
    Need your suggestion for one issue. While i am trying to export project into MS Project getting following error:
    Internal activeX error:[ 0x80020005] (null)
    Please suggest to fix the issue.
    Regards,
    Ranjan

    Hi Biplap,
    Please goto note 983597.
    Import and Export functionality from SAP cProjects 4.0 to Microsoft Project Server .
    Prerequisite is
           -  Only to Microsoft Project Server 2003.
    958210-- microsoft project client integration
    983597--ms project server 2003 with c project
    thnaks
    sunil

  • How to import maven projects into jDeveloper 11.1.1.5.0

    I have a few maven projects that I would like to work on in jDeveloper (11.1.1.5.0). How do I go about converting them into it?
    First I created a generic project and tried to import my maven projects into it but when I did the import, jDeveloper didn't give the maven proejct option.
    The article in the following link doesn't work for 11.1.1.5.0.
    http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#5
    Could anyone please help?
    Thanks.
    C

    You will have to download the maven integration extensions. Set the correct proxy from Tools->Preferences->Web Browser & Proxy and then Visit Help->Check for updates. You will find two maven extensions to download.

Maybe you are looking for