OS 10.9.1 update not completed?

Hi,
I'm using iMac with two users (separate accounts) running OS10.9 now.
Keep getting "OS X update 10.9.1 is available" through App Store, but I've run the update 8 times so far and when I look at 'Updates Installed in the Last 30Days', it is installed each time.
But when I check the OS version, it's still 10.9 and still getting "OS X update 10.9.1 is available" on App Store no matter how many time I run the update / restart my Mac.
What is wrong? How to resolve?
Please advise.
Thank you.

Download the updater from the Apple Support site and apply it.

Similar Messages

Software updates not completing

Hi
I have tried for the last couple of months now to update software via Software update. it never completes the update, always says that the image could not be created or something in those lines.
Some of the programs like iTunes have updated themselves but the global stuff and MacOS doesn't do that.
have tried third party download of OS but the server times out apparently.
Help! I am 2 gig in updates behind and If i waste another 2 gig in cap and again and again and the software still doesn't install I am going to...... I don't know yet.

Hiya,
I get this occasionally and I quit (or force quit) software update and do it again. On a couple of occasions, it was firewall related (as comms failed with receiving / sending info). If you are missing updates you could do a workaround:
Open system prefs/software update and click the tab "installed updates"
http://i530.photobucket.com/albums/dd348/hornybloke/applesoftwareupdate.jpg
you could go to http://www.apple.com/support/downloads/
and compare if you are missing anything.
(the installed updates vary from system to system depending on the Apple software installed.

1.9 Update Not Completed As Promissed

Tech Services told me the 1.9 updated was going to be completed on 8-10 in area and as of today nothing has happend. I purchased the DVR Extender Drive based on this information and it can not be used till 1.9 is completed. Honestly the updates that are in 1.9 is how the service was sold to me and I had the same options with my previous vendor and this is a reason to cancel services.

They shouldn't have told you, although it is true it was expected to be rolled out to California and Texas then. But Verizon ended up stopping almost all new activity when the strike hit them that week.

ADF Faces - Table update not completely rendered

Hi,
[ myfaces 1.1.3 + ADF version 10.1.3.0.4 ]
I have a problem with Table component, changing a value of the inputText components will not update the output component also inside the table. At least not rendered to HTML, the view-tree contains the updated values. Below I have added a part of the jsp-code + a part of the view-tree of the log.
Changing the value of the inputText with id="salesInput" should trigger an update to the otherSales value in the footer facet in the same column, but it isn't (in the browser).
So I added multiple outputText components on different places in the table to find out if they were updated. I have also added an inputText component with id="test" outside of the table component, this one is properly updating all the otherSales values.
If I change the values on the inputText component with id="salesInput" only the outputText with "salesOutput2" is updated in the browser, the one in the footer facet still contains the previous value. (only a browser refresh is fetching the correct values).
What's the problem why it's not rendered to HTML, tree-view contains right values. Can I force the rendering ?
Did I miss properties, attributes ?
Any ideas...
Your Help is really appreciated.
Thanks,
Bas van Oudenaarde
part of the jsp:
<af:table id="data" value="#{myManagedBean.allGeographicalData}"
var="row" partialTriggers="salesInput test" varStatus="myTable">
<af:column id="salesColumn" sortProperty="sales" sortable="true" width="30%">
<f:facet name="header">
<af:outputText value="#{msg._column_3_Header}"/>
</f:facet>
<af:inputText id="salesInput" immediate="true" value="#{row.sales}" columns="8" autoSubmit="true"                     valueChangeListener="#{myManagedBean.updateOtherSales}" />
<af:outputText id="salesOutput2" partialTriggers="salesInput" value="#{myManagedBean.otherSales}" />
<f:facet name="footer">
<af:outputText id="salesOutput" partialTriggers="salesInput" value="#{myManagedBean.otherSales}"/>
</f:facet>
</af:column>
<af:table>
<af:inputText id="test" value="#{myManagedBean.bla}" immediate="true" columns="8" autoSubmit="true"                     valueChangeListener="#{myManagedBean.updateOtherSales}" />
<af:outputText id="outsideTheTable" partialTriggers="salesInput" value="#{myManagedBean.otherSales}"/>
Log output, changing the value of inputText component within the table component. Here you can see that all values are updated to 92 in the view-tree!!! On the screen however it still shows the previous value in the outputText components expect for the outputText with id=salesOutput2 :
<UIViewRoot id="NULL" FORMER_CHILD_IDS="[_idJsp0]" family="javax.faces.ViewRoot" locale="en" renderKitId="oracle.adf.core" rendered="true" rendererType="NULL" rendersChildren="false" transient="false" viewId="/pages/panel.jsp">
<oracle.adf.view.faces.component.core.data.CoreColumn id="salesColumn" FORMER_CHILD_IDS="[salesInput, salesOutput2]" partialTriggers="[Ljava.lang.String;@67e9f0f6" width="30%" FORMER_FACET_NAMES="[footer, header]" sortProperty="sales" sortable="true" rendererType="oracle.adf.Column" attributeChangeListener="NULL" attributeChangeListeners="NULL" bandingShade="NULL" facesBean="NULL" facetCount="NULL" facetNames="NULL" family="NULL" footer="NULL" formatType="text" gridVisible="true" header="NULL" headerNoWrap="false" headerText="NULL" inlineStyle="NULL" noWrap="false" onclick="NULL" ondblclick="NULL" onkeydown="NULL" onkeypress="NULL" onkeyup="NULL" onmousedown="NULL" onmousemove="NULL" onmouseout="NULL" onmouseover="NULL" onmouseup="NULL" partialTriggers="[Ljava.lang.String;@67e9f0f6" rendered="true" rendererType="oracle.adf.Column" rendersChildren="NULL" rowHeader="false" separateRows="false" shortDesc="NULL" sortProperty="sales" sortable="true" styleClass="NULL" transient="NULL" width="30%">
          <oracle.adf.view.faces.component.core.output.CoreOutputText id="salesOutput2" value="92" partialTriggers="[Ljava.lang.String;@600d70f6" rendererType="oracle.adf.Text" attributeChangeListener="NULL" attributeChangeListeners="NULL" converter="NULL" description="NULL" escape="true" facesBean="NULL" facetCount="NULL" facetNames="NULL" family="NULL" inlineStyle="NULL" localValue="NULL" onclick="NULL" ondblclick="NULL" onkeydown="NULL" onkeypress="NULL" onkeyup="NULL" onmousedown="NULL" onmousemove="NULL" onmouseout="NULL" onmouseover="NULL" onmouseup="NULL" partialTriggers="[Ljava.lang.String;@600d70f6" rendered="true" rendererType="oracle.adf.Text" rendersChildren="NULL" shortDesc="NULL" styleClass="NULL" transient="NULL" truncateAt="0" value="#{myManagedBean.otherSales}"/>
<oracle.adf.view.faces.component.core.output.CoreOutputText id="salesOutput" facetName="footer" value="92" partialTriggers="[Ljava.lang.String;@679eb0f6" rendererType="oracle.adf.Text" attributeChangeListener="NULL" attributeChangeListeners="NULL" converter="NULL" description="NULL" escape="true" facesBean="NULL" facetCount="NULL" facetNames="NULL" family="NULL" inlineStyle="NULL" localValue="NULL" onclick="NULL" ondblclick="NULL" onkeydown="NULL" onkeypress="NULL" onkeyup="NULL" onmousedown="NULL" onmousemove="NULL" onmouseout="NULL" onmouseover="NULL" onmouseup="NULL" partialTriggers="[Ljava.lang.String;@679eb0f6" rendered="true" rendererType="oracle.adf.Text" rendersChildren="NULL" shortDesc="NULL" styleClass="NULL" transient="NULL" truncateAt="0" value="#{myManagedBean.otherSales}"/>
</oracle.adf.view.faces.component.core.data.CoreColumn>
<oracle.adf.view.faces.component.core.output.CoreOutputText id="outsideTheTable" value="92" partialTriggers="[Ljava.lang.String;@73e070f6" rendererType="oracle.adf.Text" attributeChangeListener="NULL" attributeChangeListeners="NULL" converter="NULL" description="NULL" escape="true" facesBean="NULL" facetCount="NULL" facetNames="NULL" family="NULL" inlineStyle="NULL" localValue="NULL" onclick="NULL" ondblclick="NULL" onkeydown="NULL" onkeypress="NULL" onkeyup="NULL" onmousedown="NULL" onmousemove="NULL" onmouseout="NULL" onmouseover="NULL" onmouseup="NULL" partialTriggers="[Ljava.lang.String;@73e070f6" rendered="true" rendererType="oracle.adf.Text" rendersChildren="NULL" shortDesc="NULL" styleClass="NULL" transient="NULL" truncateAt="0" value="#{myManagedBean.otherSales}"/>
</oracle.adf.view.faces.component.html.HtmlCellFormat>
</oracle.adf.view.faces.component.html.HtmlRowLayout>
</oracle.adf.view.faces.component.html.HtmlTableLayout>
</oracle.adf.view.faces.component.core.CoreForm>
</oracle.adf.view.faces.component.core.CoreDocument>
</UIViewRoot>

In EA14, the return from the dialog required a full-page refresh (whether the dialog was launched with PPR or not didn't matter). In EA15, it's done with PPR if possible. This avoids the flash (and re-scrolling, etc.), but means you do need to tell us what's going to get changed because of the return. You can use partialTriggers on the table with the "id" of the button to make this happen.

I SYNC MY IPHONE 4S WITH ITUNES..THE SOFTWARE UPDATE NOT COMPLETED DUE TO UNKNOWN ERROR. NOW MY PHONE IS NOT STARTING...WILL I LOSE ALL DATA?

BEFORE THE SOFTWARE UPDATE, THE IPHONE WAS BACKING UP..WHERE IS ALL THE DATA

PLS SOMEBODY HELP...HAVE LOTS OF IMPORTANT DATA WHICH I DO NOT WANT TO LOSE

Updates not completing after downloading

Hi All
After d/l software updates the computer starts to the reboot process but stops at the window saying " checking configuration". It then freezes at this point and will not respond (left over night thinking it was a slow process, but to no avail). I am pretty new to Macs so I need help please.
Thanks

See Mac OS X 10.5: Software Update stops responding during "Configuring installation"

Download of update not completed

When I downloaded the latest upgrade, I was told to reboot, which I did. Since then every time I try to access the net I get a message saying my computer must be restarted to complete a previous upgrade.Do you want to reboot now? This goes on a loop, so I tried uninstalling Firefox, only to get message as above. What do I do?

I would make sure you've fully shut down Windows and Started it back up (not put it to sleep, or hibernate). Then, if that doesn't work, do a System Restore.

10.8.3 update not completed and requests restart but restart does not complete the installation.

After runnng the 10.8.3 update on my newest IMac, a restart is requested. No matter how many times a restart is accomplished, the update remains flagged in the app store. About this Mac reports 10.8.2. The update was permormed on my other I-Mac and MBP without issue. Any suggestions on how to remedy this update issue?

Boot into Recovery and Repair the Disk and Repair permissions using Disk Utility. http://support.apple.com/kb/ht4718
Then, reboot and try the update again.
You also might try the Combo update: http://support.apple.com/kb/DL1640

Nokia n96 software update not complete, and now my...

after trying to update my nokia n96 firmware , via nokia suite, my phone goes idiot and when i power on my phone , it slow down so much,and screen freezes ! i've tested it, if i flip my phone and take it away to go to stand by screen, then flip on screen, now i see everything is right ,but if going to menu, it freezes and should to wait to display off and again press any key to display goes on and show me menu! and any work in my phone that change the screen,done with off/on screen to shows ! what happen to my phone ?!

First, Try re-installing the Firmware thru' Nokia Suite.
Else, Back-up all your data thru' Nokia Suite and Soft Reset the phone by dialing *#7370# followed by 12345 (default code unless changed by you..) when prompted. After the reset re-install the Firmware if necessary..
Be warned that this Reset will erase all dta from the Phone memory.You need to restore the data and MAY have to re-install a few applications.

Problem with me flash bios not completed.

it gives me the message bios update not completed. please insert usb flash drive and reset system even though there is a inserted before disconnecting everything i managed to file not found therefore downloaded evib.binb but that didn't work
i am on the H61M-P25 (B3) motherboard i was wondering if any one could help me thanks.

yes it was the s3
should i just reformat and then only copy the files to the in the attached rar or should have other files say the original exe

HT201210 I tried to update my Iphone 4S & was sent an error message telling me to restore my phone & did so & now my phone is unable to be used because it will not complete the restoring process & is locked in this screen not letting me use it at all.

I was trying to update my software to on my phone and it would not let me do so sending me a message to restore my phone before I can complete an update so I did this but it would not complete the restore and was sent another message stating that my phone is already in recovery mode and a restore needs to be completed before I can update any software. I have tried this four times now and my phone screen is stuck with the Itunes symbol on it along with a picture of the plug. It will not let me eject or do absolutely anything. I cannot use my phone at all. I have even tried to shut it down and turn it back on which still did not help.

and error code or the exact msg would help

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

On your iPad tap Settings > Store
Switch Books off then back on then reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

OS 10.9.1 update not completed?

Similar Messages

Maybe you are looking for