OS for oracle 11R2

Hi,
I would like to install oracle 11r2 on Linux in vmware in windows xp 32(service pack 2).
which Linux version is suitable for oracle 11R2.
I tried red hat 5.1 but some of the rpm packages is missing.
and registered oracle enterprise Linux.but export validation is delayed for download.
It is urgent where can i get the oracle enterprise linux 5.4.?
or
some other supported version for oracle enterprise linux 5.4?

user3266490 wrote:
Hi,
I would like to install oracle 11r2 on Linux in vmware in windows xp 32(service pack 2).
which Linux version is suitable for oracle 11R2.
I tried red hat 5.1 but some of the rpm packages is missing.
Did you try looking for them and installing them?
and registered oracle enterprise Linux.but export validation is delayed for download.Even OEL wil have some packages missing when you first shake it out of the box.
>
It is urgent where can i get the oracle enterprise linux 5.4.?
No, it is not urgent. Urgent is when (1) people are dying or (2) you have a revenue generating production system that is down. And in light of (1), I often have doubts about the urgency of (2).
or
some other supported version for oracle enterprise linux 5.4?

Similar Messages

  • Rpm for oracle 11r2

    Hi,
    I tried to install oracle 11r2 in red hat.
    followings are missed
    gcc-4.1.2
    libgomp-4.1.2
    glibc-2.5-24
    gcc-c++-4.12 @
    libaio-devel-0.3.106
    libcc-4.1.2 @
    libstdc++-4.1.2
    libstdc++-devel-4.1.2
    sysstat-7.0.2
    unixodbc-2.2.11
    unixodbc-devel-2.2.11
    some of the rpms asked dependencies.why these files are missed? where to get these file.
    [root@perf Downloads]# rpm -ivh gcc-4.1.2-1.i386.rpm
    error: Failed dependencies:
    libintl.so.8 is needed by gcc-4.1.2-1.i386
    linux-gate.so.1 is needed by gcc-4.1.2-1.i386
    [root@perf Downloads]# rpm -ivh libstdc++-devel-4.1.2-33.i386.rpm
    warning: libstdc++-devel-4.1.2-33.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
    error: Failed dependencies:
    libstdc++ = 4.1.2-33 is needed by libstdc++-devel-4.1.2-33.i386
    [root@perf Downloads]# rpm -ivh sysstat-7.0.2-3.src.rpm
    1:sysstat warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    ########################################### [100%]
    warning: user mockbuild does not exist - using root
    warning: group mockbuild does not exist - using root
    [root@perf Downloads]# rpm -ivh  unixODBC-2.2.11-7.1.src.rpm
    warning: unixODBC-2.2.11-7.1.src.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
    1:unixODBC warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    warning: user brewbuilder does not exist - using root
    warning: group brewbuilder does not exist - using root
    ########################################### [100%]
    error: unpacking of archive failed on file /usr/src/redhat/SOURCES/unixODBC-2.2.11.tar.gz;4bb348ea: cpio: read
    [root@perf Downloads]# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
    warning: unixODBC-devel-2.2.11-7.1.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
    error: Failed dependencies:
    libboundparam.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libesoobS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libgtrtst.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libmimerS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libnn.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbccr.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbcdrvcfg1S.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbcdrvcfg2S.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbcinst.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbcminiS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbcnnS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libodbctxtS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    liboplodbcS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    liboraodbcS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libsapdbS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libtdsS.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    libtemplate.so.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    unixODBC = 2.2.11-7.1 is needed by unixODBC-devel-2.2.11-7.1.i386
    please anyone helpme out that

    For Red hat, you need to have a paid license for Redhat network. "Other than that, the option would be search over web like www.rpmfind.net. I would recommend you that you start using Enterprise Linux which has a Public YUM available for free which can be used to find the rpms needed without looking in the media all the time.
    HTH
    Aman....

  • Data Modeler 3 (EA1): Connection issue when connecting to oracle 11R2

    Hi all,
    When I try to create a connection object for a oracle 11r2 database I get the following error:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-22285: non-existent directory or file for FILEEXISTS operation
    ORA-06512: at "SYS.DBMS_LOB", line 725
    ORA-06512: at line 5
    when I test the connection.
    I have checked the oracle 11r2 instance and have 3 directory objects and all are correct;
    SYS ORACLE_OCM_CONFIG_DIR /opt/oracle/app/oracle/product/11.2.0.1/ccr/state
    SYS DATA_PUMP_DIR /opt/oracle/app/oracle/product/11.2.0.1/rdbms/log/
    SYS XMLDIR /opt/oracle/app/oracle/product/11.2.0.1/rdbms/xml
    What can cause this problem. I have the same issue with the older version of the data modeler
    Thanks

    Hey if you want me too I can create a tar/sr.
    It happens even when I log in as sysdba. The three directory objects on the file system are all owned by oracle and oracle can rwx into those.
    My user can see XMLDIR but does not have read/write on the directory object all other it does have read write.
    Thanks.
    datamodeler.log:
    2010-10-19 11:54:14,947 [main] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 2.1
    2010-10-19 12:01:32,288 [AWT-EventQueue-0] ERROR AbstractDBMExtractionWizardImpl - java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
    ORA-22285: non-existent directory or file for FILEEXISTS operation
    ORA-06512: at "SYS.DBMS_LOB", line 725
    ORA-06512: at line 5
    Environment:
    About
    Oracle SQL Developer Data Modeler 3.0.0
    Version 3.0.0
    Build 649
    Copyright © 2008,2010 Oracle. All Rights Reserved.
    IDE Version: 11.1.1.4.37.58.38
    Product ID: oracle.datamodeler
    Product Version: 3.0.0.649
    Version
    Component     Version
    =========     =======
    Java(TM) Platform     1.6.0_21
    Oracle IDE     3.0.0
    Versioning Support     3.0.0
    Properties
    Name     Value
    ====     =====
    awt.toolkit     sun.awt.windows.WToolkit
    class.load.environment     oracle.ide.boot.IdeClassLoadEnvironment
    class.load.log.level     CONFIG
    class.transfer     delegate
    file.encoding     Cp1252
    file.encoding.pkg     sun.io
    file.separator     \
    ice.browser.forcegc     false
    ice.pilots.html4.ignoreNonGenericFonts     true
    ice.pilots.html4.tileOptThreshold     0
    ide.bootstrap.start     3457609345725564
    ide.build     649
    ide.conf     D:\app\oracle\datamodeler\3.0.0\datamodeler\bin\datamodeler.conf
    ide.config_pathname     D:\app\oracle\datamodeler\3.0.0\datamodeler\bin\datamodeler.conf
    ide.debugbuild     false
    ide.devbuild     false
    ide.extension.search.path     datamodeler/extensions:jdev/extensions
    ide.firstrun     true
    ide.java.minversion     1.6.0_04
    ide.launcherProcessId     4160
    ide.main.class     oracle.ide.boot.IdeLauncher
    ide.patches.dir     ide/lib/patches
    ide.pref.dir     D:\Documents and Settings\StreekRG\Application Data\Oracle SQL Developer Data Modeler
    ide.pref.dir.base     D:\Documents and Settings\StreekRG\Application Data
    ide.product     oracle.datamodeler
    ide.shell.enableFileTypeAssociation     D:\app\oracle\datamodeler\3.0.0\datamodeler.exe
    ide.splash.screen     splash.png
    ide.startingArg0     D:\app\oracle\datamodeler\3.0.0\datamodeler.exe
    ide.startingcwd     D:\app\oracle\datamodeler\3.0.0
    ide.user.dir     D:\Documents and Settings\StreekRG\Application Data\Oracle SQL Developer Data Modeler
    ide.user.dir.var     IDE_USER_DIR
    ide.vcs.noapplications     true
    ide.work.dir     D:\Documents and Settings\StreekRG\My Documents\Oracle SQL Developer Data Modeler
    ide.work.dir.base     D:\Documents and Settings\StreekRG\My Documents
    java.awt.graphicsenv     sun.awt.Win32GraphicsEnvironment
    java.awt.printerjob     sun.awt.windows.WPrinterJob
    java.class.path     ..\..\ide\lib\ide-boot.jar
    java.class.version     50.0
    java.endorsed.dirs     D:\java\jdk1.6.0_21\jre\lib\endorsed
    java.ext.dirs     D:\java\jdk1.6.0_21\jre\lib\ext;C:\WINDOWS\Sun\Java\lib\ext
    java.home     D:\java\jdk1.6.0_21\jre
    java.io.tmpdir     D:\DOCUME~1\StreekRG\LOCALS~1\Temp\
    java.library.path     D:\app\oracle\datamodeler\3.0.0;.;C:\WINDOWS\Sun\Java\bin;C:\WINDOWS\system32;C:\WINDOWS;D:\app\oracle\product\11.1.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\WBEM;%C:\WINDOWS%\system32;%C:\WINDOWS%;%C:\WINDOWS%\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\Rational\common;C:\Program Files\Rational\ClearCase\bin;C:\Program Files\QuickTime\QTSystem\
    java.naming.factory.initial     oracle.javatools.jndi.LocalInitialContextFactory
    java.runtime.name     Java(TM) SE Runtime Environment
    java.runtime.version     1.6.0_21-b07
    java.specification.name     Java Platform API Specification
    java.specification.vendor     Sun Microsystems Inc.
    java.specification.version     1.6
    java.vendor     Sun Microsystems Inc.
    java.vendor.url     http://java.sun.com/
    java.vendor.url.bug     http://java.sun.com/cgi-bin/bugreport.cgi
    java.version     1.6.0_21
    java.vm.info     mixed mode
    java.vm.name     Java HotSpot(TM) Client VM
    java.vm.specification.name     Java Virtual Machine Specification
    java.vm.specification.vendor     Sun Microsystems Inc.
    java.vm.specification.version     1.0
    java.vm.vendor     Sun Microsystems Inc.
    java.vm.version     17.0-b17
    jdbc.driver.home     /D:/app/oracle/product/11.1.0/db_1/
    jdbc.library     /D:/app/oracle/product/11.1.0/db_1/jdbc/lib/ojdbc5.jar
    line.separator     \r\n
    oracle.home     D:\app\oracle\datamodeler\3.0.0
    oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG     true
    oracle.net.tns_admin     D:\app\oracle\datamodeler\3.0.0\network\admin
    oracle.translated.locales     de,es,fr,it,ja,ko,pt_BR,zh_CN,zh_TW
    oracle.xdkjava.compatibility.version     9.0.4
    orai18n.library     /D:/app/oracle/product/11.1.0/db_1/jlib/orai18n.jar
    os.arch     x86
    os.name     Windows XP
    os.version     5.1
    path.separator     ;
    reserved_filenames     con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout,conout$
    sun.arch.data.model     32
    sun.boot.class.path     D:\java\jdk1.6.0_21\jre\lib\resources.jar;D:\java\jdk1.6.0_21\jre\lib\rt.jar;D:\java\jdk1.6.0_21\jre\lib\sunrsasign.jar;D:\java\jdk1.6.0_21\jre\lib\jsse.jar;D:\java\jdk1.6.0_21\jre\lib\jce.jar;D:\java\jdk1.6.0_21\jre\lib\charsets.jar;D:\java\jdk1.6.0_21\jre\classes
    sun.boot.library.path     D:\java\jdk1.6.0_21\jre\bin
    sun.cpu.endian     little
    sun.cpu.isalist     pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86
    sun.desktop     windows
    sun.io.unicode.encoding     UnicodeLittle
    sun.java2d.ddoffscreen     false
    sun.jnu.encoding     Cp1252
    sun.management.compiler     HotSpot Client Compiler
    sun.os.patch.level     Service Pack 3
    svnkit.sax.useDefault     true
    user.country     US
    user.dir     D:\app\oracle\datamodeler\3.0.0\datamodeler\bin
    user.home     D:\Documents and Settings\StreekRG
    user.language     en
    user.name     streekrg
    user.timezone     America/New_York
    user.variant     
    windows.shell.font.languages     
    Extensions
    Name     Identifier     Version     Status
    ====     ==========     =======     ======
    Code Editor     oracle.ide.ceditor     11.1.1.4.37.58.38     Loaded
    Database UI     oracle.ide.db     11.1.1.4.37.58.38     Loaded
    Diff/Merge     oracle.ide.diffmerge     11.1.1.4.37.58.38     Loaded
    Extended IDE Platform     oracle.javacore     11.1.1.4.37.58.38     Loaded
    Help System     oracle.ide.help     11.1.1.4.37.58.38     Loaded
    History Support     oracle.jdeveloper.history     11.1.1.4.37.58.38     Loaded
    Import/Export Support     oracle.ide.importexport     11.1.1.4.37.58.38     Loaded
    Index Migrator support     oracle.ideimpl.indexing-migrator     11.1.1.4.37.58.38     Loaded
    Log Window     oracle.ide.log     11.1.1.4.37.58.38     Loaded
    Mac OS X Adapter     oracle.ideimpl.apple     11.1.1.4.37.58.38     Loaded
    Navigator     oracle.ide.navigator     11.1.1.4.37.58.38     Loaded
    Object Gallery     oracle.ide.gallery     11.1.1.4.37.58.38     Loaded
    Oracle IDE     oracle.ide     11.1.1.4.37.58.38     Loaded
    Oracle SQL Developer Data Modeler     oracle.datamodeler     3.0.0.649     Loaded
    Peek     oracle.ide.peek     11.1.1.4.37.58.38     Loaded
    Persistent Storage     oracle.ide.persistence     11.1.1.4.37.58.38     Loaded
    Property Inspector     oracle.ide.inspector     11.1.1.4.37.58.38     Loaded
    QuickDiff     oracle.ide.quickdiff     11.1.1.4.37.58.38     Loaded
    Replace With     oracle.ide.replace     11.1.1.4.37.58.38     Loaded
    Runner     oracle.ide.runner     11.1.1.4.37.58.38     Loaded
    VHV     oracle.ide.vhv     11.1.1.4.37.58.38     Loaded
    Versioning Support     oracle.jdeveloper.vcs     11.1.1.4.37.58.38     Loaded
    Versioning Support for Subversion     oracle.jdeveloper.subversion     11.1.1.4.37.58.38     Loaded
    Virtual File System     oracle.ide.vfs     11.1.1.4.37.58.38     Loaded
    Web Browser and Proxy     oracle.ide.webbrowser     11.1.1.4.37.58.38     Loaded
    audit     oracle.ide.audit     11.1.1.4.37.58.38     Loaded
    oracle.ide.indexing     oracle.ide.indexing     11.1.1.4.37.58.38     Loaded

  • Oracle 11R2 replication set up

    Hi all,
    I am new to oracle 11i and would like some thoughts on the implementing oracle replication.
    I am planning to install Oracle 11R2 64 bit on windows 2008 64 bit. We will have another server in other location. How can i set up replication between two server..
    what i need to set up on both server?
    Please guide or any good doc would be helpful
    thanks

    Pranav,
    Telling someone they "need" to install an expensive product is bad advice. Although your one over the world view of setting up GoldenGate is technically accurate, it also leaves out quite a bit, using a data pump, as an example.
    For the OP:
    Do you really mean 11i, as in E-Business Suite, or did you mean 11g, as in the RDBMS?
    Your choices are:
    Use what you've already paid for - Oracle Streams
    License another Oracle product - GoldenGate
    Buy a third party tool - Quest Shareplex, as an example
    Do your own replication - materialized views, triggers, database links, and so on.

  • Read only user creation for Oracle EM Console 11.1.1.5

    Dear All.
    I have created Read only user for Oracle EM Console.
    I have followed below link to do the same
    http://moshe-soa.blogspot.com/2011/09/blog-post.html.
    I have noticed with read only user is that TEST button in EM Console is active means user with read only user can create a trans, in Prod scenario it is a risk.
    Raised a CR with Oracle and found that it is a bug
    Bug 14082464 - CANNOT DISABLE TEST/TEST WEB SERVICE BUTTON IN SOA EM COSOLE is there in Metalink.
    So my question is there any way by which i can disable the TEST button in EM Conasole.
    I think there are some WLST script or servlet java class available to resolve this issue.
    Can any one confirm this and please suggest if any one aware of any alternative method.
    Thanks,

    Hi, have you got any solution to this problem? I am having exact the same issue in 11.1.1.6.

  • Error BACKINT for Oracle Connection

    hi @ maxdb gurus...
    i have a problem backing up my maxdb 7.6.0.033 (serving for a mysap.erp2005 on aix 5.3) using the backint mechanism.
    -> backup media created: two pipes and one parallel medium containing these pipes
    -> bsi.env has been created
    -> backint4sapdb.sar contains
       4 staging areas each with 4096 MB
       files per backint call 2
    -> maxdb is about 57 gb perm. data area (and 6 gb temp.)
    i use the backup wizard (dbmgui) to invoke a complete data backup which starts (pipes are created in the file system) and runs until approx. 4 gb...then the backup terminates with error "-24920 backup operation was unsuccesful. The database request failed with error -8020"
    what might be the problem? are the staging areas too small? is says that when using only one stage area it must hold the complete database...can i then conclude that 4 staging areas must hold the database as well - meaning they must be around 15 gb each?
    GreetZ, AH

    yup...but that also means that the sum of the staging areas need as much space as the database ie. around 70 gigs netto! the staging files will be filled and thus grow until the defined size, meaning that the file system(s) need to be big enough!
    everything works fine until the stage files are filled (up to the defined size) and then stops...when i change the sizes of the staging areas i can reproduce the error!
    i compared the tsm implementation of that system with another system (live cache...kind of small regarding db size...) and found nothing serious...
    -> dbm.ebp (AIX 5.3, MaxDB 7.6.0.033, ERP2005, TSM 5.3.3.0)
    2006-11-09 13:56:50
    Using environment variable 'TEMP' with value '' as directory for temporary files and pipes.
    Using environment variable 'TMP' with value '' as directory for temporary files and pipes.
    Using connection to Backint for MaxDB Interface.
    2006-11-09 13:56:50
    Checking existence and configuration of Backint for MaxDB.
        Using configuration variable 'BSI_ENV' = '/sapdb/data/wrk/TDV/bsi.env' as path of the configuration file of Backint for MaxDB.
        Setting environment variable 'BSI_ENV' for the path of the configuration file of Backint for MaxDB from '/sapdba/data/wrk/TDV/bsi.env' to configuration value '/sapdb/data/wrk/TDV/bsi.env'.
        Reading the Backint for MaxDB configuration file '/sapdb/data/wrk/TDV/bsi.env'.
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            Found keyword 'BACKINT' with value '/sapdb/TDV/db/bin/backint'.
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            Found keyword 'INPUT' with value '/sapdb/TDV/backup/backint4sapdb.in'.
            Found keyword 'OUTPUT' with value '/sapdb/TDV/backup/backint4sapdb.out'.
            Found keyword 'ERROROUTPUT' with value '/sapdb/TDV/backup/backint4sapdb.err'.
            The following line of the Backint for MaxDB configuration file does not start with a proper keyword and is ignored:
            Found keyword 'PARAMETERFILE' with value '/sapdb/data/wrk/TDV/backint4sapdb.par'.
            Found keyword 'TIMEOUT_SUCCESS' with value '6000'.
            Found keyword 'TIMEOUT_FAILURE' with value '300'.
        Finished reading of the Backint for MaxDB configuration file.
        Using '/sapdb/TDV/db/bin/backint' as Backint for MaxDB program.
        Using '/sapdb/TDV/backup/backint4sapdb.in' as input file for Backint for MaxDB.
        Using '/sapdb/TDV/backup/backint4sapdb.out' as output file for Backint for MaxDB.
        Using '/sapdb/TDV/backup/backint4sapdb.err' as error output file for Backint for MaxDB.
        Using '/sapdb/data/wrk/TDV/backint4sapdb.par' as parameter file for Backint for MaxDB.
        Using '6000' seconds as timeout for Backint for MaxDB in the case of success.
        Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
        Using '/sapdb/data/wrk/TDV/dbm.knl' as backup history of a database to migrate.
        Using '/sapdb/data/wrk/TDV/dbm.ebf' as external backup history of a database to migrate.
        Checking availability of backups using backint's inquire function.
    Check passed successful.
    2006-11-09 13:56:50
    Checking medium.
    Check passed successfully.
    2006-11-09 13:56:50
    Preparing backup.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'NEW'.
        Setting environment variable 'BI_BACKUP' to value 'FULL'.
        Constructed Backint for MaxDB call '/sapdb/TDV/db/bin/backint -u TDV -f backup -t file -p /sapdb/data/wrk/TDV/backint4sapdb.par -i /sapdb/TDV/backup/backint4sapdb.in -c'.
        Created temporary file '/sapdb/TDV/backup/backint4sapdb.out' as output for Backint for MaxDB.
        Created temporary file '/sapdb/TDV/backup/backint4sapdb.err' as error output for Backint for MaxDB.
        Writing '/sapdb/TDV/backup/back-tdv-data-m10.pipe #PIPE' to the input file.
        Writing '/sapdb/TDV/backup/back-tdv-data-m11.pipe #PIPE' to the input file.
    Prepare passed successfully.
    2006-11-09 13:56:51
    Creating pipes for data transfer.
        Creating pipe '/sapdb/TDV/backup/back-tdv-data-m10.pipe' ... Done.
        Creating pipe '/sapdb/TDV/backup/back-tdv-data-m11.pipe' ... Done.
    All data transfer pipes have been created.
    2006-11-09 13:56:51
    Starting database action for the backup.
        Requesting 'SAVE DATA QUICK TO '/sapdb/TDV/backup/back-tdv-data-m10.pipe' PIPE,'/sapdb/TDV/backup/back-tdv-data-m11.pipe' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACK-TDV-DATA-G1'' from db-kernel.
    The database is working on the request.
    2006-11-09 13:56:51
    Waiting until database has prepared the backup.
        Asking for state of database.
        2006-11-09 13:56:51 Database is still preparing the backup.
        Waiting 1 second ... Done.
        Asking for state of database.
        2006-11-09 13:56:52 Database is still preparing the backup.
        Waiting 2 seconds ... Done.
        Asking for state of database.
        2006-11-09 13:56:54 Database is still preparing the backup.
        Waiting 3 seconds ... Done.
        Asking for state of database.
        2006-11-09 13:56:57 Database is still preparing the backup.
        Waiting 4 seconds ... Done.
        Asking for state of database.
        2006-11-09 13:57:01 Database is still preparing the backup.
        Waiting 5 seconds ... Done.
        Asking for state of database.
        2006-11-09 13:57:06 Database has finished preparation of the backup.
    The database has prepared the backup successfully.
    2006-11-09 13:57:06
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process '/sapdb/TDV/db/bin/backint -u TDV -f backup -t file -p /sapdb/data/wrk/TDV/backint4sapdb.par -i /sapdb/TDV/backup/backint4sapdb.in -c >>/sapdb/TDV/backup/backint4sapdb.out 2>>/sapdb/TDV/backup/backint4sapdb.err'.
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    2006-11-09 13:57:06
    Waiting for end of the backup operation.
        2006-11-09 13:57:06 The backup tool is running.
        2006-11-09 13:57:06 The database is working on the request.
        2006-11-09 13:57:11 The backup tool is running.
        2006-11-09 13:57:11 The database is working on the request.
        2006-11-09 13:57:21 The backup tool is running.
        2006-11-09 13:57:21 The database is working on the request.
        2006-11-09 13:57:36 The backup tool is running.
        2006-11-09 13:57:36 The database is working on the request.
        2006-11-09 13:57:56 The backup tool is running.
        2006-11-09 13:57:56 The database is working on the request.
        2006-11-09 13:58:21 The backup tool is running.
        2006-11-09 13:58:21 The database is working on the request.
        2006-11-09 13:58:51 The backup tool is running.
        2006-11-09 13:58:51 The database is working on the request.
        2006-11-09 13:59:21 The database has finished work on the request.
        Receiving a reply from the database kernel.
        Got the following reply from db-kernel:
            SQL-Code              :-8020
            Date                  :20061109
            Time                  :00135703
            Database              :TDV
            Server                :r4335
            KernelVersion         :Kernel    7.6.00   Build 033-123-130-873
            PagesTransfered       :377688
            PagesLeft             :6903331
            MediaName             :BACK-TDV-DATA-G1
            Location              :/sapdb/TDV/backup/back-tdv-data-m10.pipe
            Errortext             :end of file
            Label                 :DAT_000000017
            IsConsistent          :true
            FirstLogPageNo        :247812
            DBStamp1Date          :20061109
            DBStamp1Time          :00135651
            BDPageCount           :7280971
            DevicesUsed           :2
            DatabaseID            :r4335:TDV_20061109_135703
            Max Used Data Page    :0
            Converter Page Count  :5201
        2006-11-09 13:59:21 The backup tool is running.
        2006-11-09 13:59:22 The backup tool process has finished work with return code 2.
        2006-11-09 13:59:22 The backup tool is not running.
    The backup operation has ended.
    2006-11-09 13:59:22
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -8020.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -8020.
    Reply buffer filled.
    2006-11-09 13:59:22
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /sapdb/TDV/backup/back-tdv-data-m11.pipe ... Done.
            Removing data transfer pipe /sapdb/TDV/backup/back-tdv-data-m10.pipe ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
        ---------- Begin of output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.out)----------
            Reading parameter file /sapdb/data/wrk/TDV/backint4sapdb.par.
            Using staging area /sapdb/TDV/backup/stage1 with a size of 1585446912 bytes.
            Using staging area /sapdb/TDV/backup/stage2 with a size of 1585446912 bytes.
            Using 1 file per Backint for Oracle call.
            Using /sapdb/TDV/dbs/backint as Backint for Oracle.
            Using /sapdb/TDV/dbs/initTDV.utl as parameterfile of Backint for Oracle.
            Using /sapdb/data/wrk/TDV/backint4oracle.his as history file.
            Using /sapdb/TDV/backup/backint4oracle.in as input of Backint for Oracle.
            Using /sapdb/TDV/backup/backint4oracle.out as output of Backint for Oracle.
            Using /sapdb/TDV/backup/backint4oracle.err as error output of Backint for Oracle.
            Using a maximal delay for a Backint for Oracle call of 60 seconds.
            Reading input file /sapdb/TDV/backup/backint4sapdb.in.
            Backing up pipe /sapdb/TDV/backup/back-tdv-data-m10.pipe.
            Backing up pipe /sapdb/TDV/backup/back-tdv-data-m11.pipe.
            Found 2 entries in the input file.
            Starting the backup.
            Starting pipe2file program(s).
            Waiting for creation of temporary files.
            1 temporary file is available for backup.
            Calling Backint for Oracle at 2006-11-09 13:59:20.
            Calling '/sapdb/TDV/dbs/backint -u TDV -f backup -t file -p /sapdb/TDV/dbs/initTDV.utl -i /sapdb/TDV/backup/backint4oracle.in -c' .
            Backint for Oracle ended at 2006-11-09 13:59:20 with return code 2.
            Backint for Oracle output:
            Backint for Oracle output:                          Data Protection for mySAP(R)
            Backint for Oracle output:
            Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
            Backint for Oracle output:              - Version 5, Release 3, Modification 2.0  for AIX LF 64-bit -
            Backint for Oracle output:                    Build: 275  compiled on Nov 20 2005
            Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2005, All Rights Reserved.
            Backint for Oracle output:
            Backint for Oracle output: BKI2027I: Using TSM-API version 5.3.3.0 (compiled with 5.3.0.0).
            Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
            Backint for Oracle output: BKI0005I: Start of program at: Thu Nov  9 13:59:20 MEZ 2006 .
            Backint for Oracle output: BKI5014E: Tivoli Storage Manager Error:
            Backint for Oracle output: ANS1035S (RC406)  Options file '*' could not be found.
            Backint for Oracle output:
            Backint for Oracle output: BKI0020I: End of program at: Thu Nov  9 13:59:20 MEZ 2006 .
            Backint for Oracle output: BKI0021I: Elapsed time: 00 sec .
            Backint for Oracle output: BKI0024I: Return code is: 2.
            Backint for Oracle output:
            Backint for Oracle error output:
            Finished the backup unsuccessfully.
            #ERROR /sapdb/TDV/backup/back-tdv-data-m10.pipe
            #ERROR /sapdb/TDV/backup/back-tdv-data-m11.pipe
        ---------- End of output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.out)----------
        Removed Backint for MaxDB's temporary output file '/sapdb/TDV/backup/backint4sapdb.out'.
        Copying error output of Backint for MaxDB to this file.
        ---------- Begin of error output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.err)----------
            Backint for Oracle was unsuccessful.
        ---------- End of error output of Backint for MaxDB (/sapdb/TDV/backup/backint4sapdb.err)----------
        Removed Backint for MaxDB's temporary error output file '/sapdb/TDV/backup/backint4sapdb.err'.
        Removed the Backint for MaxDB input file '/sapdb/TDV/backup/backint4sapdb.in'.
    Have finished clean up successfully.
    i invoke the backup through dbmgui, not dbmcli!
    any clues? thx in advance!
    GreetZ, AH

  • Need help for learning how to develop interfaces for Oracle R12 EBS

    Hi all,
    I need to learn how to create interfaces in PL/SQL for Oracle R12 EBS Financials. I cannot find a good starting point for the documentation and examples to help me get started in this area. Would appreciate tips
    for this area.

    Hi,
    What kind of interfaces you are planning to develop?
    Oracle already provides list of APIs that can be used (in R12, it is responsibility).
    Oracle Integration Repository Documentation Resources Release 12 [ID 396116.1]
    Oracle Integration Repository
    http://irep.oracle.com/index.html
    If those APIs do not satisfy your requirements, you can refer to "Oracle Applications Developer" guide as well as SQL-PL/SQL guides.
    Applications Releases 11i and 12
    http://www.oracle.com/technetwork/documentation/applications-167706.html
    Database Documentation -- SQL-PL/SQL
    http://www.oracle.com/technetwork/database/enterprise-edition/documentation/index.html
    Thanks,
    Hussein

  • Memory and No. of Processor calculation for Oracle EBS R11 and R12

    Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
    For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
    Please guide me on the same.
    Thanks,

    Please refer to the following links, it may be helpful:
    Oracle Applications Benchmark White Papers
    http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
    Oracle Applications Standard Benchmark White Papers
    http://www.oracle.com/apps_benchmark/html/white-papers.html
    Hardware requirements for Oracle APPS
    Hardware requirements for Oracle APPS

  • Using a SQL for Oracle in Microsoft Excel Query

    I am having the most difficult time (in fact, I can't get it to work) trying to use an SQL I created in Toad for Oracle. It works fine in Toad for Oracle...gives me all the data I need. I am trying to use it in Excel for users that don't know SQL or Oracle so they can use the query to extract data they need for Charts, Graphs, etc.
    Here is the SQL code from Toad for Oracle:
    /* Formatted on 2006/09/22 11:42 (Formatter Plus v4.8.6) */
    SELECT a_compl_summary.incident_number, a_compl_summary.case_number,
           a_compl_summary.part_sequence, a_compl_summary.part_number,
           a_compl_summary.lot_number, a_compl_summary.alert_date,
           a_compl_summary.entry_date, a_compl_summary.NAME,
           a_compl_summary.MONTH, a_compl_summary.product_family,
           a_compl_summary.complaint, a_compl_summary.reportable,
           a_compl_summary.product_returned, a_compl_summary.case_desc,
           a_compl_summary.failure_invest_desc, a_compl_summary.lhr_search,
           a_compl_summary.root_cause, a_compl_summary.corrective_action,
           a_compl_summary.region,
           rp_qa_reported_device_codes.reported_device_code,
           rp_qa_reported_device_codes.reported_dev_clarification,
           rp_qa_reported_device_codes.reported_dev_code_desc,
           rp_qa_patient_codes.patient_code,
           rp_qa_patient_codes.patient_code_clarif,
           rp_qa_patient_codes.patient_code_severity,
           rp_qa_patient_codes.description
      FROM chsuser.a_compl_summary,
           chsuser.rp_qa_patient_codes,
           chsuser.rp_qa_reported_device_codes
    WHERE (    (a_compl_summary.product_division = 'CP')
            AND (    a_compl_summary.entry_date >= :date1
                 AND a_compl_summary.entry_date <= :date2
            AND (   a_compl_summary.product_family LIKE :pf1
                 OR a_compl_summary.product_family LIKE :pf2
                 OR a_compl_summary.product_family LIKE :pf3
                 OR a_compl_summary.product_family LIKE :pf4
                 OR a_compl_summary.product_family LIKE :pf5
            AND (a_compl_summary.region = :r1)
            AND (   a_compl_summary.NAME = :c1
                 OR a_compl_summary.NAME = :c2
                 OR a_compl_summary.NAME = :c3
                 OR a_compl_summary.NAME = :c4
                 OR a_compl_summary.NAME = :c5
            AND (a_compl_summary.complaint = :yorn)
            AND (   rp_qa_reported_device_codes.reported_dev_clarification LIKE
                                                                              :cl1
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                                                                              :cl2
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                                                                              :cl3
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                                                                              :cl4
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                                                                              :cl5
            AND (rp_qa_reported_device_codes.reported_dev_clarification NOT LIKE
                                                                              :dc1
            AND (a_compl_summary.incident_number =
                                               rp_qa_patient_codes.incident_number
            AND (a_compl_summary.case_number = rp_qa_patient_codes.case_number)
            AND (a_compl_summary.part_sequence = rp_qa_patient_codes.part_sequence
            AND (a_compl_summary.incident_number =
                                       rp_qa_reported_device_codes.incident_number
            AND (a_compl_summary.case_number =
                                           rp_qa_reported_device_codes.case_number
            AND (a_compl_summary.part_sequence =
                                         rp_qa_reported_device_codes.part_sequence
            AND (rp_qa_reported_device_codes.incident_number =
                                               rp_qa_patient_codes.incident_number
            AND (rp_qa_reported_device_codes.case_number =
                                                   rp_qa_patient_codes.case_number
            AND (rp_qa_reported_device_codes.part_sequence =
                                                 rp_qa_patient_codes.part_sequence
           )Can someone help me...maybe point out what I'm doing wrong.
    Note: I also tried creating this query in Microsoft Query (the simple way) and when I first create it...it works...But then if I go back in to edit the query, and refresh the query or try to Return data to Excel, it gives me a ORA-00936 error message.
    Why it works when I first create the query in Excel, I don't know. But I have to validate the queries I'm creating (SQL or not) and I can't validate it if every time I go into edit the query (which may have to happen; that's why I have to fix this before I can submit my validation).
    Anyway, any help would be greatly appreciated.

    Okay, I know I'm replying to my own threads here...but I want to add a little bit more information again.
    I was successful in figuring out that changing the :criteria to a ? worked.
    I tested this on 1 criteria at a time. Adding one more scenario ? at at time.
    It only worked up until about 3 scenarios of each criteria.
    Then when I refreshed the query in Microsoft Excel Query, I got an "out of memory" error, and then it ended up just erasing the SQL I had been using.
    Here's the SQL I had where it gave me this error. Am I possibly just making Excel work too hard? It just doesn't make sense because Toad for Oracle handled it in like 4 seconds. Which brings me back to an intial question I had. Can Excel use Toad for Oracle somehow?
    Here's the code:
    SELECT a_compl_summary.incident_number, a_compl_summary.case_number,
           a_compl_summary.part_sequence, a_compl_summary.part_number,
           a_compl_summary.lot_number, a_compl_summary.alert_date,
           a_compl_summary.entry_date, a_compl_summary.NAME,
           a_compl_summary.MONTH, a_compl_summary.product_family,
           a_compl_summary.complaint, a_compl_summary.reportable,
           a_compl_summary.product_returned, a_compl_summary.case_desc,
           a_compl_summary.failure_invest_desc, a_compl_summary.lhr_search,
           a_compl_summary.root_cause, a_compl_summary.corrective_action,
           a_compl_summary.region,
           rp_qa_reported_device_codes.reported_device_code,
           rp_qa_reported_device_codes.reported_dev_clarification,
           rp_qa_reported_device_codes.reported_dev_code_desc,
           rp_qa_patient_codes.patient_code,
           rp_qa_patient_codes.patient_code_clarif,
           rp_qa_patient_codes.patient_code_severity,
           rp_qa_patient_codes.description
      FROM chsuser.a_compl_summary,
           chsuser.rp_qa_patient_codes,
           chsuser.rp_qa_reported_device_codes
    WHERE (    (a_compl_summary.incident_number =
                                               rp_qa_patient_codes.incident_number
            AND (a_compl_summary.case_number = rp_qa_patient_codes.case_number)
            AND (a_compl_summary.part_sequence = rp_qa_patient_codes.part_sequence
            AND (a_compl_summary.incident_number =
                                       rp_qa_reported_device_codes.incident_number
            AND (a_compl_summary.case_number =
                                           rp_qa_reported_device_codes.case_number
            AND (a_compl_summary.part_sequence =
                                         rp_qa_reported_device_codes.part_sequence
            AND (rp_qa_reported_device_codes.incident_number =
                                               rp_qa_patient_codes.incident_number
            AND (rp_qa_reported_device_codes.case_number =
                                                   rp_qa_patient_codes.case_number
            AND (rp_qa_reported_device_codes.part_sequence =
                                                 rp_qa_patient_codes.part_sequence
    AND (a_compl_summary.product_division = 'CP')
            AND (    a_compl_summary.entry_date >= ?
                 AND a_compl_summary.entry_date <= ?
            AND (   a_compl_summary.product_family LIKE ?
                 OR a_compl_summary.product_family LIKE ?
                 OR a_compl_summary.product_family LIKE ?
                 OR a_compl_summary.product_family LIKE ?
                 OR a_compl_summary.product_family LIKE ?
            AND (a_compl_summary.region = ?)
            AND (   a_compl_summary.NAME = ?
                 OR a_compl_summary.NAME = ?
                 OR a_compl_summary.NAME = ?
                 OR a_compl_summary.NAME = ?
                 OR a_compl_summary.NAME = ?
            AND (a_compl_summary.complaint = ?)
            AND (   rp_qa_reported_device_codes.reported_dev_clarification LIKE
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
                 OR rp_qa_reported_device_codes.reported_dev_clarification LIKE
            AND (rp_qa_reported_device_codes.reported_dev_clarification NOT LIKE
               ))

  • DBAShell - New Open Source Project for Oracle DBA's

    I'd like to have this project included in the Open Source Oracle tools list at: http://www.oracle.com/technology/community/opensource_projects.html
    I’'ve been an Oracle DBA for quite some time (since 7.0.13) and a developer for many years. One of the things I'’ve always wished for was an easier way to set up environment variables for different Oracle Home’s and a way to provide passwords to scripts without embedding them in plain-view.
    About 3 years ago, I started a set of functions and scripts at my company that did exactly just that and provided many more functions for things like checking database status, running scripts quietly unless errors are detected, running actions in parallel (like fast shutdowns at once, or multiple analyzes), restarting databases in a guaranteed fashion, aliases to common folder locations, etc..
    About a month ago, after putting all this time and effort into these scripts and using them in production all this time, I realized I wanted more out of the scripts like support for other databases and thought that it would be best if I gave it new life as an Open Source project.
    So that is how http://sourceforge.net/projects/dbashell/ was started. Now it’s in a second release (DBAShell 0.85) that is more modular and would allow other people to easily add support for other OS’s, other Shells, and other Databases.
    Here is a description of the project from the latest news item:
    DBAShell is a project based around Shell functions and scripts designed to make it easy for DBA's to use Databases in a command line environment. Currently supported is Oracle with ksh and bash on AIX, Solaris, Linux. The code base itself is 3 years old and has been in use in Production environments all of that time.
    Features include:
    * Automatic setting of all environment variables based on SID requested.
    * Manage PATH's and other path like variables for each ORACLE_HOME needed.
    * Run scripts with stored passwords (no more hard-coding of passwords!!)
    * Automatically set SID based on Script location (makes it easier to share scripts between SID's)
    * manage temporary script output and check for oracle errors in output
    * check database status and versions from scripts
    * stop/start databases in parallel (faster startup)
    * compile all database objects
    * analyze objects in parallel (Faster analyzes)
    * set aliases and variables for common SID areas, etc..
    * many helpful commands for common Oracle tasks
    Over a thousand people have already downloaded the prior release and more are downloading every hour.
    I'm seeking feedback from anybody that would be willing to take a look at the project, trying it out, give me any feedback you have on it, and perhaps even direct me to where I could best promote this project.
    I wrote a tutorial that shows at a glance some of the more useful features of DBAShell:
    http://sourceforge.net/docman/display_doc.php?docid=34041&group_id=170224
    Main site:
    http://sourceforge.net/projects/dbashell/
    Documentation: http://sourceforge.net/docman/display_doc.php?docid=33704&group_id=170224
    Download:
    http://prdownloads.sourceforge.net/dbashell/dbashell-0.85.tar.gz?download

    Always glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.

  • DBAShell - Open Source project for Oracle DBA's

    I’ve been an Oracle DBA for quite some time (since 7.0.13) and a developer for many years. One of the things I’ve always wished for was an easier way to set up environment variables for different Oracle Home’s and a way to provide passwords to scripts without embedding them in plain-view.
    About 3 years ago, I started a set of functions and scripts at my company that did exactly just that and provided many more functions for things like checking database status, running scripts quietly unless errors are detected, running actions in parallel (like fast shutdowns at once, or multiple analyzes), restarting databases in a guaranteed fashion, aliases to common folder locations, etc..
    About a month ago, after putting all this time and effort into these scripts and using them in production all this time, I realized I wanted more out of the scripts like support for other databases and thought that it would be best if I gave it new life as an Open Source project.
    So that is how http://sourceforge.net/projects/dbashell/ was started. Now it’s in a second release (DBAShell 0.85) that is more modular and would allow other people to easily add support for other OS’s, other Shells, and other Databases.
    Here is a description of the project from the latest news item:
    DBAShell is a project based around Shell functions and scripts designed to make it easy for DBA's to use Databases in a command line environment. Currently supported is Oracle with ksh and bash on AIX, Solaris, Linux. The code base itself is 3 years old and has been in use in Production environments all of that time.
    Features include:
    * Automatic setting of all environment variables based on SID requested.
    * Manage PATH's and other path like variables for each ORACLE_HOME needed.
    * Run scripts with stored passwords (no more hard-coding of passwords!!)
    * Automatically set SID based on Script location (makes it easier to share scripts between SID's)
    * manage temporary script output and check for oracle errors in output
    * check database status and versions from scripts
    * stop/start databases in parallel (faster startup)
    * compile all database objects
    * analyze objects in parallel (Faster analyzes)
    * set aliases and variables for common SID areas, etc..
    * many helpful commands for common Oracle tasks
    Over a thousand people have already downloaded the prior release and more are downloading every hour.
    I'm seeking feedback from anybody that would be willing to take a look at the project, trying it out, give me any feedback you have on it, and perhaps even direct me to where I could best promote this project.
    I wrote a tutorial that shows at a glance some of the more useful features of DBAShell:
    http://sourceforge.net/docman/display_doc.php?docid=34041&group_id=170224
    Main site:
    http://sourceforge.net/projects/dbashell/
    Documentation: http://sourceforge.net/docman/display_doc.php?docid=33704&group_id=170224
    Download:
    http://prdownloads.sourceforge.net/dbashell/dbashell-0.85.tar.gz?download

    Always glad to have people thinking about the poor DBA's. Usually, the developers get most of the attention in open source.

  • How to configure Workflow Notification Mailer for oracle alert in R12

    Hi all....,
    How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
    Regards ,
    Madhan

    Duplicate thread (please post only once)
    plz help me...!!!! Workflow Notification Mailer
    plz help me...!!!! Workflow Notification Mailer

  • Patch number of Solaris 9 SPARC for Oracle 9.2.0.4 - 9.2.0.7

    Hello!
    Could anybody point me the right document with information about
    Solaris 9 patch version for Oracle 9.2.0.4 and 9.2.0.7.
    Server: FS PRIMEPOWER 250 SPARC64™ V
    Thanks,
    Viacheslav

    Hi,
    such information is only available on metalink, you need a valid support contract, resp. a CSI (Customer Support Identifier) .
    Werner

  • How can I use custom WLST commands for Oracle SOA Suite in Weblogic

    Hi There,
    I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
    I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
    However, my WLST shell is not recognizing the commands and giving me the NameError!
    wls:/devDomain1/domainRuntime> listLogs()
    Traceback (innermost last):
    File "<console>", line 1, in ?
    NameError: listLogs
    I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
    I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
    - Launched the WLST shell from Oracle Home.
    cd ORACLE_HOME/common/bin
    ./wlst.sh
    - Tried to run the listLogs command from domainRuntime()
    I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
    I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
    There is no SOA Suite installed.
    Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
    Please advise if this is possible and how?
    Cheers.
    Satish

    I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
    CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
    The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
    I hope this can help

  • How to choose a right server for Oracle Database!

    Hi all,
    Is there any formular that allows me to find the appropriate server configuration for Oracle database 11g?
    Please help!
    Thank you all.
    Dan.
    Edited by: Dan on 01:45 06-01-2013

    Simply put ... no.
    Determining the correct server is a dance between hardware vendors (one point of input to be treated with general distrust), internal expertise and experience working with similar systems, and most importantly understanding the behaviour of what you are building.
    Here are some sample questions to start the ball rolling.
    1. What operating system expertise does your organization have?
    2. What operating system expertise is readily available in the community from which you hire applicants?
    3. What type of application?
    4. What are up-time expectations?
    5. Requirements for high availability?
    6. Requirements for time to perform a full recovery?
    7. Requirements for security?
    8. Storage footprint (dictates internal storage versus SAN, NAS, or ZFS)
    9. Anticipated growth (3-7 years)
    Everyone wants to sell you CPU clock-ticks, more RAM, more IOPS, etc. But the first thing you need to understand is the capabilities you require that are generic: Required of any solution. Only when you have a clear understanding of these factors are you ready to discuss whether the solution is a pizza box or an ODA ... an Exadata or an IBM System Z.
    Far too often I find people purchasing RAM they don't need with CPU speeds that exceed the ability of their network infrastructure to move the data so pay special attention when you are ready to make your purchase to engineered systems like the ODA.

Maybe you are looking for

  • Values not showing up in Report

    Hello experts, I have saved data using Input schedules for certain combinations. Now I want to see the data in the report but here the problem, I am able to do so if I am giving the exact combinations as there in IS. For example: I have entered data

  • How many users can 1 Xserve support?

    I have one Xserve (10.5.2, 2x3GHz, 5GB RAM, 1.34TB RAID 5) that I want to support the following services for my SMB: DNS, DHCP AFP, NFS, SMB Open Directory Print Software Update I also want to have mobile sync'd network home folders, but only for ~/D

  • The other section on my iPod touch is 1.73GB!

    Connected my iPod touch (4th Generation) to iTunes and noticed how high the 'other' section on it is. I do not have much album artwork or many notes or contacts. Why is the 'other' stuff taking up so much memory on my iPod and how can I delete it? Th

  • Problen in assigning partner function at the time of creation of lead .

    Hi ALL ,           I have requirement , where as soon as bp will be created a lead has to be generated mentioning the BP as sales prospect (partner function) . I have to assign  employee reponsible partner  function too in lead , at the same time . I

  • Itunes icons not shown correctly after install of itunes 7

    hey everyone, on my windows pc , i installed itunes 7 and the icones dont appear as the normal itunes disc with music note, what may be wrong and how can i fix this. ? thanks in advance.