OS X Server 10.4.11 to 10.5 - Upgraging vs Migration

Hi,
I am passing from 10.4.11 to 10.5. I have about 1000 accounts. Which one will give me the best results and a minimum of issues: upgrading or migrating?
Thanks

I did this about 6 months ago and chose the migration (about 700 users), worked without any problems. Also make sure you have a complete backup i.e has Mabel stated a tested bootable backup of your system disk and also all your users data. You must be able to get back to how it was before if there are problems.
I take it you have built a test server with 10.5 and tested all the services/software that you will need run.
regards

Similar Messages

  • Issue with migration DB from SQL Server 2005 to Oracle 11.2 using SQL Developer Migration workbench

    Hi,
    We face an issue while migrating an SQL Server 2005 DB to Oracle 11.2.  It fails during the process.  I hope someone on the forum has seen this before and can give us some advice.
    I use the latest version of SQL Developer with JRE included (3.2.20.09).  The JDBC driver to connect to SQL Server 2005 is 1.2.0
    Here are the steps we take in the Migration Workbench wizard:
    I made an online extract of the SQL Server database.
    Using the workbench in SQL Developer I created a migration repository in schema PDM_MIGRATION.
    Next I start the migration, it captures the tables fine, but immediately after the start of the conversion I get a failed message without further explanations.
    This is the content of the error xml:
    <?xml version="1.0" encoding="windows-1252" standalone="no"?>
    <log>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>SEVERE</level>
      <class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
      <message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@4c12ab</param>
      <exception>
        <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>1078</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>316</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>1002</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>303</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>205</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>159</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
          <line>193</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
          <line>515</line>
        </frame>
        <frame>
          <class>java.util.concurrent.Executors$RunnableAdapter</class>
          <line>441</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>886</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>908</line>
        </frame>
        <frame>
          <class>java.lang.Thread</class>
          <line>662</line>
        </frame>
      </exception>
    </record>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>SEVERE</level>
      <class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
      <message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
      <param>oracle.dbtools.migration.convert.ConverterWorker.copyModel(ConverterWorker.java:1078)</param>
      <param>oracle.dbtools.migration.convert.ConverterWorker.runConvert(ConverterWorker.java:316)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doConvert(FullMigrateTask.java:1002)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:303)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:205)</param>
      <param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:159)</param>
      <param>oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)</param>
      <param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
      <param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
      <param>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)</param>
      <param>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)</param>
      <param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
      <param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
      <param>java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)</param>
      <param>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)</param>
      <param>java.lang.Thread.run(Thread.java:662)</param>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@5dc1bc</param>
      <exception>
        <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>1078</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.convert.ConverterWorker</class>
          <line>316</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>1002</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>303</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>205</line>
        </frame>
        <frame>
          <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
          <line>159</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
          <line>193</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
          <line>515</line>
        </frame>
        <frame>
          <class>java.util.concurrent.Executors$RunnableAdapter</class>
          <line>441</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask$Sync</class>
          <line>303</line>
        </frame>
        <frame>
          <class>java.util.concurrent.FutureTask</class>
          <line>138</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>886</line>
        </frame>
        <frame>
          <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
          <line>908</line>
        </frame>
        <frame>
          <class>java.lang.Thread</class>
          <line>662</line>
        </frame>
      </exception>
    </record>
    <record>
      <date>2013-08-14T16:23:32</date>
      <logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
      <level>WARNING</level>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <message>Building converted model: FAILED : Database Migration : FAILED</message>
      <param>oracle.dbtools.migration.workbench.core.logging.LogInfo@15a3779</param>
    </record>
    Does anybody know what this error means and what steps we should take to continue the migration?
    I see the PDM_MIGRATION.MIGR_FILTER is a type.
    Many thanks in advance,
    Kris

    Hi Wolfgang,
    Thanks for your reply.
    This is how the type MIGR_FILTER looks like:
    create or replace
    TYPE MIGR_FILTER IS OBJECT (
      FILTER_TYPE INTEGER, -- Filter Types are 0-> ALL, 1->NAMELIST, 2->WHERE CLAUSE, 3->OBJECTID LIST
      OBJTYPE VARCHAR2(40),
      OBJECTIDS OBJECTIDLIST,
      NAMES NAMELIST,
      WHERECLAUSE VARCHAR2(1000));
    I think the repository user has the correct privileges.  This is the overview of privileges it has:
    SQL> select * from dba_sys_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
    GRANTEE PRIVILEGE ADM
    PDM_MIGRATION ALTER SESSION NO
    PDM_MIGRATION CREATE CLUSTER NO
    PDM_MIGRATION CREATE DATABASE LINK NO
    PDM_MIGRATION CREATE PROCEDURE NO
    PDM_MIGRATION CREATE SEQUENCE NO
    PDM_MIGRATION CREATE SESSION NO
    PDM_MIGRATION CREATE SYNONYM NO
    PDM_MIGRATION CREATE TABLE NO
    PDM_MIGRATION CREATE TRIGGER NO
    PDM_MIGRATION CREATE VIEW NO
    PDM_MIGRATION UNLIMITED TABLESPACE NO
    SQL> select * from dba_role_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
    GRANTEE GRANTED_ROLE ADM DEF
    PDM_MIGRATION CONNECT NO  YES
    PDM_MIGRATION RESOURCE NO  YES
    Best regards,
    Kris

  • What to do whit this problem: de server reageerd met 403 op de bewerking cal dav migrate to server queueble operation

    problem with agenda no connection to icloud
    Server: 403 caldavmigratetoserver queueble operation

    I have the same problem. No explanation. what bugware this is. I cannot shut down iCloud because it threatens: if you stop using icloud for calendars, calendars stored in icloud  will be deleted from this Mac.

  • Sql Server Management Assistant (SSMA) Oracle okay for large database migrations?

    All:
    We don't have much experience with the SSMA (Oracle) tool and need some advice from those of you familiar with it.  We must migrate an Oracle 11.2.0.3.0 database to SQL Server 2014.  The Oracle database consists of approximately 25,000 tables and 30,000
    views and related indices.  The database is approximately 2.3 TB in size.
    Is this do-able using the latest version of SSMA-Oracle?  If so, how much horsepower would you throw at this to get it done?
    Any other gotchas and advice appreciated.
    Kindest Regards,
    Bill
    Bill Davidson

    Hi
    Bill,
    SSMA supports migrating large database of Oracle. To migrate Oracle database to SQL Server 2014, you could use the latest version:
    Microsoft SQL Server Migration Assistant v6.0 for Oracle. Before the migration, you should pay attention to the points below.
    1.The account that is used to connect to the Oracle database must have at least CONNECT permissions. This enables SSMA to obtain metadata from schemas owned by the connecting user. To obtain metadata for objects in other schemas and then convert objects
    in those schemas, the account must have the following permissions: CREATE ANY PROCEDURE, EXECUTE ANY PROCEDURE, SELECT ANY TABLE, SELECT ANY SEQUENCE, CREATE ANY TYPE, CREATE ANY TRIGGER, SELECT ANY DICTIONARY.
    2.Metadata about the Oracle database is not automatically refreshed. The metadata in Oracle Metadata Explorer is a snapshot of the metadata when you first connected, or the last time that you manually refreshed metadata. You can manually update metadata
    for all schemas, a single schema, or individual database objects. For more information about the process, please refer to the similar article: 
    https://msdn.microsoft.com/en-us/library/hh313203(v=sql.110).
    3.The account that is used to connect to SQL Server requires different permissions depending on the actions that the account performs as the following:
     • To convert Oracle objects to Transact-SQL syntax, to update metadata from SQL Server, or to save converted syntax to scripts, the account must have permission to log on to the instance of SQL Server.
     • To load database objects into SQL Server, the account must be a member of the sysadmin server role. This is required to install CLR assemblies.
     • To migrate data to SQL Server, the account must be a member of the sysadmin server role. This is required to run the SQL Server Agent data migration packages.
     • To run the code that is generated by SSMA, the account must have Execute permissions for all user-defined functions in the ssma_oracle schema of the target database. These functions provide equivalent functionality of Oracle system functions, and
    are used by converted objects.
     • If the account that is used to connect to SQL Server is to perform all migration tasks, the account must be a member of the sysadmin server role.
    For more information about the process, please refer to the  similar article: 
    https://msdn.microsoft.com/en-us/library/hh313158(v=sql.110)
    4.Metadata about SQL Server databases is not automatically updated. The metadata in SQL Server Metadata Explorer is a snapshot of the metadata when you first connected to SQL Server, or the last time that you manually updated metadata. You can manually update
    metadata for all databases, or for any single database or database object.
    5.If the engine being used is Server Side Data Migration Engine, then, before you can migrate data, you must install the SSMA for Oracle Extension Pack and the Oracle providers on the computer that is running SSMA. The SQL Server Agent service must also
    be running. For more information about how to install the extension pack, see Installing Server Components (OracleToSQL). And when SQL Express edition is used as the target database, only client side data migration is allowed and server side data migration
    is not supported. For more information about the process, please refer to the  similar article: 
    https://msdn.microsoft.com/en-us/library/hh313202(v=sql.110)
    For how to migrate Oracle Databases to SQL Server, please refer to the  similar article: 
    https://msdn.microsoft.com/en-us/library/hh313159(v=sql.110).aspx
    Regards,
    Michelle Li

  • JBoss 4 to Sun Application Server...where to start

    Hi there...
    I'm charged with making sure my company's product, which has mostly been running on JBoss, works w/ Sun Application Server.
    I've been trying to use the Migration Tool with poor results...I know some of it is because it's for JBoss 3 and not 4....
    giving it the entire .EAR for our product tells me that it doesn't handle webservices...diving into the EAR's JAR containing our services and removing webservices.xml gives the same result of various permutations of putting in source code / xml leads , namely it runs and then freezes with
    DefaultValidationEventHandler: [FATAL_ERROR]: Premature end of file.
    Location:
    DefaultValidationEventHandler: [ERROR]: Unexpected element {}:ejb-local-ref
    Location:
    back on the console I launched the UI from
    To possibly oversimplify, I copied out some of the most relevant .xml we have,
    ejb-jar.xml
    jboss.xml
    jbosscmp-jdbc.xml
    jboss-web.xml
    web.xml
    and put them in a single directory...now the Migration tool runs, leaves most of the files unchanged, and for our ejb-jar.xml it fails, and says
    Unknown error.
    EjbJar is Null
    Admittedly our ejb-jar.xml is handcrafted and maybe suspect, but still.
    So I guess right now I'm not too optimistic about this tool.
    Some of the problem is my understanding of what all goes in an EAR in terms of DD is weak. I'm trying to smarten up, but haven't found a good description of "these are the typical DD files for Sun Application Server", with examples or precise descriptions of the contents...and the migration tool doesn't get to the point where it's making some of the files i expected based on
    http://java.sun.com/j2ee/tools/migration/doc/JBOSS3.0_S1AS7.html
    (for example sun-cmp-mappings.xml doesn't appear anywhere in the AppServer\docs directory... )
    Any pointers or advice appreciated...

    There is an article, while it is for Application Server 7, it still could be useful:
    http://developers.sun.com/prodtech/javatools/jsenterprise/reference/docs/jse7/jse7_jboss_plugin.html

  • Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365

    Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
    Im thinking
    BPA for AD (health check)
    Add the Server2012R2 as a DC
    Ensure replication
    Move DHCP
    Change DNS
    Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option  as I have 28 users and the essentials service would make everything quite nice for remote access and backups
    etc....  however I don't know whether to just use dirsync with password replication instead ?
    Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
    instead to sync up to azure ?
    Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
    However I have read when migrating to 365 was using exchange 2010 there was a application
    to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
    along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
    cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
    then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
    I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
    http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
    http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
    http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserver

    Hi,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    à
    Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
    and sync'ing people to the cloud?
    I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
    then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
    Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
    Regarding to migrate Exchange to Office 365, please refer to following articles.
    Migrate
    All Mailboxes to the Cloud with a Cutover Exchange Migration
    Step-By-Step:
    Migrating from Exchange 2007 to Office 365
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Meanwhile, there is an additional article that you can refer to:
    Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
    If anything I misunderstand, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Is Exchange 2010 supported on Windows Server 2012 R2?

    According to the 
    Understanding Exchange 2007 upgrade prerequisites, https://technet.microsoft.com/en-US/Library/ee958305
    these are the supported windows operating systems
    64-bit edition of Windows Server 2008 Standard Service Pack 2
    64-bit edition of Windows Server 2008 Enterprise Service Pack 2
    64-bit edition of Windows Server 2008 Standard R2
    64-bit edition of Windows Server 2008 Enterprise R2
    has this list been
    upgraded to include Windows server 2012 R2?? I am planning to migrate my Exchange 2007 server to 2010.
    I have a downgrade license to 2008 STD R2, so i am wondering if i will have to downgrade the OS.
    Thanks
    B
    Bobby

    It's supported on Windows Server 2012 but NOT R2
    https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx

  • SQL Server Reporting Services FAQ

    Hi All,
    This thread is a summary of the Frequently Asked Questions on SQL Server Reporting Services. We consolidate them and post here for your reference. If you have any further questions, please kindly start a new thread so that more community members, MVPs, and MSFTs can join the discussion and share their ideas. Thanks for your understanding.
    Part I: SQL Server Reporting Services General Topics
    1. How to migrate SQL Server 2008 Reporting Services to another computer?
    2. How to combine connecting string via parameter?
    3. How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
    4. Error of EXECUTE permission denied on object 'xp_sqlagent_notify'.
    5. Security consideration for anonymous access to Report Server.
    6. How to create a custom report template in Reporting Services?
    7. Does Reporting Services support horizontal tables which have fixed rows and dynamic columns?
    8. How to reset the page number back to 1 every time the report gets a group break?
    9. How to open the drill- through report in a new browser window?
    10. How to verify the version of SQL Server?
    11. How to use multiple datasets?
    12. How to upgrade report from SQL Server 2000 to SQL Server 2005?
    13. Out of memory error when exporting reports to Excel.
    14. How to improve PDF quality of the report exported in Reporting Services 2005?
    15. How to enable the Select All option for a multi-value parameter?
    Part II: SQL Server Reporting Services SharePoint Integrated Mode Topics
    1. How to deploy reports to SQL Server Reporting Services in SharePoint Services integrated mode?
    2. How to integrate SQL Server Reporting Services and SharePoint Services?
    3. How to refer the reports on the Report Server in SharePoint Services?
    4. How to manage user to view reports in SharePoint integrated mode?
    5. What information is needed when posting questions regarding SharePoint integrated mode?
    6. Is Report Builder available in SharePoint Integrated Mode?
    PLEASE NOTE: Microsoft does not offer formal support for the communities you'll find here. Instead, our role is to provide a platform for people who want to take advantage of the global community of Microsoft customers and product experts. Microsoft may monitor content to ensure the accuracy of the information you'll find, but any information provided by Microsoft staff is offered "AS IS" with no warranties, and no rights are conferred. You assume all risk for your use.
    Microsoft Online Community Support

    1.        Question 3: How to install a 32-bit version of SQL Server 2005 Reporting Services on a computer that is running a 64-bit version of Windows?
    Answer: 
    To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 6.0, we can follow these following steps:
    1.       Uninstall the 64-bit version of Reporting Services.
    Note: Side-by-side installations of 32-bit versions of Reporting Services and 64-bit versions of Reporting Services are not supported.
    2.       Run the Dotnetfx64.exe file to manually install the .NET Framework.
    The Dotnetfx64.exe file is in the Tools\redist\2.0 folder on the SQL Server 2005 Setup media. To download the Dotnetfx64.exe file, visit the following Microsoft Web site:
    http://go.microsoft.com/fwlink/?LinkId=70186
    3.       In IIS Manager, click Web Server Extensions.
    4.       In the Details pane, right-click ASP.NET V2.0.50727, and then click Allow.
    5.       Right-click Web Sites, and then click Properties.
    6.       Click the ISAPI Filters tab.
    7.       In the Filter Name column, click ASP.NET_2.0.50727, and then click Edit.
    8.       Replace C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\aspnet_filter.dll with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_filter.dll.
    Note: The Aspnet_filter.dll file in the C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ folder is a 32-bit version of the file.
    9.       Click OK two times, and then close IIS Manager.
    10.   At a command prompt, run the following command:
    cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
    11.   Install the 32-bit version of Reporting Services.
    12.   After setup is complete, open IIS Manager, and then click Web Server Extensions.
    13.   In the Details pane, right-click ASP.NET V2.0.50727 (32-bit), and then click Allow.
    To install the 32-bit version of Reporting Services on a computer that is running the 64-bit version of IIS 7.0, follow these steps:
    1.       Enable ASP.NET and IIS before you install Reporting Services.
    2.       Open a command prompt. To do this, click Start, point to All Programs, point to Accessories, right-click Command Prompt, and then click Run as administrator.
    3.       In the User Account Control dialog box, click Continue.
    4.       Copy the following script:
    cscript %SystemDrive%\inetpub\AdminScripts\adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1
    5.       In the upper-left corner of the Command Prompt window, right-click the command prompt icon, click Edit, and then click Paste.
    6.       Press ENTER to run the script.
    7.       Install the 32-bit version of Reporting Services. You must apply SQL Server 2005 Service Pack 2 (SP2) after you install Reporting Services in Windows Vista. If you install SQL Server 2005 Express Edition with Advanced Services, you can run SQL Server 2005 Express Edition with Advanced Services SP2.
    For more information, visit the following Microsoft Web site:
    Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2
    http://go.microsoft.com/fwlink/?LinkID=63922
    8.       Reset IIS.
    9.       Configure the report server for local administration. To access the report server and Report Manager locally, follow these steps:
    a.       Start Microsoft Internet Explorer.
    b.      On the Tools menu, click Internet Options.
    c.       Click Security.
    d.      Click Trusted Sites.
    e.      Click Sites.
    f.        Under Add this website to the zone, type http://servername.
    g.       If you are not using HTTPS for the default site, click to clear the Require server certification (https:) for all sites in this zone check box.
    h.      Click Add.
    i.         Repeat steps f and g to add http://localhost, and then click Close.
    10.   This step lets you start Internet Explorer either to localhost or to the network computer name of the server for both Report Server and Report Manager.
    a.       Create role assignments that explicitly grant you full-permissions access. To do this, follow these steps:  
    b.      Start Internet Explorer by using the Run as administrator option. To do this, click Start, click All Programs, right-click Internet Explorer, and then click Run as administrator.
    c.       Start Report Manager.
    d.      Note By default, the Report Manager URL is http://servername/reports. If you are using SQL Server 2005 Express Edition with Advanced Services SP2, the Report Manager URL is http://servername/reports$sqlexpress. If you are using a named instance of Reporting Services, the Report Manager URL is http://servername/reports$InstanceName
    e.      On the Home page, click Properties.
    f.        Click New Role Assignment.
    g.       Type a Windows user account in the following format: domain\user
    h.      Click to select the Content Manager check box.
    i.         Click OK.
    j.        In the upper-right corner of the Home page, click Site Settings.
    k.       Click Configure site-wide security.
    l.         Click New Role Assignment.
    m.    Type a Windows user account in the following format: domain\user
    n.      Click to select the System Administrator check box.
    o.      Click OK.
    p.      Close Report Manager.
    11.   Open Report Manager in Internet Explorer without using the Run as administrator option.
    Microsoft Online Community Support

  • Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

    We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
    After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
    Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
    <Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
    java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
    at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
    Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
    The WebLogic Server encountered a critical failure
    Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
    Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
    at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
    Thanks,
    Jp

    Hi,
    I found an oracle note with the next solution:
    Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
    1. Go into WebLogic Console
    2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
    3. Add -Xverify:none to the arguments
    4. Restart the WebLogic server
    5. Retest the issue.
    6. Migrate the solution as appropriate to other environments.
    Or
    If you're not using Node Manager to start managed servers:
    Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
    See if it works for you
    Arik

  • Server 2012 r2 live migration fails with hardware error

    Hello all, we just upgraded one of our hyper v hosts from server 2012 to server 2012 r2; previously we had live replication setup between it and another box on the network which was also running server 2012. After installing server 2012 r2 when a live migration
    is attempted we get the message:
    "The virtual machine cannot be moved to the destination computer. The hardware on the destination computer is not compatible with the hardware requirements of this virtual machine. Virtual machine migration failed at migration source."
    The servers in question are both dell, currently we have a poweredge r910 running server 2012 and a poweredge r900 running server 2012 r2. The section under processor for "migrate to a physical computer using a different processor" is already checked
    and this same vm was successfully being live replicated before the upgrade to server 2012 r2. What would have changed around hardware requirements?
    We are migrating from server 2012 on the poweredge r910 to server 2012 r2 on the poweredge r900. Also When I say this was an upgrade, we did a full re install and wiped out the installation of server 2012 and installed server 2012 r2, this was not an upgrade
    installation.

    The only cause I’ve seen so far is virtual switches being named differently. I do remember that one of our VMs didn’t move, but we simply bypassed this problem, using one-time backup (VeeamZIP, more specifically).
    If it’s one-time operation you can use the same procedure for the VMs in question -> backup and restore them at new server.
    Kind regards, Leonardo.

  • How can i migrate my software from a macbook pro to a mini server

    So i have bought a new Mac Mini Server but now i want to migrate my MacBook Pro User Profile, Data Files and Software to it. yet it would appear that there is no migration agent to use which implies that Apple miss an important part of the Mac experience.
    So if any body out there has a solution i would welcome your input. i had thought about using the push option from the MacBook Pro migration Agent but not sure if that would work.
    Charles

    Well OK you can not use the migration assistant because there isn't one for SL Server and it looks that if you want to migrate from a MBP to server as a user you have 2  choices manually move the item you want to an identical user on the server or create the user and bild the software and move the data required.
    how ever i have had a result in using the 2nd drive for just SL, when I spoke to the tech at the apple store yesterday he said use a retail copy of OSX SL which wont boot but apply update 10.6.8 combo and the system will then boot and bingo you will have a dual boot machine. "Ho No you Won't" firstly once you run the install from the CD which has to be triggered from Server the machine will reboot after copying the packages to the new drive but does not run them to build the SL system so you have nothing to install the update onto hence doesn't work.
    Here's the suprise I had a copy of my MBP on a spare hdd produced by Carbon Copy, so I attached this the a FireWire case to the mini held the alt key down and powered up. much to my suprise the mini booted into the external drive hold my MBP copy of SL. from then on in it was just a case of copying the drive using carbon copy to the 2nd drive on the mini and hey presto reboot and i now have both server and  and non server mini in one box.
    Sometimes you just get Lucky.

  • Server 2008 R2 Standard - Netlogon Service fails to start with error code 31 a device attached to the system is not functioning

    Device manager does not show any signs of failed hardware
    Server used to be the only domain controller in the network 
    We had a power failure that resulted in the machine powering off incorrectly (3 months ago or so)
    Windows would not start for a missing file
    Followed a guide to resolve and we were able to get into windows 
    Since then the OS has not seemed to work correctly 
    Server was demoted and AD moved to another server 
    I am now not able to assign permissions to folders to domain users because this machine does not see the domain 
    We still use this server as a file server

    I believe that your system is facing some corruptions.
    The easiest way to proceed would be to migrate the server content to another location, re-install it and migrate them back.
    Otherwise, you can try running chkdsk /r /f and sfc /scannow
    and see if this helps.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Migrate SBS Server 2008 with Exchange 2007 to Exchange 2013

    I have looked at the documentation to co exist 2007 and 2013.  However I am concerned as it talks about changing the dns name to something like legacy, as the dns name that is used for outlook to connect is the name of the server.  So here
    is my question.  Would I have to change the name of the actual server itself?  and if I choose not to, and use a new name for the 2013 server, such as mail, would the users that get migrated, would they automatically update the
    name change?  Also note the SBS server with exchange 2007 is also their file server at present but will be changing.    

    Hi ,
    Thank you for posting your question in the forum.
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
    Thank you for your understanding and support.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback
    on our support quality, please send your feedback here.
    Andy Qi
    TechNet Community Support

  • Hyper-V Server 2012 Migration Questions

    Hello All,
    This is my first post here, but I have used these forums many times for information. Sorry in advance for the long post.
    I have a few questions regarding migration to Hyper-V server 2012 for my production environment. I have done quite a bit of reading, but I have a few direct questions and I would like to get some direct answers.
    My current production environment consists of one PowerEdge 2900 with 2 Xeon X5460 Quad Core 3.16GHz CPUs, 24 GB of RAM and a RAID 10 consisting of 8, 500 GB HDDs for a total of 2TB of storage. I am currently running Server 2008 R2 Enterprise w/ GUI as the
    Hyper-V host OS. I have 4 virtual machines all also running Server 2008 R2 Enterprise. The 4 virtual machines consist of 1 domain controller, 1 Exchange Server with Exchange 2010 Standard, 1 Server running SharePoint 2010 Enterprise and the remaining server
    running IIS with FTP and HTTP.
    The network topology is as follows….
    Hopefully it is clear from my diagram that the Hyper-V host OS is connected to the same physical network as the domain, but is not a joined to the domain. I set it up this way because I had concerns about connectivity and manageability because the domain
    controller is a guest VM. Also, the IIS server is on a completely different physical network independent of the domain.
    What I would like to accomplish is the migration of the above environment to Hyper-V Server 2012 as is. I want to keep my existing guest VMs unchanged and running Server 2008 R2 for now as well as keep the existing network topology intact.
    I have 3 additional servers in a separate test environment that would be able to serve as temporary storage or whatever is needed for the migration process.
    Here are the two main things I would like to accomplish with this migration…
    1. Make the transition from Server 2008 R2 to Hyper-V Server 2012 as a host OS.
    2. Migrate virtual hard disks from .VHD to the new .VHDX format.
    All that being said, I have finally come to my questions regarding this process.
    First and foremost, I would obviously need to back up my current setup in case something goes horribly wrong during the migration. My question regarding the initial backup is would it be better to do a bare metal backup of the Hyper-V host or should I do
    individual backups (bare-metal?) of the Guest VMs from within their operating systems?
    Second, since I plan to use Hyper-V Server 2012, I will have to manage the host OS using the RSAT from a domain joined client running Windows 7 Professional. How much of a pain is it going to be to setup RSAT and manage the non-domain joined host from a
    domain joined client? Is there a better way without using SCVMM or using Server 2012 w/ a GUI as the host OS?
    Third, are there any concerns I should have, precautions I should take or procedures I need to do before, during or after the migration regarding the existing VMs and the new virtualized hardware environment on the same physical host?
    Forth, should I use the trial version of SCVMM 2012 SP1 (or another previous version) to perform the migration? What should I be aware of using SCVMM for the migration and then discontinuing its use after the migration is complete and moving to management
    using the RSAT?
    Fifth, if I don’t use SCVMM for the migration, what is the best procedure for moving the VMs? Should I just copy the VHDs to a temporary storage location, install Hyper-V server 2012, copy the VHDs back, create new VMs and attach the VHDs or should I use
    the export/import process?
    Number six, when is the best time to migrate the VHDs to VHDX format and what would be the best method?
    And finally, do I need to worry about USN rollback with a single domain controller? From my reading, this seems to be a point of disagreement. Some people say it could happen while others say it won’t. Is there any point during the migration process where
    it could occur either during the copying of VHDs or from the switch to VHDX?
    Again, sorry for the long post and thanks for staying with me this far. Any information would be much appreciated

    1) As Jens said below with Windows Server 2012 you can simple copy the configuration files and VHDs from a 2008 R2 server to a 2012 server and import them - they one caveat to this is that any vlan configuration is lost and you have to simply re-create it. 
    Optionally you can also export the virtual machines from Windows Server 2008 R2 and then import them on Windows Server 2012.
    2) Remote management in a workgroup does have some caveat's associated with it - take a look at
    http://blogs.technet.com/b/jhoward/archive/2009/08/07/hvremote-refresh.aspx.  Generally I would recommend joining the Hyper-V management operating system to the domain - not just because of these issues but for a number of other features to work properly
    (see below)
    3) I always recommend validating the hardware and environment after the installation before migrating critical workloads to it - testing networking, backup etc... to make sure they function as expected.  Also ensure that you upgrade the integration
    components in the VM's after the migration.
    4) That is an option - though you might find you like SCVMM
    5) Recreating VM's using existing VHD's has some issues for example the BIOS GUID changes, all of the NIC's are re-plug and played etc... When possible copying the configuration or using export is much better.
    6) The sooner the better - VHDx has a number of significant advantages, you can do the migration using the Hyper-V manager UI (edit disk) or via powershell with Convert-VHD.  Do keep in mind that during the conversation you need 2x the space (for the
    original and the new VHDx).
    7) In the past you could get into trouble if you for example snapshotted an AD virtual machine and than reverted it - taking one offline and then brining it back online was never a problem.  In Windows Server 2012 we addressed this with a feature called
    generation ID's.
    Domain considerations...  A few things to keep in mind regarding the choice to not domain join the Hyper-V server.
    - You can't live migrate virtual machines
    - You can't utilize Hyper-V over SMB
    - Management is more difficult and less secure
    -Taylor Brown -Program Manager, Hyper-V -http://blogs.msdn.com/taylorb

  • Error in EJB running on WebSphere Application Server v6

    Hi,
    I am getting the following exception when a transaction ends in
    Stateless Session EJB:
    [8/4/05 13:04:00:396 CDT] 0000004d LocalTranCoor W   WLTC0033W: Resource
    imssDS rolled back in cleanup of LocalTransactionContainment.
    [8/4/05 13:04:00:406 CDT] 0000004d LocalTranCoor W   WLTC0032W: One or more
    local transaction resources were rolled back during the cleanup of a
    LocalTransactionContainment.
    [8/4/05 13:04:00:456 CDT] 0000004d SystemOut     O Error en el servlet:
    CORBA TRANSACTION_ROLLEDBACK 0x0 No; nested exception is:
    org.omg.CORBA.TRANSACTION_ROLLEDBACK:
    javax.transaction.TransactionRolledbackException:  ; nested exception is:
    com.ibm.websphere.csi.CSITransactionRolledbackException:   vmcid: 0x0
    minor code: 0  completed: No
    [8/4/05 13:04:00:456 CDT] 0000004d SystemOut     O terminaTransaccion().
    Rollback
    [8/4/05 13:04:00:456 CDT] 0000004d SystemOut     O
    javax.servlet.ServletException: CORBA TRANSACTION_ROLLEDBACK 0x0 No; nested
    exception is:
    org.omg.CORBA.TRANSACTION_ROLLEDBACK:
    javax.transaction.TransactionRolledbackException:  ; nested exception is:
    com.ibm.websphere.csi.CSITransactionRolledbackException:   vmcid: 0x0
    minor code: 0  completed: No
    at HClinicaPPServlet.service(HClinicaPPServlet.java:597)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at
    com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1
    212)
    at
    com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.
    java:629)
    at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837)
    at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220)
    at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204)
    at
    com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681)
    at
    com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(Ht
    tpInboundLink.java:421)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(Ht
    tpInboundLink.java:367)
    at
    com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.j
    ava:276)
    at
    com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscrimin
    aters(NewConnectionInitialReadCallback.java:201)
    at
    com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewCon
    nectionInitialReadCallback.java:103)
    at
    com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManage
    r.java:548)
    at
    com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java
    (Compiled Code))
    at
    com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java
    :934)
    at
    com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.jav
    a:1021)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)The EJB is being invoked from a servlet. The servlet calls three methods
    from the EJB, the first one initializes a database connection, the second
    one executes a query against a SQL Server database and the third method
    closes the connection. The exception occurs while calling the third method.
    The EJB was working fine in WebSphere Application Server 4.0, but we are
    helping this customer migrate to WebSphere Application Server 6, but this
    error arised.
    The EJB is defined as follows in the ejb-jar.xml deployment descriptor:
      <session id="HistClinicaPP">
       <ejb-name>HistClinicaPPEJB</ejb-name>
       <home>HistoriaClinica.HistClinicaPPHome</home>
       <remote>HistoriaClinica.HistClinicaPP</remote>
       <ejb-class>HistoriaClinica.HistClinicaPPBean</ejb-class>
       <session-type>Stateless</session-type>
       <transaction-type>Bean</transaction-type>
       <resource-ref id="ResourceRef_1123110667486">
        <description>
        </description>
        <res-ref-name>imssDS</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Application</res-auth>
        <res-sharing-scope>Shareable</res-sharing-scope>
       </resource-ref>
      </session>The ibm-ejb-jar-ext.xmi files contains the following:
      <ejbExtensions xmi:type="ejbext:SessionExtension"
    xmi:id="SessionExtension_1123174793374">
        <enterpriseBean xmi:type="ejb:Session"
    href="META-INF/ejb-jar.xml#HistClinicaPP"/>
        <beanCache xmi:id="BeanCache_1123175678367" activateAt="ONCE"/>
        <internationalization xmi:id="BeanInternationalization_1123175807173"
    invocationLocale="CALLER"/>
        <localTransaction xmi:id="LocalTransaction_1123174793374"
    boundary="BeanMethod" resolver="Application" unresolvedAction="Rollback"/>
      </ejbExtensions>I tried copying the configuration from WAS 4.0, the only piece of the 4.0.x
    descriptor missing in the ext file is <structure>, since I couldn't find a
    matching property in Rational Application Developer 6.0 for WAS 6.0. This is
    what the ibm-ejb-jar-ext.xmi in WAS 4.0 contains for this bean:
      <ejbExtensions xmi:type="ejbext:SessionExtension"
    xmi:id="SessionExtension_17" timeout="600">
        <enterpriseBean xmi:type="ejb:Session"
    href="META-INF/ejb-jar.xml#Session_9"/>
        <structure xmi:id="BeanStructure_17" inheritenceRoot="false"/>
        <beanCache xmi:id="BeanCache_17" activateAt="ONCE"/>
        <internationalization xmi:id="BeanInternationalization_17"
    invocationLocale="CALLER"/>
        <localTran xmi:id="LocalTran_17" boundary="BEAN_METHOD"
    unresolvedAction="ROLLBACK"/>
      </ejbExtensions>I am not an expert in EJBs, so I don't know how to correct this problem, any
    help would be appreciated.
    Thanks in advance,
    Jorge Gomez

    Hi,
    According to WAS 6 , every opened connection has to be commited (or rolledback) explicitly (didnt try autocommit) before closing. Even if all you have done with that connection is a SELECT Query.
    This has apparently solved the same problem I was getting. implement it and see whether it helps you.

Maybe you are looking for