OS X Upgrade DVD not recognized

I just put XP on my old MacBook. Everything went OK, except when I put in my 10.5 DVD it doesn't get recognized by Windows! Is this possibly because it's an "Upgrade" DVD? The original system software DVD that came with the MacBook is 10.4.6., and XP doesn't recognize that, either. So I don't have any way to install the necessary drivers....

Do you have your old hard drive with Lion and does it still function properly so that if you were to reinstall it in you MBP you would be back to square one?
If so I suggest this: Put back your old hard drive and open DISK UTILITY app (in the utilities folder).
Erase the new hard drive and format it to Mac OS Extended (Journaled)
Go to "restore" and from the left side bar drag the old hard drive to the SOURCE window and the new hard drive to the DESTINATION window. Click the restore button and go to lunch. The more data you have the longer it will take (could be 2-3 hours). Use a firewire if you have it or an esata wire even is even faster. These will speed up the data transferr.
After this has been completed, swap the drives and you should be in business. My experience has been that the first boot takes longer than what you are used to.
CAVEAT: I have done this several times with no problems, but never with Lion. If you try this and fail I suspect there is some aspect with LIon that prohibits the transferr but I'll be bold and wager this will not be the case.
Caio.

Similar Messages

[CLOSED] CD/DVDs not recognized (hal-less KDE)

Hello everyone,
after the last system upgrade last week CDs and DVDs are not recognized when I insert them in the drive.
I'm running hal-less KDE 4.6 with udisks installed.
I removed hal after the upgrade, however the drive could not recognize the disks even when hal was running.
I searched the forum but haven't found any discussion reporting the very same problem.
Can anyone help me to debug this?
Thanks!
Last edited by elnigno (2011-02-22 12:43:43)

I had the same / similar problem. Just that given that I build my own kernel I thought this was what was causing it. That's why I rebuilded the kernel and enabled ISO and UDF modules in Filesystems. If you're using the standard kernel I have no idea what could be the problem.

Empty CD or DVD not recognized

Hi all
After weeks of burning CDs or DVDs without any problems I suddenly get these errors and I cannot burn anymore:
a.) If I load a CD-R I get from the Finder the message "Dieses Medium kann nicht verwendet werden, da es nicht erkannt wird." in english something like "Media cannot used because not recognized ..."
b.) Same message when loading a DVD-R
c.) If I load a CD-R I get from iTunes the message "Der Brenner wird gerade von einem anderen Programm verwendet." what means in english something like "Burner is used by another program ..."
The optical drive can read bought CD (Music) and DVD (Movie) without any problems. So iTunes or DVD-Player can play them without problems.
I'm not sure but could it be there was a bad software update? I remember some days/weeks ago I got a quite huge software update from apple related to the OS, iTunes a.s.o.
In other posts I've read that people had to exchange their optical drives but I don't think this is the problem here because reading runs without any errors.
Thanks for any support.

Some entries in system profiler:
ATA-Bus:
MATSHITADVD-R UJ-85J:
Modell: MATSHITADVD-R UJ-85J
Version: FAV1
Seriennummer:
Absteckbares Laufwerk: Nein
Protokoll: ATAPI
Einheiten-Nummer: 0
Socket-Typ: Intern
Los Power Polling: Ja
MATSHITA DVD-R UJ-85J:
Firmware-Version: FAV1
Verbindungstyp: ATAPI
Brennen möglich: Ja (Geliefert/Unterstützt von Apple)
Cache: 2048 KB
DVD lesen: Ja
Beschreibbare CD: -R, -RW
Beschreibbare DVD: -R, -RW, +R, +RW, +R DL
Schutz vor Pufferunterschreitung beim Brennen von CDs: Ja
Schutz vor Pufferunterschreitung beim Brennen von DVDs: Ja
Schreibstrategien: CD-TAO, CD-SAO, DVD-DAO
Medien: Nein
IOCDStorageFamily:
Version: 1.4
Zuletzt geändert: 29.09.06 06:19
Informationen: 1.4, Copyright © 1998-2005 Apple Computer Inc., All Rights Reserved
Ort: /System/Library/Extensions/IOCDStorageFamily.kext
kext-Version: 1.4
Lade-Adresse: 0x92a000
Gültig: Ja
Identifiziert: Ja
Abhängigkeiten: Erfüllt
Integrität: Korrekt
CDs & DVDs:
Version: 1.4
Unterstützt von: Apple
Sichtbar: Ja
ID: com.apple.preference.digihub.discs
Ort: /System/Library/PreferencePanes/DigiHubDiscs.prefPane

APE12, burned dvds not recognized, bd-r media does not recognized

I have a problem with burning with my PE12, I have a win7 64 bit PC, with following
BD Burner: HL-DT-ST BD-RE BH16NS40 from LG
BD-ROM: iHOS104
Problem 1:
=========
All DVDs I burned with PE12 are not recognized on my HiFi BD-Player, ONKYO-BD-SP809
the same DVD is NOT recognized on the BD-ROM in the same PC
the DVD is RECOGNIZED on the burner (see above) in the same PC
Media is 8x DVD-R, and ONYKO and BD-ROM of course supports this type of media and I used the same medias in the past (Verbatim)
Problem 2:
========
I thought, ok, so I burn a BD, I have BD-R media, which worked fine with pinnacle ...
I made a sample project (1min length) and try to burn it, but the burn menu shows the right device (F: in my case and the right name), but it tells me Status: there is no media inside! Allthough the media is inside the BD-Burner.
I am getting mad about it ... anybody can help me out?
P.S:
Burner, BD-ROM, ONKYO and PE are updated to the newest firmare/versions.
Best regards top the community

iqpower
Thanks for the follow ups.
Premiere Elements 12 DVD-VIDEO on DVD disc that will not play back on the ONKYO player....
If you take the VIDEO_TS Folder from the DVD disc that will not playback as DVD-VIDEO on DVD in your player and look inside it, do you find a file named VTS_01_1.VOB or possibily VTS_02_1.VOB? If so, can you play that file back on one of your computer players? These are video files.
Can you take the Premiere Elements 12 DVD-VIDEO on DVD disc and play it back on the computer with Windows Media Player or VLC player?
Delete the Adobe Premiere Elements Prefs file.
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. It should be generated again after you open a new project. Work with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited. The try another burn to DVD, followed by play back on players of interest.
Any progress up this point? If no....
Premiere Elements 12 - Blu-ray disc not being recogized by Premiere Elements 12 burn dialog Status.
This one we will save for the next step. Next step, I am suggesting a
a. Deactivate the program from an opened project Help Menu/Sign Out
b. Uninstall (Control Panel route)
c. ccleaner run through (regular and registry cleaner parts)
https://www.piriform.com/ccleaner
d. reinstall with antivirus and wirewalls turned Off
We will be watching for your results.
Thanks.
ATR

DVD--not recognized AND stuck in drive

I've had trouble with my G4 not recognizing DVDs. I just put one in that was burned at a store with a friend's videotape--it never showed up in the finder. When I launch Disk Utility, it hangs. I am using an older keyboard without the disk eject button; I can't get the disk to eject, can't drag it to the trash because it doesn't show up. When I reboot with the mouse button held down, the Mac won't start up--I just get a Windows-like gray screen of death.
I don't know what the drive is--it's an old Super Drive--because the Apple System Profiler also hangs when I click on the "Disc Burning" option.
How do I get the DVD out, and how do I get the G4 to recognize DVDs?
Thanks for any help--Bob

Hi-
Try and open the tower drive cover, and look for a small hole about the size of a paper clip, in the front of the dvd drive. Insert a straightened paper clip in the hole, and you should be able to open the tray.
You should then try your Tiger install disc. (While you're at it, boot from the install disk, and run Disk Utility to repair your hard drive).
If the install disk is read, then the drive is probably okay.
You may consider an "Archive and Install" reinstall of your OS X.
Prior to that, you may consider a reinstall of the OS 10.4.8 combo update:
http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
Please post back with progress (or not).

CS6 Design Standard upgrade serial not recognized

I just recently purchased upgrades for three Adobe CS5 Design Standard to CS6 Design Standard and when I try to apply the upgrade serials it says the serials are not recognized as valid. I downloaded CS6 from the link in my order, installed, and tried to apply the license and it will not work. Is there something that I'm missing in the process?

Contact support.
Mylenium

Burn imovie to dvd-"not recognized"

I spent 5 days and about 26 hours making this iMovie. I bought the **** DVD's to burn it on to 42 of them for work. I finalized the project numerous times, did the "Media Browser" thing and chose the file sizes. I insert the DVD to burn, and it claims that it is "not recognized" in order to burn it. I am beyond frustrated and NO, Apple, I will not give you any more of my money. Helllllllpppp!!!

When you insert the Blank DVD in the finder with nothing else open.
Does the finder recognise the Mounted Blank DVD?
IF it does try burning a small file onto the blank DVD through the Finder.
If it fails what is the error that the Finder tells you?
If this works then proceed
Use a Free App like Burn http://burn-osx.sourceforge.net/Pages/English/home.html
Drag and drop your movie files then click Burn. Job Done. 
Alternative
you should be able to burn using iDVD.

Dvd not recognized-error code 19-contact manufacturer.

My dvd is not recognized. I tried going to device mgr. and uninstall and then use action to get it reinstalled but I got a failed notice and said to go to manufacturer. What do I do now. Of course it is not in waranteee.
Also, on a lot of sites I try and go to all I get is squares and letters that don't make any sense. I would just like my DVD to work. I have hardly used it. Since this is an all in one it isn't like I can just pull it out.

Please use the following fix first:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
then the following fix if required:
http://www.ehow.com/how_4693117_dvd-device-manager-error-codes.html
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Ox upgrade / itunes not recognizing ipod/iphone

Just updated to ox 10.6.7 and neither my 4th gen ipod or 3g iphone are being picked by itunes. Can someone give me some pointers to resolve this? They are charging but not recognized by itunes. Thanks.

see Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart.
also here: iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X .

External DVD Not Recognized

I have a Sony DWQ28A Dual Layer DVD burner that I have put up as an external drive attaching to a Firewire hub. Tne Mini does not recognize the burner at all. I have tried Disk Utility and there is no drive showing.
I have heard that Patchburn may be a fix but I have also heard that it works and then it doesn't. I have also seen that Toast Lite 6 should be used with this burner in Mac 10.X environments but I am hesitant to go there when the burner is not being recognized at all.
I would rather ask questions beofre I start downlaoding stuff that is not going to do the job.
Any thoughts?

I just got a reply from tech support at Sony concerning my problems with my DRX530UL burner (external DVD burner did not respond properly). They say that it is not supported for Mac at all.
They listed two drives that are supported for 10.2 and up: the DRX720UL/T and the DRX710UL/T. Note: the /T means Mac compatible! The drives with the same model numbers and no /T are NOT Mac compatible!
The 710 has a slower sustained and burst data rate, (16MB/s vs 21, and 66mbps vs 480mbs), and the 720 comes with Nero and Toast Lite.
Both drives do DVD-R/-RW, DVDR/+RW/+RDL/RWDL, etc etc.
My burner is several years old, and at $180usd, I can afford to upgrade to DL support.
I guess the moral of the story is that if Sony doesn't say it's Mac-compatible, it's pot luck.

CD/DVD not recognized when booted in OS 9

Hi,
I have a PB G4 667 titanium (the gigabite ethernet model) that can boot into OS 9. I normally run OS 10.4.5. I recently re-installed OS 9.2.2 using a generic install disk (not the one that came with this specific model). It boots fine into OS 9, but it will not recognize CD's or DVD's or some extensions, like Apple DVD player (which says it is missing a .lib file.
I also had a new upgraded SuperDrive (MCE Technologies) before I had to re-install OS 9. I didn't try to run OS 9 and see if the drive worked after it was installed, so I don't know if that might be the problem. I tried to load the driver into the extension folder, but there was no folder called "Supporting Authoring files" like the read me text said there should be for OS 9.
Any suggestions as to how to get OS 9 to recognize my CD/DVD's?
PB G4 Ti 667 Gig-Ethernet Mac OS X (10.4.5) I boot into OS 9 on occasion
PB G4 Ti 667 Gig-Ethernet Mac OS X (10.4.5) I boot into OS 9 on occasion

HI, marbot61. It sounds to me as though the problem is not that discs aren't recognized, but that your drive itself is not supported by your OS 9 installation — and perhaps it isn't supported in OS 9, period. Call MCE and ask for help setting OS 9 up to support the drive.
If you used a model-specific OS 9 installer disk that came with some other Mac, rather than a retail OS 9.2.1 disc (white, with a big gold 9 on its label) or the installer disk that originally came with your Powerbook, that may be the problem. It may be essential for you to use the disk that was shipped with the Tibook to install OS 9 on it. You should never expect to get a functional OS 9 installation from an installer disk that is specific to any model other than the one you're installing it on, and MCE will be justified in telling you they can't support your drive until you have a proper OS 9 installation on the Powerbook.

Dvd not recognized

I have a Mac Book Pro 15 inch mid 2009 and dvd's are no longer recognized.
What is my problem and can it be fixed? OS 10.9.3

apele, welcome to the discussions.
As far as I know your Optical Drive will not handle DVD+ MEDIA at all.
You may even have trouble with some of the higher speed media as well.
I think if you check, and be sure to read the packaging.
I have been using Maxell DVD-R that boasts 1X-16X and will burn on your Drive.
Cheers Don

Data dvd not recognized

Hi
Wonder if anyone can help...
I have recently had a show-reel put together and they have sent me a copy on a data dvd with AVI and MOV files on it. This is so I can burn it and upload it to websites etc.
When I load the disk it doesn't seem to be recognized. There is no icon on the desk top but The iDVD application does automatically open up though, however I can't find the files anywhere.
I have looked in disk utilities and the disk is listed but it wont let me verify it.
Does anyone have any ideas about why this might be and what I can do it about it.
I want to try and burn a couple of copies so any help would be great.
Thanks

Thanks for confirming that Import is correct.
When you say the Capture Scratch folders only hold captured material, does that include Imported material? And if so, when I look in the Capture Scratch folder and see not QT files (as I have seen in the handful of previous projects I have attempted) but small "FCE document files" then I do have some kind of problem, right? I'm just trying to figure out where to start in understanding this, and it seemed to me the external hard drive source was the new variable here; that maybe there was something I had missed in terms of what was required when using the XHD as a source instead of my own camera capture. If that is not the case-- that is, if a QT file is the same whether brought to the system through Capture or found on an HD and imported-- then I have to figure out what I did to screw up the Capture Scratch function. I have not done any render effects. I'm just setting up. I've not done much of this and none at all recently, so operator error is certainly possible. I'll reproduce the export and see if I can refine the settings. Thanks for your patience and thoughtful assistance.

HT201272 in-app upgrade purchase not recognized?

i purchased an in-app upgrade for quickoffice for my iphone. i had to reset my phone and when i used my icloud to put everything back on my iphone it showed me as not having purchased the upgrade. since quickoffice lite is no longer available, the only option is quickoffice pro. which i had previously purchased in an in-app upgrade. apparently my account recognized taking my money but not having uograded it. yes when i purchased the upgrade, i was able to use the features in quickoffice pro, but my device still recognized it as quickoffice lite(which is no longer available). in conclusuion, What the F?

If you haven't received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

DVDs not recognized

On my MacBook Pro the DVD superdrive suddenly stopped recognizing DVD disks. They never show up in the Finder and are ejected after about 30 seconds. CDs mount fine, even DVD burning works fine.
I already tried resetting the SMC and PRAM. Nothing helped.
Does anybody have any ideas what else to try?
Thanks a lot!
The DVD drive is a Matshita DVD-R UJ-857, Revision HAEA

I have had exactly the same issue Powerbook G4 1.67 was burning several disks to day then all of a sudden the mac would not recognise a disk to burn, they are bog standard TDK DVD-R disks. so I have tried all the usual of running updates have updated to 10.5.2, installed the graphics card update and still no luck. There does not appear to be any reference from Apple to this problem so not at all sure what to do next.
Have reset power management
Have reset PRam
Have rebuilt permissions
not much else I can think of doing to fix it

OS X Upgrade DVD not recognized

Similar Messages

Maybe you are looking for