Decimal places in report painter

Hi experts. I have a financial report written in report painter. I want to show two decimal places on a single row. The rest of the report is in whole dollars, but this one row is a percentage, so I want to show decimal places. I know that you can format an entire column, but I can't figure out how to format a single row. Can anyone help?
Thanks
Janet

YES U CAN
SAME AS ABOVE PROCEDURE
BUT SELECT ROW INSTEAD OF COLUMN
Edited by: Anil Kumar Potnuru on Feb 10, 2009 9:02 PM

Similar Messages

How to increase no. of decimal places in a cube

Dear Friends
Can you tell me
how to increase no. of decimal places in a cube
i want 5.98765 this value in the keyfigure
but it is allowing me only 5.987 only 3 digits after decimal
urgent
Thx

Hi Laxmi,
Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
Or
You can change the data type from DEC to FLTP,by which you can store data upto 15 decimal places in the cube.
Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
Hope it helps....
Regards,
Umesh.

No of Decimal Places in Write Back

Hi All,
We are using ERPi/FDMEE writeback option to write data back to Oracle EBS12. Everything is working correctly, but while extracting data from Hyperion FDMEE is taking data in 7-8 decimal places. Is there any way to round this to 2 decimal places while exporting data ?

Hi Laxmi,
Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
Or
You can change the data type from DEC to FLTP,by which you can store data upto 15 decimal places in the cube.
Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
Hope it helps....
Regards,
Umesh.

Report Painter selection screen field modfication?

Hi Buddies,
I want to modify the report painter selection screen.
There is one field manadatory on the selection screen . I want to make it as optional.
Please let me know if any one knows.
Waiting for your response..
Regards,
Vijay

Hello sir,
Some one did the code. Now iam modifying this report painter selection screen.
I would like to know where the field definition will take place in report painter.
Regards,
Vijnay

Report Painter : Local currency is having decimal points for chile

Hi Friends,
I have a report painter in which the amount for the the countries which are not having the decimal places
like chile and Japan are displying with the decimal places, when i changed the base key figure as the transaction currency instead of the local currency then no data is coming.
If someone have some good ideas which can resolve this issue please suggest me.
Thanks & Regards
Digvijay

Hi Yogesh,
Thank you for ur reply.
in the report, i have 10 keyfigures. 4 are being picked up from the report and they have currency translation variable. The rest 6 are formulas. On these formulae, i restricted the decimal display to "nothing defined". it works fine for all the 6 formulae. for WON it does NOT show decimals and for the rest of the currencies, it shows decimals.
but how this can be achieved on the 4 direct keyfigures??
Rgds.,
ASha

Key figure, number of decimal places are not showing in report output

Dear experts,
At cube level PO qty value is getting 0.010 where as in bex report output of PO qty showing as 0. I have chosen decimal places as 0.000 in key figure additional properties tab. In query designer also I have chosen no of decimal places as 0.000 in display propertiesu2026please help me out. How can I get 0.010 value in report o/p.
Thanks in advance.
Srivalli.

Hi,
Try to run the query in RSRT. CHeck if you are getting the same output. Also make sure that in the reports all the filters are same as you have applied in the info -cube to see the data.
- Jaimin

Number with more than 10 decimal places display as 0 in report

We have a number stored on a table as this long with several decimal values.
2440.159999999999854480847716331481933593
On one PC it display in a Crystal report as 0 and to another user it displays at the 2440. The report formats the display field with 0 decimal places.
Is there a max precision setting at the database level that is causing this?
It seems I can add an SQL express as follows:
Round ("ORDER_RELEASE"."TOTAL_WEIGHT", 2) to resolve the issue but cannot determine could be causing the differences in display among two different client PCs running the same report.

Hello,
CR was built using C++ and therefore the max number is 15 digits plus 1 for the sign of the number.
Cause could be different runtime of MS C++ but hard to say for sure. I any event the only work around is to use Store Procedure and break the field into 2 parts. The in CR add a text object and drop the fields into it next to each other. For doing any calculations on them you'll also have to do that in the SP or handle each field manually.
Thank you
Don

Increase XL Reporter's Decimal Places to more than 2

Hi All,
Can anyone advise on how to increase the default decimal places in XL reporter to be more than 2?
The figures i retrieved from SAP Financial Template for the stock account is 1234567.81 but XL report shows it as 1234566.76.
Does showing a differences of 0.05 value.
I did a sum for the stock account from JDT1 using query. it is also showing me 1234567.81.
So, I am assuming that XL reporter is using 2 decimal places by default.
Please help my balance sheet is not balance.
Regards
Jessie

I found that there is a SAP Note written to increase the decimal in SAP XL Reporter.
See SAP Note 896207.

Download reported data in Tunisian currency (three decimal places)

Dear all,
if I use the download of reported data functionalety in EC-CS (TC cx3d1) and the file format is .txt, the system can not handle the three decimal places of tunesian currency and moves the comma one digit to the left side. The values are multiplied with 10 right now.
Do I need to change the settings somewhere or is that a known problem?
Many thanks in advance,
Andrea Reinecke

Hello,
many thanks for the quick answer. Maybe I need to specify the problem a little bit: The Tunisian currency has been set to three decimal places. The databaselist shows the values correctly, e.g. 5000,000.
If I use transaction cx3d1 to download the values, the system converts this value into a textfile. The problem is, that the values is not 5000,00 any longer, instead of 50000. That means, everything is multiplied with 10 and the decimal places are away.
Do you know that problem? We have it only with the tunisian dinar, but not with the Hungarian currency, which has as well three decimal places.
Best regards and many thanks in advance,
Andrea Reinecke

Need to trim decimal Places in data pulled in Financial report

Hi All,
We have a Financial report in which in partcular column, data is being pulled by the formula :
<<CellText("Grid1", Cur, C(A), 1)>>
Some cells in that column contains only text comments, some cells having numbers only.
Issue is with the numbers. Numbers when pulled in FR are being dispalyed upto 6 decimal places, i.e. 1234 is displayed as 1234.000000.
So if somebody can suggest how can we modify the formula so that we can display the numbers without decimal values. i means , numbers being pulled are displayed as 1234 only not like 1234.000000.
Thanks,
Satish

Hi there,
You can use the function Trunc(xxxxxxx, 0) where xxxx is your retrieved value which is considered as numeric.
However, if I were you, I would concentrate on how to resolve the issue with the smartview submission.
Regards,
Thanos
One Truth about...

XL REPORTER DECIMAL PLACES

Although may be selected for a Company 6 decimal places (e.g. prices, rates, amounts) XL returns only 2 decimal (in Report Builder and Report Composer). Is there a possibility to increase decimal places in XL? Rounding makes serious differences in results.

Please refer SAP note no. 896207
The following is the content of the note.
You have to edit the registry to change this. Do the following:
1. Go to Start->Run in Windows and enter "Regedit".
2. Go to HKEY_Local_Machine\Software\iLytix\XLReporter\Settings and add new string value (Right-click and choose New->String Value) and enter "FloatDecimals".
3. Press Enter and double-click to enter the decired number of decimals.
Note: This will only affect figures in the Report Designer, and not Report Composer.
Incorrectly editing the registry may damage your system. System registry changes should therefore only be performed by an advanced user who is prepared to both edit and restore the registry. For details about the system registry, please refer to Microsoft Registry Editors help system.
Kindly provide Points if this has resolved your query.
Regards:
Vivek

Amount has moved one decimal place in the report

Hi,
I am looking in to a report at present, Transaction amount has moved one decimal place, while the local amount stays the same. Any one could tell me the possible reason for this?
Thanks in advance
RN

Hi,
Check this link,
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/key-figure-in-cube-is-multiplied-by-100-when-displayed-in-bex-report-743076
same issue find in this.
Hope it will help you.
Thanks,
Hema

OBIEE - edit report entities like title, column name, decimal places

Hi all,
How do I edit OBIEE report entities like title, column name, decimal places?
I know I can edit column name in repository, but I hope I can do it also at report level.
As you can see, year looks like "2012.00", I don't need these zeros after "2012", how do I edit it?

Using Criteria tab
Column Properties->Data Format->Override Default Data Format
You may go for Save button to make it catalog level for that column
Edited by: Srini VEERAVALLI on Dec 7, 2012 10:57 AM

Decimal Places is not showing in Qty field in COPA report

Hi,
I have made a COPA report using one form that I have made it through TC:KE34.
I have used ABSMG for Sales qty in my report.
What I am observing in report, the qty is not showing the decimal places for exmaple 6.032 MT but it gets round over to 6 MT.
I want the system should show the 3 decimal places for the Sales Qty.
How to do resolve this.
Regards
Kami

Hi Ajay,
No this is somthing new you mentioned. I havent tried to change the number format after executing the report.
Please let me know how to do that. I am using Object ALV to display the report and I am not getting any option in the menus to change the number format.
Also I noticed one thing, In other output format like drill down report its coming correctly , only in Object ALV output format its showing the rounded values.
Please let me know the path.
Regards
Kami

Percentage calculation in report painter

Friends,
How do we calculate percentage in report painter. I know we can do it using a formula. But when i give the formula as ex: A/B it is giving it as Zero. Do i need to do anything else? A is a subtotal of some accounts and B is a subtotal is some accounts.
Thanks in Advance

Hi,
For decimal places
select the column
go to formatting--> columns
in decimal places put 0.00
This will give u decimals
Points if useful
Regards,
Kiran

Decimal places in report painter

Similar Messages

Maybe you are looking for