OSB 11g - SB transport using Soap1.2

Hi all
I am trying to build a proxy service after converting a wsdl from soap1.1 to soap1.2.
Problem: The proxy service was working fine with 4 operations, SB transport and soap1.1 , however as soon as I moved it to Soap1.2 the OperationalBranch is not behaving correctly i.e. the request is not routed to correct branch - and it always goes to the default branch.
Here are few things about the wsdl I have:
a) There are 4 operations in it so I am using OperationalBranch in my proxy service which is at the first node of my proxy service
b) The proxy is 'SB' transport based.
c) The selection algorithm for operation is SOAPAction Header.
Here is what i did to change the wsdl to soap1.2:
1. Added xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" at the wsdl:definitions at the top.
2. Added soapActionRequired="true" in the soap12:operation at wsdl:binding.
Regards
Jags

Similar Messages

OSB 11g - JCA transport

Hi,
I have just installed OSB 11g and it seems like JCA transport is not there in the Proxy/Business service - Transport tab.
I have checked OEPE plugins folder and JCA transport folder is empty.
Is this like my installation is not proper or I have to do some configuration for JCA?
I have tried creating a JCA db adapter using 10g Jdev and it didnt work, error message when creating business service is " WSDL contains a tranport not supported".
Please help.
Regards,
AP

Hi all,
I've followed the JCA DB Adapter with OSB tutorial at:
http://www.oracle.com/technology/sample_code/products/osb/index.html
I'm using OSB 11gR1 and JDeveloper 11gR1 11.1.1.3.0 Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
First, the JCA DB Adapter wsdl file generated by JDeveloper using the DB Adapter wizard doesn't carry binding and port information for the wsdl. I've configured a pool table adapter with the DB Adapter wizard.
So I've generated the JCA binding and port manually using the WSDL design view inside JDev.
Next when I try to create a proxy service within OSB, it says that: "The WSDL contains a binding not supported by OSB."
Has anyone faced this before? Hints appreciated...
Here's the WSDL:
<?binding.jca DatabaseInbound_db.jca?>
<wsdl:definitions name="DatabaseInbound" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/DBContent/DBProject/DatabaseInbound" xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/DBContent/DBProject/DatabaseInbound" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:top="http://xmlns.oracle.com/pcbpel/adapter/db/top/DatabaseInbound"
xmlns:jca="http://schemas.xmlsoap.org/wsdl/jca/"
xmlns:format="http://schemas.xmlsoap.org/wsdl/formatbinding/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<plt:partnerLinkType name="DatabaseInbound_plt">
<plt:role name="DatabaseInbound_role">
<plt:portType name="tns:DatabaseInbound_ptt"/>
</plt:role>
</plt:partnerLinkType>
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/top/DatabaseInbound" schemaLocation="xsd/DatabaseInbound_table.xsd"/>
</schema>
</wsdl:types>
<wsdl:message name="CustomerCollection_msg">
<wsdl:part name="CustomerCollection" element="top:CustomerCollection"/>
</wsdl:message>
<wsdl:portType name="DatabaseInbound_ptt">
<wsdl:operation name="receive">
<wsdl:input message="tns:CustomerCollection_msg"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:service name="DatabaseInbound">
<wsdl:port name="DatabaseInbound_pt"
binding="tns:DatabaseInbound_binding"/>
</wsdl:service>
<wsdl:binding name="DatabaseInbound_binding" type="tns:DatabaseInbound_ptt">
<jca:binding/>
<format:typeMapping encoding="Java" style="Java">
<format:typeMap typeName="top:CustomerCollection" formatType=""/>
</format:typeMapping>
<wsdl:operation name="receive">
<jca:operation methodName="receive" InteractionSpec=""/>
<wsdl:input>
<jca:header/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
</wsdl:definitions>

Is OSB 11g MQ Transport certified to use with MQ 7.0 client libraries?

Hi,
Could you please point me to the OSB MQ transport certification page? I would like to find out if I could copy MQ 7.0 client libraries to OSB\lib folder
Thank you

interesting question...
here http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/interop.htm#OSBAG1403
they say
IBM WebSphere MQ 5.3, 6.0, *7.0 server support with 6.x client libraries*
I vaguely remember having used the 6.0 jars to connect to MQ 7, but I believe that even using the 7.0 jars would work.... don't quote me on this...

OSB 11g - FTP Transport - Active or Passive connections?

Hi,
When we create a Proxy Service in OSB to use FTP transport, which type of connection OSB establishes with the server? Is it active FTP or passive FTP conecction?
Thanks,
Sanjay
Edited by: Sanjay Bharatiya on 20-Dec-2010 11:46 AM

OSB uses passive mode for proxy services and active mode for business services. There is a patch available which will make both proxy and business services to use passive mode. If you need the patch please open a Service Request in MyOracle Support and mention the support Note (860423.1)
Passive mode is desired if you want to open the firewall ports, if any, from OSB server to FTP server only and not other way from FTP Server to OSB server.

Need sample ALSB project migration to OSB 11g environment

Hi
I'm looking for sample ALSB project migration to OSB 11g environment and as well as steps to automate deployment of OSB 11g projects by using WLST
Can some one please help me out in regards to the same
Thanks
Ram.S

Please find the build.xml
<?xml version="1.0" encoding="windows-1252" ?>
<project name="ConfigExport">
<property file="./build.properties"/>
<property name="metadata.dir" value="${workspace.dir}/.metadata"/>
<property name="domain.export.script" value="export.py" />
<property name="domain.import.script" value="import.py" />
<path id="library.osb">
<fileset dir="${osb.home}/modules">
<include name="com.bea.common.configfwk_1.6.0.0.jar"/>
<include name="com.bea.core.xml.xmlbeans_2.2.0.0_2-5-1.jar"/>
</fileset>
<fileset dir="${weblogic.home}/server/lib">
<include name="weblogic.jar"/>
</fileset>
<fileset dir="${osb.home}/lib">
<include name="alsb.jar"/>
</fileset>
</path>
<taskdef name="wlst"
classpathref="library.osb"
classname="weblogic.ant.taskdefs.management.WLSTTask"/>
<target name="exportFromOSB">
<wlst fileName="${domain.export.script}" debug="true" failOnError="false" classpathref="library.osb"
arguments="${wls.username} ${wls.password} ${wls.server} ${export.project} ${export.jar} ${export.customFile}">
<script>
adminUser=sys.argv[1]
adminPassword=sys.argv[2]
adminUrl=sys.argv[3]
exportJar = sys.argv[5]
customFile = sys.argv[6]
passphrase = "osb"
project = sys.argv[4]
connect(adminUser,adminPassword,adminUrl)
domainRuntime()
</script>
</wlst>
</target>
<target name="importToOSB">
<wlst fileName="${domain.import.script}" debug="true" failOnError="false" classpathref="library.osb"
arguments="${wls.username} ${wls.password} ${wls.server} ${import.project} ${import.jar} ${import.customFile}">
<script>
adminUser=sys.argv[1]
adminPassword=sys.argv[2]
adminUrl=sys.argv[3]
passphrase = "osb"
project=sys.argv[4]
importJar=sys.argv[5]
customFile=sys.argv[6]
connect(adminUser,adminPassword,adminUrl)
domainRuntime()
</script>
</wlst>
</target>
<target name="exportFromWorkspace">

<java dir="${osb.home}/lib" classpathref="library.osb"
jar="${eclipse.home}/plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar"
fork="true" failonerror="true" maxmemory="768m">
<jvmarg line="-XX:MaxPermSize=256m"/>
<arg line="-data ${workspace.dir}"/>
<arg line="-application com.bea.alsb.core.ConfigExport"/>
<arg line="-configProject ${config.project}"/>
<arg line="-configJar ${config.jar}"/>
<arg line="-configSubProjects ${config.subprojects}"/>
<arg line="-includeDependencies ${config.includeDependencies}"/>
<sysproperty key="weblogic.home" value="${weblogic.home}"/>
<sysproperty key="osb.home" value="${osb.home}"/>
<sysproperty key="osgi.bundlefile.limit" value="500"/>
<sysproperty key="harvester.home" value="${osb.home}/harvester"/>
<sysproperty key="osgi.nl" value="en_US"/>
<sysproperty key="sun.lang.ClassLoader.allowArraySyntax" value="true"/>
<sysproperty key="osgi.bundlefile.limit" value="750"/>
<sysproperty key="middleware.home" value="${fmw.home}"/>
</java>
</target>
</project>
With the target:importToOSB,I was able to successfully import into OSB11g environment
but with target:exportFromOSB or exportFromWorkspace I'm unable to export from OSB11g environment
to my local directory
So my intention is to get the OSB11g exported into my local directory
Can you please help me out in getting this resolved
Thanks
RS

Using DB Adapter for MS SQL Server 2005 SP in OSB 11g.

Hi All,
I have a requirement to create a DB Adapter for MS SQL Server Stored Procedure in JDeveloper and export the Adapter file to OSB 11g. I have Created the Adapter and imported it into OSB 11g successfully. Created the Datasource and Connection pool also in console.
The problem is while trying to execute the created business Service, I am getting the error as below,
<Oct 26, 2012 12:20:25 PM IST> <Error> <JCATransport> <BEA-381967> <Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/Test/CheckAppID/WL_Driver/CheckAppId_WL_Driver [ CheckAppId_WL_Driver_ptt::CheckAppId_WL_Driver(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CheckAppId_WL_Driver' failed due to: Unimplemented string conversion.
Conversion of JDBC type to String is not supported.
An attempt was made to convert a Java object to String using an unsupported JDBC type: .
; nested exception is:
BINDING.JCA-11804
Unimplemented string conversion.
My XSD is ,
<element name="InputParameters">
<complexType>
<sequence>
<element name="application_id" type="int" db:index="1" db:type="INT" minOccurs="0" nillable="true"/>
</sequence>
</complexType>
</element>
<element name="OutputParameters">
<complexType>
<sequence>
<element name="RowSet0" type="db:RowSet0_RowSet" db:type="RowSet0" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
<element name="RowSet1" type="db:RowSet1_RowSet" db:type="RowSet1" minOccurs="0" maxOccurs="unbounded" nillable="true"/>
</sequence>
</complexType>
</element>
<complexType name="RowSet1_RowSet">
<sequence>
<element name="RowSet1_Row" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="cde" type="int" db:type="INT" minOccurs="0" nillable="true"/>
<element name="msg" db:type="NVARCHAR" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="255"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
<complexType name="RowSet0_RowSet">
<sequence>
<element name="RowSet0_Row" minOccurs="0" maxOccurs="unbounded">
<complexType>
<sequence>
<element name="aaa" type="boolean" db:type="BIT" minOccurs="0" nillable="true"/>
<element name="bbb" db:type="NVARCHAR" minOccurs="0" nillable="true">
<simpleType>
<restriction base="string">
<maxLength value="10"/>
</restriction>
</simpleType>
</element>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
I don't know why there is a datatype conversion error.
Help me in resolving this.
Regards,
Nataraj R.

Hi,
I believe NVARCHAR is an unsupported type...
The following document lists the supported data types for SQL Server stored procedures and functions... NVARCHAR is not in the list... :-(
http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_db.htm#CHDEBEEE
Hope this helps...
Cheers,
Vlad

Writing a file using ssh in OSB 11g

Hi
OSB 11G
Once I fetch from DB, i am able to write a flat file(delimiter with pipe) using Messaging Service and MFL.
Now, my requirement is to write using SSH .
Can anyone let me know how do I configure it in my Business Service?
Thanks
Edited by: soauser on Jul 12, 2011 9:08 AM

OSB supports SSH File Transfer Protocol (SFTP) using SSH version 2 with SFTP transport -
section "26.5 SFTP Transport" at http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/http_poller.htm#i1085854
If existing options are not sufficient, you may also create custom transport using transport SDK and use that in OSB -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_tsdk.htm#sthref954
Regards,
Anuj

Configure OSB 11g to use the same domain as SOA Suite 11g

Hi,
A quick question on OSB Installation and extend the weblogic domain created for soa for OSB also. Please guide me what i am following is the correct path.
I followed the soa 11g and osb 11g installation doc from Eric Elzinga blog also checked oracle doc. Am quite confused about the directory structure to cofigure SOA Suite 11g and OSB 11g.
After SOA suite install , I Configure Oracle SOA Suite by following the below path
Run: middleware/wlserver_10.3/common/bin/config.exe (followed the blog ON OSB 11g Installation from Eric Elzinga).
I have seen another path to configure soa suite from oracle doc
SOA_ORACLE_HOME\common\bin\config.cmd
eg: E:\oraclehome\11g\middleware\Oracle_SOA1\common\bin\config.cmd
both directory str are correct?
After OSB installation , to configure OSB , I choose to reuse the SOA Suite domain to extend it with the Oracle Service Bus components. so in that case , is it the right directory structure I am following is
<Middleware_Home>\oracle_common\common\bin\config.bat.
eg: E:\oraclehome\11g\middleware\oracle_common\common\bin\config.bat
Thanks in advance
jk

Eventually you configure the weblogic domain always (either it is for SOA or OSB or BPM or all), so you should use middleware/wlserver_10.3/common/bin/config.exe
Regards,
Anuj

Using OSB 11g with OEPE

Hi,
I have downloaded oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32 stand-alone from http://www.oracle.com/technology/software/products/oepe/oepe_11115.html?rssid=rss_otn_soft. I am planning to install Oracle Service Bus 11.1.1.3.0 on a remote server and use the OEPE IDE in my local system to develop the proxy and business services to deploy on the remote OSB server. My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ? And how do I connect from the IDE to the remote OSB server?
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server? By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?
Thanks,
sathish

My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ?Yes. While installing the OSB, go to custom options and you should have a choice to install OSB plugins in any pre-existing OEPE. Personally I have not tried this method.
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server?I'm not sure what you meant by "OSB 11g server" but you should use
Oracle WebLogic Server 11gR1 (10.3.3) + Coherence + OEPE - Package Installer to get the weblogic bundled with OEPE, then install Service Bus (11.1.1.3.0)
on this install. OSB plugins required for OEPE will be installed. Now you can use this OEPE to connect to remote OSB server. This is what I personally prefer.
By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?Yes.
Manoj

Using OSB 11g with OEPE 11.1.1.5.0

Hi,
I have downloaded oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32 stand-alone from http://www.oracle.com/technology/software/products/oepe/oepe_11115.html?rssid=rss_otn_soft. I am planning to install Oracle Service Bus 11.1.1.3.0 on a remote server and use the OEPE IDE in my local system to develop the proxy and business services to deploy on the remote OSB server. My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ? And how do I connect from the IDE to the remote OSB server?
Thanks,
sathish

My first question is are there any plugins that need to be installed in OEPE 11.1.1.5.0 to use it as the IDE for OSB ?Yes. While installing the OSB, go to custom options and you should have a choice to install OSB plugins in any pre-existing OEPE. Personally I have not tried this method.
Or is it a better option to get the OEPE by installing the OSB 11g server and then abandon the installed server and use the OEPE IDE to connect to a remotely installed OSB server?I'm not sure what you meant by "OSB 11g server" but you should use
Oracle WebLogic Server 11gR1 (10.3.3) + Coherence + OEPE - Package Installer to get the weblogic bundled with OEPE, then install Service Bus (11.1.1.3.0)
on this install. OSB plugins required for OEPE will be installed. Now you can use this OEPE to connect to remote OSB server. This is what I personally prefer.
By doing this, will I get all the plugins that I need for the OSB development pre-configured in the OEPE IDE?Yes.
Manoj

OSB 11g - Clustered - Email protocol not available in transport config page

Hi,
We have a clustered environment of Oracle SOA suite and OSB server on OEL 5/Solaris-64 Bit. While trying to create a business service with protocol as Email, we do not get email in the drop down.
Whereas in standalone environment we got it and we are able to create the business service.
Even while creating a Proxy Service we do not get email protocol in the transport configuration drop down.
When I try to import a business service from the standalone server where the Business Service is created, I get the following error:
Transport provider with id 'email' is not registered
I am using OSB console (to import as well as create BS).
What may be the reason? Is there any setting we need to do in a clustered environment for the email protocol? Please advice.
Thanks,
Sanjay

At least a part of the answer is in http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/deploy/highav.html
+File, FTP, and Email are poller based transports. Since these protocols are not transactional, to increase reliability and high availability, an additional JMS-based framework has been created to allow these transports to recover from failure. These transports use the JMS framework to ensure that the processing of a message is done at least once. However, if the processing is done, but the server crashes or the server is restarted before the transaction is complete, the same file may be processed again. The number of retires depends on the redelivery limit that is set for the poller transport for the domain.+
try the suggested wlsb.internal.transport.task.queue.email
hth,
Peter Paul

How to create outside Logging file in osb 11g using log4j.jar?

Hi all,
Currently, i am using osb 11g to develop a system. In the system we need to create a log file using log4j.jar library. This sub-program is working in the osb 10g base but fail to work in the osb 11g base. Can anyone give me some advice about this matter? Have anyone created one like this in 11g? Is it successful?

Sorry path is missing for the above request.
path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
please help.
Saravanan.K

OSB 11g Domain Configuration.

Hello,
I am having trouble understanding the results of the OSB 11g domain configuration. In creating the domain i have selected the following options:
Oracle Service Bus OWSM Extension
Oracle Service Bus Extension - All domain topologies
Weblogic Advanced Web Services for JAX-RPC Extension
Oracle WSM Policy Manager
Oracle JRF
I have selected the 'all domain topologies' as i wish to end up with an 'AdminServer' (using port 7001) and 'osb_server1' (using port 8011). Everything installs without a problem, its that i just don't understand the outcome. The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server. I also notice that the osb console is targeted only at the admin server. The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server? This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?
Can someone confirm / explain to me what is going on or why it works this way, please?

The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server.Your observation is correct.
I also notice that the osb console is targeted only at the admin server.Yes. This is by design.
The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server?No. This cannot happen. When you activate the configuration, OSB deploys configuration to the managed server.
This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?Are you test console?
Manoj
Edited by: Manoj Neelapu on May 24, 2010 9:28 AM

OSB 11g help

hello evey one,
i have the following question which is very very important to continue my work with OSB 11g.
i have developed two web services the first takes data from table X and the other one is insert that data to Table Y, and i created a OSB configuration project and OSB project and for now every thing is fine since i can call both web Services useing proxy service from web service client tool.
what i need is how can i set the OSB to call web service 1 automatically every 1 hour, 1 minute its does matter, and send the data to web service two to be inserted???????
please help!!!!!

I suppose you are after a timer transport in OSB here..Please take a look at this article which explains a reference implementation using the weblogic timer service:
http://blogs.oracle.com/jamesbayer/2007/11/weblogic_scheduling_a_polling.html
There are some concrete viewpoints that a service bus is not the right place to put in timer facility.. See the discussion at this thread within this forum:
Re: How to implement in OSB: Scheduling, Timers and Custom properties

OSB 11G - Routing with policy and forwarding authentication headers

Hi there,
I'm having problems trying to add authentication to some services developed with OSB 11G.
One of the requirements is that the services authenticate using the "oracle/wss_username_token_service_policy" policy... So far so good...
My problem now is that one of the services I'm trying to route messages to needs the same authentication as the OSB router... I've tried everything I found but without any success... The headers aren't being propagated...
I've found out that the header variable has the Authentication segments so I can remove the routing, add a service callout and add the header variable to it.. But this is kind of a hammered solution...
Is there any other solution that I'm missing?
Thanks in advance,
Best Regards,
Daniel Alves
Edited by: 863416 on Sep 18, 2012 9:49 AM

Hi,
transporting header setting is described here
Yuan's SOA Blog: Retrieve and pass around http Authorization header with OSB
but something is missing, I have to set proxy service Authentication to Basic. But then OSB authenticate inbound request at local scope and I want to authenticate at called web service level. How to do that?

OSB 11g - SB transport using Soap1.2

Similar Messages

Maybe you are looking for