OSB Cluster: Defining target server for mailpoll failed (Weblogic 10.3.3.0)

Hi!
Deploying is fine without email polling. But with email polling proxy service deployed (Eclipse OEPE) fails with the errormsg:
*[WliSbTransports:381611]Poller target server should be specified in case of cluster domain.*
To solve this problem, I've tried to set the target server but not found in weblogic console. The domain created with Configuration Wizard.
The cluster consists of two managed servers + loadbalancer + adminserver.
Topology: http://img140.imageshack.us/img140/6128/mozscreenshot69.png
BEA-381611
Error: Poller target server should be specified in case of cluster domain.
Description
Poller target server should be specified in case of cluster domain.
Action
Make sure that the File proxy configuration has one of the managed servers as poller target server if it is running in the cluster.
Edited by: shuttle on 2011.01.21. 4:14

Select the managed server in "Managed Server" setting in E-Mail Transport Configuration Page on sbconsole (of your proxy)
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/transports.htm#i1268939
Regards,
Anuj

Similar Messages

Error targeting server for the EJB module while deploying the sample banking application

I am currently having a very difficult time attempting to deploy the
example banking application that I downloaded from the BEA website. I
have followed all of the steps in the "Hands On: Deploying the Sample
Banking Application" document, and I do fine until I get to the next to
last step. When I attempt to target the server for the EJB module, the
deployment process generates the error that I have included at the end
of this message.
I can get to the login.html page under "http://localhost:7001/banking/",
but after that I can't go further.
Any suggestions. BTW, in case you haven't figured it out, I'm brand new
to BEA WebLogic server.
Thanks in advance for any help you can offer.
Scott
Error deploying application \ejb:
Unable to deploy EJB: \ejb from \ejb:
Compiler failed
executable.exec(java.lang.String[javac,-nowarn,-classpath,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb;E:\bea\wlserver6.1\.\config\ScottsServer\applications\.wlnotdelete\wlap60763\ejb;E:\bea\jdk131\jre\lib\rt.jar;E:\bea\jdk131\jre\lib\i18n.jar;E:\bea\jdk131\jre\lib\sunrsasign.jar;E:\bea\jdk131\jre\classes;.;E:\bea\wlserver6.1\lib\weblogic_sp.jar;E:\bea\wlserver6.1\lib\weblogic.jar,-d,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb\examples\tutorials\migration\banking\*.java])
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:302)
at weblogic.ejb20.deployer.Deployer.runEJBC(Deployer.java:296)
at weblogic.ejb20.deployer.Deployer.compileEJB(Deployer.java:684)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:851)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy11.addDeployment(Unknown Source)
at
weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1516)
at
weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:895)
at
weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:847)
at
weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:295)
at
com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
at
com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:322)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:204)
at $Proxy68.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:92)
at
weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:135)
at
weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at
weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

The deployment process invokes javac internally to compile some generated classes.
Do you have javac installed and in the path?
Seth
Scott Springer wrote:
I am currently having a very difficult time attempting to deploy the
example banking application that I downloaded from the BEA website. I
have followed all of the steps in the "Hands On: Deploying the Sample
Banking Application" document, and I do fine until I get to the next to
last step. When I attempt to target the server for the EJB module, the
deployment process generates the error that I have included at the end
of this message.
I can get to the login.html page under "http://localhost:7001/banking/",
but after that I can't go further.
Any suggestions. BTW, in case you haven't figured it out, I'm brand new
to BEA WebLogic server.
Thanks in advance for any help you can offer.
Scott
Error deploying application \ejb:
Unable to deploy EJB: \ejb from \ejb:
Compiler failed
executable.exec(java.lang.String[javac,-nowarn,-classpath,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb;E:\bea\wlserver6.1\.\config\ScottsServer\applications\.wlnotdelete\wlap60763\ejb;E:\bea\jdk131\jre\lib\rt.jar;E:\bea\jdk131\jre\lib\i18n.jar;E:\bea\jdk131\jre\lib\sunrsasign.jar;E:\bea\jdk131\jre\classes;.;E:\bea\wlserver6.1\lib\weblogic_sp.jar;E:\bea\wlserver6.1\lib\weblogic.jar,-d,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb,E:\bea\wlserver6.1\tmp_ejbwinged-demon7001\banking-exploded_\ejb\examples\tutorials\migration\banking\*.java])
at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:302)
at weblogic.ejb20.deployer.Deployer.runEJBC(Deployer.java:296)
at weblogic.ejb20.deployer.Deployer.compileEJB(Deployer.java:684)
at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:851)
at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
at weblogic.j2ee.Application.addComponent(Application.java:163)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:117)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:329)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:144)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:636)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:621)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at
weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:491)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:361)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy11.addDeployment(Unknown Source)
at
weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1516)
at
weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:895)
at
weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:847)
at
weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:295)
at
com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
at
com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:322)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:204)
at $Proxy68.setTargets(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:92)
at
weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:135)
at
weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
at
weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Duplicate target database for standby failed

Hi,
Im trying to uplicate target database for standby and get error message bellow :
RMAN> DUPLICATE TARGET DATABASE
2>   FOR STANDBY
3>   FROM ACTIVE DATABASE
4>   DORECOVER
5>   SPFILE
6>     SET db_unique_name='dgtst' COMMENT 'Is standby'
7>     SET LOG_ARCHIVE_DEST_2='SERVICE=dgtst ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dgtst'
8>     SET FAL_SERVER='dgtst' COMMENT 'Is primary'
9>   NOFILENAMECHECK;
Starting Duplicate Db at 24-FEB-12
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/24/2012 22:51:21
RMAN-05501: aborting duplication of target database
RMAN-03009: failure of allocate command on ORA_AUX_SBT_TAPE_1 channel at 02/24/2012 22:51:21
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2Please advice
Thanks

Hello mseberg,
Actually you find the problem .....
Adding the following softlink helped :
ln -s /opt/omni/lib/libob2oracle8_64bit.so /u01/app/oracle/product/11.2.0/DG11gR2TST/lib/libobk.so
I run the duplicate command and its look much better:
$ rman TARGET sys/mysyspass@dgtst AUXILIARY sys/mysyspass@drtst
Recovery Manager: Release 11.2.0.2.0 - Production on Sat Feb 25 07:43:15 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DGTST (DBID=244743902)    <<<=== connected
connected to auxiliary database: DGTST (not mounted)    <<<=== connected
RMAN> DUPLICATE TARGET DATABASE
2> FOR STANDBY
3> FROM ACTIVE DATABASE
4> DORECOVER
5> SPFILE
6> SET db_unique_name='dgtst' COMMENT 'Is standby'
SET LOG_ARCHIVE_DEST_2='SERVICE=dgtst ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dgtst'
7> 8> SET FAL_SERVER='dgtst' COMMENT 'Is primary'
9> NOFILENAMECHECK;
Starting Duplicate Db at 25-FEB-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_SBT_TAPE_1
channel ORA_AUX_SBT_TAPE_1: SID=156 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_1: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_SBT_TAPE_2
channel ORA_AUX_SBT_TAPE_2: SID=189 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_2: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_SBT_TAPE_16
channel ORA_AUX_SBT_TAPE_16: SID=129 device type=SBT_TAPE
channel ORA_AUX_SBT_TAPE_16: Data Protector A.06.11/PHSS_40470/PHSS_40471/DPSOL_00391/DPLNX_
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=160 device type=DISK
contents of Memory Script:
   backup as copy reuse
   targetfile '/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/orapwdgtst' auxiliary format
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/orapwdgtst'   targetfile
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora'   ;
   sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/DG11gR2TST/dbs/spfiledgtst.ora''";
executing Memory Script
Starting backup at 25-FEB-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=21 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/25/2012 07:44:02
ORA-17629: Cannot connect to the remote database server <<<<<<====
ORA-17627: ORA-12541: TNS:no listener                    <<<<<<====
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 02/25/2012 07:44:03
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/25/2012 07:44:03
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12541: TNS:no listener
ORA-17629: Cannot connect to the remote database serverAs you can see above rman successfully connected to the local and remote database.
It also successfully allocated the DISK channel , but than it failed on :
ORA-17627: ORA-12541: TNS:no listenerI cant understand why it happen:
$ tnsping dgtst
TNS Ping Utility for HPUX: Version 11.2.0.2.0 - Production on 25-FEB-2012 08:54:48
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hercules)(PORT = 1528))) (CONNECT_DATA = (SERVICE_NAME = dgtst)))
OK (0 msec)
$ tnsping drtst
TNS Ping Utility for HPUX: Version 11.2.0.2.0 - Production on 25-FEB-2012 08:54:54
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = pulse)(PORT = 1528))) (CONNECT_DATA = (SERVICE_NAME = dgtst)))
OK (10 msec)And as you i show the rman successfully connect to both rempte and local as SYS user.

Duplicate target database for standby failing with below error

Hello All, Need your assistance
We are creating a physical standby database (standalone) from 2 node RAC database, OS =RHEL5 and DB =11gR2
What we did: We took RMAN backup of primary DB along with archives and copied to standby server in same location. We have modified necessory prameters on primary as well as standby too.
The command we used :
RMAN>connect target sys/pwd@primary auxiliary sys/pwd@stdby
RMAN> run {
allocate auxiliary channel ch1 type disk;
duplicate target database for standby dorecover nofilenamecheck;
release channel ch1;
Note we tried : duplicate target database for standby as well as duplicate target database for standby nofilenamecheck methods too....But no luck..we are getting following error.
channel ch1: reading from backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
channel ch1: ORA-19870: error while restoring backup piece /u01/BDB/BWFCCPRD_5fmpdvce_1_1
ORA-19501: read error on file "/u01/BDB/BWFCCPRD_5fmpdvce_1_1", block number 121856 (block size=8192)
ORA-27072: File I/O error
Additional information: 4
Additional information: 121856
Additional information: 1036288
failover to previous backup
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/20/2011 09:16:11
RMAN-05501: aborting duplication of target database
RMAN-05556: not all datafiles have backups that can be recovered to SCN 41855007833
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
could you pease help to resolve this ....?
Note : Creating standby using RMAN 11g new feature : duplicate target database for standby from active database is not possible in our environment since the network bandwith is tooooo low, We have tried and not able to succeed because of n/w issue, So we are doing this alternate method...!!!
Looking for your valuable advises...
Thanks in Advance....

Take the fresh backup and also check the space crunch. The below clink may help you
ORA-27072: File I/O error Additional information: 2
--neeraj
Edited by: Vishen on Oct 20, 2011 2:14 PM

Duplicate target database for standby failing ...

hi,
below is the message reported at the end of rman session log:
channel ORA_AUX_DISK_1: restore complete, elapsed time: 01:09:50
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/10/2011 21:01:34
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
10.2.0.5/HPUX 11.31.
running "duplicate target database for standby" ...
pl. help to understand and troubleshoot..
regards,
X

RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
running "duplicate target database for standby" ...
pl. help to understand and troubleshoot..refet this metalink note
*Rman Restore Fails With 'RMAN-06023: no backup ...of datafile .. to restore' Although Backup is Available [ID 793401.1]*

Dynamically define target address for logical ports (NW'04)

Hello,
when developing a web-service client using standalone proxy, you have to define the target address of a Web Service in the property-page for the Logical Port.
We have the following problem. If, for any reason, the URL of the Web Service changes (i.e. the hostname or the port), we have to rebuild the whole project and then redeploy the project.
Is there a way to change this URL dynamically by java-code?
Thanks in advance,
Jarle

Hi,
You can get Server name Dynamically. You follow the below steps.
1. Create a HTTP Destination in visual administrator which stores the server name and port.
2. Access this variable in your controller init method and build your web service url with server name and port and use _setEndPoint() method
String prefixURL = "http://";
// your Service Address...remove the first part from service url.
String serviceURL = "/TestService/Config1?style=document";
DestinationService dstService = (DestinationService) obj;
Destination destination = dstService.getDestination("HTTP","ApplicationServer");
Properties destprop = destination.getDestinationProperties();
HTTPDestination httpDestination = (HTTPDestination) destination;
String serverName = httpDestination.getUrl();
prefixURL = prefixURL + serverName;
String testURL = prefixURL + serviceURL;
Request<Obj> testReq = new Request<Obj>();
testReq._setEndPoint(testURL);
You need to import below files into your project.
import com.sap.security.core.server.destinations.api.Destination;
import com.sap.security.core.server.destinations.api.DestinationService;
import com.sap.security.core.server.destinations.api.HTTPDestination;
import java.net.HttpURLConnection;
import java.util.Properties
hope it solved your problem.
Regards,
Sridhar

Defining target page for category banner link

When showing the group by category banner in an item region the category name shows up as a link. I need the target of this link to be a page I can control the look and feel of - how to?

In Release 2 (9.0.2) and later you can modify the category pages just like any other page, including controlling the attributes that appear. In 9.0.2.6 you can now apply a template to these pages as well.
In 3.0.x you have limited ability to control the appearance - the folder will pick up the style of the root folder of the page group. Otherwise, the appearance of the folder is fixed.
Regards,
Jerry
PortalPM

How to define a different Server for Firefox Sync

I would like to define a server for sync-data other than the default Firefox- Server. What are the requirements for such a server?
How is the setup?

See:
* http://tobyelliott.wordpress.com/2009/09/11/weave-minimal-server/
* https://wiki.mozilla.org/Services/Sync

Cannot create web service: target server does not support JAXRPC

I created a web application project, with bundled Tomcat5.5 as server. When I tried to create a web service (right click project name, select New->web service), I got a error message saying "The current target server for this project does not support JAXRPC so no web service can be created". I tried adding jaxrpc lib to the project, it didn't work. I also tried to add jaxrpc jar to Tomcat using Server Manager, it didn't work either.
Did I miss anything, during installation or project setup...? Is there a way to make the problem go away?
Many thanks for your help.

Can you please try the bundled Sun Java System Application Server as the target server for the project? (You can change the target server from the project's properties dialog, in the 'Run' category, using the 'server' drop-down box).
I also noticed the same error message as you when i set my target server to bundled tomcat; when i changes the server to SJSA, the message went away.
When i searched in the IDE Help (by selecting Help | Help Contents menu item, switching to 'search' tab in the help window , typing 'jwsdp tomcat' in the Find box and pressing enter), I came across the topic "Using JWSDP 1.6 on the Tomcat Web Server". This topic explains how to install Web Services Developer Pack on tomcat server. I could be wrong but I think this perhaps needs to be installed manually...

OSB: cluster creation script fails to delete migratable targets

Hi,
I am working on a wslt script which creates an OSB domain with a cluster with one admin server and two managed servers. In this script, after adding the OSB required templates, I would like to delete the migratable targets created by the template. I do this like this:
cut
def deleteResources(mbeanType):
     log ('Deleting resources of type %s' % mbeanType)
     cd('/')
     mbeans = get(mbeanType+'s')
     for mbean in mbeans:
          log ('\tDeleting %s' % mbean.name)
          cd('/')
          delete(mbean.name, mbeanType)
def deleteTemplateGeneratedResources():
     deleteResources('JMSServer')
     deleteResources('SAFAgent')
     deleteResources('FileStore')
     deleteResources('JMSSystemResource')
     deleteResources('JDBCSystemResource')
     deleteResources('MigratableTarget')
deleteTemplateGeneratedResources()
cut
This goes through but when I save the domain (updateDomain()) the migratable targets still exist! I tried it manually on this domain after I do the delete() the migratable targets disapper (ls('/MigratableTarget') fails saying there is no MigratableTarget). However, after I do an updateDomain() the migratable targets remain. How can I get rid of them? Why don't they get removed?
Regards
Dimo

I tried deleting and creating them anew but it then messes up the configuration of the migratable targets. What seems to work now is to delete them, create new ones with DIFFERENT names and then updateDomain(). In this case the old ones get really deleted. Really messy stuff.

Trying to create reference for application in target server failed;

I have an ear file that I am trying to deploy using the "Deploy Enterprise Applications/Modules" page on the console.
The console gives me a message saying
"Trying to create reference for application in target server failed; Application tsom_oes is not found in config context"
tsom_oes is the name of my application, or it was. I've changed every instance of that name I can find and still it tells me it is looking for tsom_oes.
Can anyone tell me just what is looking for it and where it is expecting to find it?
I ran the verifier on the ear file and it did give me some errors, although none of them seem to relate to this. Specifically it told me it did not like the xml in a tld file I'm using
and it seems to think Hibernate needs a bunch of JBoss classes (none of which are referred to by my app anywhere). I'm guessing the verify is mistaken on those, but if anyone knows better I'd like to hear
Meanwhile I don't know why it won't deploy, nor why it is still looking for tsom_oes.
One more thing I must add: this ear file exposes portlets which I am hoping will be accessible through the portal server. The ear file works on JBoss, but I have added what I think are the necessary sun xml files to make it run here.
By 'exposes portlets' I mean that I have created a sun-portlet.xml and implemented the appropriate interfaces (all of which work on JBoss).
Environment:
Sun App server 9.1 plus portal server 7.2 on Windows XP

Okay, I found the answer. I had hacked the domain.xml for this some time ago (this task has been off and on a lot) and forgotten.
I found the tsom_oes reference in there and removed it. Now it deploys.
Hopefully this helps someone else some day... probably not though, eh?

Ktpass: failed getting target domain for specified user

Hi all,
I am trying to generate keytab file by following document
http://docs.oracle.com/cd/E17904_01/doc.1111/e15740/wna.htm#REGADWNA
relevant section 7.3.2.
Environment we are using as follows:
Microsoft windows server 2008
Command executed :
ktpass /princ [email protected] /mapuser [email protected] /pass Micro123 /out c:\poc.keytab
Here NTDS (AD windows service name)
MSCAD.AE (AD domain name)
[email protected] (AD user)
Micro123 (Password)
c:\poc.keytab (file location)
while executing display error as response:
C:\>ktpass /princ [email protected] /mapuser [email protected] /pass Micro123 /out c:\poc.keytab
Cannot bind to default domain: 0x54b
ktpass:failed getting target domain for specified user.
Your assistance in this regard would be highly desirable.
Regards,
Syed Waqar

I don't think you have your principal name defined correctly.
It should be in the following format:
host/[email protected]
http://technet.microsoft.com/en-us/library/cc753771.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-Walt

Yes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt

Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.

Hi All,
Last week we face problem on SQL server 2005 Cluster server.
SQL cluster was down with below issue.
Event 1069 : Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Event 19019 : [sqsrvres] CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
Kindly any one provide resolution for my above issue.

I have checked in event viewer Application error side error:
Event 19019 : [sqsrvres]
CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
System error :
Event 1069 : Cluster resource 'SQL Server' in Resource
Group 'MSSQL' failed.
Before this no error is there in event viewer

OSB Cluster: Defining target server for mailpoll failed (Weblogic 10.3.3.0)

Similar Messages

Maybe you are looking for