Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Hi All,
Last week we face problem on SQL server 2005 Cluster server.
SQL cluster was down with below issue.
Event 1069 : Cluster resource 'SQL Server' in Resource Group 'MSSQL' failed.
Event 19019 : [sqsrvres] CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
Kindly any one provide resolution for my above issue.
I have checked in event viewer Application error side error:
Event 19019 : [sqsrvres]
CheckServiceAlive: Service is dead
[sqsrvres] OnlineThread: service stopped while waiting for QP.
[sqsrvres] OnlineThread: Error 1 bringing resource online
System error :
Event 1069 : Cluster resource 'SQL Server' in Resource
Group 'MSSQL' failed.
Before this no error is there in event viewer
Similar Messages
-
While installing sql server 2012 with failover clustering I got the following error:
The cluster resource 'SQL Server' could not be brought online. Error: There was a failure to call cluster code from a provider. Exception message: Generic failure. Status code: 5942. Description: The resource failed to come online due to the failure of one
or more provider resources.
The two nodes of the sql server failover have been successfully prepared. The error came while running the advance cluster completion option.
In the clustered events in failover cluster manager the following message is displayed:
Cluster resource 'SQL Network Name (CPCTestSQLClus)' of type 'Network name' in clustered role 'SQL Server (MSSQLSERVER)' failed.
I have done various checking and the issue remained. I tried to start the sqlPlease find below part of the content of the cluster log. I hope this is helpful in resolving the issue:
00000998.000010e8::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online called for resource SQL Network Name (CPCTestSQLClus)
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 997/0.
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlineCallIssued -> OnlinePending( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlineCallIssued-->OnlinePending.
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Online thread
000005a4.0000050c::2013/05/08-20:45:00.233 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000012f0::2013/05/08-20:45:00.233 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Initializing config info
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Skipping initialization of 'Identity' module because netname is not yet created
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual online of resource.
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Obtaining IP info for resource SQL IP Address 1 (CPCTestSQLClus)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Using provider SQL IP Address 1 (CPCTestSQLClus), ip address 10.144.166.160, mask 255.255.255.0, prefix length 24
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Resource has 1 IPs
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: IP: Type Ipv4, Address 10.144.166.160:~0~, Prefix 10.144.166.160/24, Online true, Transport \Device\NetBt_If3
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000012f0::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Offline
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Calling initialize of the configuration implementation
000005a4.00001350::2013/05/08-20:45:00.248 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Creating a New AD NetName (type Singleton)...
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Initializing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/InitializeIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: OnInitialize (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: CanModuleBeInitializedImp - Module can be initialized, current state Closing
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending Initialize to module NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: Agent: Sending request Netname/Initialize to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Waiting for ongoing slow strand to complete (if any)
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Signaling main strand to initialize module
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Initializing Name: CPCTestSQLClus, NetbiosName: CPCTESTSQLCLUS, Type: Singleton, Created: false
00000998.000010e8::2013/05/08-20:45:00.248 INFO [RES] Network Name: [NNLIB] GetCreatingDC - name CPCTestSQLClus, lookup flags = 1
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NNLIB] GetDCWithFlags - using DC
\\MY01DC03.Domain.net, domain name Domain.net, IsReadOnly 0, Object exists 0
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: [NN] Setting crypto access members for encrypt. New container = false.
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.000010e8::2013/05/08-20:45:00.452 INFO [RES] Network Name: Agent: Sending request Netname/LastDcChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.452 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: LastDc Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.452 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting last DC in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: LastDc Changed (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: Agent: Sending request Netname/PasswordChange to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Password Changed, configOnly: 1
000005a4.00001350::2013/05/08-20:45:00.468 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting password in clusdb returned status 0
00000998.0000075c::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: PasswordChanged (configOnly true), result: 0
00000998.000010e8::2013/05/08-20:45:00.468 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.00000ab8::2013/05/08-20:45:00.636 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.647 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.0000075c::2013/05/08-20:45:00.784 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.815 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.00000ab8::2013/05/08-20:45:00.830 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OU name for VCO is OU=NewComputers,OU=WORKSTATIONS,DC=Domain,DC=net
00000998.000010e8::2013/05/08-20:45:00.924 INFO [RES] Network Name: Agent: Sending request Netname/GetToken to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Identity
00000998.00000ab8::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Module is not yet initialized. Trying to obtain a new token.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining new token
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NN] Setting crypto access members for decrypt. New container = false.
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain Domain.net
00000998.0000075c::2013/05/08-20:45:00.924 INFO [RES] Network Name: [NNLIB] PopulateKerbKDCLookupCache - DC flags 0
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 94, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] Priming local KDC cache to
\\MY01DC02.Domain.net for domain label Domain
00000998.0000075c::2013/05/08-20:45:00.940 INFO [RES] Network Name: [NNLIB] LsaCallAuthenticationPackage success with a request of size 86, result size 0 (status: 0, subStatus: 0)
00000998.0000075c::2013/05/08-20:45:01.018 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 0)
00000998.0000075c::2013/05/08-20:45:01.096 WARN [RES] Network Name: [NNLIB] LogonUserEx fails for user CPCTestWinClus$: 1326 (useSecondaryPassword: 1)
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NNLIB] Logon failed for user CPCTestWinClus$ (Error 1326), DC
\\MY01DC02.Domain.net, domain Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Obtaining Windows Token for Name: CPCTestWinClus, SamName: CPCTestWinClus$, Type: Singleton, Result: 1326, LastDC:
\\MY01DC02.Domain.net
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: Slow Operation, FinishWithReply: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: InternalReplyHandler with event: 1326
00000998.0000075c::2013/05/08-20:45:01.096 INFO [RES] Network Name <Cluster Name>: Identity: End of Slow Operation, state: Error/Idle, prevWorkState: Idle
00000998.00000ab8::2013/05/08-20:45:01.096 WARN [RES] Network Name <Cluster Name>: Identity: Get Token Request, currently doesnt have a token!
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: End of Slow Operation, state: Initializing/Writing, prevWorkState: Writing
00000998.000010e8::2013/05/08-20:45:01.096 WARN [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Slow operation has exception ERROR_INVALID_HANDLE(6)' because of '::ImpersonateLoggedOnUser( GetToken() )'
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD): 6
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: InitializeReplyCreation of NetName (type Singleton), result: 6, IsCanceled: false
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Setting 'StatusKerberos' in clusdb returned status 0
00000998.000010e8::2013/05/08-20:45:01.096 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Deleting ResourceData, CreatingDC, ObjectGUID for a newly created netname from cluster database
000005a4.00000cd8::2013/05/08-20:45:01.096 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnInitializeReply, Failure on (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration): 6
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 6
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: PerformOnline - Initialization of Configuration module finished with result: 6
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Online thread Failed: ERROR_SUCCESS(0)' because of 'Initializing netname configuration for SQL Network Name (CPCTestSQLClus) failed with
error 6.'
00000998.000012f0::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: All resources offline. Cleaning up.
00000998.000012f0::2013/05/08-20:45:01.112 ERR [RHS] Online for resource SQL Network Name (CPCTestSQLClus) failed.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] HandleMonitorReply: ONLINERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(6) result 5018/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): OnlinePending -> ProcessingFailure( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) OnlinePending-->ProcessingFailure.
000005a4.0000050c::2013/05/08-20:45:01.112 ERR [RCM] rcm::RcmResource::HandleFailure: (SQL Network Name (CPCTestSQLClus))
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] resource SQL Network Name (CPCTestSQLClus): failure count: 6, restartAction: 2 persistentState: 1.
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Greater than restartPeriod time has elapsed since first failure of SQL Network Name (CPCTestSQLClus), resetting failureTime and failureCount.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Will queue immediate restart (500 milliseconds) of SQL Network Name (CPCTestSQLClus) after terminate is complete.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): ProcessingFailure -> WaitingToTerminate( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [WaitingToTerminate to DelayRestartingResource] -> Terminating( DelayRestartingResource )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Terminate called for resource SQL Network Name (CPCTestSQLClus)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Entering Offline thread
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Performing actual offline of resource.
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AdminShare
00000998.000010e8::2013/05/08-20:45:01.112 ERR [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AdminShare: OnCloseBase, Error Already Closing, previous state: Closing/Ending
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AdminShare) result: 1904
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 1904
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.00000ab8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00000cd8::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:Configuration
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Canceling work, state: Closing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: OnCloseBase, previous state: Initializing/Idle
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closing... (PreviousState: Initializing, Created: false, Type: Singleton)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Closing (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/CloseIndirect to NN:Agent
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnClose (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: Sending request Netname/Close to NN:082d8ef5-62a8-4fee-acbc-e89b769e9181:AccountAD
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: Canceling work, state: Closing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: AccountAD: OnCloseBase, previous state: Initializing/Idle
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,AccountAD) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Finish Closing NetName (type Singleton) Module AccountAD, result 0, remaining... 0 (0)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- listing 3 instances ---------------------------------------------
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 082d8ef5-62a8-4fee-acbc-e89b769e9181:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Configuration: Closed
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: OnCloseReply (082d8ef5-62a8-4fee-acbc-e89b769e9181,Configuration) result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.0000075c::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: SyncReplyHandler Configuration, result: 0
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: 43dec41b-661c-42a8-ae23-b635d7ab11f5:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Offline/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Offline/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Closing/Ending (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: --- 7 modules for instance: c03fb105-9a50-4d00-8bee-afaf693f7efc:
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Configuration with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AccountAD with states: Initializing/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Client with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Identity with states: Error/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Dns with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: Netbios with states: Initialized/Idle (Alive)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: ---- Module: AdminShare with states: Initialized/Idle (BeingBorn)
00000998.000010e8::2013/05/08-20:45:01.112 INFO [RES] Network Name: Agent: -- 0 Zombie modules
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'SQL Network Name (CPCTestSQLClus)', gen(7) result 0/0.
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] Res SQL Network Name (CPCTestSQLClus): [Terminating to DelayRestartingResource] -> DelayRestartingResource( StateUnknown )
000005a4.0000050c::2013/05/08-20:45:01.112 INFO [RCM] TransitionToState(SQL Network Name (CPCTestSQLClus)) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
000005a4.0000050c::2013/05/08-20:45:01.112 WARN [RCM] Queueing immediate delay restart of resource SQL Network Name (CPCTestSQLClus) in 500 ms.
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001248::2013/05/08-20:45:01.112 INFO [RCM-rbtr] giving default token to group SQL Server (MSSQLSERVER)
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.112 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.112 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read/Write private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.127 INFO [RES] Network Name <SQL Network Name (CPCTestSQLClus)>: Getting Read only private properties
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.127 INFO [GEM] Sending 1 messages as a batched GEM message
000005a4.00001350::2013/05/08-20:45:01.143 INFO [GEM] Sending 1 messages as a batched GEM message
00000998.00000b78::2013/05/08-20:45:01.252 INFO [RES] Network Name: Agent: Sending request Netname/RecheckConfig to NN:c03fb105-9a50-4d00-8bee-afaf693f7efc:Netbios
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: Slow Operation, FinishWithReply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name: [NN] got sync reply: 0
00000998.00000ab8::2013/05/08-20:45:01.252 INFO [RES] Network Name <Cluster Name>: Netbios: End of Slow Operation, state: Initialized/Idle, prevWorkState: Idle -
Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aaI think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
GauravHi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li -
SP2 for SQL Server 2012 with SP1 is failed with Error result: -2067529723
SP2 for SQL Server 2012 with SP1 is failed when start the installtion from command prompt and thorws below errors in Passive node of the cluster.No other errors logged in eventviewer, temp folder and not created any log files in bootstarp folder.An error occurred during the SQL Server 2012 Setup operation.
Error result: -2067529723
Result facility code: 1220
Result error code: 5
For more information, review SQL Server 2012 Setup logs in your temp folder.It is not allowing to run the sql core setup to uninstall the cluster node and gives same error.Can any one got into the same issue and please help?ThanksPetchikumarHi,
Can you post summary.txt below link will help you locate it
https://msdn.microsoft.com/en-us/library/ms143702%28v=sql.110%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
Luckily my solution only has 10 packages. I have verified and re-verified that everyone is set to dontsavesensitive.
I have verified and re-verified that the solution has the protection level to dontsavesensitive.
What on earth is going on here? I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
Can someone please help me out here?
The Degenerate DimensionHi MMiligan,
Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
protection level corresponds to the value of 0):
DTS:ProtectionLevel="0"
The following similar thread is for your reference:
http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
SQL Server 2005 Resource Governor ?
Hello is there a way or method along the lines of Resource Governor within a SQL 2005 instance (am aware that that feature began starting with SQL 2008) ? (One DB app is over-consuming resources slowing down other DBs residing on same SQL Server.)
Also what are the pros & cons & things to be aware of SQL 2008 & up in using Resource Governor ? Heard that though it was a good new feature idea that it's not all that cracked up to be.
Thanks in advance.Your first question, the answer is - there is no stabile and reliable way.
Second is more in depth. Basically the pitfalls are that you're deciding what is best and over or under reserving could cause issues. Starting with 2014 you can also govern I/O which is not in 2008/R2/2012.
Sean Gallardy | Blog |
Twitter -
SQL Server 2014: Resource pool 'Pool_AdventureWorks2012'
Message after installing SQL Server 2014 in-memory OLTP sample:
A binding has been created. Take database 'AdventureWorks2012' offline and then bring it back online to begin using resource pool 'Pool_AdventureWorks2012'.
This is the definition:
CREATE RESOURCE POOL [Pool_AdventureWorks2012] WITH(min_cpu_percent=0,
max_cpu_percent=100,
min_memory_percent=0,
max_memory_percent=80,
cap_cpu_percent=100,
AFFINITY SCHEDULER = AUTO
min_iops_per_volume=0,
max_iops_per_volume=0)
GO
How do I use it exactly? Thanks.
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012Hi Kalman Toth,
According to your description, after you binding the database to the resource pool for binding to take effect via the system function
sp_xtp_bind_db_resource_pool, You must take the database offline and back online. If your database was bound to an a different pool earlier, this removes the allocated memory from the previous resource pool and memory allocations for your memory-optimized
table and indexes will now come from the resource pool newly bound with the database. Please refer to the following Transact-SQL statement.
USE master
GO
ALTER DATABASE <your database name> SET OFFLINE
GO
ALTER DATABASE <your database name> SET ONLINE
GO
USE <database name>
GO
There are detail about binding a database with Memory-Optimized tables to a resource pool, you can review the following article.
http://msdn.microsoft.com/en-us/library/dn465873(v=sql.120).aspx
http://msdn.microsoft.com/en-us/library/dn465869(v=sql.120).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server 2012 - RESOURCE MONITOR / PREEMPTIVE_XE_CALLBACKEXECUTE high CPU usage
Hello,
We are currently in the process of migrating an existing clustered SQL Server 2008 R2 instance over to a clustered SQL Server 2012 instance as we phase out the Windows Server 2008 with SQL Server 2008 R2.
The setup is identical for the SQL Server 2012 instance as it is on the SQL Server 2008 R2 instance. (meaning the RAM and CPU are both the same or better on the SQL Server 2012 instance)
The process in which we are migrating is that we're moving a few databases over to the new SQL Server 2012 instance each night. What we've noticed is that the CPU usage is much higher on the SQL Server 2012 instance than on the previous
SQL Server 2008 R2 instance even though the there is only 1/2 of the databases migrated to the 2012 instance.
Running the following script:
;with cte ([totalCPU]) as (select sum(cpu) from master.dbo.sysprocesses)
select
tblSysprocess.spid
, tblSysprocess.cpu
, CONVERT(BIGINT,(tblSysprocess.cpu * CONVERT(BIGINT,100))) / CONVERT(BIGINT, cte.totalCPU) as [percentileCPU]
, tblSysprocess.physical_io
, tblSysprocess.memusage
, tblSysprocess.cmd
, tblSysProcess.lastwaittype
from master.dbo.sysprocesses tblSysprocess
cross apply cte
order by tblSysprocess.cpu desc
Produces the following results:
In a clustered environment, is this normal and if not, does anyone know what this means or how to reduce the CPU usage?
Thanks.Hello,
The following query may help us identify extended events or audit configurations running on that SQL Server server that are producing that high CPU usage scenario.
SELECT
s.name
AS 'Sessions'
FROM
sys.server_event_sessions
AS s
WHERE
s.name
<> 'system_health'
and s.name
<> 'AlwaysOn_health';
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Can't access cluster via SQL Server Mng Studio unless node has ownership
Hi:
We have Windows and SQL 2008 R2 in a 2 node cluster. Failover and failback work like a dream. All the 'lights' are green. But we can only access the cluster when we're on the node that has ownership. I've deleted all DNS entries and successfully recreated
them via ipconfig /registerDns from each node, shutting down, restarting the actual cluster and taking the application and service offline then back on line. All DNS records got recreated perfectly. Cluster error log doesn't show anything when we
can't connect either. We can also ping all IPs, Hostnames and Clustername.Hi g_machuca,
According to your description, you want to implement failover and failback in SQL Server cluster environment. We need to verify if The cluster group containing SQL Server can be configured for automatic failback to the primary node when it becomes available
again. By default, this is set to off. First you set a preferred owner for the SQL Server service in a clustered environment; To ensure the service or application automatically moves to the correct node, select “Allow Failback” under the Failover tab. .
Auto failback saves you from having to make this change manually; however it will restart the SQL Services when it automatically fails back. Or if you don’t want to configure auto failback you’ll want to make sure that you manually fail the services
back to the more powerful node after the system has come back online.
There are details about failover cluster allows automatic failback, you can review the following articles.
http://www.mssqltips.com/sqlservertip/2672/managing-a-windows-and-sql-server-cluster-using-the-failover-cluster-manager-tool/
http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
For more information about troubleshooting Windows Server 2008 R2 Failover Clusters, you can review the following article.
http://windowsitpro.com/windows-server-2008/troubleshooting-windows-server-2008-r2-failover-clusters.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server Alwayson availability groups automation
Hi all,
I had configured SQL Server always on availability groups on windows server 2012 and it was successful.
I’ve installed and successfully configured our SQL Server 2012 AlwaysOn 2-node windows cluster servers. I've gotten AlwaysOn working great, and our
Front End servers for the Intranet will be using SharePoint 2013. The glitch is that SharePoint 2013 is configured to add databases automatically to our SQL Server 2012 back end, but NOT to AlwaysOn. As we know “we must manually find, select, back-up and then
add those new databases individually to get them into AlwaysOn."
But wait; that can be quite a task, constantly checking the SQL Server back-end servers to see what databases were created, then having to add them
into AlwaysOn, 7/24!
Im looking for an automated script or process that will check for new databases, back those new databases up in FULL mode, (for being added to AlwaysOn, of course) then
add those databases to Always On, all automatically.
Requirements:
Every time the newly created or added databases should be full backed up once in the shared location with automated script.
Newly created database should be added into always on group and should be added to available replica automatically with the TSQL script
Regards,
SQL LOVER.awaiting for responses.
Kindly help the bewlo request.
Newly created database should be added into always on group and should be added to available
replica automatically with the TSQL script and perform restoration.
There is no out of the box solution for this. You may want to created a SQL Job (PowerShell) which can detect database which is newly created and perform steps to add new database to AG.
1. take full backup.
2. Take log backup.
3. restore then on secondary.
4. Add database to AG
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Basic problem with creation of HDInsight cluster with sql-server meta db
We have been testing HDInsight capabilities in the last few days since the introduction of 3.2 I can no longer create HDInsight Haddoop cluster from the old portal https://manage.windowsazure.com with the meta data being in external sql-server (the
new portal does not yet support hdinsight) every which way of trying fails with Error and no indication as what the error is, can anyone help
ThanksHi Medz-pigh,
Can you tell me the stage where it fails? I mean did it stuck when providing metadata info on portal or during deployment it hungs? If you can tell more info it will help.
Thanks and Regards
Sudhir Rawat -
SQL Server 2012 availability groups
Hi, I'm new to SQL 2012 and availability groups. We have it setup for SharePoint 2013 for an Intranet and all is well. I migrated some ASP.NET applications from SQL 2005 and created a new group for them. It all seemed fine and was sync'd up ok but lately
I'm having to manually resume the data movement via Management Studio. The databases seem to be in a paused state although the database is up as far as the applications are concerned.
Should I have completed some kind of database upgrade prior to moving over to 2012? Is there anything I can do or check? Is there a way of automating the resume data movement rather than me manually doing this?
Thanks!Suspending and resuming an AlwaysOn secondary database does not directly affect the availability of the primary database. However, suspending a secondary database can impact redundancy and failover capabilities for the primary database, until the suspended
secondary database is resumed. This is in contrast to database mirroring, where the mirroring state is suspended on both the mirror database and the principal database until mirroring is resumed. Suspending an AlwaysOn primary database suspends data movement
on all the corresponding secondary databases, and redundancy and failover capabilities cease for that database until the primary database is resumed.
You can obviously automate this: all you need to do is check if the status is suspended and then resume with the help of T-SQL command - how about writing a job which checks it every 5 min to 30 mins. depending upon your requirement and execute the T-SQL
command to fix it.
The Command would be:
ALTER DATABASE database_name SET HADR RESUME
Sarabpreet Singh Anand
SQL Server MVP Blog ,
Personal website
This posting is provided , "AS IS" with no warranties, and confers no rights.
Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Sql Server Management Studio 2008 (MSSQL 2008) problem.
I have a problem with SQL Database and managing of them. I have a VS2010 VWD EE (Beta 2). And SQL Server Express Edition 2008. Now I have a problem with this:
TITLE: Registered Servers
Unable to read the list of previously registered servers on this system. Re-register your servers in the 'Registered Servers'
window.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1312.2+((dac_stab2).090829-0704+)
&LinkId=20476
ADDITIONAL INFORMATION:
Deserialization operation on /RegisteredServersStore/ServerGroup/DatabaseEngineServerGroup has failed.
(Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1312.2+((dac_stab2).090829-0704+)
&LinkId=20476
There is an error in XML document (0, 0). (System.Xml)
The type initializer for 'System.Xml.Serialization.XmlSerializationReader' threw an exception. (System.Xml)
Configuration system failed to initialize (System.Configuration)
Unrecognized configuration section system.serviceModel. (C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Config\machine.config
line 136) (System.Configuration)
BUTTONS:
OK
When I press Ok button it shows me another dialog:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializationException: Serialization operation on ServerGroup[@Name='DatabaseEngineServerGroup'] has failed. ---> System.Configuration.ConfigurationErrorsException: Configuration system failed to initialize ---> System.Configuration.ConfigurationErrorsException: Unrecognized configuration section system.serviceModel. (C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Config\machine.config line 136)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors)
at System.Configuration.BaseConfigurationRecord.ThrowIfInitErrors()
at System.Configuration.ClientConfigurationSystem.EnsureInit(String configKey)
--- End of inner exception stack trace ---
at System.Configuration.ConfigurationManager.PrepareConfigSystem()
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.PrivilegedConfigurationManager.GetSection(String sectionName)
at System.Diagnostics.DiagnosticsConfiguration.GetConfigSection()
at System.Diagnostics.DiagnosticsConfiguration.Initialize()
at System.Diagnostics.DiagnosticsConfiguration.get_SwitchSettings()
at System.Diagnostics.Switch.InitializeConfigSettings()
at System.Diagnostics.Switch.InitializeWithStatus()
at System.Diagnostics.Switch.get_SwitchSetting()
at System.Diagnostics.BooleanSwitch.get_Enabled()
at System.Xml.Serialization.TempAssembly.LoadGeneratedAssembly(Type type, String defaultNamespace, XmlSerializerImplementation& contract)
at System.Xml.Serialization.XmlSerializer..ctor(Type type, String defaultNamespace)
at System.Xml.Serialization.XmlSerializer..ctor(Type type)
at Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializer.WriteInternal(XmlWriter instanceWriter, Object instance, Dictionary`2 namespaces)
at Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializer.Write(XmlWriter instanceWriter, Object instance, Dictionary`2 namespaces)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializer.Write(XmlWriter instanceWriter, Object instance, Dictionary`2 namespaces)
at Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializer.WriteAllInstances()
at Microsoft.SqlServer.Management.Sdk.Sfc.SfcSerializer.Write(XmlWriter xmlWriter)
at Microsoft.SqlServer.Management.RegisteredServers.RegisteredServersStore.Serialize()
at Microsoft.SqlServer.Management.RegisteredServers.ServerGroup.Create()
at Microsoft.SqlServer.Management.RegisteredServers.RegisteredServersStore.get_DatabaseEngineServerGroup()
at Microsoft.SqlServer.Management.RegisteredServers.RegisteredServerControl.RegisteredServerControl_Load(Object sender, EventArgs e)
at System.Windows.Forms.UserControl.OnLoad(EventArgs e)
at System.Windows.Forms.UserControl.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
AppIDPackage
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/AppIDPackage.DLL
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
Microsoft.SqlServer.SqlTools.VSIntegration
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.SqlTools.VSIntegration.DLL
Microsoft.VisualStudio.Shell.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6071
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Shell.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.dll
Microsoft.VisualStudio.OLE.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6070
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.OLE.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.OLE.Interop.dll
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
SqlWorkbench.Interfaces
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SqlWorkbench.Interfaces.DLL
Microsoft.SqlServer.SqlTDiagM
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1312.2 ((dac_stab2).090829-0704 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.SqlTDiagM/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SqlTDiagM.dll
Microsoft.SqlServer.Instapi
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.Instapi/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Instapi.dll
Microsoft.VisualStudio.Shell
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualStudio.Shell/2.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.dll
Microsoft.VisualStudio.Shell.Interop.8.0
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.1826 (QFE.050727-1800)
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.Shell.Interop.8.0/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.Shell.Interop.8.0.dll
Microsoft.SqlServer.Management.SDK.SqlStudio
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.SDK.SqlStudio.DLL
SQLEditors
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SQLEditors.DLL
Microsoft.VisualStudio.TextManager.Interop
Assembly Version: 7.1.40304.0
Win32 Version: 7.10.6070
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.VisualStudio.TextManager.Interop/7.1.40304.0__b03f5f7f11d50a3a/Microsoft.VisualStudio.TextManager.Interop.dll
SqlMgmt
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/SqlMgmt.DLL
Microsoft.SqlServer.Management.UserSettings
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.UserSettings.DLL
Microsoft.SqlServer.Management.Sdk.Sfc
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1312.2 ((dac_stab2).090829-0704 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.Management.Sdk.Sfc/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.Sdk.Sfc.dll
Microsoft.SqlServer.Management.Reports
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.Reports.DLL
Microsoft.SqlServer.Management.RegisteredServersUI
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.RegisteredServersUI.DLL
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/Microsoft.SqlServer.Management.Controls.DLL
System.Design
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Design/2.0.0.0__b03f5f7f11d50a3a/System.Design.dll
Microsoft.SqlServer.Management.RegisteredServers
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1312.2 ((dac_stab2).090829-0704 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.Management.RegisteredServers/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.Management.RegisteredServers.dll
Microsoft.SqlServer.ConnectionInfo
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1312.2 ((dac_stab2).090829-0704 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.ConnectionInfo/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.ConnectionInfo.dll
ConnectionDlg
Assembly Version: 10.0.0.0
Win32 Version: 10.0.1600.22 ((SQL_PreRelease).080709-1414 )
CodeBase: file:///C:/Program%20Files/Microsoft%20SQL%20Server/100/Tools/Binn/VSShell/Common7/IDE/ConnectionDlg.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Microsoft.SqlServer.SqlClrProvider
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1312.2 ((dac_stab2).090829-0704 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SqlServer.SqlClrProvider/10.0.0.0__89845dcd8080cc91/Microsoft.SqlServer.SqlClrProvider.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
Microsoft.NetEnterpriseServers.ExceptionMessageBox
Assembly Version: 10.0.0.0
Win32 Version: 10.0.2531.0 ((Katmai_PCU_Main).090329-1015 )
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.NetEnterpriseServers.ExceptionMessageBox/10.0.0.0__89845dcd8080cc91/Microsoft.NetEnterpriseServers.ExceptionMessageBox.dll
System.Web
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
And in Label it's shows:
"Serialization operation on
ServerGroup[@Name='DatabaseEngineServerGroup'] has failed.
Then I can Log-In into database, and do just half work.
I have installed: MS Framework 2.0, 3.5, 4.0. I am using MS Windows XP SP2. It makes me crazy. Everything running okay but just this application have problems.If you are using windows XP I have a solution,it worked for me :) :)
Go to path:
%windir%\Documents and Settings\username\Local Settings\Application Data\Microsoft_Corporation\somefolder\x.xx.xx.xx\user.conig
You will find either that file is corrupted or totally blank
paste the below content [please replace somefolder with your machine's folder name]
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
allowExeDefinition="MachineToLocalUser" requirePermission="false" />
</sectionGroup>
</configSections>
<userSettings>
<Microsoft.SqlServer.Configuration.somefolder.Properties.Settings>
<setting name="WindowPlacement" serializeAs="Xml">
<value>
<WINDOWPLACEMENT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<showCmd>1</showCmd>
<ptMinPosition>
<x>0</x>
<y>0</y>
</ptMinPosition>
<ptMaxPosition>
<x>-1</x>
<y>-1</y>
</ptMaxPosition>
<rcNormalPosition>
<left>0</left>
<top>0</top>
<right>800</right>
<bottom>600</bottom>
</rcNormalPosition>
</WINDOWPLACEMENT>
</value>
</setting>
</Microsoft.SqlServer.Configuration.somefolder.Properties.Settings>
</userSettings>
</configuration> -
2 Node Hyper-V failover cluster with sql server
I have 2 IBM Servers with Server 2012 installed and both machines have SQL server express. Is it possible to create HYPER-V Failover between the 2 servers including the SQL SERVER Instance meaning if the main node fails the second server will take over.
The second will act as virtualized failover of the main node with failover instace to act as active to active approach.
I hope can someone give me an advice with my question.I have 2 IBM Servers with Server 2012 installed and both machines have SQL server express. Is it possible to create HYPER-V Failover between the 2 servers including the SQL SERVER Instance meaning if the main node fails the second server will take over.
The second will act as virtualized failover of the main node with failover instace to act as active to active approach.
I hope can someone give me an advice with my question.
Sure you can do that. But it's a long story what's better SQL Server FCI or AlwaysOn. See:
FCI Vs. AlwaysOn
http://msdn.microsoft.com/en-us/library/ff929171.aspx
(biggest issue with AlwaysOn - it does require Enterprise license so is COSTY)
Good idea to ask here:
SQL Server High Availability and Disaster Recovery
http://social.technet.microsoft.com/Forums/sqlserver/en-us/home?forum=sqldisasterrecovery
In any case you'll need either physical or virtual shared storage. For FCI to host everything and witness disk and for AlwaysOn just for witness (AlwaysOn does replication between DAS on it's own).
Good luck :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.
Maybe you are looking for
-
F110-Automatic payment program payment made in other countries
I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).
-
how can I reset my rescue email?
-
How to avoid booking of stock every time, when ever I make Delivery
Hello friends, Need your help again 1) When I am making the delivery, at the time of PGI, system asks for sale order stock. I donu2019t want to book stock of material against sales order, whenever I make delivery. How can I avoid booking of stoc
-
Replace message payload object without remove queue table
hi, i want to replace message payload object without remove queue table but i have got the "ORA-02303: cannot drop or replace a type with type or table dependents" error. is there any way to replace message payload object without remove queue table?
-
Hi Guys The source files are coming with Byte Order Mark (BOM). Because of this the Header Key field value is not being detected and the mapping fails.Is there a way to get rid of this BOM? Thanks!